Satellite A200-19l driver XP for Nvidia GeForce 7300 not working at all

After downgrading from Vista to XP, my A200-19l doesnt find the Hardware to the GeForce 7300... no driver working, wether Display- or new Forceware drivers from Nvidia homepage. The Hardware Manager still shows a ? for the "Video
controller".... the Geforce 7300 isnt shown at all as Hardware...
what can I do... thanx for any help!

Hi
Its very simple. You need an compatible graphic driver!!!
Did you already check the drivers from these pages?:
www.omegadrivers.net
www.laptopvideo2go.com
Anyway, the graphic driver from the nVidia page should works also!!!
You have to install the driver in the device manger. Dont install it automatically but force the driver installation.
You have to choose Install from a list or specific location (advanced) and then Dont search. I will choose the driver to install.
Thats all!!

Similar Messages

Reccomendations needed for NVIDIA GeForce 7300 GT replacement.

I just had my third NVIDIA GeForce 7300 GT graphics card fail (got them replaced through Apple Care which has now expired). I need to get a replacement graphics card but do not want another one of these!
Specs on my '07 Mac Pro:
Model Name:    Mac Pro
Model Identifier:    MacPro1,1
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    3 GHz
Any recommendations greatly appreciated!

Requires 10.6.5 - and 10.6.5 DVD retail don't seem to exist for anyone that doesn't already have 10.6 installed which means "no booting from DVD for us" if needed, and 'slipstream' drivers also is a no-go. In Panther 10.3 you could, BootCD was a great tool to have current OS X on your own DVD. Now you need to create your own flash based boot volume or something.
Check the display setup tips, running multiple displays isn't always obvious.
Radeon 5870 and 5770 on 2006 Mac Pro
I don't even think that even the custom driver folks have Leopard drivers.
Most of their sights are on ATI 6xxx or GTX 500s, and Lion.
netkas.org forum

Nvidia GeForce GT430 not working in OSX

Is there any way to get a Nvidia GeForce GT 430 working in OSX on a Mac Pro?

Is there any way to get a Nvidia GeForce GT 430 working in OSX on a Mac Pro?

Gaming: driver update for NVIDIA GeForce - Sat P20

i am not able to run an driver update for my NVIDIA GeForce FX Go5600 on Satellite p20-521. can someone help me out please.

Hi Cuong
I assume you use a wrong graphic driver or a wrong graphic card driver update procedure.
Toshiba recommend to use the own graphic drivers. The all drivers for European Toshiba notebooks you will find on this website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
After successfully downloading please unpack the driver. There you should find a setup.exe. Please install it.
Well, if this procedure doesnt work so please go to device manager and select the graphic card and right click. Then you can select the option update driver. The driver source is the driver download place.

AME CS5.5 Hanging at 75% & Drive Update for NVIDIA GeForce GTX-470

Hello,
I am having problems with AME CS5.5 hanging as well. I was wondering if somone from Adobe can tell me if the latest Driver upgrade for my NVIDIA GeForce GTX 470 card of 285.62 is safe/recomended for Adobe CS5.5 Premiere/AME/Encore/After Effects programs. I do not want to cause any additional issues with my Adobe related issues. My present driver is 280.26...Thanks, Steve

I installed the update after creating a restore point.
I guess it's safe, but the behavior is the same. I still have the hanging issue.
I hope that this bug gets fixed soon.,

Driver Update for NVIDIA GeForce 6150SE nForce 430 for Windows 10.

When will HP put out a update to this Display card so we can upgrade to windows 10. This card is in a lot of HP computers and they cannot upgrade to windows 10. This is the only item that is holding me back from upgrade.

You may want to give my suggestion a try. Worst case scenario is you add a $35 video card or roll back to W7. Here is how to roll back to W7 from W10 if things don't go as planned. I still think my idea has a good chance of working. http://www.askvg.com/how-to-restore-previous-windows-version-after-upgrading-to-windows-10/ Yes, it would be nice if the hardware manufacturers would develop W10 drivers for all devices that worked on W7. You get this hype about a free upgrade and then you can't, because the hardware doesn't have driver support. But if you read the system requirements for W10, your PC meets those requirements. Basically any PC that could completely run Vista should have been able to run W10. But nVidia won't be developing any W10 drivers for that chipset and graphics. They didn't develop any W8.1 drivers either. I have an old HP nc6400 business notebook PC, and there is only driver support up to Windows Vista. I installed W10 and it works just fine. I manually installed some of the Vista drivers and used the W7 Intel graphics driver from Intel. Sometimes if you can't go through them, then you have to go around them.

