Satellite A105 Reboot, will not start up

Hi....
Laptop belongs to my wife and this morning I am told that it will not start up.
Problem is .... Begins to start and shows symptoms of previous post by tommy1980murf.
Quick flash of a blue screen with text, then moves onto options for Safe Start, Safe network start ...etc...
No matter which optoin is chosen the laptop goes through the process bringing up the Windows XP logo then abruptly shuts down almost like a reboot. Process automatically starts over again and again.
Options on immediate power up are F2 and F12.
Does anyone have any advice to offer?
Thanks in advance for your help ...Andy

WIll it boot into Safe Mode?  If so right click on the My Computer Icon and select Properties.  Click on the Advanced Tab, then the Setting sbutton by Startup and Recovery.  Now make sure that the Automatically Restart checkbox is NOT checked then OK your way out.  Now when the blue screen appears the system will stop giving you a chance to read it and tell us EXACTLY what it says.  Not something like, EXACTLY WORD FOR WORD.  The lines you will be needing to post will be the ones in this picture http://www.pcstats.com/articleimages/200409/BSOD_2​.gif that state:
STOP: and a string of NUMBERS (they are zeros not letter O's)
and the
Driver_IRQL_NOT_LESS_OR_EQUAL line.
Also look to see if they list any specific driver, file, or program.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

  • New Satellite Pro L300 will not start up or operate

    My new laptop will not start operating.  I have done everything by the book in regard to installation, but once it asks for my user name and password, it goes to a page where it says "Preparing your system".  Then after about 10 mins it goes back to the sign in page with my user name and password, and repeats the whole thing.  
    How do I fix this?  The laptop was bought new from ebay as a gift.

    Getting a DOA is so random that it probably won't matter when you place your order. Right out of the box,the machine should start up instantly when you press the power button. Yours doesn't.
    It sounds like it arrived with a dead battery and the power adaptor is not charging the battery. Even so, it should start up from the power adaptor alone. It could be that the power adaptor is not being recognized.
    If you still have it, you could try resetting the SMC, which could possibly get things working again:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    Your satisfaction is important to Apple. If your machine has problems out of the box, they would rather give you a replacement immediately than to mess around with one which obviously has a problem of some sort. The one you return will go to the repair depot and the problem will be found and repaired if possible. Then it goes to the online store and is sold as a refurbished machine.
    A power issue like yours may be simple to fix, or it may not be. The last thing you want to do with an expensive brand new machine is to find out it is defective in some way and have to send it off for repair. You would much rather just give back the defective machine and get another one that is not defective, and I think Apple realizes this.
    There's really no reason to wait before submitting a new order--you can do it at your convenience.
    Good luck!

  • Toshiba Satellite A305-S6872 Will not start up

    I have the above mentioned computer and it is 2 years old. Last year in January the hard drive crashed and had to have new one installed at Best Buy. Now it will not start up. When I turn it on the Toshiba screen displays with F2 and F12 options. Then the creen goes black and the following displays:
    Intel UNDI, PXE-2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation
    For realtek RTL8101E/8102E PCI-E Ethernet Controller v1.07 (080320)
    PXE-E61: <edia test failure, check cable
    PXE-MOF: Exiting PXE ROM
    No bootable device -- insert boot disk and press any key
    I insert the recovery CD and it says windows loading files then has a screen that says Selecting a Process: Toshiba Recovery Wizard or System Recovery Options. I choose System Recover Options and then choose English language and US keyboard layout. Then the following screen comes up: Select an operating system to repair .... If you do not see your operating system listed click Load Drivers to load drivers for your hard disks. When I choose Load Drivers I do not know where to find the OS driver. When I click Next and choose Startup Repair it says it is unable to fix the problem automatically.
    I don't want to choose Toshiba recover Wizard because it says it will erase everything. Does anyone have any suggestions on how to fix this problem? 

    The exact same thing happened to me yesterday Feb 5!!!
    During normal use of windows 7 the computer crashed and went through the same boot procedure as described by the previous poster.
    Now I can't do anything with my hard drive. I tired everything. I even tried restoring it from the backup image that I have, but it said that it cannot find hard drive!
    I do not have Toshiba Recovery. Can I download it from somewhere?
    Does anyone have any suggestions? After booting from Win 7 Recovery Disk, I even tried fixing the MBR and partitions, but I would always get an error message that the system doesn't support the software I tried using (guessing because it's 64bit?)
    Please, any suggestion is most welcome and appreciated!!!
    Thanks,
    Djape

  • Satellite L450D-13U will not start at all

    Yesterday the screen on my L450D when blank and then the machine closed down.
    Now it will not start at all.
    There are no lights on display when the power cable is attached.
    When the start button is pressed all that happens is there is a momentary flash of the On light (not sure if that's the right name) and the DVD light.
    You can also hear the fan starting up but that immediately goes off.
    That's all that happens.
    I've tried without the battery, tried discharging the battery.
    Has my laptop just died?
    Is there any hope or should I just move on?

