Satellite A110-178 - Burn audio CD including CD-text

Hi,
I have a Toshiba Satellite A110-178. I would like to create an audio CD (.wav files) including cd-text (so, data like artist, album, etc.)
I tried to add the cd-text using several different software programs (Nero, Acoustica CD burner, etc.), however when I burn the CD, the cd-text is not available.
Now I found out that your cd-burner also needs to be capable to burn the cd-text. Apparantly, not all cd-burners have this capability.
Do you know whether the cd-burner in my Toshiba is capable of burning this data?
Thanks & regards,
Oliver

Hi,
Thanks for the help.
I found a useful tool from Nero which checks whether your cd/dvd burner supports cd-text etc.
[http://www.nero.com/eng/support-nero8-tools-utilities.html|http://www.nero.com/eng/support-nero8-tools-utilities.html]
I'll check it later, I'm not home now so not able to check.
Keep you posted..!

Similar Messages

Satellite A110-178 - Battery discharges very fast

Hi
I've a satellite a110-178 (psab0). The machine works fine, only the battery works for just 5 minutes and than it's going beeping and it shuts itself down.
Any way to get this battery working fine again?

Hi Maurice
For me it looks like your battery is dead.
May I ask you how old it is?
The point is that after a long time of usage every battery start to lose the own performance and someday it will die.
This is nothing unusual.
My battery is about 6 years old and since 3 years I can use it only for about 2min :D
I know, I should replace it but my notebook is connected always to the AC, so I dont need a new battery.
Anyway, you battery need to be replaced if you want to run the notebook longer using the battery.
bye

Not supprted resolution 1440x900 for 19" screen on Satellite A110-178

Hello.
My Toshiba A110-178 (with chipset Mobile Intel 945GM Express) does not support Widescreen 19" resolution 1440?900.
How i cant adjus this resolution.
Thanks Ben
Message was edited by: Kuleshov

Hello Ben
Check please this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19677
Maybe you will be able to use 1440 x 900 resolution following described method.
Please give us some feedback!

Can't connect to internet using 3G or WLan on Satellite A110-178

I am not able to connect to the internet neither with my 3G modem or wireless.
The error messages says i should check the settings or that it's impossible to find any connections.
When i turn on the computer, i've noticed that it takes longer than usual and there comes an error message which says this:
+"Failed to connect to a windows service windows could not connect to the System Event Notification Service service.+
+This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond."+
I would most appreciate any ideas on how to solve this. i've tried to turn off my antivirus program as well as the firewall and all the things my 3G support
told me to do.
Thanks a lot!
/Lena

Hey Lena,
Have you already checked the system event log as the error message suggest? This is always an interesting thing where you can try to find more informations about this error so please check this first!!!
Im not a Windows specialist but check the Services (Start > Run > services.msc). Make sure that System Event Notification Service is running or try restarting this service.
By the way: Can you also tell us what OS you are using at the moment?
The driver for WLAN card is up to date?

I'm searching AC-adapter for Satellite A110

I would like to purchess a AC-adapter for my notebook (Satellite A110-178). Where can I find it?

And? Did you find it??
No?
The Satellite A110-178 uses Ac Adaptor PA3467E-1AC3 65W 19V 3.42A
If you want you can visit the Toshiba Options & Accessories site and you will find the same AC adaptor.
Try to search for this part number and Im sure you will find several offers and online shops which provide this part.

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

ITunes 11 - Burning Playlist to Audio CD fails when including CD Text

I just started running into an issue where I am unable to burn an Audio CD and include CD text.
I tried everything including different burn speeds and cannot get it to work. I get the error:
The attempt to burn a disc failed. An unknown error occured (4000).
Luckily nothing is ever written to the CD, so I am not making coasters.
For kicks to make sure iTunes CD burning was working for anything, I selected Data CD instead of an Audio CD, and the Data CD succesfully burned.
Then I attempted to burn the Playlist and unchecked "Include CD Text", and the CD was successfully created.
It has been a while and that means it was with a prior version of iTunes, but I have successfully burned playlists with CD Text. How come this is not working in iTunes 11.0.0.163?
Anyone have any recommendations how to fix the CD Text Issue?
John

I have the same problem...I used to purchase music and burn it to a CD for my car and when I updated my itunes, (which I wish I hadn't and doing a system restore failed) I can not figure out how to burn any music off my itunes...I need to burn a CDS for church this Sunday so please help...

Satellite Pro A110-178 doesn't start up

Hi all,
I really need some advise here...
My A110-178 does not start up at all! After pressing the power button, the power and battery light are lit (both blue, so my battery is fully charged). The HD-indicator gives a very short blink, and after that NOTHING happens... No fan, no HD, no screen, no sound, nothing!
My machine is four months old, and apart form the XP and Office 2003 only Adobe Photoshop and Symantec Client Security are active. Last logoff and power down was absolutely normal and by the book, so I'm really lost on what the right course of action might be (apart form calling Toshiba and be without pc for considerable time)...
Can someone help?
Thanks,
Erik

Hi Erik
Please remove the battery, connect your notebook to AC adapter and try to start notebook again.
If notebook starts wait a little bit and when operating system is properly started insert battery again. Please let me know what happen when you try to do this.

