SatellIte A100-220 - ATI Radeon Xpress 200M Driver update

Hello
I have a laptop Toshiba SatellIte A100-220 and I can not find the latest driver for Ati Radeon Xpress 200M, could you help me?
Advance I thank.

Which operating system do you use?
I presume that you know that you should use drivers from Toshiba support page. Have you already checked latest version there?

Similar Messages

  • ATI Radeon Xpress 200M Drivers

    Hi everyone, I have a Toshiba Satellite M50 laptop and am running Windows 7 Ultimate, and have the ATI Radeon Xpress 200M graphics card. I used the initial 8.31 Vista driver and upgraded to the 8.561 beta driver for Windows 7, through the Microsoft Update Catalog. As this is now a legacy card, I have downloaded and tried the 8.671 driver (in the Catalyst 9.11 package) from the ATI website and this did not work, only installing updates to the CCC. I don't care about the Catalyst Control Center, and am only after the driver itself.
    Since the drivers on the ATI website are in the form of an .exe package, I cannot get a hold of the appropriate .inf file for the graphics card. I was wondering if it were indeed possible to obtain a newer version than 8.561 of the graphics driver, by way of .inf file or not? I would be very grateful for any help or insight into this.
    Hardware IDs in Device Manager for my card is:
    PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179&REV_00
    PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179
    PCI\VEN_1002&DEV_5A62&CC_030000
    PCI\VEN_1002&DEV_5A62&CC_0300
    Compatible IDs:
    PCI\VEN_1002&DEV_5A62&REV_00
    PCI\VEN_1002&DEV_5A62
    PCI\VEN_1002&CC_030000
    PCI\VEN_1002&CC_0300
    PCI\VEN_1002
    PCI\CC_030000
    PCI\CC_0300

    Hi blastoise,
    As you may noticed, the latest driver for your display card is only for Windows Vista on the manufacturer's website. It seems there is no newer driver is published. Therefore, I think the most suitable driver is provided by Windows Update which is version 8.561.0.0. Please see HERE. You can also contact Toshiba directly to confirm this issue.
    Besides, does the driver you installed work properly? If not, could you please provide the error message listed in Device Manager?
    1. Click the Start Button, type Device Manager in the Search bar and press "Enter". Click Continue if necessary.
    2. Double click to expand the "Display adapter"
    3. Right click the display card and click "Properties".
    Regards,
    Linda

  • Ati radeon xpress 200m igp

    looking for Windows  graphics drivers for my old laptop.  the card is an ATI RADEON® XPRESS 200M IGP.  Thanks.

    Please provide your system model
    You have the option of using the inbox Microsoft Basic Display Driver or
    the Windows 7 driver (not fully Win 8 compatible)
    http://catalog.update.microsoft.com/v7/site/Search.aspx?q=pci%5cven_1002%26dev_5a62
      ATI Technologies Inc. - Display - ATI Radeon Xpress Series 32-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 42.0 MB 44041632    
    ATI Technologies Inc. - Display - ATI Radeon Xpress Series 64-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 81.1 MB 85032672  

  • Suspend to RAM with KMS enabled and ATI Radeon XPRESS 200M

    Per this thread, I added the file to /etc/X11/xorg.conf.d to disable glx in order to continue booting with 'nomodeset' to disable KMS after today's updates.  I've always had to boot with 'nomodeset' so that suspend/resume will work properly (I get a black screen/freeze on resume from suspend to ram). However, with this fix, my screen redraws are happening MUCH slower than before the update. Anyone have KMS enabled AND suspend/resume working with an:  ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)?
    Thanks,
    Scott
    Last edited by firecat53 (2010-11-26 18:40:22)

    Ok, sorry for a delay -- long weekend...
    Suspend + KMS have been working starting sometimes in the 2.6.35 series.
    My guess as to why you can't suspend, is your BIOS/motherboard, nothing else.
    Anyway, here is the info:
    ~$ /usr/sbin/lspci
    00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
    00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
    00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
    00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
    00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
    00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
    00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
    00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    ~$ head /var/log/pm-suspend.log
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Tue Nov 30 19:58:21 EST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux bluemoon 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010 i686 Mobile AMD Sempron(tm) Processor 3000+ AuthenticAMD GNU/Linux
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    :: wlan_wpa_supplicant down [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    Unloading kernel module b43...Done.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Tue Nov 30 19:58:24 EST 2010: performing suspend
    Tue Nov 30 20:57:03 EST 2010: Awake.
    Tue Nov 30 20:57:03 EST 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    :: wlan_wpa_supplicant up [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Tue Nov 30 20:57:20 EST 2010: Finished.
    Kernel command line: root=/dev/disk/by-uuid/8d834d14-8413-481a-9f69-3fd20dc25773 ro radeon.modeset=1
    ~$ pacman -Q xf86-video-ati
    xf86-video-ati 6.13.2-2
    ~$ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "ServerFlags"
    Option "DontZap" "on"
    EndSection
    Section "Monitor"
    Identifier "LCD Panel"
    EndSection
    Section "Device"
    Identifier "Radeon XPress 200M"
    Driver "radeon"
    Option "EnablePageFlip" "on"
    Option "EXAPixmaps" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Radeon XPress 200M"
    Monitor "LCD Panel"
    EndSection

  • Best driver for dual-screen and 3D with Radeon Xpress 200M [solved]

    I need a good graphic driver for double screen and gaming, open source or old Ati one ?
    How I do install it correctly ???
    Note : catalyst could perform better for gamers ...
    Last edited by spiky25 (2009-11-22 23:53:01)

    Sorry for the mild thread necromancy.
    At what resolution do you run the external display? According to AMD/ATI, the radeon xpress 200m supports only up to 1600x1200, but I think I've used bigger displays with no problems.

