Satellite A200-14e: BSOD when using FN buttons

Hey all and mind my english its not so well.
Ok i have problem with my laptop its Satellite A200-14e and when i press FN button for toshiba flash cards it just pops BLUE screen and it shuts down my comp!!!
ANY HELP IS WELCOME.!!!
Thanks in advance.
P.S. I already instaled new value aded pack and flash cards driver(thast when all problems started)

Did you uninstall TVAP before installing the new TVAP?
Did you install the A200-14E TVAP? Or TVAP from another model?
ps. you can disable the Flashcards bar in the Flashcards utility under Start->Programs->TOSHIBA

Similar Messages

Satellite A200 - Error code when using fingerprint

Hi
I have Satellite A200 with window vista 32 bit, when I try to log in via finger scan I got the massage (error code oxe 7210001 (An internal error occured (shared: encrypt-cryptopp(StreamTransformationFilter: invalid PKCS #7 block padding found)).)
Can any one help me?
Thanks

Hello
Im not an expert with this fingerprint tool but I noticed here in forum that reinstalling the fingerprint software could help to get rid of this problem.
According the Toshiba website the newest fingerprint software is version 5.8.0.4024.
Do you have it installed? If not reinstall the fingerprint software and test it again.

Random BSOD when using more than 1 stick of RAM - Toshiba L505-S5990

Greetings.
A friend's Toshiba Satellite L505-S5990 began having BSODs randomly - during boot, inside Windows, when shutting down etc. It also has problems turning on - I have to repeatedly press the power button. Sometimes these problems would not appear for days or weeks.
It has 2 sticks of Samsung branded RAMs, 1x2gb and 1x1gb - they seem identical except for the capacity (both bearing stickers marked PC2-6400s-666). I think these are the factory installed RAMs though I am not sure.
When I try to use either of the RAM sticks alone, placing either one at different slots, the BSOD problem seems to disappear. ((1)1x1gb on slot a, (2)1x1gb on slot b, (3)1x2gb on slot a, (4)1x2gb on slot b). When I put in both sticks on either slot, bsods appear.
Windows 7's built in Windows Memory Diagnostics found no problems with both sticks. I tested them one at a time. The HDD also gave no signs of problems when tested with chkdsk (/f /r) on another PC.
I reformatted the notebook and reinstalled Windows 7 32 bit using 1 stick of ram (the 1 gb I think). Still crashes when using both sticks.
Please help. Thanks in advance.
ps I am currently downloading updated bios and drivers to see if installing those would help.

Your support page is here - http://support.toshiba.com/support/modelHome?freeText=2439393
Your specs say that your laptop was configured with 3GB of RAM and it can have a maximum of 8GB.
Just to add:
I have a similar issue on my old Toshiba for approximately 3 years, it will only run with a maximum of 2GB of ram. Any more and the BSOD or just black screen. This issue was guessed to be some type of power issue by service tech. I purchased a new power supply and battery incase that may be the issue but no fix. Works for what I use it for.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Re: Satellite A200-1ZF Win XP & Toshiba Control buttons don't work

Hi,
I have a Satellite A200-1ZF with Vista installed originally.
I removed Vista and install XP. And then installed all drivers and almost everything is working but those keys (power,www,mediaplayer,play,stop,back,next) on the upside of notebook don't work. :/
Only power work properly ...sometimes www and mediaplayer, but rest of it doesn,t work at all.
I have Windows Media Player 9 series. I don't know if it is problem with my drivers or windows media version or something else..
please help..

Hi
Satellite A200-1ZF belongs to the PSAE6E series.
Choose this series in the Toshiba European driver download form.
There you will find a XP BIOS. If you are using Win XP on this notebook then you have to update the BIOS to the XP version!
Furthermore you have to install the Toshiba Controls v. 2.48.2.2C.
This tool is needed to get the Toshiba Media buttons working!
Bye

Satellite A200-1S5 - Can I use a second HDD and RAID?

Hi all,
Is Toshiba Satellite A200-1S5 eligible for adding a second hard drive? It has RAID controller as far a I know - could it help?
Thanks,
Denis

The Satellite A200-1S5 does NOT support RAID!!!
But some A200 could use two HDDs (but NOT RAID!!!) There are different A200 models which supports different hardware specifications.
Therefore you can find the second bay at the bottom of the unit.
But if there is no connector for second HDD then this means that there is no second HDD controller and you cannot use second HDD in this A200!!!
Bye

Errors when using Spark Buttons in dynamically loaded modules loaded by dynamically loaded modules