Satellite A350 - Toshiba service station for Win 7 is not working

I am using a Toshiba A 350 and downloaded Toshiba Servc\ice Station utility for win 7.
It fails to open (even if admin rights).
The TsmachInfo service is started in srvices.
Any workarounds or do i have to install somthing more to this working?

Hi
As far as I know you have to unzip this firstly and then you have to execute the exe file
Check this
Otherwise its a OS issue because the exe file should run properly and you should be able to install this tool.
Greets

I accidentally deleted a driver and now my wireless will not work at all.

in a state of frustration i accidentally deleted a driver. I think it was the astero driver and i downloaded it again via the hp website. it is installed, but my internet isn't (i'm using a friends verizon card). i don't know if my deletion of that driver/software did something severe and i have no idea how to get my wireless back working.
HP Pavilion dv6-3019wm entertainment notebook
windows 7 64-bit

Please download and install the driver from the following weblink:
http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Shuffle (2nd Gen) not been used for a few years - not working at all - any ideas?

My Ipod Shuffle (2nd Gen) has not been used for a long time and now will not give any reponse at all. It won't charge and it is not recognised by ITunes - is there anything I should do?

Sorry... I did not notice your reply.
The initial blinking is good. That means there is a connection between shuffle and computer. But it should continue blinking or become a solid color (ON but not blinking).
It could be a problem with the battery. If a lithium battery is left completely drained for an extended period, it can become unable to hold a charge. However, it could also be a problem with the USB port (such as not enough available power or a USB device conflict). As a test, you should try shutting down the computer and disconnecting all USB devices, including any hub, except for standard keyboard and mouse (if normally used). If your computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on computer.

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

Satellite A200 - Need driver for CD/DVD drive

Hey folks.
Recently installed WXP Pro on my A200 PSAEC laptop, so I'm now dual booting XP and Vista on my laptop.
Problem is, I've got all the drivers working on XP and everything's running perfect, but when I tried to burn a DVD, Nero says the recorder can't burn DVDs. In "My Computer" the drive shows as a DVD-RW drive, but when I insert a blank DVD, it says CD Drive. The drive shows up as "TCSDcor' CD/DVDW TC-L6#2D" in device manager. I've searched around for a driver, but can't find an exact match for that drive and there's no optical drive drivers on this Toshiba site driver section. The only thing I've found is an executable file for upgrading the firmware, but it throws an error saying it's the wrong drive.
Anyone got any ideas?
Any help would be greatly appreciated!

Hi
Toshiba European driver page provides three different firmware updates for Satellite A200 PSAEC series:
TO02 for CD/DVD drive TS-L632
TO02 - for CD/DVD drive TS-L632P
(This firmware solves some problems of the optical disc drive.)
TO03 - for CD/DVD drive TS-L632H
(This firmware solves some problems of the optical disc drive.)
Im not quite sure what TO0$ means but I think the sign $ is only a free variable parameter (place marker).
If you want to check your current firmware then you could check it using the Nero Info Tool
http://www.nero.com/enu/support-nero8-tools-utilities.html

Need driver for Nvidia Geforce Go 6150 for Windows 7

Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html
And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way?
Well, here is a part of what the tutorial says (what was enough for me):
-Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
-First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
-Download and install the following:
NVIDIA nForce Chipset Driver
ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
and see if the coprocessor is recognized.
-If not, go to the Device Administrator and find the unrecognized coprocessor.
-Right-click on it and select Update driver...
-Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
-Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
-Now, the coprocessor should be recognized (check the Device Manager).
Hope it helps!
Pixzeto
(PD: HP, the graphical editor on this forum sucks on Opera 10.01)