  • System crash: RC410 [Radeon Xpress 200M], xorg 1.7.6-3

    Having used FreeBSD and Ubuntu, I installed Arch Linux on my Toshiba Satellite A-135 yesterday and have been trying to find out ways to prevent the graphical desktop environment (gnome) from crashing. In fact the whole machine freezes; No key sequence works. This happens as soon as any window is opened, be it by running the browser or the file manager.
    I have done some googling on this issue of faulty driver (xf86-video-ati) that seems to be due to ATI not supporting old hardware and the newer version of X's incompatability with it. Really, the notebook is not even that old. I purchased it in 2007. While I wait for the open-source driver to get fixed or find some other workaround, I am using the 'fbdev' driver having specified it in xorg.conf.
    I will be glad if anyone can post a workaround/solution that enables the using of the ATI driver. Thanks!

    The 'pci=nomsi' kernel boot option given in the ATI documentation page did it for me! One can find it and the details of the kernel bug here:
    http://wiki.archlinux.org/index.php/ATI
    My graphic card is precisely the one -- Radeon Xpress 200M -- known to cause system crash.  Besides, I am using Kernel mode-setting too. Thanks for documenting.
    Last edited by pawn_island (2010-06-19 21:23:24)

  • Radeon RS482 (Radeon Xpress 200M) no 3D acceleration

    Hi,
    I'have a problem with opensource radeon driver.
    No have any 3D acceleration.
    lspci :
    01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
    glxinfo | grep -i opengl :
    OpenGL vendor string: Mesa Project
    OpenGL renderer string: Software Rasterizer
    OpenGL version string: 2.1 Mesa 7.6
    OpenGL shading language version string: 1.20
    OpenGL extensions:
    /etc/X11/xorg.conf :
    Section "Module"
    Load "i2c" # pour gérer la télévision
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri" # module pour l'accélération matériel
    Load "dri2" # module pour l'accélération matériel
    Load "extmod"
    Load "glx" # pour la 3D
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "int10" # ajout
    Load "vbe" # ajout
    Load "record"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "radeon"
    # Driver "ati" # wrapper générique, il choisit le bon pilote (radeon, rage128, ...)
    # Option "AccelMethod" "EXA" # choisir XAA ou EXA - XAA est le plus stable, EXA est considéré comme stable depuis le pilote 6.7.194.
    # Option "AccelDFS" "1" # mettre "1" si la carte n'est pas une AGP - s'utilise avec EXA
    # Option "AGPMode" "4" # règle le débit AGP ( "1" par défaut), pour carte AGP seulement
    # Option "AGPSize" "128" # pour carte AGP seulement
    Option "GARTSize" "64"
    Option "RingSize" "8"
    Option "BufferSize" "2"
    Option "EnablePageFlip" "1" # active 'page flipping' pour les applis 3D, parfois instable !
    Option "EnableDepthMoves" "yes"
    Option "UseFBDev" "false"
    Option "ColorTiling" "1"
    Option "RenderAccel" "true" # Active l'accélération matériel
    Option "mtrr" "on"
    Option "SubPixelOrder" "none"
    Option "DPMS" "true" # gestion de l'énergie de l'écran
    Option "DynamicClocks" "off"
    Option "DRI" "true"
    Option "NoAccel" "false"
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    Option "RENDER" "Enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    dmesg with radeon loading :
    Modules linked in: snd_hda_intel(+) snd_hda_codec radeon(+) ttm drm_kms_helper b44 drm sdhci_pci sdhci snd_hwdep snd_pcm snd_timer snd soundcore video ssb pcmcia pcmcia_core mmc_core joydev usbhid hid i2c_algo_bit led_class wmi output snd_page_alloc mii battery ac dell_laptop rfkill thermal lib80211_crypt_tkip button ricoh_mmc wl(P) ohci_hcd psmouse amd64_edac_mod dcdbas ehci_hcd evdev edac_core sg serio_raw lib80211 usbcore i2c_piix4 i2c_core cpufreq_userspace shpchp pci_hotplug k8temp cpufreq_conservative cpufreq_powersave cpufreq_ondemand powernow_k8 freq_table processor rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 dm_mod sd_mod sr_mod cdrom pata_acpi ata_generic ahci pata_atiixp libata scsi_mod
    Pid: 1776, comm: modprobe Tainted: P 2.6.31-ARCH #1 Inspiron 1501
    RIP: 0010:[<ffffffffa04cd1e3>] [<ffffffffa04cd1e3>] radeon_driver_load+0x93/0x2c0 [radeon]
    RSP: 0000:ffff88015c163e38 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: ffff88015eca8800 RCX: 0000000000000011
    RDX: 0000000001030011 RSI: 0000000000000000 RDI: ffff88015c18d000
    RBP: ffff88015c18c800 R08: 0000000000000000 R09: 0000000000000000
    R10: 2222222222222222 R11: 2222222222222222 R12: 00000000fffffff4
    R13: 0000000001030011 R14: ffffffffa0572f20 R15: ffff88015eca8bf8
    FS: 00007f9730b73700(0000) GS:ffff880028028000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000098 CR3: 000000015c963000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process modprobe (pid: 1776, threadinfo ffff88015c162000, task ffff88015c131a80)
    Stack:
    0000000000ae6500 00000000b928fdd1 0000000000000000 ffff88015eca8800
    <0> ffff88015f923000 ffffffffa0571ba0 ffffffffa0572f20 ffffffffa047f813
    <0> ffff88015f923090 ffffffff811e8006 0000000000000000 00000000b928fdd1
    Call Trace:
    [<ffffffffa047f813>] ? drm_get_dev+0x353/0x5b0 [drm]
    [<ffffffff811e8006>] ? kobject_get+0x26/0x50
    [<ffffffffa0479450>] ? drm_init+0xc0/0x140 [drm]
    [<ffffffffa0088000>] ? radeon_init+0x0/0xe8 [radeon]
    [<ffffffff81009075>] ? do_one_initcall+0x45/0x1d0
    [<ffffffff81098055>] ? sys_init_module+0x105/0x260
    [<ffffffff8100c382>] ? system_call_fastpath+0x16/0x1b
    Code: 84 9a 00 00 00 49 0f b7 cd 48 89 ab 90 03 00 00 44 89 ea 48 83 f9 1a 44 89 ad d4 03 00 00 0f 86 b4 00 00 00 48 8b 83 c0 03 00 00 <48> 8b 80 98 00 00 00 48 85 c0 0f 84 1d 01 00 00 48 89 df ff d0
    RIP [<ffffffffa04cd1e3>] radeon_driver_load+0x93/0x2c0 [radeon]
    RSP <ffff88015c163e38>
    CR2: 0000000000000098
    ---[ end trace aa456f50e680fe43 ]---
    grub :
    title Arch Linux [/boot/vmlinuz26]
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/mapper/VolGroup01-1 resume=/dev/mapper/VolGroup01-3 ro nomodeset vga=792
    initrd /kernel26.img
    /etc/modprobe.d/radeon.conf
    options radeon modeset=0
    packages used : libdrm-git and xf86-video-ati-git
    packages tested : libdrm and xf86-video-ati
    Please help me.
    Thanks

