Satellite A105-S4211 Will not keep correct Time

I have a Satellite A105-S4211 running Windows XP SP2. A few months back, it stopped keeping the correct system time. I suspected it was the CMOS battery. How do I replace the battery? Can it be replaced?

Try DFU mode and then restore to factory settings/new iPod. Not from backup
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you still then have the problem yo have a hardware problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

Satellite L775D-S7222 clock will not keep correct time

When I turn on/leave my computer on my time will change anywhere from 5 minutes to about 5 days ahead. It happens everytime I use my computer. I change the time constantly and also have tried changing time zones and changing the websites in which the time can be synced from. Its a small problem but it is very aggravating! I've heard that this could be a hardware problem, but hopefully that is not the case!

Try DFU mode and then restore to factory settings/new iPod. Not from backup
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you still then have the problem yo have a hardware problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Satellite A105 Reboot, will not start up

Hi....
Laptop belongs to my wife and this morning I am told that it will not start up.
Problem is .... Begins to start and shows symptoms of previous post by tommy1980murf.
Quick flash of a blue screen with text, then moves onto options for Safe Start, Safe network start ...etc...
No matter which optoin is chosen the laptop goes through the process bringing up the Windows XP logo then abruptly shuts down almost like a reboot. Process automatically starts over again and again.
Options on immediate power up are F2 and F12.
Does anyone have any advice to offer?
Thanks in advance for your help ...Andy

WIll it boot into Safe Mode? If so right click on the My Computer Icon and select Properties. Click on the Advanced Tab, then the Setting sbutton by Startup and Recovery. Now make sure that the Automatically Restart checkbox is NOT checked then OK your way out. Now when the blue screen appears the system will stop giving you a chance to read it and tell us EXACTLY what it says. Not something like, EXACTLY WORD FOR WORD. The lines you will be needing to post will be the ones in this picture http://www.pcstats.com/articleimages/200409/BSOD_2.gif that state:
STOP: and a string of NUMBERS (they are zeros not letter O's)
and the
Driver_IRQL_NOT_LESS_OR_EQUAL line.
Also look to see if they list any specific driver, file, or program.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Desktop screen on my Satellite C660-174 will not open correctly

I'm a newbie here so my question may be obvious to some,,,,but not to me!
My Satellite C660-174 laptop (running Windows 7) has stopped opening correctly. Everything is normal up to the point that my password is typed in. Instead of opening up to my 'desktop' with its icons all down the side I get a page with a 'Toshiba Leading Innovation' banner across it and just four random icons down the side.
How can I restore my desktop screen and all the icons?
Help will be appreciated.

It is really not easy to understand what do you see exactly.
Can you please make a pic and send some link where we can see it?
I really don't understand what could be the problem but what you can try is to start your machine with F8 and enter advanced boot options. Choose the entry "Repair your Computer" and press "Enter". Go forward until you will enter System recovery options. Try to make system restore to earlier time. Maybe this will help you to fix described issue.
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

Nano 6th gen. will not keep accurate time.

Every time I turn it on the time is wrong and the second hand is stuck.

The audio system in some cars is apparently not compatible with the touch devices. I am not sure why. My Honda won't accept my 1G iPod Touch, but does accept the new nano (fortunately, because as tiny as it is, that's all it is useful for to me).

Prime Optical Server not keeping correct time.

OK this is an issue that I have been having since we loaded Optical Prime 9.3.1. I thought it might have been solved in OP 9.6, it hasn't. We are running both on two separate Red Hat 5.8 servers that are spot on to the NTP server we have. The NTP is tied to a GPS Strat 1 source. We have tried every setting we can think of. It's not a small drift either. Current time on both RH servers is 1956 UTC. the 9.3.1 OP says 0207 UTC tomorrow, and the 9.6 OP server shows 0443 UTC tomorrow. It is frustrating to my Techs and me. I have told them to use the NE alarm time on the screen for tracking tickets.
I need help. it is causing problems with data collection and analysis. things I can do in CPO I have to collect from 117 different NE's.
Thanks for any suggestions,
Steve