Ok ... I have to admit this issue is rather special ;-)
I have a flex application that loads a list of modules after the user logs in, depending on the permissions of the user.
One of these modules contains a component, that allows the user to configure settings for different types of objects.
For each object type (can be extended) there exists one module swf.
The strange problem I am having now is that as soon as a Spark Button (or anything derived from one ... CheckBox) inside the settings-module. I get the following error (unfortunately in german ... but I'll try to translate).
This error happens when using a spark CheckBox (Which is derived from Spark Button):
ArgumentError: Error #2004: Einer der Parameter ist ungültig.
at flash.display::Graphics/drawRect()
at mx.graphics::RectangularDropShadow/drawShadow()[E:\dev\4.x\frameworks\projects\framework\ src\mx\graphics\RectangularDropShadow.as:575]
at mx.skins.spark::BorderSkin/updateDisplayList()[E:\dev\4.x\frameworks\projects\sparkskins\ src\mx\skins\spark\BorderSkin.mxml:174]
at mx.core::UIComponent/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework\src\m x\core\UIComponent.as:8709]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework \src\mx\managers\LayoutManager.as:663]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:718]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
When having a look at the problem the cause is that width and height are not set (NaN).
If I use a plain Button I get the same error in "drawRoundRect".
As soon as I change back to a mx-Button/Checkbox, everything is fine.
In my current Case I wanted to use a custom TreeItemRenderer to display a CheckBox in the tree. This tree Item renderer is included in a custom Lib that is used by all modules.
I have one Second Level module using this renderer. I have one Third Level Module thas uses the exact same tree definition. If I use the MX CheckBox I get CheckBoxes in the Second- and Third-Level Module. If I use the Spark-CheckBox I get a CheckBox in my Second Level Module and the above Error in the Third Level Module.
To make everything even stranger: I have a custom component loading my modules and I use this in the Top Level Module to load the Second Level Modules and in my Second Level Module to load my Third Level Modules (So I would guess If my loader is broken, then the Second Level Modules should not work either).
Help is greatly appreciated :-)
Regards,
Chris

Ok, I managed to find out what was going wrong and to get my stuff working again. I have to admit that I have no idea why my application / flex was showing this behaviour. The only way I could track this down was by undoing the Subversion checkins one by one. Finding out what was happening using common sense seems to be out of the question with this issue.
My application is built up of a main application swf that loads module swfs and a library swc that contains common stuff and is used in the main application and the modules.
I now had some custom TreeItemRenderers in my modules. The problem was caused by moving a custom TreeItemRenderer from one module to the library-swc. I could successfully reproduce this. If I add only one class extending TreeItemRenderer to my library (I don't even have to use it), the entire flex system goes haywire. As soon as I remove that class, everything is ok. I checked, if there might be a problem with third party libs containing flex core classes which might be used instead of the sdk ones, but after looking at the catalogs of the third party swcs I couldn't find a reference to TreeItemRenderer.
Any Ideas? I sort of dislike the idea of being able to run into such strange problems. Is there a tool that allows me to check for class compatibility issues?

Error Message when using menu buttons in IE but not chrome

Hi.
My recently uploaded site has an issue when using the menu buttons anywhere on the site in Internet Explorer but not on my mac using chrome? I get this error message come up on screen which takes three clicks to go away MuseJSAssert: Error calling selector function:TypeError: Object doesn't support property or method . Then if I click anything else it pop ups again. Any ideas how to get rid of this? I have tried re-uploading the muse files but the same happens. I even tried uploading the files from a different exported frm muse folder as I saw had worked for someone else on here but no difference? Any help much appreciated.
Website : vanletteringco.com
You may get an error that iPage are sorting when opening too, just delete the /root1 in the address bar to see the site?
Thanks
Gav

Hello,
I am only getting the MuseJSAssert error on the contact page of your site when viewed in Internet Explorer.
And as I can see you have used a webform from Jotforms which I suspect might be creating issues here.
I would suggest you to remove the form once and then upload your website again. if it starts working fine then get the Embed code of your form again from Jotforms and insert it again to check if it works fine or not.
Please let us know the results of the testing.
Regards,
Sachin

Satellite A200-1RK error when starting up

Hi,
I hope someone will be able to help me.
I am not very clever when it comes technology so please bare with me. My mum has a Toshiba Satellite A200-1RK laptop which she has had for few years now. She recently dropped it and when she turns it back on it comes up with an error message saying " windows failed to start, a recent hardware or software change might be the cause" then it gives you 2 options, 1 is a recommended recovery option and the other one just tries to load windows.
I have tried both and they just come up with the windows loading screen and doesnt progress from there. Anyone got any advice on how this could be fixed. My mum has a lot of pictures that she didnt get round to backing up on the hard drive and as you can understand these are important to her. It might just be a case that something has been knocked out of place when she dropped it, Im not sure. Should I take it to a shop to get fixed? I just dont like going to these places if I dont have to because I really have very little knowledge on the techie lingo etc.
Thanks.

Hello
Can you start Windows in safe mode? If yes its just a software or driver related issue because in safe mode no drivers will be loaded.
If not it seems that something has muddled up the Windows installation and therefore you have to reinstall the whole system. Therefore take the Toshiba recovery disk and follow the screen instructions to restore the original factory settings.

2005 A Add-on upgrade to Sp01 u0096 Disconnects when using VCR buttons

I have a strange issue after I upgraded my add-on to 2005 SP01.
The add-on seem to work fine except when the VCR buttons are used I get a system message Add-on XXXX is disconnected.
Im not doing anything with the VCR buttons.
And the Add-on continues to run in the background, although SAP isnt connected to it any more.
And I dont get this error when Im debugging it.
This only happens after Ive installed it as an add-on.

