Satellite A100 bios update does not work correctly

Hi,
I have a Satellite A100-153 PSAA9E and using Vista OS.
How do I install the new bios?? I run the .exe and nothing happens it shows that it extracts some files and then a notepad text appears that says something like this.
' INVENEC Pre-Flash Script for SanAntonio10
' 09/26/2006 Version 1.0.0.3
On Error Resume Next
'=== Declare Variables & Objects
Dim WshObj, objArgs
Dim WMIObj, chipset
Dim InfoStr, WorkPath
Dim VideoType
Dim fso, oFile etc....
and then an error appears that says if the SanAntonion10 BIOS590MP.exe is installed correct.
pls help

Hm, sounds a little bit weird. I would suggest you to do the following:
go to the drivers download page
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Download the latest common modules if available and RE-download the BIOS update.
Then try it again. If this doesnt help then perform a full system recovery, download the BIOS update and then it MUST work.
Greets

Similar Messages

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Focus under Win2k does not work correctly

Hi,
we've found out that the focus does not work correctly under Windows 2000 in
Seamless Mode (App is a Windows Application running on Windows Terminal Server
2003), the same application has no problems under Windows XP, Apple Macintosh
and Linux.
Example: The application has a button which pop's up a small calendar window
giving that window focus. In Tarantella under Win2k however you just see the
window popping up shortly and then going in the background. As the window is in
the background and you can't get the window back and you also cannot work
further in that application as the rest is inactive.
Only way is to do a right-click on the application in the taskbar, which brings
the window in the foreground again. What makes this problem even harder to
analyze is, that it sometimes even works correctly (around 3 of 10 times).
We've mostly recognized this with modal windows. The native client does not have
this problem, however as far as I know it does not support seamless mode.
2. The second problem we got is, that if you click with the mouse into the
initializing Window while the application starts up after you have clicked on an
application Link in SGD (I mean the Pre-Login window of Windows which shortly
shows up just before the Login Process begins),
the application is not started seamlessly but is started within that window and
you have no chance but closing an restarting the application to get it in
seamless mode. This is seen on all Client Operating Systems by us and not only
Windows 2000.
The Client runs:
Windows 2000 SP4 all updates installed
Java: 1.5.0-5
Browser: IE6.0 and Firefox 1.0.7
Server: Windows 2003 Terminal Server (all updates installed)
Tarantella: 4.20.909
I hope that someone has at least a workaround.
Regards
Carsten

I have organized some testcases attached are 3 Test Programs which work
nice natively but got these problems under Tarantella under every Windows
Operating System (the error is not Windows 2000 as I previously mentioned but
also occurs on Windows XP).
The interesting thing is that the Test Program made with .NET does not show this
problem.
Could someone please test these and tell if this error is reproducible on your
systems as well ?
Run these Testprograms natively, they show no misbehavior.
Execute this from a SGD Webtop Session in Seamless Mode, see that
the Modal window is not modal but shifts into the background on every 2 -3 click.
Regards
Carsten
[ModalTestPrgs.zip]

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

How do I get a refund for an App that does not work correctly?

How do I get a refund for a App (Express Newspapers) that does not work correctly?

How to report an issue with Your iTunes Store purchase

Since I upgraded to Yosemite, my CS5 does not work correctly.

Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
Help!

sharonfrombury wrote:
Is there no contribution from Apple support community for this question yet? I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford. Come on Apple, some ray of light please.
If you read the Terms of Use you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

Satellite L300 (PSLB8C-0H901X) does not work

My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no POST, nothing, Get power and charge lamp when pluged in nothing else, any known issues? Any fixes, Thanks in advance for your help.

Hmm sounds like a serious hardware issue.
If you are a lucky man the issue could be related to RAM module.
The RAM modules can be replaced easily. The memory bay is placed at the bottom of the unit secured by one screw.
But the question is if its really related to RAM.
Well, you will know this if you would replace/check this
Otherwise I recommend asking an professional notebook technician for a help

SB Titanium Fatal1ty Champ - Frontpanel does not work correctly

?SB Titanium Fatalty Champ - Frontpanel does not work correctly? good morning,
i use the fatalty with the - champ - frontpanel. Unfortunately this panel does not work correctly. that means is have sound at the headphones and can use the mic but i cannot change the volume (HP and Mic)and cannot change?game mode, cmss-3d and crystalizer.
i?tested this card on two operating systems (one of the totally new) but the frontpanel does not work.
I try the driver from CD, the newest which will be found by creatives autoupdate driver search and i check youp pak but none of them will help.
Internal Soundcard of my mainboard is deactivated.
The hardware is not damaged - i try two different titanium cards with two frontpanels...
here my system:
[color="#0000ff" face="Book Antiqua">MSI DKA790GX Platinum , Cooler Master CM 690
AMD Phenom X4 9950BE @ 3,2GHZ, Logitech Z-4e
4GB Kingston HyperX DIMM 2 GB DDR2-800 Kit
MSI N260GTX-T2D896-OC @707MHZ
Xilence RedWing Gaming Edition Modular - 750 Watt
Creative X-Fi Titanium Fatalty Champion Series
Windows Vista Ultimate 32-Bit; Samsung T260
so...what can i do now? i have no idea what to test now?
brgds
stefan

So nobody actually has any idea what the problem is? I'm not the thread-bumping type, but this is a very annoying issue and if anyone has any useful information I would greatly apprecaite it.

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank You

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

Satellite A100 bios update does not work correctly

Similar Messages

Maybe you are looking for