try tp cheack nymber of ntp procceses and leave only one like in example:
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp" | wc -l
2
[root@CPOn ~]# ps -ef | grep -v grep | grep "ntp"
ntp 2040 1 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
root 2051 2040 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
Stop CPO - opticalctl stop
[root@CPO ~]# kill -9 2051
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp"
ntp 2040 1 0 Jan23 ? 00:00:01 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
[root@CPO ~]# ps -ef | grep -v grep | grep "ntp" | wc -l
1
Cheack command "prefer" after IP of NTP server in /etc/ntp.config file.
Start CPO - opticalctl start

Ever since the update to the IOS7 my ipod will not keep the time. I have reset everything you could reset I have even reset it back to factory settings. I have tried setting the time and date to automatic and manual multiple times but nothing is working.

Please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Firefox will not keep the "no proxy" setting. I have to select every time I load Firefox. How can I get it to keep the setting?

I have to select the 'no proxy' setting every time I load Firefox. It will not keep the setting. I cannot find a way to get it to retain that information.

Hi,
Please [http://kb.mozillazine.org/Preferences_not_saved see this.] To open your profile folder: '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Open Containing Folder'''.
You can also try to start Firefox in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] and in the first screen choose '''Reset all user preferences to Firefox defaults:''' and '''Make Changes and Restart'''. This is the same as deleting prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox profile folder], which erases all the manually set options as well as those set by extensions.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

My clock in the menu bar will not keep time.

My clock in the menu bar will not keep time.
However, if I click on it and open Date & Time and do nothing more, it adjusts to the current time but still doesn't work as the seconds aren't advancing. I close Date & Time but the clock stays highlighted/selectted, which is also strange.
Any suggestions as to how to get my clock running again?

Hi Peter,
Not certain, but I'd try this...
You've probably got a couple of corrupt preference files.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
reboot

Satellite A105-S4211 can be launched at safe mode only

Hello,
I am a newer, and need help!
I have Toshiba Satellite A105-S4211 laptop. My kid used it for a year, and told me the Window XP operating system could not be normally launched up. I tested it. This laptop only can be started at safe mode. I used following method try to fix it. but it still works at safe mode only:
1. Replaced memory.
2. Replaced hard drive.
3. format hard drive, and reinstall Toshiba recovery disk--> could not install completed, fail at latest step.
4. format hard drive, and install Window XP professional SP2 --> fail at latest step also.
5. lauched at safe mode, and use command chkdsk to check disk. finsihed checked disk and ask me to use command "chkdsk /f" at next start up because some file is used. I reply "Yes", and restart laptop, it still going to safe mode.
6. One of my friend told me this maybe the video card of this laptop is out of work because it only works at low resolution. I have no idea.
7. I read some error messages at the process of launch. such as error at address 0x00000005. but I don't know how to fix it.
Some one told I should replace a new mother board. I bought this laptop at the fall of 2006, but my kid used only one year. it has not been used because this trouble. Is it the reasonable idea to buy new motherboard?
thanks!
Mike

Thanks for any response advance!
I tested this lapton again as following:
1. Boot from orininal recovery disc, erase and partition hard drive
2. continue to boot from recovery disc, select option of recovery of factory default software
3 finish the process to create CRC, and screen show the recovery completed
4. Screen shows " Apply final configuration (Don't interrupt)
5, Window Xp show to shut down, and restart laptop, the normal desktop screen is shown
6. pop up window indicates "load personal setting"
laptop repeatly step 4 to 6 two to three times, then I had couple different results:
a. laptop still power on, screen does not show any image, black, but it is different to the "black" without power.
b. a small window indicates: This system is not fully install, please run setup again"
If I manually shut down this laptop, and make cold power up:
a. stay at Window XP initial image, can not go to next
b. laptop show blue screen for one second (looks to make disk check), go to option to select safe mode or normal mode
c. go to Window guiding setup, I finished the Windows XP set up step by step, laptop freeze
The trouble begins at the step of "Apply final configuration".
Do I need to order the disc of Recovery and Application/Drivers, Satellite A100/A105 Series"?
Any suggestion? thanks!
Mike

