Satellite A100 - Display damaged, which PN can I use to replace it?

Hi
I have a Satellite A100-151 (PSAA9A-01Z01DGR). The display is damaged. Which Part-Numbers can I use to replace it? Exact PN please. Thank you in advance

You can buy a display from the ASP in your country.
The guys could order compatible Satellite A100 parts directly from the Toshiba head stock.
I have goggled a little bit and found these useful details about Toshiba Satellite A100 LCD screens:
http://www.screentekinc.com/toshiba__Satellite__A100-series-laptops-lcd-screens.shtml
Maybe this short info helps.

Similar Messages

IMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

iMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

After doing a bit more research, the 2010 iMacs do appear to have a third cable connecting to the hard drive, for the internal temp sensor. This would appear to be the block of 8 pins that are on almost all drives, but they are normally intended for jumpers. Unfortunately I was unable to find any documentation or specs that would indicate this pin block connects to the internal temp sensor on either standard (non-Apple) WD Black or Seagate 7200.12 drives.
I did find some info that may be of some use:
WD: Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive.iFixit: Replace the hard drive, how do I connect the hard drive thermal sensor?
Apple Technician Guide: iMac 2010 27" (mid-2010)
Various discussion threads I found through google searching indicated some people succeeded with installing an external temp sensor on the body of the drive.
Sorry I couldn't help more.

In which trigger can i use go_item() in oracle forms 6i?

Hi,
I have a problem with go_item.
I tried executing go_item() in triggers like key_next_item, pre_text_item, post_text_item & when_validate_item.
But none of them seemed to be working.
I searched for other possibilities in the site, where i found a solution of using trigger ' when_timer_expired ' with ' when_validate_item ' ,
but when i tried to create trigger, i did not find that trigger (when_timer_expired) in the list at all.
I'm using oracle form builder 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
A trigger with go_item() must be created when tab is pressed.
In which trigger can i use go_item() ??
Thank You.

from help:
Restricted Built-in Subprograms
Restricted Built-ins affect navigation in your form, either external screen navigation, or internal navigation. You can call these Built-ins only from triggers while no internal navigation is occurring.
Restricted Built-ins cannot be called from the Pre and Post triggers, which fire when Oracle Forms is navigating from object to another.
Restricted Built-ins can be called from the When triggers that are specific to interface items, such as When-Button-Pressed or When-Checkbox-Changed. Restricted Built-ins can also be called from any of the When-New-"object"-Instance triggers and from key triggers.
Unrestricted Built-ins do not affect logical or physical navigation and can be called from any trigger.
The Built-in descriptions include a heading, Built-In Type, that indicates if the Built-in is restricted or unrestricted.

Which cable can I use to connect my ipad to my iphone

Which cable can I use to connect my ipad to my iphone when I need to connect to the internet when not in a Wi-Fi hotspot.?

Your question has already been asked and answered in your duplicate post.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

I have a 3.06 Ghz Intel cor 2 duo 4GB 1067 Mhz DDR3. Which update can i use.

Yosemite. Back up your data, check your applications for compatibility, and download it from the Mac App Store.
If desired, you can instead buy a download code for Lion or Mountain Lion from the online Apple Store.
(123967)

If I need to burn multiple audio CDs which software can I use?

If I need to burn multiple audio CDs which software can I use?

Personally I use the freeware SimplyBurns or Burn for all burning
http://www.macupdate.com/find/mac/Burn

Which software can i use for recovery management that will allow me to use DVD's instead of Flashdsk

which software can i use for recovery management that will allow me to use DVD's instead of Flashdisk? I find DVD's easier to use. i am using windows 10

As the other posters wrote in order to take a movie file and turn it into a DVD that can be played in standard DVD players you need a DVD authoring application. That you need a separate program to create the DVD is standard procedure and has been that way since the beginning. All Apple produce that can produce video files require an external authoring program. iMovie, iPhoto and Final Cut all do this.
One other thing I will comment on is your choice of output format. You will almost certainly be disappointed with the video quality of your finished DVD if you put a HD video on a SD DVD. Unless you plan to burn a bluray disk you will get a better quality video if you output as SD if you plan to burn to an SD disk.
regards

Which iMovie can i use on a g5 dual processor

which iMovie can i use on a g5 dual processor

According to this:
http://www.macrumors.com/2013/10/22/some-users-with-older-copies-of-ilife-and-iw ork-having-difficulties-upgrading-to-new-versions/
it is available from the App Store for $15. It doesn't show when I launch AppStore but that may be because I already have later versions. You will have to search for it on the web. As part of iLife '09 its pretty old now but Ebay appears to have some copies available.
Best of luck!
Geoff.

AppleCare for Macbook - Which one can I use M8852LL /A or /B ?

AppleCare for Macbook -
Which one can I use M8852LL /A or /B ?
/A is older version /B newer version , I think both are good for Macbook, but can't get a definite answer from Apple. Anyone here know ?
Macbook 1.83 Mac OS X (10.4.7) Combo Drive, 2G, 120G HD

more to say...
Deciding factor should be price.I've found these folks have the best price on AppleCare.
http://lacomputercompany.com
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.7)

What can be used for replacing SELECT SINGLE *   ?