    I will agree with checking your RAM.
    The best way to do so before you buy anything is to check each stick.
    Remove the battery and AC cord, and press the power button several times to make sure the system is fully discharged.
    Once it is discharged, ground yourself and pull the RAM cover. Remove the top stick ONLY. Plug the laptop back in, and try to boot it.
    If you get nothing, swap the stick you pulled for the one that is still in the system, and try again.
    After that, if it still does not want to boot up, take it to a shop. It could be something as simple as the BIOS battery being dead, or a burnt out power mosfet.

  • Satellite M115-S3154 will not start Windows XP

    Opened new post per Jerry concerning my 3yr old Satellite: M115-S3154 w/ Windows XP Media Ctr Ed 2005
    Yesterday upon start up, I immediately rec'd message stating:
    - "windows did not start successfully - recent hardware or software changes might have caused this"
    - it gave options to restart in the 3 different Safe Modes, last known configuration and start normally - none of these worked. I've tried numerous times yesterday and today with absolutely no luck.
    When I shut laptop down 2nites ago, it seemed like it shut down extremely fast?! Today I realized that battery yellow light was on and thought maybe it wasn't charged enough. Charged for over 2hrs, have a blue light, but still had same experience as above.
    - I removed and replaced battery - no luck
    - I removed and replaced HDD - no luck
    I just now, followed your advice on pressing F8 immediately after start - however, there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop - what I do have is
    = the 3 different Safe modes - tried all these, no help
    = Enable Boot Logging - tried this, no help
    = Enable VGA Mode
    = Last Known Good Configuration... - tried this, no help
    = Directory Services Restore Mode (Windows domain controllers only) - tried this, no help
    = Debugging Mode -    tried this, no help
    = Disable automatic restart on system failure
    = Start Windows Normally - tried this, no help
    = Reboot - tried this, no help
    = Return to OS Choices Menu
    I attempted the Microsoft Knowledge Base article suggested by Jerry -
    Advanced troubleshooting for general startup problems in Windows XP - but no help.
    I also tried MS article 310353 - How to configure WinXP to start in a "clean boot", but under Method 1, the downloadable guided help would not run on this computer i'm using to figure out the Toshiba problem. Method 2 of this guide requires you to be able to open windows - pretty dumb since I can't get windows to run in first place! So I'm still stuck.
    I do have the original Toshiba Recovery and Applications CD - I have many files and pics that I do not want to lose.
    thanks roo

    Satellite M115-S3154  
    there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop
    That was for the Windows Vista thread you jumped in to.
    = Disable automatic restart on system failure
    Did you try this one? Instead of a reboot, it should give you a blue screen with the STOP error and possibly the file responsible. We could use that information.
    Ihave many files and pics that I do not want to lose.
    If the hard drive is still okay (there's no reason so far to doubt that), we should be able to rescue the files.
    One way is to put the hard drive in an enclosure and plug that into another computer.
    You can also make a bootable CD with tools. Let us know.
    -Jerry

  • Satellite A105-S4211 Will not keep correct Time

    I have a Satellite A105-S4211 running Windows XP SP2.  A few months back, it stopped keeping the correct system time.  I suspected it was the CMOS battery.  How do I replace the battery?  Can it be replaced?

    Try DFU mode and then restore to factory settings/new iPod. Not from backup          
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If you still then have the problem yo have a hardware problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Satellite L655D-S5050 will not start

    Hello! I have owned my Satellite L655D-S5050 for a little over a year, and this is the first major problem it has given me.  I'll try to explain as best as I can. A few days ago, I was using my computer as I usually do, and closed the lid when I was finished using it. I have my computer set up to hibernate when I close the lid. I came back about 20 minutes later, and found that my computer was still on, but the screen was blank. I tried several different things, but I eventually had to do a hard reboot. When I rebooted the computer, the screen remained blank and the fan ran at full speed. The BIOS screen never appeared, and Windows never started. The HDD access light never lit up, and I could not hear any HDD activity occurring. I tried pressing CTRL+ALT+DEL to reboot, but it didn't do anything. I had to do another hard reboot. After pressing the power button again, the same thing happened, and it happens every time I try to start the computer. This is where I am currently at. Has anyone else experienced this before? Anybody have any possible fixes? Thanks in advance!!

    I just got my computer to start up!!  What I did was similar to the "towel trick". I turned on the computer, closed the lid, and then covered the computer with my bed's comforter. After about an hour or so, I noticed that the fan was no longer running full-speed, but was still running. I held down the power button to turn off the computer, then pressed it again to turn it on, and was greeted by the Toshiba logo! After trying (and failing) a startup repair, Windows is now running as it should.  I am now pretty sure that this is being caused by a hardware failure. Based on what I've heard from a few other Toshiba Satellite owners, this appears to be the result of the solder joints on the southbridge failing, and therefore breaking the connection between the southbridge chip and the motherboard. I truly hope Toshiba looks into this, and if it is found to be a manufacturing defect, will respond properly.  Anyway, I am sure that this will happen again in the future, but for now I can use my computer again! I'll let you all know what happens.  EDIT:I tried restarting the computer, and it once again failed to start. After the towel trick, I got it running again, and am currently using my computer! It is obvious that this is just a temporary fix, but it's better than nothing.