Creative Zen 8GB not keeping accurate time on cl

Hello, I am wondering if anyone else is experiencing problems with thier Creative Zen's (mine is an 8GB) not keeping accurate time on the digital clock on the player? My firmware is .2.0 by the way. I have a fully charged battery and noticed yesterday that the time on my clock was way off and needed to be set once more. So I set it correctly yesterday, now 24 hours later, the time is again way off...it thinks it's :6 pm even though it's 0:20 pm as I post this message.
I have noticed this several times previously and have adjusted the clock accordingly each time...this is not just a random incident.
I have used the player for several hours today but the battery still has lots of charge left and the unit functions correctly minus this time issue.
Any feedback or help would be appreciated.
Thanks,
Drew

I too hope that if others are having this problem that they would add their comments to this thread. I know this is a rather small issue, but it is annoying none the less. I mean otherwise my player is rock solid. Yes I could turn off the display of the clock and not rely on it at all (now I don't because it's always wrong) but that means I am settling for a product that does not work as advertised with ALL it's features working correctly. I am being kind of picky but I just want the product to function correctly... I don't think that's being too out of the ordinary with my expectations.
Anyhow, to make a long story short, I have been issued an RMA number and plan on sending the player off to Creative here in Canada.
I promised to post a follow-up with a copy of what Creative has sent me for correspondence in case others are interested. Oh and just to be complete, here are my answers to the suggested self-troubleshooting methods in the following email - yes I am running the latest firmware release and I am a clock setting professional now because I have done it so many times.
I have also searched this forum for other users who may be having this issue and I did not find too many (I found this interesting). So that is why I created this thread. I am starting to notice, at least at this time, a few others who are having similar experiences as I-yup I agree I am not the first to have problems with my MP3 player nor the last. Just was curious to see if this was a common problem or if I was the lucky one of the bunch or one that people just didn't bother to report...
Regardless everyone's feedback is appreciated and respected.
Anyhow here is their email:
Dear Drew,
Thank you for your contacting us at Creative Technical Support; we
appreciate the opportunity to assist you.
I understand that you are having some issues with your Zen player. The
device does not display the time correctly causing you to reset the time
frequently. I'm sorry for the inconvenience caused; allow me to offer
some possible solutions to this issue.
Prior to sending us an email, I believe you would have gone through some
basic troubleshooting steps for your player. If not, please refer to the
Knowledge Base article below:
How to Use and Troubleshoot Your Zen Player
http://us.creative.com/support/kb/ar...p?l=2&sid=4763
To begin, I would suggest you refer to the following Knowledge Base
article regarding setting the Time and Date on your Zen Player,
specifically the first part that deals with Zen players in general.
Changing Date, Time, Clock and Alarm On A ZEN Player
http://us.creative.com/support/kb/ar...p?l=2&sid=5638
Subsequently, you might wish to update your player's firmware to the
latest version. You may use the Recovery Tool to do so. Please follow
the link below:
http://www.creative.com/products/mp3...me.asp?region=
However, if the time on the player still does not display correctly, you
may need to schedule for a repair or replacement. Please note that your
product will be tested upon receipt and if no malfunction is found in
the product, it will be returned to you.
Please follow this link to have an RMA issued for your product:
http://us.creative.com/onlinerma
All applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.
Thank you once again for contacting us. I hope the above articles are
able to address your concerns. In the mean time, perhaps you might be
interested in the Creative Aurvana In-Ear Earphones for your Zen player.
These earphones have been designed to block out 90% of ambient sound,
thus providing more precise audio reproduction. It would be a great
complement for your player. For more information about this product, do
have a look at our website
http://us.creative.com/products/prod...&WT.mc_id=3862
If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service.
Best Regards,