    Confirming, on Radeon M200 (r300) (ATI Radeon Xpress 1100) with and without KMS (modeset={0,1}). Resuming results in
    olvar wrote:a corrupted screen.
    Forcing VSync ON partially solves the problem (the screen is significantly less corrupted), but it cannot be used as a workaround.
    Looking forward to any solutions / bugfixes.
    There are also https://bugzilla.redhat.com/show_bug.cgi?id=468894 and https://bugzilla.redhat.com/show_bug.cgi?id=522070 but both are now closed
    That seems to be synchronization problem, maybe hsync?
    $ uname -a
    Linux dotdoom 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Mobile AMD Sempron(tm) Processor 3400+ AuthenticAMD GNU/Linux
    Also I'm having troubles with hibernation, it looks like trying to hibernate, but resumes immediately writing something to disk and then turns off. After power on it does not read the image, just makes a normal boot. Although I'm not sure it is related
    Last edited by dot.doom (2010-10-14 19:20:39)

  • [Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

    Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
    I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option.  Any recommendations?
    Any info is greatly appreciated.

    Quote from: dannol48 on 23-June-05, 02:25:47
    The RS480M2-IL haa a CnQ option in Bios. 
    Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
    Danno
    Hello Danno ^^¿''
    Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed)  with the 3DMARK  2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
    Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
    thanks and enjoy the time 
    PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

  • Overclocking ATI Radeon xpress 1270

    Hi guys
    I have an msi notebook ER 710 with ATI RADEON XPRESS 1270 and i wonder if I can overclock the vga card. If any body knows how i can overclock it please give me some information and how can it be done?
    10x

    You can use Ati Tool ==> https://forum-en.msi.com/index.php?topic=107133.0 should able to do that.
    But however OC VGA notebook is not recommended.