Satellite A110-195 PSAB0E - sound card has stopped working

Hello,
My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
Realtek is default audio
Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
Chipset Utility - install ( Did'n't Worked Aswell)
Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
Try a System File Check
go to Run - type "sfc /scannow" No Success.
I have installed windows again but no success. :(
Here Is The Detailed Model No. Satellite A110-195
PSAB0E-00F00KAR
Windows XP Home Edition SP2

No It Appears In Device Manager And In Control Panel.
This Method Worked But The Sound Level Was Not As Good As it Used To Be:
tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

Can no longer Burn Audio CD's

I have a Compaq CQ50 142US laptop and have never had any problems burning audio CD's until about a week ago. Now when I drag several tracks from my Windows Media Player library to the "Burn List" column and click the "Start Burning" button it shows that each track is being "Analyzed"- then ,"Being Burned to CD"- and after showing this for the last track in the list it says "Disc being Finalized". Now in the past after a few seconds the CD/DVD tray would automatically pop open and I would have a great sounding CD,but now I have to press the button on the tray and there is nothing on the disc. But when I put the same disc back in and try to burn again I get a message telling me to put in a BLANK disc. I contacted the online techs and was told several things that should correct the problem ,including performing a total wipe and restore which I did with no positive results so I took my problem to a local computer repair shop and they said that it appears that my burner is shot. They didn't have any there so I figured I would order one online. I may have failed to mention that I am by no means a computer whiz so when I tried finding the correct part to hopefully solve my problem I realized quickly that I was trying to speak a totally different language and would need some expert help. So here I am !....All I know for sure is that my laptop supposedly has the "LightScribe" feature and that when I go to "Device Manager" and click on, "DVD/CD-ROM Drives", it says that my laptop has a, "TSST corp CDDVDW TS-L633L ATA", with no mention of LightScribe. I went to several sites offering parts for laptops and found that there are dozens of burners with SOME of the letters and numbers as mine, but none that are exactly the same . There was, DVD +RW TS-L633 , DVD PLUS over MINUS RW Drive 485038-001 TS-L633 ,DVD RW CD RW Combo Drive SATA TS-L633, and one that caused a bit of concern since I am supposed to have "LightScribe" was the one marked, DVD RW Lightscribe Drive TS-L633 .
Can someone please tell me which part number I need to order so I will be able to burn CDs as well as DVDs and will be able to use the Lightscribe feature on my Compaq CQ50-142US Notebook ?
Thank you in advance for any and all help you can offer !

I won't pretend this is a welcome suggestion...but if worst comes to worst, you could consider purchasing Toast.

Problem with burning audio CD's in iTunes 10.x.x

Just had a situation where I had to burn three sets of CD's, each with similar (but not exactly the same) audio tracks. I labeled the discs CD_01, CD_02 and CD_03. The files are recorded .mp3 music tracks. I was sure that each playlist I created for each CD in iTunes contained the correct cuts, though after they were burned as music CD's, the Mac Pro computer and iTunes seemed to get confused about which CD # and playlist was loaded. iTunes apparently did not burn the correct playlist that was selected.
I re-burned the discs and when I thought they were finally right, we tested the master discs on our car stereo, and we could see all the track information fine and that the CD disc numbers were correct. However, when we made duplicates of those master files, once again the computer and iTunes again appeared to be confused! The disc master that had been confirmed to be CD_02 was now coming up as CD_01!! And when I loaded the discs into a different computer with iTunes 11, none of the track information that was once visible could be seen! The disc was called "Audio CD" and each track was reduced to just a number. Now my fear is that I have sent out discs with all incorrect versions on them !
Has anyone else had issues similar to these when burning audio CD's?
Thanks!

I also seem to have problems burning with the new iTunes 7. I thought it was neat I could backup my whole collection and that worked fine. But just burning an audio CD seems to be a problem. I've successfully burned one and this was accomplished by deleting one song from the playlist. I'm not trying to burn multiple CD's from a long playlist.
iTunes.
1. Checks media Ok .
2. The message says it's initailizing the disk.
3. The first song starts to burn and it stays there showing NO progress. It never burns.
What I've tried also is lowering the burning speed, unchecking and rechecking boxes in the burning preferences (like including text). I've used different media.
Seems to be a bug.

Why Don't Burned Audio CDs Retain Title & Track Info?

I tried to burn an audio CD several ways, and it still won't retain the CD title that I have assigned, or the track names.
When inserted into other computers, the CD is called Audio CD and the tracks are called Track 01, Track 02...
What's worse is that when you insert these CDs into other Macs, iTunes tries to guess the name of the CDs & tracks, and since the audio isn't on iTunes (they are just boring lectures that were recorded here), iTunes tries to assing some crazy title to the CD & tracks.
I have checked the box that says "include CD text" on both iTunes and Toast, and this still keeps happening.
Why can't the CDs remember the names of the tracks, or at the very least, the names of the CDs?

