Satellite A100 (PSAA9): How to get Vista HotStart buttons to work?

Bios: Latest v5.10
Problems:
1. Internet Explorer button launches IE correctly when logged in, but if pressed when machine is off, the machine is powered on and Vista boots normally, but IE is not launched as expected after boot is complete.
2. Windows Media Player button does not launch Windows Media Player as expected when logged in under Vista.
Tried all registry edits detailed at: http://www.microsoft.com/whdc/system/platform/firmware/hotstart.mspx but no success.
Device manager reports three unknown devices (two ACPI PNPC032: these are the HotStart buttons--HKLM\SYSTEM\CurrentControlSet\Enum\ACPI\PNP0C32\ and one ACPI\TOS1901 with yellow exclammation mark and missing driver--Toshiba Firmware Linkage Driver?).
Thanks.

Thanks. Yes, installing VAP turned off one of the two yellow exclammation marks. The two 'unknowns' (HotStart - no driver needed) and the one yellow exclammation I have reported in my original message are the status after installing VAP. VAP's 'Toshiba Button Support' utility doesn't work. Also HWSetup is not included.

Similar Messages

  • Any ideas on how to get my home button to work like it should?

    I have the third generation iPad and have been having intermittent problems with the home button.  The iPad seems to work just fine,
    but sometimes the home button doesn't do anything.  If I am in Safari and want to change to Mail, for example, the only way to get that done
    is to turn the iPad off, let it rest a short time, turn it back on and then go to the screen I want.  I can navigate within an app, but can't change apps
    without going through the above...a real hassle!  I had an appointment with the Genius Bar (Have Apple Care), but then the Home button started
    working for a while and at this time of year, I really don't want to go to the Apple Store!  Any ideas?  Thanks for your help.
    Mary Lou

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Satellite A500-17X: How to get new backlight keyboard to work?

    Hi there
    I recently had to replace the keyboard on my A500-17X (PSAR3E-00N005EN) and I decided to replace it with the backlit model of the same keyboard. The original keyboard wasn't backlit but I thought i'd give it a go anyway as it was the same price.
    I installed it into my laptop and everything is working fine apart from the backlight function.
    There was even a port for the power ribbon to go into so it is definately installed properly. I read on other forums that it is sometimes an issue with the BIOS or HWsetup but my BIOS doesn't give me the option for it and neither does HWsetup.
    I was just wondering whether there is a way of getting the backlight to work on the keyboard.
    Perhaps a different driver or changing the BIOS/HWsetup somehow?
    Would appreciate any answers!
    Regards
    James

    I believe there is no way to activate the backlight through drivers or BIOS settings. You may need to send the notebook to a Toshiba Repair center to get it activated.

  • How to create a complete new image for Satellite A100 PSAA9E ?

    My Satellite A100 PSAA9E is so incredible slow that I think the only option is to uninstall everything. Mean how can I restore my laptop to its original condition inlc. latest driver units.
    best regards,
    stef

    Hi,
    Before making a new installation you can clean your system using software like TuneUp utilities. it's shareware but you can use it free for a month. It cleans the registry, removes duplicated files, and...
    If you want to restore to it's original condition, use recovery disks or Hdd recovery image (Pressing F8 on startup). If you didn't burn and hdd recovery image gone, you can order from Toshiba for money or get windows copy for installation (all the drivers you can find on Toshiba driver page)
    Greets

  • Satellite A100 (PSAA9) Display Driver for Windows Vista

    Hi Everyone,
    This link doesnt work so I didnt install my display driver for Windows Vista and system performance look really terrible. I wondering nobody use Satellite A100 (PSAA9) and Windows Vista. Because I was searching this driver on internet but i coudnt fint it anywere. This situation made me so sick.
    How can I warn or send e-mail to Toshiba customer support about broken link. Or anyome know direct download address for Vista driver? Please help me asap :(
    15/02/07 Display Driver nVidia Windows Vista 97.54
    Thanks for your help,
    Mehmet from Istanbul

    Hi Daniel,
    Thank you for post and advise. I downloaded Satellite P100 (PSPA0E) nVidia display driver but it doesnt work. Its look same but problem is doesnt support my display card. Its really strange and Toshiba doesnt fix yet :S
    15/02/07 Display Driver nVidia Windows Vista 9.7.5.4 World Wide
    http://support.toshiba-tro.de/tools/vista/nvi/display-vista-9754.zip

  • Wrong nvidia drivers for Satellite A100 (PSAA9)

    I downloaded nvidia drivers 97.45 but this driver recognizes my GeForce Go 7600 card as NVIDIA Quadro NVS 110M. Is there something wrong with the drivers?
    At nvco.inf I found that there is only support for the latter card. What is happening?

    I wrote here last week but nobody answer me. I have Satellite A100-PSAA9 and driver doesnt work on Windows Vista. It says "This driver compatible with Wista Vista" so I'm using Windows Vista Ultimate also Turkish language. I was thinking maybe problem is Turkish version but I see it is not.
    I called Toshiba Turkey customer support but they said "We didnt test yet Vista driver, please bring your laptop here. Maybe we will report this Toshiba Europe and they will release new driver soon". I dont want to bring it anywhere, I want some solution.
    NVIDIA GeForce Go 7600 doesnt work with Windows Vista Ultimate. Nvidia.com on web sites not release yet any GeForce Go Vista Driver. What does it mean?
    Message was edited by: orcamehmet

  • Cannot record audio from wave on Satellite A100-PSAA9

    Why I can not record realtime Audio Conference with the included RealTec Driver on my Toschiba A100?
    Record Options given just, "Microphone-Line In-CD" but Wave is Missing, why?
    I have another Notebook from Asus with RealTec Driver and there is it possible, on my Toshiba not, why?

