Satellite A105-S2061: Fatal error occurred. Code: 0x57
I just installed service pack 3 and when I reboot my computer I keep getting this message. Fatal error occurred. This program will be terminated. Code: 0x57.
I have a Satellite Series A105-S2061 notebook computer.
Are there any known fixes for this problem?
Hi
What application causes this error message?
Is this the Toshiba Power Saver?
If yes, then try to reinstall the Power Saver again.
If the message will still persist then only a radical solution can be successful; this would be the Toshiba Recovery disk and you would have to reinstall the OS again
Im not sure if this issue has something to do with SP3 or not but possibly there is some compatibility issue with some installed applications and SP3.
Greets
Similar Messages
-
Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
RichHi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I am installing R12 on Oracle Enterprise Linux and gettiing above errors.
++++++++ Platform++++++
(I) OS: OEL 4 64-bit update 7 ( installed from DVD if that matters)
[root@arun2 vmware]# uname -a
Linux arun2.devar.com 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:04:35 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@arun2 vmware]# more /etc/redhat-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 7)
(II) Apps: R12 64-bit (latest available on web released on Jan 13, 2009)
[root@arun2 rapidwiz]# ./RapidWizVersion
Oracle Applications Rapid Install Wizard
Version 12.0.4.6
(c) Copyright 2000-2006 Oracle Corporation. All rights reserved.
(III)H/W: Dell(insiron 530) Intel quad core with 6GB RAM 1TB disk
+++++++ rapidwiz+++++
1) Downloaded x86-64bit ebusiness suit from oracle site
2) unzipped all packages
3) installed recommend Linux rpms
[root@arun2 vmware]# more /tmp/orarpm.2.sh
rpm -Uvh binutils-2.15.92.0.2-25.x86_64.rpm
rpm -Uvh compat-db-4.1.25-9.i386.rpm
rpm -Uvh compat-db-4.1.25-9.x86_64.rpm
rpm -Uvh control-center-2.8.0-12.rhel4.5.x86_64.rpm
rpm -Uvh gcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh gcc-c++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh glibc-2.3.4-2.41.i686.rpm
rpm -Uvh glibc-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.i386.rpm
rpm -Uvh glibc-devel-2.3.4-2.41.x86_64.rpm
rpm -Uvh glibc-common-2.3.4-2.41.x86_64.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-44.2.x86_64.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.i386.rpm
rpm -Uvh libstdc++-devel-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.i386.rpm
rpm -Uvh libgcc-3.4.6-10.0.1.x86_64.rpm
rpm -Uvh make-3.80-7.EL4.x86_64.rpm
rpm -Uvh pdksh-5.2.14-30.6.x86_64.rpm
rpm -Uvh setarch-1.6-1.x86_64.rpm
rpm -Uvh sysstat-5.0.5-19.el4.x86_64.rpm
rpm -Uvh xscreensaver-4.18-5.rhel4.14.0.1.x86_64.rpm
rpm -Uvh openmotif21-2.1.30-11.0.1.RHEL4.6.i386.rpm
rpm -Uvh libaio-0.3.105-2.x86_64.rpm
rpm -Uvh libaio-0.3.105-2.i386.rpm
rpm -Uvh libaio-devel-0.3.105-2.x86_64.rpm
Note: some of them were already applied.
4) Changed /etc/sysctl.conf
kernel.shmmax=3221225472
net.ipv4.ip_local_port_range = 2024 65000
kernel.semmsl=256
kernel.semmns=32000
kernel.semopm=100
kernel.semmni=142
kernel.shmall=2097152
kernel.shmmni=4096
kernel.msgmax=8192
kernel.msgmnb=65535
kernel.msgmni=2878
fs.file-max=65536
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144
Note: rebooted the server couple of times
5) /etc/hosts entry
[root@arun2 vmware]# more /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.2.5 arun2.devar.com arun2
6) openmotif:
[root@arun2 vmware]# rpm -qa| grep openm
openmotif-2.2.3-10.2.el4
openmotif-devel-2.2.3-10.2.el4
openmpi-libs-1.2.5-5.el4
openmotif-2.2.3-10.2.el4
openmotif21-2.1.30-11.0.1.RHEL4.6
7) added couple of params to /etc/resolv.conf
options attempts:5
options timeout:15
8) Another hostname file
[root@arun2 rapidwiz]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=arun2.devar.com
9) there is no file called /etc/sysconfig/networking/profiles/default/network
[root@arun2 rapidwiz]# ls -l /etc/sysconfig/networking/profiles/default/network
ls: /etc/sysconfig/networking/profiles/default/network: No such file or directory
10) soft and all in /etc/security/limits.conf
# Added for Oracle
hard nofile 65535
soft nofile 4096
hard nproc 16384
soft nproc 2047
11) It fails at 33% of steps 2
12) I find most binaries are crashing. ldd command on binary doesn't show anything is missing.