  • [HOW-TO] Ati Radeon & Kernel 2.6 - Updated

    [HOW-TO] Ati Radeon & Kernel 2.6
    Updated on new ati-drivers 4.3.0
    [CONTENTS]
        1.1 Requirements
        2.0 Compiling Kernel
        2.1 Configuring Bootloader [GRUB]
        3.0 Building & Generating modules
        3.1 Pacthing modules
        3.2 Compiling modules
        3.3 Adding modules boot runlevel
        4.0 fglrxconfig
        4.1 Xorg.conf   NEW!!
    [1.1] Requirements
        (All Intel & AMD users)
        1. Ati Radeon 9xxx (Mine 9600 Sapphyre pro)
        2. Kernel 2.8.x (Current 2.8.1)
        3. wget, rpmunpack, cpio
        4. PKGBUILD [FILE]
        5. ati-drivers.install [FILE]
        6. fglrx-2.6-vmalloc-vmaddr.patch   New!!!
    Those are code for listed files:
    PKGBUILD New!!!
    pkgname=ati-drivers
    pkgver=3.11.1
    pkgrel=1
    pkgdesc="Proprietary (binary) drivers for ATI Radeon Cards."
    url="www.ati.com/support/driver.html"
    depends=('xfree86')
    install="$pkgname.install"
    source=(http://www2.ati.com/drivers/linux/fglrx-4.3.0-$pkgver.i386.rpm)
    #md5sums=('9f7802ee0bbdeb5172673027056e789d')
    # build-time deps: rpmunpack, cpio, gzip
    build() {
    cd $startdir/pkg
    rpmunpack < $startdir/src/fglrx-4.3.0-$pkgver.i386.rpm | gzip -d | cpio -idmuv
    chmod 755 -R .
    mv opt/kde3 opt/kde
    mkdir -p opt/gnome/share
    mv usr/share/gnome/apps/ opt/gnome/share
    rm -rf usr/share/gnome
    usr/share/applnklib/modules/fglrx/{fglrx*.o,fglrx_info.txt}
    usr/X11R6/bin/LICENSE.{GPL,QPL}
    usr/X11R6/bin/*.bz2
    ati-drivers.install   New!!!
    post_install() {
    cat << EOF
    NOTE
    To create an fglrx module for your system, do:
    cd /lib/modules/fglrx/build_mod
    ./make.sh
    cd ..
    ./make_install.sh
    Make sure you have your full kernel tree at /usr/src/linux
    Then initialize "fglrxconfig" to create an XF86Config
    for your graphics card.
    EOF
    post_upgrade() {
    /bin/true
    pre_remove() {
    /bin/true
    op=$1
    shift
    $op $*
    fglrx-2.6-vmalloc-vmaddr.patch New!!!
    --- firegl_public.c 2004-03-17 17:00:29.000000000 -0500
    +++ /lib/modules/fglrx/build_mod/firegl_public.c 2004-07-18 16:09:46.000000000 -0500
    @@ -2010,8 +2010,8 @@
    pMmPage = virt_to_page(kaddr);
    #endif /* LINUX_VERSION_CODE < 0x020400 */
    - atomic_inc(&(pMmPage->count)); /* inc usage count of page */
    +// atomic_inc(&(pMmPage->_count)); /* inc usage count of page */
    + get_page(pMmPage);
    #if LINUX_VERSION_CODE >= 0x020400
    // __KE_DEBUG3("vm-address 0x%08lx => kernel-page-address 0x%pn",
    // address, page_address(pMmPage));
    [2.0] Compiling kernel
    <*> MTRR
    e poi
    <M> /dev/agpgart (AGP Support)                                                           
    < >   ALI chipset support                                                                 
    < >   ATI chipset support                                                                 
    < >   AMD Irongate, 761, and 762 chipset support                                           
    < >   AMD Opteron/Athlon64 on-CPU GART support                                             
    < >   Intel 440LX/BX/GX, I8xx and E7x05 chipset support                                   
    < >   Intel i865 chipset support                                                           
    < >   NVIDIA nForce/nForce2 chipset support                                               
    < >   SiS chipset support                                                                 
    < >   Serverworks LE/HE chipset support                                                   
    <M>   VIA chipset support                                                                 
    < >   Transmeta Efficeon support                                                           
    [*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)                       
    < >   3dfx Banshee/Voodoo3+                                                               
    < >   3dlabs GMX 2000                                                                     
    < >   ATI Rage 128                                                                         
    < >   ATI Radeon                                                                           
    < >   Matrox g200/g400                                                                     
    < >   SiS video cards                                                                     
    make dep && make clean bzImage modules modules_install
    [/code]
    when finished,mount boot partition (if not already mounted)
    [code]
    mount /boot
    [/code]
    and copy kernel image to the boot directory, so the new kernel loads after computer restart. Pay attention to not overwrite existent kernels images in boot partition. For security issues rename it as ***_new.
    [code]
    cp arch/i386/boot/bzImage /boot/vmlinuz_new
    [/code]
    [2.1] Configuring Bootloader [GRUB]
    Edit your boot-loader config file.
    I currently use grub instead of lilo.
    [code]
    nano /boot/grub/menu.lst
    [/code]
    Add a new sub-menu (this is an example) Check on the forum how to set-up a bootloader).
    [code]
    # (0) Arch Linux
    title  Arch Linux  [/boot/vmlinuz_new]
    root   (hd0,3)
    kernel (hd0,1)/vmlinuz_new root=/dev/discs/disc0/part4 ro
    [/code]
    REBOOT
    [3.0] Building ati-drivers
    Make a directory under /var/abs/local called ati
    [code]
    mkdir /var/abs/loca/ati
    [/code]
    copy in it the two files PKGBUILD ati-drivers.install
    [code]
    cp /path/to/file/PKGBUILD /var/abs/local/ati
    cp /path/to/file/ati-drivers.install /var/abs/local/ati
    [/code]
    start building package
    [code]
    makepkg -c
    [/code]
    if all goes well, this will be the output
    [code]
    [root@CippaLippa ati]# makepkg -c
    ==> Making package: ati-drivers
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    ==> .......
    ==> .......
    ==> Compressing man pages...
    ==> Stripping debugging symbols from libraries...
    ==> Stripping symbols from binaries...
    ==> Generating .PKGINFO file...
    ==> Copying install script...
    ==> Generating .FILELIST file...
    ==> Compressing package...
    ==> Cleaning up...
    ==> Finished making: ati-drivers  (Tue Feb 10 15:11:13 CET 2004)
    [root@CippaLippa ati]#
    [/code]
    It downloads necessary files and generates a file called ati-drivers-3.9.x.pkg.tar.gz
    Install it using:
    [code]
    pacman -A ati-drivers-3.x.x.pkg.tar.gz
    [/code]
    This installation generates a folder in /lib/modules/fglrx
    Change directory
    [code]
    cd /lib/modules/fglrx
    [/code]
    [3.1] Pacthing modules
    To patch modules simply copy the two files .patch listed on top in this directory. Intel users must only install fglrx-2.6-vmalloc-vmaddr.patch, AMD users both.
    [code]
    cp /path/to/patch/fglrx-2.6-vmalloc-vmaddr.patch /lib/modules/fglrx
    [/code]
    change directory
    [code]
    cd build_mod
    [/code]
    to patch the file firegl_public.c
    [code]
    patch -b firegl_public.c ../fglrx-2.6-vmalloc-vmaddr.patch
    [/code]
    It's time to compile the modules
    [code]
    sh make.sh
    [root@CippaLippa build_mod]# sh make.sh
    ATI module generator V 2.0
    ==========================
    initializing...
    probing for VMA API version...
    cleaning...
    patching...
    make[1]: Leaving directory `/usr/src/linux-2.6.x
    build succeeded with return value 0
    duplicating results into driver repository...
    done.
    ==============================
    You must change your working directory to /lib/modules/fglrx
    and then call ./make_install.sh in order to install the built module.
    ==============================
    [/code]
    change directory as you see on screen
    [code]
    cd /lib/modules/fglrx
    [/code]
    and compile in
    [code]
    sh make_install.sh
    [/code]
    if will be no errors in output, module fglrx were perfectly compiled in /lib/modules/2.6.x/kernel/drivers/char/drm/ and named "fglrx.ko"
    [3.2] Adding modules boot runlevel
    open /etc/rc.conf
    [code]
    nano /etc/rc.conf
    [/code]
    go to line MODULES= and add
    [code]
    agpgart via-agp fglrx rtc  <== make sure always in this order
    [/code]
    (if your motherboard is "VIA" equipped, else check what do you have: the same configured in kernel under /dev/agpgart (AGP Support)   
    [4.0] fglrxconfig
    Ati-drivers comes with a modified xf86config, utility to generate XF86config files.
    Run
    [code]
    fglrxconfig
    [/code]
    and a welcome screen appear
    [code]
    ==============================================================================
    ATI - FIRE GL - BE THE CREATOR
    ==============================================================================
    This program will create the ATI "XF86Config-4" file
    - based on your selections - for the below listed boardtypes...
             - ATI Radeon 8500 / 9100
             - ATI FireGL 8700 / 8800 / E1
             - ATI FireGL T2
             - ATI Radeon 9000
             - ATI Radeon 9200
             - ATI Radeon 9500
             - ATI Radeon 9600
             - ATI Radeon 9700
             - ATI Radeon 9800
             - ATI FireGL Z1 / X1 / X2
             - ATI Mobility M9
             - ATI Mobility FireGL 9000
             - ATI Mobility M9PLUS
    The "XF86Config-4" file usually resides in /etc/X11.
    Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
    [/code]
    follow the on-screen steps leaving default settings. Configure only mouse, keyboard, screen frequencies and resolution. At least when prompt for:
    [code]
    External AGPGART module:
    external agpgart module execute this on the commandline (as root):
        /sbin/insmod agpgart
    or alternatively configure your system to auto load the module.
    Do you want to use the external AGP GART module (y/n)? [y]
    [/code]
    be sure to answer "YES".
    [4.1] Xorg.cong New!!!
    Xorg configuration file, resides in /etc/X11.
    It is XF86config renamed and Will replace soon it, with the new video system based on Xorg.
    This is my xorg.conf file:
    [code]
    Section "dri"
        Mode 0666
    EndSection
    Section "Module"
        Load        "dbe"      # Double buffer extension
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
        Load        "type1"
        Load        "freetype"
        Load        "glx"   # libglx.a
        Load        "dri"   # libdri.a
    EndSection
    Section "Files"
        RgbPath    "/usr/X11R6/lib/X11/rgb"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        ModulePath "/usr/X11R6/lib/modules"
    EndSection
    Section "InputDevice"
        Identifier    "Keyboard1"
        Driver    "Keyboard"
        Option "AutoRepeat" "500 30"
        Option "XkbRules"    "xfree86"
        Option "XkbModel"    "pc105"
        Option "XkbLayout"    "it"
    EndSection
    Section "InputDevice"
        Identifier    "Mouse1"
        Driver "mouse"
        Option "Protocol"   "ImPS/2"
        Option "ZAxisMapping"   "4 5"
        Option "Device"     "/dev/usbmouse"
    EndSection
    Section "Monitor"
        Identifier  "Monitor0"
        HorizSync   31-96
        VertRefresh 55-160
        Option "DPMS"
    EndSection
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    EndSection
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
        #Option                              "NoDDC"
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
        Option "DesktopSetup"               "0x00000000"
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "unspecified"
        Option "VRefresh2"                  "unspecified"
        Option "ScreenOverlap"              "0"
        Option "NoTV"                       "yes"     
        Option "TVStandard"                 "NTSC-M"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
        Option "Capabilities"               "0x00000000"
        Option "VideoOverlay"               "on"
        Option "OpenGLOverlay"              "off"
        Option "CenterMode"                 "off"
        Option "PseudoColorVisuals"         "off"
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        BusID "PCI:1:0:0"    # vendor=1002, device=4150
        Screen 0
    EndSection
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600"
            ViewPort    0 0  # initial origin if mode is smaller than desktop
        EndSubsection
    EndSection
    Section "ServerLayout"
        Identifier  "Server Layout"
        Screen "Screen0"
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    [/code]
    REBOOT
    Start in X with kde, gnome or othet window manager.
    If X does not start you maybe made something wrong, retry from the beginning. Else if it starts, check if DRI os working
    [code]
    fgl_glxgears
    [/code]
    if it is working, a rotating cube will appear in a new windows, and if it is so.....
    ENJOY
    **SORRY FOR MY ENGLISH **

