Satellite A200-13O: Help in installing Vista Ultimate from Basic

I need help in installing Windows Vista Ultimate in my A200-13O.
My current operating system is Windows Vista Basic and I want to upgrade it to Windows Vista Ultimate.
Based on the driver download section I need the following drivers to be installed.
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221
I have already downloaded most of them but I can't find some like [2] Intel ICH7M Chipset Utility, [11] Intel Kedron Wireless LAN Driver, [23] TOSHIBA Speech System. Also some of the drivers are not installing properly.
Can you please help me out.

The chipset driver you can get on the Intel webiste
www.intel.com
But I think the driver could also be in the display driver because its the same chip.
The WLAN driver I have found on the Toshiba website so download and install it.
The speech system could be integrated in the sound driver.
But download and install all drivers and the system will work.

Similar Messages

Satellite A200-1CR: Can I install Vista using my Vista installations DVD?

Hi
I would like to have some answers in my questions......
I have satellite A200-1CR (PSAE0) and I want to install vista on my own....not with the recovery DVD but I have some serious questions....
1) May I have problems during installation....(SATA drivers, etc) ,problems with BIOS or Toshiba has no such restrictions?
2) Is it problem if I erase the secret partition (winre) and what is its use?
3) If I do a clean install with my DVD with my vista....if I want in the near future can I use the recovery DVD I have got or not?
4) In drivers section for my laptop for each part has 5,6,7 either 8 drivers for win vista...which one is the proper or it's all the same?
5) In general what do you suggest? Are there any reasons why not to do my format??? I have done a lot of formats in desktop but never in laptops.
Sorry if tired you with my questions, and sometimes my bad English....
Thank you in advance........

Hi
I think I can answer some questions lets start with
> 1) Vista DVD has SATA drivers but WXP doesn't. Do you think the possibility not to recognize the HDD is high? I can't understand where you mean to install the HDD drivers.....
As Gipsyman already posted you need the Intel Matrix Storage Manger. If you use the XP then this driver must be installed from the external USB floppy disk drive. You have to put the sata driver on the diskette and should include the SATA driver while the
Windows XP setup is running. I think you have to press F6 to include the driver.
But if you dont have a external USB floppy drive then you could create an own XP CD with the SATA driver. To create a new XP CD you need the freeware tool called nLite (google for details).
If you want to install Vista then you could include the SATA driver from the USB stick.
By the way; this forum provides more as enough details about Intel Matrix Storage Manger and nLite. Use the search option!!!

Satellite A200-TR6 - Can't install Vista SP1

I've got Windows Update set to automatically install any updates, but it's failing on installing SP1. Specifically, I've had SP1 in my "Pending Updates" folder for a few months now, but it never installs. When I try and do it manually (as in by selecting "Install Now"), it goes through most of the process, and then says that it has failed and will try again. It then restarts, tries to install it again, and after about 45 minutes reports that it can't.
I recall reading somewhere that it was caused by an incompatibility with the driver for the built-in webcam, but there were never any solutions presented. Any ideas?

Hello
I think you must only check this article from the Microsoft Knowledge Base:
http://support.microsoft.com/kb/947366
Greets

GX720 barbone can't install Vista Ultimate 64

hi everybody! i have gx720 barebone and i tried to install vista ultimate 64 bit on it! everything seems nothing happened ! but when i tried to activate it and restarting! its stops at ms boot screen !the green slide still running ! but it doesnt boot ! and i have to reinstall OS again ! i need help ! cpu t9600 4gb 7k 320gb and i usually this activation way and OS alot. so do i need update bios or what ? i need help !

Quote from: DarthBane on 05-July-09, 07:01:56
i have vista x64 installed. You are going to have to be more descriptive and clear.
Mike moved your post and gave it a topic; he didn't offer any advise on your issue.
4 GBs of RAM means you have added more memory. Are you sure this memory is compatible? Have you tested the stability of the upgrades with Memtest86+? Does it work without the extra memory?