13) file on libraries looks like this
[oracle6@arun2 ~]$ file /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
/d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
It become challenging and frustrating for me. I am really exhausted. Any help would be greately appreciated.
Regards
-Arun
PS: snip of log file:
(a)
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for MARS6 instance
ADX Database Utility
(b) tail -30
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/ApplyDatabase_02021441.log
Executable : /d01/oracle6/MARS6/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS6/db/tech_st/10.2.0/appsutil/log/MARS6_arun2/adcrdb_MARS6.txt
Creating the control file for MARS6_arun2 database ...
exit_code=139
Checking for errors ...
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1537
sDbSid : MARS6
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1537:MARS6
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1537))(CONNECT_DATA=(SERVICE_NAME=MARS6.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabaseThanks, appreciate your reply. As I mentioned earlier, binaries are crashing. (side note: I am on 10th attempt, so SID=MARS10)
1) There is a connection issue, not sure why.
2) I see, something cored. .... adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog......(full text below)
3) ldd on sqlplus in case required
[oracle6@arun2 bin]$ ldd sqlplus
libsqlplus.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libsqlplus.so (0x0000002a95557000)
libclntsh.so.10.1 => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libclntsh.so.10.1 (0x0000002a9574a000)
libnnz10.so => /d01/oracle6/MARS10/db/tech_st/10.2.0/lib/libnnz10.so (0x0000002a96ae6000)
libdl.so.2 => /lib64/libdl.so.2 (0x00000039f7200000)
libm.so.6 => /lib64/tls/libm.so.6 (0x00000039f7000000)
libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x00000039f7a00000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x00000039feb00000)
libc.so.6 => /lib64/tls/libc.so.6 (0x00000039f6d00000)
/lib64/ld-linux-x86-64.so.2 (0x00000039f6b00000)
4) last part of $ORACLE_HOME/appsutil/log/MARS10_arun2/ApplyDatabase_02061554.log
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : arun2
sDbDomain : devar.com
sDbPort : 1541
sDbSid : MARS10
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@arun2.devar.com:1541:MARS10
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=arun2.devar.com)(PORT=1541))(CONNECT_DATA=(SERVICE_NAME=MARS10.devar.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Fri Feb 6 15:54:57 EST 2009
The environment settings are as follows ...
ORACLE_HOME : /d01/oracle6/MARS10/db/tech_st/10.2.0
ORACLE_SID : MARS10
TWO_TASK :
PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/perl/bin:/d01/oracle6/MARS10/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/softwares/appsr12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
LD_LIBRARY_PATH : /d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/lib:/usr/dt/lib:/d01/oracle6/MARS10/db/tech_st/10.2.0/ctx/lib
Executable : /d01/oracle6/MARS10/db/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt
Creating the control file for MARS10_arun2 database ...
exit_code=139
Checking for errors ...
.end std out.
/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdb.sh: line 107: 30881 Segmentation fault sqlplus /nolog @/d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/install/MARS10_arun2/adcrdbclone.sql "so" "$S_RDBMS_VERS"
egrep: /d01/oracle6/MARS10/db/tech_st/10.2.0/appsutil/log/MARS10_arun2/adcrdb_MARS10.txt: No such file or directory
.end err out.