    Using kernel 2.6.2
    I'm starting over again but now cannot get the PKGBUILD to complete.  I had this problem this morning as well, but after editing the PKGBUILD file did eventually get it to complete.  This is the output of makepkg -c using the PKGBUILD as posted:
    [root@Arch2 ati]# makepkg -c
    ==> Making package: ati-drivers  (Wed Feb 11 16:11:02 GMT 2004)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    ==>     Downloading fglrx-glc22-4.3.0-3.2.8.i586.rpm
    --16:11:02--  http://www2.ati.com/drivers/linux/fglrx … 8.i586.rpm
               => `fglrx-glc22-4.3.0-3.2.8.i586.rpm'
    Resolving www2.ati.com... 62.25.100.58, 62.25.100.32
    Connecting to www2.ati.com[62.25.100.58]:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 4,365,039 [audio/x-pn-realaudio-plugin]
    100%[====================================>] 4,365,039     55.23K/s    ETA 00:00
    16:12:27 (50.80 KB/s) - `fglrx-glc22-4.3.0-3.2.8.i586.rpm' saved [4365039/4365039]
    ==> Validating source files with MD5sums
        fglrx-glc22-4.3.0-3.2.8.i586.rpm ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    ./lib/modules/fglrx/build_mod/2.6.x/Makefile
    ./lib/modules/fglrx/build_mod/agp.h
    ./lib/modules/fglrx/build_mod/agp3.c
    ./lib/modules/fglrx/build_mod/agp_backend.h
    ./lib/modules/fglrx/build_mod/agpgart.h
    ./lib/modules/fglrx/build_mod/agpgart_be.c
    ./lib/modules/fglrx/build_mod/firegl_public.c
    ./lib/modules/fglrx/build_mod/firegl_public.h
    ./lib/modules/fglrx/build_mod/i7505-agp.c
    ./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC2
    ./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC3
    ./lib/modules/fglrx/build_mod/make.sh
    ./lib/modules/fglrx/build_mod/nvidia-agp.c
    ./lib/modules/fglrx/fglrx.2.4.18-17.7.x.o
    ./lib/modules/fglrx/fglrx.2.4.18-17.8.0.o
    ./lib/modules/fglrx/fglrx.2.4.20-6-SMP.o
    ./lib/modules/fglrx/fglrx.2.4.20-6.o
    ./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent-SMP.o
    ./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent.o
    ./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.entbigmem-SMP.o
    ./lib/modules/fglrx/fglrx_info.txt
    ./lib/modules/fglrx/make_install.sh
    ./opt/kde3/share/applnk/fireglcontrol_kde3.desktop
    ./usr/X11R6/bin/LICENSE.GPL
    ./usr/X11R6/bin/LICENSE.QPL
    ./usr/X11R6/bin/fgl_glxgears
    ./usr/X11R6/bin/fglrx_xgamma
    ./usr/X11R6/bin/fglrxconfig
    ./usr/X11R6/bin/fglrxinfo
    ./usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2
    ./usr/X11R6/bin/fireglcontrol.qt3.gcc3.2.bz2
    ./usr/X11R6/bin/fireglcontrol.qtstatic.gcc2.96.bz2
    ./usr/X11R6/include/X11/extensions/fglrx_gamma.h
    ./usr/X11R6/lib/libGL.so.1.2
    ./usr/X11R6/lib/libfglrx_gamma.a
    ./usr/X11R6/lib/libfglrx_gamma.so.1.0
    ./usr/X11R6/lib/modules/dri/fglrx_dri.so
    ./usr/X11R6/lib/modules/drivers/fglrx_drv.o
    ./usr/X11R6/lib/modules/linux/libfglrxdrm.a
    ./usr/include/GL/glxATI.h
    ./usr/share/applnk/fireglcontrol.kdelnk
    ./usr/share/gnome/apps/fireglcontrol.desktop
    ./usr/share/icons/ati.xpm
    ./usr/share/pixmaps/ati.xpm
    ./usr/src/ATI/fglrx_panel_sources.tgz
    ./usr/src/ATI/fglrx_sample_source.tgz
    21763 blocks
    /usr/bin/makepkg: line 23: usr/share/applnklib/modules/fglrx/fglrx*.o: No such file or directory
    usr/X11R6/bin/LICENSE.GPL: line 2: syntax error near unexpected token `('
    usr/X11R6/bin/LICENSE.GPL: line 2: ` The Qt GUI Toolkit is Copyright (C) 1994-2000 Trolltech AS.'
    /usr/bin/makepkg: line 25: usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2: cannot execute binary file
    ==> ERROR: Build Failed.  Aborting...
    [root@Arch2 ati]#
    I seem to be going backwards!