Cannot install Vista Ultimate 64bits on Mac Pro 2008

Hello,
I'm trying to install Vista Ultimate 64bits on my new Mac Pro (2008, 2x Quad Core, 3x 500GBHDD, 16 GB Ram), but Vista is unable to find a correct partition type.
The first thing I did was to install a 4th HD, and I constantly received an error 0x80004005 which seems to be too generic.
Then I tried to install it on the 3rd HD (Bay 2 is where my OS X startup disk is located btw) but here no way neither....Windows cannot find a valid partition.....
I tried to partition it manually in MBR...same problem....
Then with BootCamp assistant...same problem...
I also tried to use Vista Business 64 SP1, same problem...
Do you have any idea ?
Thanks,
Patrick

Hello,
Thanks for your answer, but unfortunately I'm still stuck...
To resume the situation :
I put a brand new 250GB SATA in the bay 4.
I start Bootcamp Assistant and tell him that I want to use this new disk for Windows and then start Vista x64 install.
Vista sees 2 partitions on this new disk :
Disk 3 Partition 1 : 200 MB (Primary)
Disk 3 Partition 2 : 230 GB (Primary)
If I try to use the P2 for the install, I have to format it first. Once formatted, Vista says : This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu.
If I try to use the 200 MB (just for fun..), then I also have to format it, but here I receive the error message 0x8000xxxx
So clearly I'm lost...
Could it be related to the 16 GB RAM ? Too much for Vista ?? I don't believe as this is Vista x64...
Thanks for your help, ideas..
Patrick

No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
Any thoughts?

Did you install the drivers from the computer's software install DVD?
Please post further questions regarding Boot Camp in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Help. Installed the program from adobe in the trial under the same ID.

Help. Installed the program from adobe in the trial under the same ID. After the expiration of 30 days, our company has registered for acquisition programs. We have introduced a new ID for a trial test, and adobe programs from running. Test time is exhausted. How to run the program under the new ID in a trial.
Помогите. Установил пакет програм от адобе в триал под одним ID. После истечения 30 дней наша компания зарегистрировалась для приобретения программ. Мы ввели новый ИД для триал теста, а адоб программы не запускаются. Пробное время исчерпано. Как запустить программы под новым ИД в триале.

Perhaps extend trial adobe product if 30 days is exhausted? If I go under a different ID that shows 0 days.
Возможно продлить триал продукта адобе если 30 дней исчерпано? Если я захожу под другим ИД то показывает 0 дней.

Problems after upgrading to vista premium from basic

i just upgraded my laptop to vista premium from basic. a couple of changes worth to mention: the system seems to be more stable after upgrading. and ram usage reduced to roughly 47% from 55%.
bad side: can not use thinkvantage to recover my laptop to factory condition. it seems that the option has been removed. and while start-up, if i press the blue ThinkVantage bottom, the system does not go to normal rescue and recovery program.
the other problem i have is the system says i recently changed the system password (seems sth to do with the client security solution software). but i did not.and i need to verify the password. and problem appears, the system says my password is wrong.
any thoughts on these problems?
thx

I agree with Cedric on the repair disk. As you have installed a "different" OS the Master Boot Record has been changed resulting in the loss of the function.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Who has installed Vista Ultimate SB at Satellite M40

Is there anyone who have Vista Ultimate installed at Satellite M40? I've big problems to install Vista. After I disabled the PCMCIA it's OK. I'm looking for a new BIOS-update and Vista-drivers.

Hi
Im a M40 owner but I did not install the Vista on this unit. I use the XP.
I did not install the Vista on this unit because according to the Toshiba document which I found in this forum the Toshiba drivers are not available and I dont think that this drivers will be available in the next time or anytime for this notebook series.
Does the notebook have a Vista capable sticker? I dont think so :(

Satellite A200 - need help with USB boot

Hi to all,
I have a startup problem with my Satellite A200.
I am booting from my USB key. It is bootable Linux to install the tutorial is this:
Insert the USB key or drive you want to boot from.
Restart the computer.
During startup, when prompted, press the appropriate button to display the "Boot Options". Usually it is F2, F8 or F12 (be displayed on the splash screen).
In the boot menu, select the drive to boot from.
The computer will now boot from the USB key or the first disc to change the boot priority back to boot from the hard drive. Perform the procedure again, but to choose the hard drive in step 4 the computer will now boot from the first hard disk.
My problem just part shift to the right that when it restarts with the USB key plugged remain frozen and Toshiba screen is displayed but it does not load anything.
F2 I want to access the BIOS it makes me please wait but nothing happen. I'm nothing like 1hr wait for F12 boot selections except that all boot are marked exceptions to the FDD one on which I want to boot.
So I find myself facing an impasse because for Toshiba loads must be connected to nothing which is silly because I want to boot on my key.
If someone has a solution...
Message was edited: posting has been translated