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein -
A fatal error occurred preventing product use, LaserJet Pro 200 color MFP M276nw
When trying to install the full printer software suite, as soon as I click the button to install after the .exe is extracted, I get an alert window with, "A fatal error occurred preventing product use." No error code, just an option to close the dialog. I have read all the related support topics and similar threads and tried all the solutions to no avail. Pasted below is the detailed error log. Any help at all would be much appreciated, Happy New Year!
Version=1
EventType=CLR20r3
EventTime=130330861946634368
ReportType=2
Consent=1
UploadTime=130330861947102369
ReportIdentifier=b741489f-732d-11e3-ad06-78e7d1894a6a
WOW64=1
Response.BucketId=3240107344
Response.BucketTable=5
Response.type=4
Sig[0].Name=Problem Signature 01
Sig[0].Value=hpbcsiinstaller.exe
Sig[1].Name=Problem Signature 02
Sig[1].Value=5.0.3.8039
Sig[2].Name=Problem Signature 03
Sig[2].Value=4fe20fe8
Sig[3].Name=Problem Signature 04
Sig[3].Value=hpbcsiInstaller
Sig[4].Name=Problem Signature 05
Sig[4].Value=5.0.3.8039
Sig[5].Name=Problem Signature 06
Sig[5].Value=4fe20fe8
Sig[6].Name=Problem Signature 07
Sig[6].Value=e
Sig[7].Name=Problem Signature 08
Sig[7].Value=1e
Sig[8].Name=Problem Signature 09
Sig[8].Value=System.TypeInitialization
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.768.3
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
UI[3]=HP Installer has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
LoadedModule[3]=C:\Windows\syswow64\KERNEL32.dll
LoadedModule[4]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[5]=C:\Windows\system32\apphelp.dll
LoadedModule[6]=C:\Windows\AppPatch\AcLayers.DLL
LoadedModule[7]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[8]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[9]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\USER32.dll
LoadedModule[13]=C:\Windows\syswow64\GDI32.dll
LoadedModule[14]=C:\Windows\syswow64\LPK.dll
LoadedModule[15]=C:\Windows\syswow64\USP10.dll
LoadedModule[16]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[17]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[18]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[19]=C:\Windows\syswow64\ole32.dll
LoadedModule[20]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[21]=C:\Windows\system32\USERENV.dll
LoadedModule[22]=C:\Windows\system32\profapi.dll
LoadedModule[23]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[24]=C:\Windows\system32\MPR.dll
LoadedModule[25]=C:\Windows\system32\IMM32.DLL
LoadedModule[26]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[27]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll
LoadedModule[28]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll
LoadedModule[29]=C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCR80.dll
LoadedModule[30]=C:\Windows\assembly\NativeImages_v2.0.50727_32\mscorlib\9a6c1b7af18b4d5a91dc7f8d6617522f\mscorlib.ni.dll
LoadedModule[31]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorsec.dll
LoadedModule[32]=C:\Windows\syswow64\WINTRUST.dll
LoadedModule[33]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[34]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\COMCTL32.dll
LoadedModule[36]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[37]=C:\Windows\system32\rsaenh.dll
LoadedModule[38]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[39]=C:\Windows\system32\ncrypt.dll
LoadedModule[40]=C:\Windows\system32\bcrypt.dll
LoadedModule[41]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[42]=C:\Windows\system32\GPAPI.dll
LoadedModule[43]=C:\Windows\system32\cryptnet.dll
LoadedModule[44]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[45]=C:\Windows\system32\SensApi.dll
LoadedModule[46]=C:\Windows\system32\uxtheme.dll
LoadedModule[47]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll
LoadedModule[48]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[49]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiCommonTools.dll
LoadedModule[50]=C:\HP_LaserJet_200_color_MFP_M276\Installer\NLog.dll
LoadedModule[51]=C:\Windows\system32\VERSION.dll
LoadedModule[52]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System\5d22a30e587e2cac106b81fb351e7c08\System.ni.dll
LoadedModule[53]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Configuration\29f3ae8d313e62b4daed1107ccd29f9f\System.Configuration.ni.dll
LoadedModule[54]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Xml\a9852a75edb6ed7cd5271b05519f5b56\System.Xml.ni.dll
LoadedModule[55]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Drawing\5aa44bce7933e4de09d935848f868a4b\System.Drawing.ni.dll
LoadedModule[56]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\ef0a534be135cd8f0d99d938d8b1814a\System.Windows.Forms.ni.dll
LoadedModule[57]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Data\764054efc88f51b54c8d7e44df26b671\System.Data.ni.dll
LoadedModule[58]=C:\Windows\assembly\GAC_32\System.Data\2.0.0.0__b77a5c561934e089\System.Data.dll
LoadedModule[59]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[60]=C:\Windows\syswow64\NSI.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=CLR20r3
AppName=HP Installer
AppPath=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
ReportDescription=Stopped workingDid you try to uninstall every .NET and then try again? Follow this guide:
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-... -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
Adcfgclone failing with RC-00110: Fatal: Error occurred while relinking of
Log file located at /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/ApplyDBTier_12240910.log
- 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
ERROR while running Apply...