  • Need new ATI Radeon 1400 display driver for Satellite A100-788 PSAA9E

    Hello ,
    I search for New drivers for my ATI radeon mobility 1400 because in toshiba.com the last date drivers is 13/09/07.
    Thx.

    Hi
    This seems to be a Toshiba European notebook series and therefore you should search on the Toshiba European driver page.
    The newest ATI driver on the European driver page is a version 8.31.100.3.2 fro Vista and v 8.292-038742C for Win XP
    Unfortunately newer driver is not available
    Greetings

  • Ati radeon xpress 200 series driver installing windows 8.1 pro black screen

    dell optiplex 320 running Windows 8.1 standard.  The display is listed as ATI RADEON XPREES 200 in the device manager. 
    It is using the driver provided by the operating system - ATI Technologies dated 10/2/2010 and version 10-2_legacy_vista32-64_dd_ccc and ATI_ATI-Radeon-Xpress-X1100_A03_R172873.  From a cold boot the blue Windows logo appears and then the mouse cursor
    in the middle of the screen, but the start screen with the tiles is not displayed.  Maybe this sounds weird, but I think the start screen and tiles is there, but just not being shown on the screen.  There appears to be nothing there, but I can move
    the cursor around on the black screen and click in frustration.  Then I press the power button and the laptop enters sleep mode.  Once in sleep mode I press power again to resume the computer and then the lock screen shows up and I can see the start
    screen and tiles and everything works like it should.  This only happens from a cold boot.  If the computer was on and restarted it does not happen.  Has this happened to anyone else?  Any suggestions?  I will check for a newer display
    driver from ATI.  The only driver on the Windows Update Catalog is for Windows Vista.