Webpages will not load correctly on any browser

Hey all,
About 3 weeks ago I took the leap and upgraded my works PC from Windows 8 to 8.1 (as a test before doing the rest). Unfortunately since this time I've been continually encountering a major issue.
This issue is that webpages will not load correctly (about half the time). Since the day I upgraded I've had issues with this, across all browsers. Sometime a webpage will load, sometimes it'll partially load and sometimes it seems to have loaded but actually
hasn't (I.e. none of the links/inputs work). If I have an issue on a page, the only way I can get it to load is to click the stop button, navigate away from the page and then navigate back.
I've tries assessing the problem with Firebug and it seems that the HTTP transfer is being cut-off at a certain point (which is non-consistent). The webpage is then stuck in a state of 'Transferring data' and will never finish loading.
I've been looking around for answers and have come across some suggested solutions like running the All In One fix from tweaking.com, or flushing the DNS cache every few hours, but nothing is working.
Has anyone any suggestions for how I could fix (or even further troubleshoot) this problem?
Thanks
David

Please try a clean boot.
http://support.microsoft.com/kb/929135
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?

Why Is Keeping Correct TIME in Arch Such A PITA?

Why has this happened again. Why is keeping correct time in Arch such a constant struggle and general pain in the ass?
My latest Ubuntu install doesn't even use ntp or openntpd, and never looses track of time. It keeps correct time running in an
Arch Vbox along with most other virtual Linux distros.
Does this have to be this way. I could care less if my time is off by a min or so, but to be off 10min every 2-3 days is not good.
It seems the info in the wiki is ether obsolete or inaccurate and or overly complex.....with too many....some people do this....you may want to try that....
If I was a Linux GURU, I'd figure this problem out and correct/update the wiki......but since I'm not, and can't...
I have no choice but to beg for help, Please!!
This is the problem again!!!
[jeff@Arch2009p2 ~]$ ntpq -p
No association ID's returned
Last edited by jeff story (2009-12-02 22:45:58)