    Dear all,
    I've read so many posts where people want to record music they hear on their Satellite Notebooks (either wave, or sounds from the internet) and it seems that cornelius solved the "realtec driver" problem - that doesn't meen that it's really a problem of realtec - (where there are only three mixer categories) quite well. But I tried a little - because I don't want to spend 30$ for a new driver and found a cheaper solution (finally I hope, it works at least on my Satellite A100-PSAA9).
    What you need is:
    first, a program that may record your sounds to mp3 or wave or whatever, I use No23Recorder - but there are lots of other programs working very well. Second you need to buy (mine cost 1) a jack plug (in german: Klinkenstecker) with one male and two female slots. Third, a stereo cable with one jack plug at each end of it (2)
    Than you can start recording by putting the jack plug into the headphone slot of your Notebook; than putting the stereo cable into one of the female slots of the jack plug and the other one into the microphone slot of your Notebook. To listen to the things you want to record, put a headset into the free slot of the jack plug - and start recording ;-) !
    So if you have enough money and you don't like a bit of cable salad, than I suggest you choose cornelius's way. If you are a poor student like me, perhaps you should try mine?
    Cheers, Kat

  • Answer: to How can I get the reset button to work.

    How can I get the reset button to work?: Answer
    Thanks to everyone who helped on this. You are awesome. Especially Ned!!  Posted here because I was unable to add more to the existing post.
    Here is the question:
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
    ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
        at flash.display::DisplayObjectContainer/removeChild()
        at AddATree2/onReset()
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
      Here is the answer:
    //when you click the reset button everything is removed from the stage
        //except the star, baclground, and reset button (trees and greeting REMOVED)
        public function onClear(Event:MouseEvent):void
                if (tree3) removeChild(tree3);
                if (tree2) removeChild(tree2);
                if (webText) removeChild(webText);
                if (tree) removeChild(tree);
                clickCount = 0;

    This is the answer to what to put in the onclear function.

  • HT5012 How do I get the meddle button to work on my iphone

    How do I get the meddle button to work on my iPhone

    I Cannot use the meddle button on my p
    iPhone

  • How to get list of buttons count

    how to get list of buttons count in the oracle web page (similar to child objects concept in QTP for getting buttons count in a page)

    Hi Rakesh,
    I think you are looking for something like this:
    Using Powershell to list all users that had completed
    a password reset within the last 30 days
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • How to get micro sd card to work

    how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

    You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

  • How to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

    how to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

    I think I got a little ahead of myself explaining my problem, so let me clarify...
    Only the one iMac is having the network file deletion problem, but it is included in the network user logon problem.  So 4 out of 5 of the iMacs have had or are having logon problems with network users accounts using mobile accounts on the systems.  2 of the 4 I have wiped and started over on and the other 2 have different network accounts being used by the primary system users.  The 5th iMac has not caused any problems except I forgot to mention that the USB on it seems flaky.
    So we are apparently full of problems. 

  • How can I get my home button to work again

    How can I get my home button to work again

    Well, if your Home button is broken, you won't be able to reset your phone, and if the Sleep/Wake button won't turn your phone on, it's a trip to the Apple store.

  • Does anyone know how to get an animated screen saver working

    Hi I have a imac desktop not even a year old.  Does anyone know how to get an animated screen saver working please. Its a gimp screen saver and is it safe to use on my mac? 

    Go to the website from where you got the screensaver from and read its system requirements and instructions for installation. 

  • Getting the exit button to work

    ....how do I get this exit button to work on my posted project please.
    Currently is does not close down the "movie" so I have to have a slide telling users
    to close their tab/window/browser to exit.
    Many thanks in anticipation
    Grandpa70

    Hi there
    Please take a look at the link below.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for

  • Unable to delete file 10.7.3

    I made a garageband file(.band) and now when I try to delete it, it says "The item "Hey.band" can't be moved to the Trash because it can't be deleted."  I have tried reparing disk permissions with disk utility. Help!!

  • HP LaserJet Pro 200 color MFP M276nw - Cold reset

    Hi, I have setted a password that I don't remember. How can I reset the printer to the factory default? Many thanks P.S. This thread has been moved from Printers - LaserJet to Multifunction and All-in-One - HP Forums Moderator

  • Callback event user_command does not exist

    can anybody assist me in this error in hierarchy alv reports.. i got the error like Callback event user_command does not exist thanks in advance.. bye-- deepa Message was edited by:         pradeepareddy punnam

  • Advanced Mapping question.

    All, we have 2 input messages, that need to be mapped into the output message. <source1> <response><id>1</id><cat>prodid</cat><value>PRD01</value></response> <response><id>1</id><cat>name</cat><value>Name01</value></response> <response><id>1</id><cat

  • Is it my imagination, or is this a bad idea? NTFS external as a Mac drive

    I've always heard NTFS and Mac's didn't get along too well. Today I found out that Seagate is selling NTFS drives as "Mac" drives. Here's a link to their spec sheet: http://www.seagate.com/www-content/product-content/backup-plus-fam/backup-plus-d esk