You're welcome.
We all need someone else to point out the obvious from time to time.
tt2

Itunes won't burn audio cd

itunes asked me to update so here i am version 10.6.3.25 i'll
be reluctant to upgrade in the future... IF i can resolve this error!!
it now fails to burn audio cd's. previous version had no problem.
before anyone says anything about my cd burner... since the upgrade
i've used nero to burn itune files to an audio cd just fine. it's
NOT the burner. also after the upgrade itunes imported a prerecorded cd
with no problem.
now whenever i select "burn playlist to disc" itunes status appears "preparing disc"
then error popup comes up "The attempt to burn a disc failed. An unknown error occured (-3)"
i also tried burning WITHOUT "Include CD text"
i could use nero but prefer itunes for burning cd's... can anyone help?
running itunes idagnostics on CD/DVD drive gave the following:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gateway FX530XV
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013A36C0E594A68
Current user is an administrator.
The current local date and time is 2012-07-26 14:07:20.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 7600 GS
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently not running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: HL-DT-ST DVD-RAM GH22LP20, Rev 1.02
Audio CD in drive.
Found 10 songs on CD, playing time 30:47 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:50:27
Track 3, start time 05:37:34
Track 4, start time 08:45:54
Track 5, start time 11:49:41
Track 6, start time 14:37:24
Track 7, start time 18:09:28
Track 8, start time 21:42:02
Track 9, start time 25:11:37
Track 10, start time 27:43:55
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   8 10 16 40 48.
The drive CDRW speeds are:   8.
The drive DVDR speeds are:   8.
The drive DVDRW speeds are:   8.
Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code -3(0xfffffffd). It happened on drive E: HL-DT-ST DVD-RAM GH22LP20 on CDR media at speed 0X.

I'm having a similar problem, but without any error message at all.
I have a number of audio files that I created myself using garage band. These were converted by Quicktime to .mov audio files and loaded into my iTunes library. Before I upgraded to Snow Leopard, I was able to burn audio cds from playlists containing these audio files with absolutely no problems.
After upgrading to Snow Leopard (OS 10.6.8) my software update told me that I also needed to update my iTunes. What a mistake that was!
Now, when I select a playlist and tell it to burn an audio cd, it asks me to insert a blank disc. Then it looks like it's starting to prepare the disk image - at least for a couple seconds. Then it just quits and goes back to the state it was in before I attempted the burn. The cd is still inside the drive and the only way I can eject it is to quit iTunes.
I might add that, since all these files are my own original creations, none of them are protected in any way, so there is no reason for iTunes not to allow them to be burned on as many cds that I want.
I know my disc burner is working because I am able to burn audio disks using the 3rd party software called "Burn."
The audio files are also OK, because I can play them in both iTunes and with Quicktime.
I really hope someone has an answer for this. I need to burn a lot of CDs. My church choir members use them to practice their singing parts. The "Burn" application I am now forced to use works, but it is very awkward to use. I wish I had never "upgraded" my system. I GUESS IT REALLY WAS A DOWNGRADE!
Help!!!

HT1349 Option to "include CD Text" Inactive When Burning CD

I have always included CD Text when burning CD's from iTunes up until last week. I downloaded the latest iTunes update on Monday and suddenly This option is not active when I attempt to burn CD's using my external Samsung CD / DVD Writer. Why has this now happenned? Has anyone else experienced the same thing, if yes, is there a cure? Thanks

I like Nero better when burning. I've only burned a few cds with iTunes so I can't really tell you. You can just open up iTunes and drage the files into Nero (when its asking for files to add to the mp3/audio/whatever disc).

Cant Burn Audio CD in iTunes

I have an iMac G3 10.3.7 with iTunes 6.0 and Im having trouble burning Audio CDs from iTunes. Anyone have any suggestions?

Hi everybody,
It sounds like you all might be talking about a problem that a lot of us are having involving burning purchased music in iTunes 6, specifically in 6.0.1. I'm including the name of the thread in question:
"Can not burn purchased music since upgrading to 6.0.1"
Just enter that into a thread search and you should be able to find it.
Kay, not to put you on the spot, but I notice you have a lot of answers to other questions regarding iTunes on the forums... Any ideas why I can't burn purchased music on iTunes 6.0.1 (problem didn't occur 'till I upgraded)? It tells me (and others) that my burner speed is to fast. But no adjustment of the burner speed helps. I can burn imported (ripped) music onto a CD just fine, the hardware works. I tried "repairing permissions" on my hard drive (as per a friend's advice), then was able to burn a CD-RW with success. Tried burning the same playlist with purchased songs onto a CD-R, same "burner speed imcompatibility" message. I've ruined 5 discs this way, and desperately need to figure out a solution. Any thoughts?

Satellite A110-178 - Burn audio CD including CD-text

Similar Messages

Maybe you are looking for