Thanks for the help and patience Rookie.
I guess I am kinda guilty in not wanting to put much into "just want to see close to the correct time on my desktop" problem!!!
I tend to prioritize the time I spend on my new Linux hobby by what I find interesting and or FUN.....
To be honest, this time issue has been neither, and is something I'd like to find a quick fix, and move on.
I haven't spent much/any time actually "studying" it....my bad!!
And no, I didn't just randomly guess 4 numbers between 0 and 255, put them together with decimal points, and hope for the best....
I used my random time server IP address generating algorithm ....just kiddn!!
I got them from my ntpq -p output (#8 post above) that was when ntp was working.
My ntp.log file:
8 Dec 00:00:47 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 00:06:10 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 00:08:17 ntpd[1668]: time reset +1.958317 s
8 Dec 00:13:01 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 00:23:40 ntpd[1668]: time reset +1.960090 s
8 Dec 00:27:59 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 00:33:21 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 00:38:42 ntpd[1668]: time reset +1.951408 s
8 Dec 00:45:30 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 00:48:24 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 00:54:22 ntpd[1668]: time reset +2.034356 s
8 Dec 01:00:26 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 01:08:57 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 01:10:28 ntpd[1668]: time reset +2.060369 s
8 Dec 01:16:26 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 01:20:45 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 01:26:26 ntpd[1668]: no servers reachable
8 Dec 01:31:32 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 01:31:34 ntpd[1668]: time reset +2.768349 s
8 Dec 01:38:23 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 01:47:01 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 01:47:03 ntpd[1668]: time reset +1.893794 s
8 Dec 01:58:09 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 01:58:14 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 01:58:48 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 02:02:31 ntpd[1668]: time reset +1.940767 s
8 Dec 02:08:04 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 02:12:17 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 02:18:14 ntpd[1668]: time reset +1.977182 s
8 Dec 02:22:57 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 02:28:14 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 02:34:06 ntpd[1668]: time reset +1.986197 s
8 Dec 02:39:11 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 02:42:50 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 02:50:01 ntpd[1668]: time reset +2.012326 s
8 Dec 02:54:36 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 02:57:59 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 03:05:31 ntpd[1668]: time reset +1.900115 s
8 Dec 03:15:00 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 03:16:03 ntpd[1668]: no servers reachable
8 Dec 03:16:03 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 03:21:27 ntpd[1668]: time reset +1.951422 s
8 Dec 03:27:49 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 03:36:30 ntpd[1668]: time reset +1.871193 s
8 Dec 03:42:13 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 03:51:38 ntpd[1668]: time reset +1.902758 s
8 Dec 04:00:30 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 04:01:18 ntpd[1668]: synchronized to 206.55.70.42, stratum 2
8 Dec 04:03:35 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 04:06:42 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 04:07:03 ntpd[1668]: time reset +1.878555 s
8 Dec 04:11:43 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 04:14:38 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 04:17:21 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 04:22:09 ntpd[1668]: time reset +1.820429 s
8 Dec 04:26:44 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 04:37:33 ntpd[1668]: time reset +1.884735 s
8 Dec 04:41:59 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 04:52:49 ntpd[1668]: time reset +1.904257 s
8 Dec 05:01:26 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:02:14 ntpd[1668]: no servers reachable
8 Dec 05:02:18 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:08:45 ntpd[1668]: time reset +1.934852 s
8 Dec 05:15:36 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:24:32 ntpd[1668]: time reset +1.989070 s
8 Dec 05:33:32 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 05:35:41 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:39:52 ntpd[1668]: time reset +1.848521 s
8 Dec 05:45:38 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:49:53 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 05:55:34 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 05:55:36 ntpd[1668]: time reset +1.964663 s
8 Dec 06:00:30 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 06:10:38 ntpd[1668]: time reset +1.842886 s
8 Dec 06:15:04 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 06:25:49 ntpd[1668]: time reset +1.844650 s
8 Dec 06:31:03 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 06:41:32 ntpd[1668]: time reset +1.951328 s
8 Dec 06:48:37 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 06:56:54 ntpd[1668]: time reset +1.887304 s
8 Dec 07:01:44 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 07:12:27 ntpd[1668]: time reset +1.920628 s
8 Dec 07:18:13 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 07:28:29 ntpd[1668]: time reset +1.980813 s
8 Dec 07:33:42 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 07:38:39 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 07:43:49 ntpd[1668]: time reset +1.881431 s
8 Dec 07:50:03 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 07:53:34 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 07:59:46 ntpd[1668]: time reset +1.965866 s