Hi John,
Thanks for your assistance. i followed the steps and now its working.
Regards,
Jennifer

Safari 5.1 reloads page when using back button or gesture

Safari has the strange behavior of reloading pages "navigated to" using the back button or gesture. Most other browsers I've worked with pull from cache when using the back button. I don't think this behavior is compliant with standards - defacto as they may be.
An example of why this is wrong is the navigation of this forum. I just loaded Lion and need to use the forum for support. When navigating back from a particular post to the list of posts the page will reload. Needless to say several hundred posts have been entered since last looking at the list and I subsequently lose the context of what I read last. The list of posts from cache which I orginally looked at should be returned - not the latest updated one. Let me choose when to refresh a page from the cache.
I downloaded Google Chrome to compare behaviors. Chrome does not reload pages navigated to using the back button - it pulls the pages from cache.
I've looked at the configuration of Safari and see no options to configure this behavior.

Switch from one finger swipe to two finger swipe
ok, since i do not have a trackpad, i used my magic mouse. I changed my swipe between pages from one finger to two and my pages no longer re-loaded. Changing that option back to one finger swipe then set my pages to re-load our setting are slightly differnt, but were looking for the same outcome. Lood for a "Swipe between pages option. Then look for a drop down triangle. now change your swipe left or right with two fingers to one. this should re-load your pages now ;-)

Satellite A300 and WIn7 - cannot use media buttons

I have Satellite A300 laptop.
Recently I reinstalled my Windows 7 Pro x64 using update option (not clean install). So I kept my program and settings. However the media player panel (or whatever it is called) that lets me play, stop music, change songs etc. is not fully working. I can't use 2 "buttons": one that lets me turn on/off highlighting and the other one that turns media player on.
I need them working. I tired Toshiba button support, but I don't know what to do there.

Hello
What you must install is Toshiba Value Added Package. I use Win7 on my A300 and all buttons work perfectly. But I use 32bit version.
I dont know if your A300 is supported for Win7 64 bit but you can try to use THIS version.
Before you start installation remove old version, if exist, restart notebook and install this version.
I hope this will help you.

BSOD when using Itunes And/Or when connecting IPOD classic

I have started getting a blue screen of death (BSOD)when opening Itunes followed by opening Iexplorer after a computer restart. I also get the same error when connecting the Ipod 80gb classic, it may take 3 or 4 attempts to get the Ipod conencted, initial recognition but then "ok to disconnect" within 10 seconds.
Error code is 1000007e, parameter1 c0000005, parameter2 804e83e8, parameter3 f7938a68, parameter4 f7938764. with no driver of sys file identified.
Currently driving (no pun intended) me crazy. I have updated all drivers I can think of, uninstalled and reinstalled Itunes and Apple Ipod device drivers with no solution.
Thanks
Ken

See this page from another forum member turingtest2.
Grouping Tracks Into Albums
B-rock

Satellite L350D - Webcam hangs when using windows messenger

Does anybody knows this problem, when using windows messenger and the webcam the webcams hangs afther a few seconds..
Already reinstalled webcamdriver and messenger but the problem still is...

Did you install the Vista SP1?
If no, install the SP1 and follow with instruction below
If yes, try this;
Start the msconfig and disable the Windows messenger and chicony webcam from automatic loading.
Just remove the ticks and save the settings.
Reboot the notebook and check if you can use the webcam together with the messenger.

Why do I get random BSOD when using Firefox with windows XP pro 32 bit? Seems to happen since system updates on 01/09/13.

I am using Chrome to write this and no crashes. I have defragged with the system defrager and Defragler both. I bought new memory but this issue happened a couple days after install around the time of some microsoft updates 01/09/13. I have run Memtest and a hard drive test as well, done a power cycle and run a disk cleaner. This only happens when using Firefox.

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Satellite Pro 4600: BSOD when I use Vodafone PCMCIA card

I want to use UMTS on a Toshiba Stellite Pro 4600. I got a PCMCIA Card from Vodafone and installed with all updates.
But if I want to use UMTS and, that means start the application and connect to Vodafone, Windows shuts down with a Bluescreen:
DRIVER_IRQL_not_less_or_equal STOP 0x0...D1, 0x0...00, 0x0...02, 0x0...00, 0x0...00.
I think the IRQ allocation is not that good : http://img96.imageshack.us/img96/7151/toshibamw0.jpg

Hi
Did you check if this happens with every PCMCIA card?
I have noticed that the Vodafone card causes the BSOD on some notebooks with P4 CPUs and enabled hyper threading technology.
http://support.toshiba-tro.de/kb0/FAQ5300W6000YR01.htm
But there could be also a problem with the Vodafone card firmware.
A firmware update could helps.
Try to contact the Vodafone support for the new firmware and further details

Satellite A200-14e: BSOD when using FN buttons

Similar Messages

Maybe you are looking for