Satellite A110-137: USB 1.1 to serial cable does not work
My computer is Satellite A110-137 and the OS is Windows XP home edition v 5.1 service pack 2. Language setting is Finland.
I have a Prolific USB 1.1 to RS232 Cable driver version 2.0.0.26.
It does not work at all. When I try to connect it to a Kantronics KAM packet radio modem using Hyper Terminal there is an error message COM3: ei voi avata. Tarkista porttiasetukset. (COM3: cannot open. Check port settings.)
The settings I have are 9600 bps, 8 databits, parity none, 1 stop bit, flow conrol hardware. This is the same both in the device driver settings and in the Hyper Terminal settings. It is 100% sure that the problem is somehow related to either Toshiba or Windows XP as the very same USB to RS232 converter works just perfectly and right at the very first time with e.g. Fujitsu ErgoPro having Windows 2000 (and that is a Pentioum 233 machine, so very old stuff indeed).
I can't get any help from Prolific, their home pages seem to be off-line now.
Hi
I have investigated a little bit in the net and it seems that this USB 1.1 to RS232 converter creates a virtual serial port (possibly the com 3)
As far as I know the built in modem uses the same port.
Possibly there could be compatibility problems.
However, this is not a Toshiba product and therefore I would recommend contacting the Prolific support.
I was on the website and its online.
Similar Messages
-
I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I purchase adobe acrobat x I put it on two computers in my office I need to put it on one more but the serial number does not work anymore is there a way to put it one the third computer?
Also, you can only use it on two computers if they belong to the same person, are used only by that one person, and are not used at the same time. To install on two computers for two people needs two licenses. Adobe sell volume licenses, but do not sell an "all the computers in the office" license.
-
Last night I bought Adobe XI Pro and this morning the serial number does not work.
Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]
You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
Serial number does not work on second computer
I've added a second in-design to my second laptop but the serial number does not work. What do I do?
Please confirm if the Indesign that you have is a perpetual license or a part of CC.
If it is a part of CC then serial number is not required. Then you can follow http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
If it is a perpetual license then let us know the exact error that you are recurring.
Regards
Rajshree -
My serial number does not work with Photoshop Elements 12
I have wasted at least 3 hours of my time with this issue
Be kind enough to respond and if you do not want tell me to move to an alternative product and refund me
For the teeth time I bought and paid for a photoshop elements 12 windows for my Mac and obviously in retrospect I made an error downloaded but the serial member does not work
Please supply a correct serial number
Please respond
Louwrens
<Removed by Moderator>You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
Aperture serial number does not work
I just got a Mac Book Air, my Aperture Serial number does not work. it tells me it is not correct. How can I use my software now?
First how did you purchase Aperture and how did you install it on the Air? As the Air does not have a DVD drive it would help to know how you got the app onto it.
Start with Troubleshooting Professional Application Serial Numbers and see if that helps.
There is also Pro Application Replacement Serial Numbers if you're not able to get your serial number working. -
Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?
photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?
Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked. -
i purchased CS2 online from amazon ... the serial number did not work... I then went to live chat and they guided me to a new number..
it does not work either... what can i do?????Is it possible you had a previous install or demo on your disk?
In that case, try deleting these files:
/Library/Receipts/Shake4.1.pkg
/Library/Application Support/ProApps/Shake System ID
Then repair disk permissions using this:
/Applications/Utilities/Disk Utility
and try again. -
Adobe Builder 4.7 Serial Number does not work
Hi,
I followed the instructions to download and install the Adobe Builder 4.7 Beta @ http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7.
The Serial Number mentioned for the product (1424-4002-6183-5974-1150-0356) does not work : keep seeing the "The serial Number you entered is invalid" error message.
Is there an updated serial number, or is the Beta program no longer working?Flash Builder 4.7 got released !!!
Please visit - http://www.adobe.com/products/flash-builder-family.html for further details. -
My serial number does not work. Why?
Hello,
I bought my photoshop elements 11 a few days ago through amazon. My pc does not have an enter to a dvd (what is normal in nowadays), so I decided to download the software through adobe website and use the serial number that comes with my new photoshop elements, but it doesn't work. What can I do now? I can´t return my product and I bought a serial number. Can I use the serial number with a photoshop elements 11 that I downloaded?
Regards,
CatarinaIf you downloaded the product since 24th September it will have been v12 - and your v11 serial number will not work with it.
It is possible that as you purchased within the last thirty days you may be eligible for a free upgrade to v12. Either way contact Adobe support and see what they say - if not eligible they may point you to a v11 download.
Alternatively download v11 from ProDesign - follow the instructions carefully: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Cheers,
Neale
Insanity is hereditary, you get it from your children -
I have CS5 photoshop extended on my mac home computer. I had it also on my mac laptop. I deactivated it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?
David o"bryan did you migrate/transfer any files/folders/applications to the new Mac laptop? You can verify that your serial number is valid by checking under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
Serial Number does not work after hard drive was replaced
My hard drive was replaced and now FCP 7 does not work even when I type in the correct serial number. Help please. Thanks
You posted your question in the Final Cut Pro X forum.
You should repost it in the Final Cut Studio forum. -
Satellite A660-11M on Windows 7 - Toshiba Power Saver does not work
I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!Toshiba Power Saver is only for XP installations, you can't install the XP Drivers (and most Vista Drivers) in Windows 7.
Make sure all your drivers are for the A660, and make sure they are for Windows 7.
Maybe you are looking for
-
How to Configure iCloud with multiple iCloud accounts and one apple id
I need some help from the icloud experts. I almost have my arms around this, but not completely. What I want to end up with is the following: One account that both my wife and I use for shared contacts, calendars, photostream and find my device. Sepa
-
Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help
-
Flash won't install properly and I need your help!
Details: -Computer: Mac OS X 10.5.8 (Intel Core 2 Duo) -Browser: Safari 5.0.5 (5533.21.1) -Flash version: Flash 10.3 -Problem: Installation seems successful, but websites still cannot play Flash content and request (again) I download the latest versi
-
Business Connector problem with SSL and Web Services
Hi, I have generated a Web Connector Service and tested this in our DEV and QA environment with http and no credentials. All is fine. I now switched to SSL and was provided with an https WSDL by our Web Server developers. The Web Connector service ge
-
I'm new to Keynote, so please be nice with me I want to create a sitemap (like this one: http://www.apple.com/sitemap/) into my website created with Iweb 09. I would love to make it a little interactive like a Keynote presentation, something simple n