Mon Dec 24 09:13:43 2012
ERROR: Failed to execute /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/bin/adclone.pl
Please check logfile.
Logfile:
Started ApplyDBTier at Mon Dec 24 09:10:34 EST 2012
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Using admin directory: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/bin
#------Log File time stamp: 1224091034------------
# $Header: CloneContext.java 120.92.12010000.25 2011/08/12 21:29:46 jaedo ship $
# Running on - infsgvm09
# Source Host - null
# Domain Name - sg.oracle.com
# Context Location - /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_infsgvm09.xml
# Context Type - null
# Context Template - null
# Clone Stage Area - null
# Pairs File - null
# Destination Context - null
# Validation - true
# Platform Migration - false
# no prompt - true
Checking Database Port on null: Port Value = 1521
Database Port available: Port Value = 1521
Checking DB ONS Local Port on null: Port Value = 6300
DB ONS Local Port available: Port Value = 6300
Checking DB ONS Remote Port on null: Port Value = 6400
DB ONS Remote Port available: Port Value = 6400
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/ouicli8.pl
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/config9.c
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/adlnkoh8.sh
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
Executing script in InstantiateFile:
/u01/oracle/VIS/db/tech_st/11.1.0/perl/bin/perl -I /u01/oracle/VIS/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u01/oracle/VIS/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/perl /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohMon Dec 24 09:10:35 2012
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/java:/u01/oracle/VIS/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_infsgvm09.xml -nolink -oaVar s_db_oh -homestub db -log /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/oracle/VIS/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/oracle/VIS/db/tech_st/11.1.0/oraInst.loc ORACLE_HOME=/u01/oracle/VIS/db/tech_st/11.1.0 ORACLE_BASE=/u01/oracle/VIS/db/tech_st/11.1.0 ORACLE_HOME_NAME=VIS_DB__u01_oracle_VIS_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Mon Dec 24 09:12:04 2012
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Mon Dec 24 09:12:04 EST 2012
Log file located at /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_infsgvm09/make_12240912.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
adlnkoh.sh completed sucessfully
.end std out.
chmod: changing permissions of `genclntsh': Operation not permitted
.end err out.
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/ouicli9.pl
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/config10.c
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.c
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
instantiate file:
source : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/adlnkoh9.sh
setting permissions: 700
AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
setting ownership: r12ora:r12ora
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /u01/oracle/VIS/db/tech_st/11.1.0/appsutil/clone
adlnkoh.sh INSTE8_APPLY
ouicli.pl INSTE8_APPLY
Directory: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib
config.c INSTE8
AutoConfig is exiting with status 3
RC-50013: Fatal: Instantiate driver did not complete successfully.
/u01/oracle/VIS/db/tech_st/11.1.0/appsutil/driver/regclone.drv
For help,thanks!!!!!
I'm right now working for clone a EBS 12.1.3 env.AC-00425: Setting permissions failed for file: /u01/oracle/VIS/db/tech_st/11.1.0/rdbms/lib/config.cAs root user, please change permissions on this file and make sure it is owned by the correct OS user (usually the database tier nodes are owned by oracle user).
The same error is reported in (How To Configure Apache In R12 (10.1.3) To Listen on a Restricted Port Such as 80 or 443 [ID 578001.1]) but the issue in the doc does not match the case you have. The doc clearly explains that setting permissions properly would fix the issue.