Satellite A200-19L - TV-OUT not working

I have Satellite A200-19L (PSAEC) with nVidia *GeForce Go 7300.
The laptop came with Windows Vista Home. I downgraded the system to Windows XP
Professional with SP2.
Everything its ok except the fact that now I cannot connect the computer with my TV (I used to connect with _RGB-RGB_ cable, my TV has RGB slot, TV is a Samsung LCD). With Vista it was very easy to connect but now I cannot. And now I have this problem. I cannot to do this connection.
I installed the forceware 156.55 and my driver version is 6.14.11.5655.
If anyone knows how I can do this connection please reply.
It will be _helpful._

Hi
Im not 100% sure if my advice will help you to solve this issue but generally you should update the BIOS to the XP version if you want to use the XP on this Vista unit.
Furthermore you should install all Toshiba drivers in the right order
Then you should be able to use the FN+F5 button combination which helps to switch to the external display device like second monitor or TV.
Bye

Satellite A200 - Display goes off for no reason

I've a Satellite A200-E530D running Windows Vista Home Premium. For the past month, i've had something strange happening to my computer, soon after boot up, the display goes off. for no good reason! the only option i have is to hard boot the system and everythings fine...though a couple of times after restarting it again went off.
I've tried updating to the latest display drivers (I have a Nvidia Geforce 7300 Go graphics with a 128 MB of VRAM)
Another strange thing, Vista SP1 doesn't install on my machine. tried uninstalling my Anti virus, but that hasnt helped either.
Can anybody shed some light on my dark display?

im hoping its not a failing inverter board. hardware support where i come from (India) costs a bomb, and for a laptop, its a hell of a lot more than a bomb.
i dont think its a failing inverter board though...shouldnt the board fail regularly while im using it then? the fact that my display switches off (and dude, it switches OFF completely, no backlight at all. my laptop responds only to a hard boot in the @$$) right after i switch on my computer points to a software malfunction. because, afterwards, my PC works just fine for the the next seven or eight hours that i use it for.
im guessing there something wrong with the way the drivers are loading up...or something.
maybe i should change the power options? i've configured the screen to switch off after a period of 1 min of no activity. and my laptops start up time (from the time i log in, to the time the little windows hourglass sign disappears) can be a little longer than a minute. is it possible that theres something wrong going on there?
like i said, im at my wits' end!

Update drivers for NVIDIA GeForce GT 330M

Need the updated drivers for NVIDIA® GeForce® GT 330M that comes with my Vaio Z VPCZ128GX , the drivers in eSupport are from 2010, and nVidia software does not detect the 330M card
VPCZ125GX

I've updated my VPCZ1 to 340.43 drivers but it still won't accept the transition to Windows 10, seems like they just want to find any excuse to back out of their promise of a free upgrade for windows 7 users. For anyone who is editing .inf files and still not able to get it to work, you need to update your intel drivers first. The process is a bit awkward, I tried to update the Geforce with a few pre-modded drivers, using the device manager. It would always freeze during installation or ask to reboot and start in 800x600 resolution. I also tried the latest intel drivers but was unable to update them at the time, so I gave up on the idea for a while. Later, I ran into trouble running GTAV, the game would start fine but suddenly crash to desktop while loading. I remembered how the latest driver broke the intel driver, so I rebooted with the laptop in "stamina", installed the latest compatible onboard graphics driver and rebooted in "speed" mode, which incapacitated the 2010 nvidia driver so I had a new "unknown device" under "display adapters" in the device manager. I pointed it to the 340.43 drivers (latest driver I could find for 330m which still uses inf files) which I modified earlier and success, GTAV now runs. Editing inf files is surprisingly simple, just find mention of "330m" in one of the inf files (which are lists of subsys numbers) and replace the subsys number with the one from your card in device manager when using the 2010 drivers. (there are alraedy a lot of them in the inf, I guess it's true that no two 330m are the same) I've always left it on "speed", ever since it booted with the new drivers, The GPU is easily underclockable using Precision X for more battery life. http://i59.tinypic.com/swd3lx.jpg Only side effect I know so far is that the screen rotation doesn't work, although I never tried it with the old driver combo.

Satellite A200-19l driver XP for Nvidia GeForce 7300 not working at all

Similar Messages

Maybe you are looking for