    mouse cursor in the middle of the screen, but the start screen with the tiles is not displayed.
    Usually it is nVidia users who complain of this.  An explanation would be that you are seeing your secondary monitor display in an Extended display configuration.  When you press Win- etc. it would show on your primary monitor (which you can't
    see).  So, press Win-P anyway and imagine that you can see its display.  Then you would press CursorUp, Enter and switch display configurations so you could see something. 
    only happens from a cold boot.
    Then there is a feature in a boot that makes this change.  Try using Win-P again when you can see it to see what the configuration is then.
    Robert Aldwinckle

  • Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

    I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds  montior switches to power-saving mode.
    So here we go.
    That's xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card1"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    and that's the log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
    (++) Using config file: "xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Screen "Screen1" (1)
    (**) | |-->Monitor "Monitor1"
    (**) | |-->Device "Card1"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeonhd"
    (II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
    (II) Module radeonhd: vendor="AMD GPG"
    compiled for 1.6.0, module version = 1.2.5
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
    RV505 : Radeon X1550, X1550 64bit.
    RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
    RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
    R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
    RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
    RV535 : Radeon X1300, X1650.
    RV550 : Radeon X2300 HD.
    RV560 : Radeon X1650.
    RV570 : Radeon X1950, X1950 GT; FireGL V7400.
    R580 : Radeon X1900, X1950; AMD Stream Processor.
    R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
    RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
    RV620 : Radeon HD 3450, HD 3470.
    RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
    FireGL V3600/V5600.
    RV635 : Radeon HD 3650, HD 3670.
    RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
    R680 : Radeon HD 3870 X2.
    M52 : Mobility Radeon X1300.
    M54 : Mobility Radeon X1400; M54-GL.
    M56 : Mobility Radeon X1600; Mobility FireGL V5200.
    M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
    M62 : Mobility Radeon X1350.
    M64 : Mobility Radeon X1450, X2300.
    M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
    M68 : Mobility Radeon X1900.
    M71 : Mobility Radeon HD 2300.
    M72 : Mobility Radeon HD 2400; Radeon E2400.
    M74 : Mobility Radeon HD 2400 XT.
    M76 : Mobility Radeon HD 2600;
    (Gemini ATI) Mobility Radeon HD 2600 XT.
    M82 : Mobility Radeon HD 3400.
    M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
    M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
    RS600 : Radeon Xpress 1200, Xpress 1250.
    RS690 : Radeon X1200, X1250, X1270.
    RS740 : RS740, RS740M.
    RS780 : Radeon HD 3100/3200/3300 Series.
    RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
    R700 : Radeon R700.
    M98 : Radeon M98 Mobility.
    RV730 : Radeon HD4670, HD4650.
    M96 : Radeon M96 Mobility.
    RV710 : Radeon HD4570, HD4350.
    (II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
    (II) Primary Device is:
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    [14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(0): Selected ShadowFB.
    (II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(0): Detected an RV670 on an unidentified card
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): PCIE Card Detected
    (II) RADEONHD(0): Getting BIOS copy from PCI ROM
    (II) RADEONHD(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0xa000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Calling ASIC Init
    (II) RADEONHD(0): ASIC_INIT Successful
    (II) RADEONHD(0): Analog TV Default Mode: 1
    (II) RADEONHD(0): Found default TV Mode NTSC
    (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(0): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(0): VideoRAM: 262144 kByte
    (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
    (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
    (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
    (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
    (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
    (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(0): Detected VGA mode.
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
    (II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(0): TMDS A: Sensed Output: DVI
    (II) RADEONHD(0): Setting TMDS A to incoherent
    (II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
    (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
    (II) RADEONHD(0): EDID data for W2253
    (II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
    (II) RADEONHD(0): Year: 2009 Week: 5
    (II) RADEONHD(0): EDID Version: 1.3
    (II) RADEONHD(0): Digital Display Input
    (II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
    (II) RADEONHD(0): Gamma: 2.20
    (II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEONHD(0): First detailed timing is preferred mode
    (II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    (II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    (II) RADEONHD(0): Supported established timings:
    (II) RADEONHD(0): 720x400@70Hz
    (II) RADEONHD(0): 640x480@60Hz
    (II) RADEONHD(0): 640x480@75Hz
    (II) RADEONHD(0): 800x600@56Hz
    (II) RADEONHD(0): 800x600@60Hz
    (II) RADEONHD(0): 800x600@75Hz
    (II) RADEONHD(0): 832x624@75Hz
    (II) RADEONHD(0): 1024x768@60Hz
    (II) RADEONHD(0): 1024x768@75Hz
    (II) RADEONHD(0): 1280x1024@75Hz
    (II) RADEONHD(0): 1152x870@75Hz
    (II) RADEONHD(0): Manufacturer's mask: 0
    (II) RADEONHD(0): Supported standard timings:
    (II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
    (II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    (II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEONHD(0): Monitor name: W2253
    (II) RADEONHD(0): EDID (in hex):
    (II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
    (II) RADEONHD(0): 0513010380312078eaee91a3544c9926
    (II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
    (II) RADEONHD(0): 0101010101011a3680a070381f403020
    (II) RADEONHD(0): 3500fe221100001e023a801871382d40
    (II) RADEONHD(0): 582c4500fe221100001c000000fd0038
    (II) RADEONHD(0): 4b1e530f000a202020202020000000fc
    (II) RADEONHD(0): 0057323235330a202020202020200081
    (II) RADEONHD(0): EDID vendor "GSM", prod id 22236
    (II) RADEONHD(0): Using EDID range info for horizontal sync
    (II) RADEONHD(0): Using EDID range info for vertical refresh
    (II) RADEONHD(0): Printing DDC gathered Modelines:
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Output DVI-I_1/digital connected
    (II) RADEONHD(0): Output DVI-I_1/analog disconnected
    (II) RADEONHD(0): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(0): Output DVI-I_2/digital disconnected
    (II) RADEONHD(0): Output DVI-I_2/analog disconnected
    (II) RADEONHD(0): Using exact sizes for initial modes
    (II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
    (II) RADEONHD(0): RandR 1.2 support enabled
    (==) RADEONHD(0): RGB weight 888
    (==) RADEONHD(0): Default visual is TrueColor
    (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
    (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
    (**) RADEONHD(0): Display dimensions: (490, 320) mm
    (**) RADEONHD(0): DPI set to (99, 152)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) Loading sub module "shadow"
    (II) LoadModule: "shadow"
    (II) Loading /usr/lib/xorg/modules//libshadow.so
    (II) Module shadow: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) RADEONHD(0): Using ShadowFB
    (==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(1): Selected ShadowFB.
    (II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(1): Detected an RV670 on an unidentified card
    (II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(1): PCIE Card Detected
    (II) RADEONHD(1): Getting BIOS copy from PCI ROM
    (II) RADEONHD(1): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0x0000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Calling ASIC Init
    (II) RADEONHD(1): ASIC_INIT Successful
    (II) RADEONHD(1): Analog TV Default Mode: 27049664
    (II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(1): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(1): VideoRAM: 262144 kByte
    (II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
    (WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
    (II) RADEONHD(1): default to: 20480
    (II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(1): Detected VGA mode.
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
    (II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): No outputs definitely connected, trying again...
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): Unable to find initial modes
    (EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
    (EE) RADEONHD(1): Failed to detect a connected monitor
    (II) RADEONHD(1): Destroying TMDS A
    (II) RADEONHD(1): Destroying DAC B
    (II) RADEONHD(1): Destroying TMDS B
    (II) RADEONHD(1): Destroying DAC A
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
    (II) UnloadModule: "radeonhd"
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
    (WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
    (==) RADEONHD(0): Backing store disabled
    (==) RADEONHD(0): Silken mouse enabled
    (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
    None
    (II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
    (II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
    (II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
    (II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
    (II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
    (II) RADEONHD(0): DPMS enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) RADEONHD(0): Setting screen physical size to 510 x 290
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) ImPS/2 Logitech Wheel Mouse: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    Last edited by warnab (2009-10-21 18:53:12)