Thanks,
Hussein -
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Hi Experts,
I am performing Cloning for Oracle Application R12 with rapid clone and adcfgclone dbTier is failing with the below error.
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Both my source and target system are on the same server. I am using dbTier option because I have cold backup available from the source system.
DB Version: 11.2.0.3
EBS version: 12.1.3
OS Version: RHEL6, 64 bit
cat /data/db_top/db/tech_st/11.2.0/appsutil/log/TEST_oracleupk/ApplyDBTier_07050816.log
Log file contents:-
AutoConfig could not successfully execute the following scripts:
Directory: /data/db_top/db/tech_st/11.2.0/perl/bin/perl -I /data/db_top/db/tech_st/11.2.0/perl/lib/5.8.3 -I /data/db_top/db/tech_st/11.2.0/perl/lib/site_perl/5.8.3 -I /data/db_top/db/tech_st/11.2.0/appsutil/perl /data/db_top/db/tech_st/11.2.0/appsutil/clone
ouicli.pl INSTE8_APPLY 255
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
/data/db_top/db/tech_st/11.2.0/appsutil/driver/regclone.drv
cat $[target_oracle_home]/ appsutil/ log/$CONTEXT_NAME/make_[timeStamp].log
Error found while relinking
return code = .58
I have already checked these MOS Notes
OUICLI.PL Fails While Running Adcfgclone On Oracle EBS R12 If Global Inventory Does Not Exist [ID 458653.1]
RC-00110 Error While Running adlnkoh.sh [ID 330469.1]
But none has worked in my case. Please let me know what I'm missing here.
Thanks,
AnkurHi Hussein,
Following the workaround provided in this MOS Note ID has solved my issue.
Rapid Clone On Dbtier Fails "RC-50013: Fatal: Instantiate Driver Did Not Complete Successfully" [ID 1352116.1]
But now "adcfgclone.pl appsTier" is failing with the below error.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkWfClone.sh INSTALL_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile=/data/appl_top/inst/apps/TEST_oracleupk/admin/install
afwebprf.sql INSTE8_PRF 1
amscmprf.sql INSTE8_PRF 1
amswebprf.sql INSTE8_PRF 1
bisadmprf.sql INSTE8_PRF 1
bisdblrp.sql INSTE8_PRF 1
clnadmprf.sql INSTE8_PRF 1
cncmprf.sql INSTE8_PRF 1
cseadmprf.sql INSTE8_PRF 1
csfadmprf.sql INSTE8_PRF 1
csiadmprf.sql
INSTE8_PRF
1
eamadmprf.sql
INSTE8_PRF
1
fteadmprf.sql
INSTE8_PRF
1
icxwebprf.sql
INSTE8_PRF
1
oksfrmprf.sql
INSTE8_PRF
1
wshadmprf.sql
INSTE8_PRF
1
Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmprf.sh
INSTE8_PRF
1
admk80ln.sh
INSTALL_PRF
1
afadmprf.sh
INSTE8_PRF
1
afcpctx.sh
INSTE8_PRF
1
afcpgsm.sh
INSTE8_PRF
1
ibywebprf.sh
INSTE8_PRF
1
igccmprf.sh
INSTE8_PRF
1
jtfictx.sh
INSTE8_PRF
1
okladmprf.sh
INSTE8_PRF
1
txkJavaMailerCfg.sh
INSTE8_PRF
1
txkWebServicescfg.sh
INSTE8_PRF
1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmat.pl
INSTE8_APPLY
1
AutoConfig is exiting with status 31
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyApplTop
ERROR: AutoConfig completed with errors. Check logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_07080320.log for details.
ApplyApplTop Completed Successfully.
# Checking the status of AutoConfig run of ApplyApplTop
Warning : AutoConfig has completed with errors .
Thanks,
Ankur -
RC-50004: Fatal: Error occurred in ApplyDatabase (on installing EBS R12)
Hi,
I need help. When I was re-installing R12 using Windows XP Pro on my personal desktop, I got the following errors:
RC-50004: Fatal: Error occurred in ApplyDatabase
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
Running Database Install Driver for VIS instance
instantiate file:
source : C:\StageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
instantiate file:
source : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
dest : C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bingdell.xml
Please let me know what to do. BTW, I am not a DBA.