What can be used for replacing SELECT SINGLE * for improving the performance in the following statements?
SELECT SINGLE * FROM REGUV
   WHERE LAUFD = G_WLAUFD "RUN DATE ,SY-DATUM
     AND LAUFI = P_LAUFI. "IDENTICATION NO
SELECT SINGLE * FROM T100
   INTO CORRESPONDING FIELDS OF G_T100_WA
    WHERE SPRSL = G_T_IALLMESS-MSGSPRA
      AND ARBGB = G_T_IALLMESS-MSGID
      AND MSGNR = G_T_IALLMESS-MSGNR.
SELECT SINGLE * FROM TBTCO
   INTO CORRESPONDING FIELDS OF TBTCO
    WHERE JOBNAME = FS_JOBNAME.

If you need all the fields and you know that only one record exists then u need to use select single * only. You can improve the performance by specifying key fields in the where clause of select statements. If the structure of the work area or internal table in which you are fetching the data is same as that of the database table then no need to use corresponding fields clause.
Best Regards,
Vibha
*Please mark all the helpful answers

Can someone tell me is the A1342 EMC2350 motherboard can be used to replace a A1342 EMC2395,,,yes, I am aware of the GHz difference.

Can someone tell me is the A1342 EMC2350 motherboard can be used to replace a A1342 EMC2395,,,yes, I am aware of the GHz difference.

Can someone tell me is the A1342 EMC2350 motherboard can be used to replace a A1342 EMC2395,,,yes, I am aware of the GHz difference.

Satellite A100 display blank but external vga works

Hello,
my two year old Satellite A100-847 display stopped working. I used external VGA monitor for a few days,
then switched back to laptop LCD and found out it doesnt work. It doesn't show anything , only the grey backlight.
The LCD doesn't work even at boot nor does in WIN XP, nor at battery power or AC. I have tried to dismantle the display according to some guide
to check if the signal cable is firmly at its place in the connection to LCD, but it hasn't solved the problem.
I use the original BIOS and somewhat updated nvidia display driver, they worked fine up to now, so I suggest its not a bios/driver problem.
(but maybe it is, so I tried to install original display driver with no effect. I dont want to try to flash new bios, and end up with f....ed up display and bios too)
The video output to external monitor is completely fine, from boot or in win.
Does anybody see a solution, please? Or should I only go to service provider...
thank you
Pepe

Hello
In my opinion you should definitely go to the nearest Authorized service provider. They can say for sure what the problem is and, of course, order by Toshiba the right part for exchange.
It is definitely hardware issue and it can be the FL inverter, especially if you see the something on the screen but almost black and grey.

Is there any way by which I can not use Thunar Sys Tray icon?

I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
Is there any way by which I can make it to not pop up?

Trilby wrote:
I haven't used thunar for a while - but I don't remember it ever doing this before. I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
Are you sure this isn't some other tool, like a clipboard manager? Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
Last edited by chosentorture (2015-01-11 00:13:32)

When I open Firefox, the display is not stable, can't use the scroll bar or mouse properly.

Power Mac (non-intel) using OS 10.5.8. Changed batteries in mouse, problem is the display when opening Firefox is not stable on vertical axis. Can't use the scroll bar or mouse control in vertical axis.

Hello tikimonboo, [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#w_turn-off-hardware-acceleration Turn off hardware acceleration], and check it again.
thank you

Help - which FCP can I use with my Mac processor (2 x 2.5Ghz) G5?

I am so utterly confused by this G5. My daughter suggested I buy one as she is a graphic designer and highly recommended a Mac. However, I couldn't afford a new machine, so found a Mac processor G5. It looks like a decent machine, but the bewildering OS versions, specifications and expensive software has me baffled.
I wanted to buy Final Cut Pro to edit video footage but as soon as I started looking, I found that almost every site said that whatever version of FCP I looked at, it would not run on my G5. I bought OS 10.4 Tiger as that seems to be the last OS that can be used on the machine. The spec is: OS 10.4 Tiger (all up to date), 2 x 2.5Ghz Mac (PPC) processors, plus as much RAM as could be crammed into it.
Out of desperation (and a frustrating experience with Adobe Premiere Elements 7) I bought Premiere Elements 9 as it had a PC and Mac licence in the same package. Guess what - I was told the software would be excellent on my G5 but as usual, the advice was incorrect; Premiere Elements 9 will only run on an Intel-equipped Mac. It is fine on my PC though.
Can anyone help? Please be a person who owns or has owned a PPC G5 and preferably with FCP loaded. Or someone who knows the real thing to do - I cannot afford any more duff info.

The last and latest version of final cut to run on PPC (AND intel by the way) was FCP 5.1, which shipped as part of Final Cut Studio1. Good luck trying to find a copy-- This was the universal cross grade that you got by sending your disks to Apple.

Satellite A100 - Display damaged, which PN can I use to replace it?

Similar Messages

Maybe you are looking for