    i'm getting then such log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    Primary device is not PCI
    (==) Using default built-in configuration (21 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default vesa Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (EE) No drivers available.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  • Satellite A100 (PSAA9E) - Can't install display driver for Windows 7

    I have a problem with installing official Toshiba Windows 7 x32 ATI x1600 driver.
    After unpacking it should install.exe be executed, I believe, but it's not; nothing happens. Going to Setup.exe with manual install, then I don't see Catalyst Control Center & Display Driver in the list, just Catalyst install Manager & vcredist. After installation these components (CCC & DD) are not present.
    Any ideas?
    P.S. Same problem with official Toshiba Vista32 ATI x1600 driver.

    Hi mate,
    Have you already installed other drivers for the notebook? I mean the chipset driver, this driver must be installed first.
    And are you sure that you have ATI display driver? Some Satellite A100 models were delivered with nVidia graphic card as far as I know.
    By the way, what happens if you install the driver manual in device manager via advanced installation?

  • Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control

    i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
    But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
    i have now this drivers :
    http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
    Manufacturer:ATI
    Hardware:ATI Radeon HD 3100
    Software type:Catalyst Software Suite
    Version:11.8
    File Size:51.38Mb (53881048 bytes)
    Released:16 Aug 2011
    Uploaded:27 Aug 2011
    Views:159
    Downloads:55
    System:
    Windows XPWindows XP Media Center
    Description:Catalyst Software Suite for ATI Radeon HD 3100
    Package Includes:
    Display Driver
    OpenCL Driver
    ATI Integrated Driver
    Catalyst Control Center
    Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
    im not sure if its not t o `BIG` driver for this graph card..
    cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....

    Hi
    Here you can download the latest Catalyst software:
    http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx

Maybe you are looking for

  • Counter

    Hi, I have LabView Version 6.i and a Timer/Counter Card PCI-6602 from ni. I have an incremental encoder attached to it. I want to measure the frequency of the incremental emcoder an write it into a excel-sheet. Therefore I modified the measure_freque

  • Adobe Media Encoder CC - I Can Not Download.

    http://www.adobe.com/support/downloads/product.jsp?platform=Windows&product=160 JUST DOİNG UPDATE... CAN NOT İNSTALL.... PLEASE HELP.....

  • How to display html code in posts?

    I thought it was < code> and < /code> to show the actual html.

  • Workspace Error while registering with shared services

    I am installing Hyperion 11.1.1.3. Shared Services is installed on server1 Workspace is installed on server2 Now when I configure workspace, registration with shared services failed. Error: "(May 25, 2011, 02:39:25 PM), com.hyperion.cis.config.CmsReg

  • Save and Email Form

    Hi, I have a form which has a Submit via email button configured on it. The form itself is an application form with lots of fields for customers to fill in. Once they have filled in the form, I want them to click the Submit button which will then ope