Also I was able to install R12 before to the same desktop, now I am having problems
re-installing it. I have also cleaned all the traces of the previous install before this re-install.
Thanks in advance,
AmorsoloHi,
RC-50004: Fatal: Error occurred in ApplyDatabase
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.This is a generic error, so please check the installation log file for details.
Also I was able to install R12 before to the same desktop, now I am having problems
re-installing it. I have also cleaned all the traces of the previous install before this re-install.Did you follow the steps in (Note: 567507.1 -How to Remove an Oracle E-Business Suite Release 12.x Windows Environment) to clean your previous installation?
Regards,
Hussein -
Fatal error installation code 1603 for all-in-one printer C4280
Until a month ago, I'd been successfully running my C4280 with my Dell 1535 (Windows 7 32-bit) for about a year. (It's not a new printer but it works perfectly well; it was a hand-me-down after my own HP printer died after many, many years of good service.) I uninstalled the software because the Solution Center stopped working, cleaned up my registry, deleted temp files, ran Uninstall L_3, installed Windows updates, installed Malwarebytes, checked the condition of my .NET Framework, etc., etc. I have literally spent about a month trying to get the printer software to install to no avail. I have been in every forum on the internet, tried every solution posted here or on the Micsrosoft website. I have read about the incompatibiltiy between HP and Win 7 and cannot find a solution. I don't know what else to do.
The only thing I have not done--and will not do--is to reinstall Windows, the last solution suggested by all the HP reps when all other solutions fail. What does it say about a tech-based company who's solution is to throw the baby out with the bathwater?
Pretty pathetic that one would have to chuck out a perfectly good printer because the software will not install. If anyone has any viable suggestions--other than rolling back the system to an earlier version or re-installing Windows--I'd LOVE, LOVE, LOVE to hear it. If I'm forced to buy a new printer because I could not install the driver, I vow never to buy another HP product as long as I walk the earth.
Here's the log info:
The following lines were retrieved from the installation error logs.
+00000000000001970176/s/Now Launching=X:\hpzprl01.exe -inf -m
preload_drivers-IXXX -f "X:\hpoins13.dat" -Validate No at" -Validate
No
Failed to add catalog file for
'X:\hposcu11.inf_x86_neutral_8470ae2dd4974995\hposcu11.inf'.
SetupINFsListedInDatFile failed with Fatal error during installation.
Exit code=1603
error situation code 25389268
Thanks in advance.BunnyVonBunny wrote:
Here's the log code:
Error code 31100272
+00000000000732983296/s/Now Launching=X:\hpzprl01.exe -inf -m
preload_drivers-IXXX -f "X:\hpoins13.dat" -Validate No at" -Validate
No
Exit code=1603
Hi BunnyVonBunny,
I appreciate your efforts thus far and I understand how frustrating this has been. Please complete the steps in the following document; Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin....
Some of these steps maybe the same as what I have already suggested but doing them in the order the document suggests could be what it takes to resolve the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
Sysprep - Fatal error occurred while trying to sysprep the machine
On the 4th attempt to sysprep a Windows 7 Enterprise system, I get the dreaded, 'A fatal error occurred while trying to sysprep the machine.'
The setuperr.log shows:
2010-08-04 13:57:58, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2010-08-04 13:57:58, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
I've seen articles referring to the Windows Software Licensing Rearm program may have issues running more than three times in a single Windows image and to add <SkipRearm>1</SkipRearm> in the /unattend file... but this did not help.
The Windows Media Player Network Sharing Service has also been disabled which is often referred to in other posts.
The KB article: http://support.microsoft.com/kb/947212/en-us indicated that the resolution is to re-create the image for the machine... This is very frustrating. I'm hoping that there is
a better resolution???
How do you sysprep a machine more than three times to avoid this error?
Thanks!!
930193I had a problem Where Runing slmgr /dlv returned 0 and could not sysprep a
32 bit Win 7 Installed on C:drive
Here is what I did to succeed whit Sysprep.