8 Dec 08:04:45 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 08:08:26 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 08:15:38 ntpd[1668]: time reset +1.909397 s
8 Dec 08:21:58 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 08:31:06 ntpd[1668]: time reset +1.875074 s
8 Dec 08:37:27 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 08:41:17 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 08:45:00 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 08:46:43 ntpd[1668]: time reset +1.901449 s
8 Dec 08:51:02 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 08:56:23 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 09:02:11 ntpd[1668]: time reset +1.913327 s
8 Dec 09:07:47 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 09:11:36 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 09:17:35 ntpd[1668]: time reset +1.879629 s
8 Dec 09:26:08 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 09:28:47 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 09:33:41 ntpd[1668]: time reset +1.955124 s
8 Dec 09:39:45 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 09:43:00 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 09:49:32 ntpd[1668]: time reset +1.956294 s
8 Dec 09:53:52 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 09:58:09 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 10:05:09 ntpd[1668]: time reset +1.870515 s
8 Dec 10:10:46 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 10:20:30 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 10:20:56 ntpd[1668]: time reset +1.943897 s
8 Dec 10:26:15 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 10:31:36 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 10:36:01 ntpd[1668]: time reset +1.847729 s
8 Dec 10:40:58 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 10:51:45 ntpd[1668]: time reset +1.889479 s
8 Dec 10:57:04 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 11:01:49 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 11:06:50 ntpd[1668]: time reset +1.839236 s
8 Dec 11:14:02 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 11:19:16 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 11:22:41 ntpd[1668]: time reset +1.968947 s
8 Dec 11:27:02 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 11:32:23 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 11:38:41 ntpd[1668]: time reset +1.903414 s
8 Dec 11:47:32 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 11:54:16 ntpd[1668]: time reset +1.915699 s
8 Dec 11:59:17 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 12:04:31 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 12:10:06 ntpd[1668]: time reset +1.846985 s
8 Dec 12:15:07 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 12:20:32 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 12:25:53 ntpd[1668]: time reset +1.985553 s
8 Dec 12:32:53 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 12:41:32 ntpd[1668]: time reset +1.929433 s
8 Dec 12:46:47 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 12:57:15 ntpd[1668]: time reset +1.946246 s
8 Dec 13:02:05 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 13:07:30 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 13:13:10 ntpd[1668]: time reset +1.927305 s
8 Dec 13:19:04 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 13:28:49 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 13:29:15 ntpd[1668]: time reset +1.972395 s
8 Dec 13:34:22 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 13:39:47 ntpd[1668]: synchronized to 128.105.39.11, stratum 2
8 Dec 13:44:19 ntpd[1668]: time reset +1.838454 s
8 Dec 13:48:51 ntpd[1668]: synchronized to 128.105.37.11, stratum 2
8 Dec 13:59:42 ntpd[1668]: time reset +1.850518 s
8 Dec 14:06:32 ntpd[1668]: ntpd exiting on signal 15
8 Dec 14:07:25 ntpd[1609]: signal_no_reset: signal 17 had flags 4000000
8 Dec 14:09:31 ntpd[1609]: ntpd exiting on signal 15
8 Dec 14:09:31 ntpd[1608]: ntpd exiting on signal 15
8 Dec 14:10:32 ntpd[1622]: signal_no_reset: signal 17 had flags 4000000
8 Dec 14:10:59 ntpd[1621]: ntpd exiting on signal 15
8 Dec 14:10:59 ntpd[1622]: ntpd exiting on signal 15
8 Dec 14:11:55 ntpd[1591]: signal_no_reset: signal 17 had flags 4000000
8 Dec 14:19:56 ntpd[1659]: signal_no_reset: signal 17 had flags 4000000
8 Dec 14:21:01 ntpd[1657]: Listening on interface #4 eth0, fe80::224:8cff:febc:ccee#123 Enabled
8 Dec 14:21:01 ntpd[1657]: Listening on interface #5 eth0, 192.168.2.2#123 Enabled
8 Dec 14:21:01 ntpd[1657]: new interface(s) found: waking up resolver
9 Dec 01:21:04 ntpd[1657]: ntpd exiting on signal 15
9 Dec 01:25:33 ntpd[1649]: signal_no_reset: signal 17 had flags 4000000
9 Dec 01:27:42 ntpd[1649]: ntpd exiting on signal 15
9 Dec 01:27:42 ntpd[1648]: ntpd exiting on signal 15
9 Dec 01:28:33 ntpd[1600]: signal_no_reset: signal 17 had flags 4000000
9 Dec 01:32:01 ntpd[1629]: signal_no_reset: signal 17 had flags 4000000
9 Dec 01:32:01 ntpd[1628]: bind() fd 20, family AF_INET6, port 123, scope 2, addr fe80::224:8cff:febc:ccee, mcast=0 flags=0x11 fails: Cannot assign requested address
9 Dec 01:32:01 ntpd[1628]: unable to create socket on eth0 (5) for fe80::224:8cff:febc:ccee#123
9 Dec 01:32:01 ntpd[1628]: failed to initialize interface for address fe80::224:8cff:febc:ccee
ntpq -p
Last edited by jeff story (2009-12-10 10:07:18)

Canon mg3200 will not align correctly prints is blurred

Canon mg3200 will not align correctly prints is blurred. I have used the canon print head alignment several times. It will print some of the picture correctly and the rest is out.

Hello,
Please try the procedures outlined in the link below:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
If the issue persists at that point, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Satellite A105-S4211 Will not keep correct Time

Similar Messages

Maybe you are looking for