I check everything has nothing to report ...
everything that was to change on this pc is memory ram replace a 2gb because before that I had 256mb ram memory so not much ^ ^
yes he in the bios (f2) I fdd but by regarding the boot menu (f12) I unfortunately do not have fdd :/
missing entry fdd me in the start menu :/ there no means a small file download is placed on the hard disk to show the "fdd" entry?
Here is my menu (f12):
internal hard disk
CD-ROM
LAN
I even tried to run as my key with each entry in cases where but after a few seconds it gives me windows vista: (
my pc probably lack a forgotten entry in the factory or whatever ^ ^
if someone has a solution ^ ^
thank you
+Message was translated by google translator+

6 Buttons do not function on Satellite U400-10O after upgrading to Vista Ultimate

Hi,
I have upgraded my U400-10O from original Win Vista Home Premium to Vista Ultimate, installed each and every driver and utility program, (some of them, e.g. TVAP several times ;-)
However could not succeed to operate the multimedia shortcut buttons, Led on/off, Media Player, Play, etc... They were functional with the original setup, but I need this Win Ultimate.
What is the real solution to let them work?
Thanks,
EIO.

Hi Jimi,
I have tried to unistall/reinstall the VAP several times, by checking/unchecking that "Toshiba Button Support" however, none helps.
Actually, I also wanted to unistall the control utility first to start from scratch, but I cannot find it at all! Really, what is this "control utility" supposed to be??? I have found several controllers, control managers, and specialized utilities, but I cannot find "THE" control utility.
Is there any place where I can complain about my status to Toshiba? Or how can I access to that legendary thread owner "Mouxy - Daniel" who appears to have the solution? http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=34487
Best,
EIO.

Satellite A200-2BH PSAE6E: Cannot install Flash Cards Support Utility - serial number is invalid

Hi
first sorry for my bad English.
Second I have a Toshiba notebook Satellite A200-2BH PSAE6E I changeg my OS to Vista and I have a problem with "Flash Cards Support Utility". I can't install it.
I have this message error "the serial number is invalid" I don't know what to do.
Thanks for your help

Hmm did you follow the installation instruction placed on the Toshiba driver page?
There installation order is important.
WINDOWS VISTA
No. Component Name Version
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221

Satellite A350-13D - Can I install Vista 64bit?

Hi
(excuse me, I can't speak english very well, sorry if I write with faults)
3 days ago, I bought an Toshiba Satellite A350-13D. It has 4GB RAM, but Windows Vista Home Premium 32 Bit is installed. The computer can use only 3GB.
Can I install Vista Home Premium 64 Bit to use the totality of RAM (4GB)? Where can I download the driver for my computer?
Thanks for your help :)
Have a nice day

Hi!
Of course you can I install Windows Vista 64bit Why not? What do you think?
On the Toshiba website I can find all drivers for Vista 64bit on Satellite A350 so it should all working properly with Vista 64. Check it yourself:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
But note there are two different BIOS versions available One for 32bit and one for 64bit. After installing Vista 64bit you must update the BIOS too.
Bye

Need to install vista ultimate 64 bit

Hi, I recently bought an Apple Macbook Pro 15 with 2.66 GHz Processor, 4GB DDR3 Ram, 320 GB 7200 RPM HDD & Nvidia 9600 GT 512MB DDR3 Graphics Chipset. Actually I want to create a new partition to install Windows Vista Ultimate 64 bit Os so can somebody please guide me? As you already know that the trackpad of this notebook doesn't have any click buttons so can you please tell about how to right click a folder or file on windows vista? Thanks!

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to the installation on Windows. Please post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Will Be Re-Installing VISTA Ultimate

My relatively new Dell VISTA computer is having problems and I will be re-installing the operating system which will remove all my programs and files. I'm backing-up the "My Music" folder, however I would like to find the folder holding the music soley residing in the iTunes music directory. Those selections also reside on my iTouch. Can I import only those iTouch tracks and related album artwork back to the new iTunes directory after re-installing VISTA and iTunes?
I can't seem to find the iTunes music directory on my hard-drive. If that is not possible, because iTunes only utilizes the allowaqble tracks in "My Music", is there a way to reverse sync music tracks/artwork from my iTouch to the iTunes msic directory?

Depending on how iTunes is setup for you, the iTunes music is stored in the itunes folder in the my music folder. Backup the ENTIRE itunes folder the deathorize iTunes before reinstalling windows. Deauthorize before hand to keep from using up one of the authorizations.

Satellite A200-13O: Help in installing Vista Ultimate from Basic

Similar Messages

Maybe you are looking for