Disable UAC
Based on
This :
open notepad and copy paste the following:
@ECHO OFF
setLocal Enabledelayedexpansion
for %%d in (c d e f g h i j k l m n o p q r s t u v w x y z) do (
if exist %%d:\windows\system32 (
SET drv1=%%d:\windows\system32
reg load HKLM\MY_SYSTEM !drv1!
reg delete HKLM\MY_SYSTEM\WPA /f
reg unload HKLM\MY_SYSTEM
GOTO END
:END
ECHO Done, Rebooting system...
timeout 3
wpeutil reboot
Then in notepad chose file>save as, in File Type select "All Files", name it "c:\reset.bat"
Reboot Your Pc, after bios screen press F8, Select "Repair Your Computer", select your keyboard layout, enter your credentials if needed,
then select the last option "Open Command Prompt"
type "c:\reset.bat" or "d:\reset.bat" (Sometimes Your Windows Partition get a different letter on the repair environment)
Back on Windows follow step five if needed.
Check under slmgr /dlv you have more than 0 under "Remaining Windows Rearm count"
Download pstools.zip from
here, extract content an copy psexec.exe to %windir%\System32
run psexec.exe and accept the license agreement so it won't bother when running afterwards, close it.
open notepad and copy paste the following:
@ECHO OFF
echo Stopping Windows Media Player Sharing Service..
echo.
net stop wmpnetworksvc
echo.
echo Deleting Old Sysprep Logs...
echo.
del /f /s /q %windir%\System32\sysprep\panther\*.*
echo.
echo Adding Required Sysprep Registry Keys...
echo.
REG ADD "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v SkipRearm /t REG_DWORD /d 00000001 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v GeneralizationState /t REG_DWORD /d 00000007 /f
REG ADD HKLM\SYSTEM\Setup\Status\SysprepStatus /v CleanupState /t REG_DWORD /d 00000002 /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Cleanup /v "{EC9FE15D-99DD-4FB9-90D5-5B56E42A0F80}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize /v "{EC9FE15D-99DD-4FB9-90D5-CE53C91AB9A1}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
psexec -i -s REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize /v "{EC9FE15D-99DD-4FB9-90D5-676C338DC1DA}" /t REG_SZ /d "C:\\Windows\\System32\\iesysprep.dll,Sysprep_Cleanup_IE" /f
echo.
echo Uninstalling MSDTC...
echo.
msdtc -uninstall
timeout 10
echo.
echo Reinstalling MSDTC...
echo.
msdtc -install
timeout 10
echo.
echo Cross Your Fingers, Finally Running Sysprep...
echo.
%windir%\System32\sysprep\sysprep /generalize /oobe /shutdown /unattend:unattend.xml
Change Last Line to suit your needs, ie: if you are not using an unnattend answer file, then delete /unattend:unattend.xml"
Then in notepad chose file>save as, in File Type select "All Files", name it "%windir%\System32\do.cmd"
if you use an unattend.xml file copy it to %windir%\System32\sysprep folder.
Once you are ready run %windir%\System32\do.cmd
Hope it helps, -
Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network
We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
What size should external back-up drive be for use with Time Machine?
I am very new to Macs. My iMac has a 500GB hard disc - not much on it yet. I want to back the hard disc up daily and automatically to an external hard drive using Time Machine. So that I could restore everything if the iMac failed. 1. Does the extern
-
Armada 1580DMT BIOS Update needed
Hello from Bulgaria I'm a HP Compaq user from forever and I've always been happy with the laptop products. I currently own a Pavilion dv6-1080eq. I still keep the first laptop I got, it's an Armada 1580DMT. I want to bring this old fighter back to li
-
How to make exception rules for Stylish rules which change fonts?
How to make exception rules for Stylish rules which change fonts? I use [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish add-on] to change specific fonts to other fonts of my choice, but I have a problem. I want to change the font Ari
-
HI experts, I am actually abaper but also look into some MM issues. I am really sorry if i have posted in a wrong forum. Well i can view the PO print preview in ME22N but if print preview in ME23N it is giving a message 'No message found'. Recently t
-
Is it true that if you give in your old ipod you can get a new one for 1/2 off?
I heard that if you trade in your old ipod touch, you get a discount on buying a new one. Is that true?