  • Satellite P105-S9337 will not start

    I just had a customer bring in a Satellite P105-S9337 laptop. She said that at one point she did a system restore and then someone called her and they did something in her system - details are pretty sketchy there. Anyway, when I got it, I tried to boot it up, there are no beep codes; there is no flicker of video. I have tried to boot with the hard drive in; hard drive out; with a boot CD, without; reseated the memory modules; put a different hard drive in but still no video. I even tried hooking it to an external display - no video. I know in a desktop, I would look at the video card and/or mother board - any other thoughts on this?? Thanks.

    Satellite P105-S9337
    Just try a system reset and see if that makes any difference. Power off the computer, unplug the AC from laptop, remove battery, press and hold down the power button for 30 seconds, replace battery and AC, power on, if/when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, and try to reboot into Windows.
    Please let us know if it makes any difference. Good luck.
    Mike

  • Firefox will not start until reboot

    I am using FF newest version, win 7, etc. I have a very strange problem. Sometimes, once every 2-4 days, my FF will not start when the computer first start. That's when the computer cold boot, I click on FF and nothing happens. I looked in task manager and there is no "firefox.exe" running. If I reboot the machine, now it boots properly. I tried clicking on the shortcut on desktop, in "All Program" or navigate to the location of "firefox.exe" on disk. I have no fancy addon's. Google TB, Download helper, Ad block plus, and Skype addon, noscript, siteadvisor, DNA (bittorrent client for Asus), Chatzilla. Any suggestion on how I can diagnose/fix this problem? tx

    Hello friend, i have a suggestion:
    Sometimes my Firefox closes and the same thing happens... So I close the process, on the Task Manager (famous ctrl + alt + del on Windows) and start Firefox again. Try it!:D
    []'s

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

    After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

    In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
    If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
    1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
    2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
    3. After creating the second partition, close Disk Utility and install OS X on the second partition.
    4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
    5. After doing that, repeat the step 1.
    6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
    7. Close Disk Utility and install OS X on the first partition.
    After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

  • After downloading an update, firefox says "your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now" and will not start.

    Firefox will not start, or allow windows xp to uninstall the program. When I attempt to start the program, firefox says "your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now? It gives the same message after rebooting, and will not start, or uninstall. I also downloaded it again, same thing.
    == This happened ==
    Every time Firefox opened
    == I downloaded an update.

    Follow '''''cor-el's''''' advice in this post:
    https://support.mozilla.com/en-US/forum/1/606173

  • IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    Try this:
    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • My Mac will not start up i have tried safe reboot and verify file from disk utility to no avail am reinstalling Yosemite but couldn;t do it to recovery and its taking hours any ideas please

    Followed some instructions to reboot as will not start and its taking ages any ideas please

    Slow down and write clearly. What you're writing doesn't make sense. You need to write exactly what the problem is, and make understandable. Otherwise, no one will respond to you help request. 
    This (I May have found solution in 7 Mac start u options every os x user should know on a forum , gives recovery mode etc I had started to try to download yosemite again but that's what was taking forever! So I stopped it going to try the 7 options listed if not appointment at Genius - note to all back up your work, pictures etc I will be debased if they cannot recover them...) is slang. We don't speak slang.

  • My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    Have a look at these. And please say what OS you have.
    http://support.apple.com/kb/ts1411
    http://support.apple.com/kb/ts1367

Maybe you are looking for

  • ERROR ON INSTALLATION PROCESS!!!

    please could someone help me!!! i already have iTunes and was trying to download the new version (7.0). i got through to the main download process with the iPod ad on it and then an error comes up with something about quicktime and the eroor code HRE

  • Photoshop Installer failed to initialize. Help?

    Hello adobe! When trying to download a trail of photoshop the installer resulted in the following issue: Installation Failed      Your installation encountered errors. Installer failed to initialize. This could be due to a missing file. More troubles

  • Photo Page with lots of pix - any way to jump to the last page?

    I have a photo album with 112 pix in it, and it's set to display 21 photos per page w/ 3 columns. This makes for a total of 6 pages. The way the page navigation shows up, at least in Safari, is as follows: < 1 2 3 4 > Oddly, in iWeb it shows: < 1 2 3

  • Passing literal as bind variable in jena

    Dear all, We are able to use bind variables using the RDFVID id. However if we want to check for a literal using the jena/joseki adapter we are not able to perform the same action. In our case the literal is of type string. We are using: * WLS 12.1.0

  • Error When Starting VM Failed to create memory contents file

    Hi, I"m experiencing issue with a VM that has previsoulsy been snapshotted. The snap shots have been since deleted via the Hyper V Manager. The snap shots were not applied to the VM. Also no .avhd files have been deleted via Windows Explorer When I s