Satellite A200-19L - TV-OUT not working

I have Satellite A200-19L (PSAEC) with nVidia *GeForce Go 7300.
The laptop came with Windows Vista Home. I downgraded the system to Windows XP
Professional with SP2.
Everything its ok except the fact that now I cannot connect the computer with my TV (I used to connect with _RGB-RGB_ cable, my TV has RGB slot, TV is a Samsung LCD). With Vista it was very easy to connect but now I cannot. And now I have this problem. I cannot to do this connection.
I installed the forceware 156.55 and my driver version is 6.14.11.5655.
If anyone knows how I can do this connection please reply.
It will be _helpful._

Hi
Im not 100% sure if my advice will help you to solve this issue but generally you should update the BIOS to the XP version if you want to use the XP on this Vista unit.
Furthermore you should install all Toshiba drivers in the right order
Then you should be able to use the FN+F5 button combination which helps to switch to the external display device like second monitor or TV.
Bye

Similar Messages

  • Satellite A200 - Headphones and microphone not working (Win XP)

    I have fully operational Windows XP with everything working just fine. However, today I tried to connect a microphone to the notebook, the software noticed it, muted the internal speakers, but there is no sound in the headphones whatever I do. I tried if the microphone jack is all right only to find out that I have the same problem - the realtek software notices me, that I plugged in a microphone, but doesnt record any sound.
    I would be more than grateful for any help.

    Are you sure that you have checked all necessary sound settings?
    Im not Satellite A200 owner but Ive got a similar Satellite A series and I have installed both OS (Vista & XP) on my HDD.
    From my knowledge you have to check different microphone settings in the sound & audio options.
    In Control Panel you will find the Sound & audio devices. Choose it!
    Then choose the tab called Audio.
    There you could find the area Sound recording which provides information about possible devices for sound recording.
    First of all you should check if the Volume settings are set to a higher level.
    Secondly check if a right device was chosen (in my case its a Realtek HD audio input).
    In the other tab Voice (near audio tab) you can test the voice recording too. This could be very helpful to check if the mic functions correctly
    Please do this!
    Bye

  • Satellite A200 - FN keys are not working

    I have Satellite A200-1N2.
    I setup fresh Vista ultimate 32bit because the last owner lost the device driver and all related disc to this laptop
    So, i download all utility and driver from Toshiba site and install them i install and cofigure the toshiba Assist but i can't use volume key with Fn key and other too.
    Please advice me
    Thanks before

    Hello Mona
    It is not easy to say what is wrong there but to have well working OS with all Toshiba tools and utilities it is important to install all stuff following the right installations order. Please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Downloads and choose your notebook model PSAE3E and check Installations Instructions document.
    Just install all listed stuff (available on download page) following exact installations order.
    After doing this everything should work well.
    Just one question: what do you mean with volume key with Fn? Do you mean MUTE option with FN+ESC?

  • Satellite A200-PSAE6E - FN key not working on Vista 32bit

    Hi all
    I can't get the FN key to work, no matter how many times I reinstall Toshiba software, it just doesn't seem to work!
    Anyone got a workaround?
    I'm using Bios 2.40, and Vista 32bit

    Hi
    If you installed your OS manually the right installation order is necessary to get all Toshiba tools and notebook features working.
    Please follow the installation instruction which can be found in the installation instruction txt file.
    On the Toshiba European driver page you will find also the *Flash Card Support Utility 1.49.0.2C*. It is needed to use the Toshiba Flash Cards (FN + F* Keys).
    Additionally the VAP must be installed too
    Regards

  • Satellite A200-1AX function key not working

    Hey all
    i installed XP a few weeks back and updated the bios to the xp version
    I didn't like it and i went back to vista but now my function doesn't work.
    I press it and press the screen brightness key but the controls don't show up anymore and i have to manually use it with my mouse or through the mobility center
    is it because of the bios? I downloaded the new vista bios and now it says that rom space is full and quits
    What do i do? Help much appreciated

    Hi
    The problem is that you need to update the BIOS to the XP version if you want to use all the notebook features on this notebook.
    After the installation of XP you have to update the BISO XP and then you have to install all the available Toshiba XP drivers and utilities.
    This should helps.

  • Soundblaster X-Fi Titanium Optical Out not working???

    Hey friends,
    I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
    I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
    ?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
    I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
    I am using the following drivers
    Driver: v2.7.008 Windows 7 64bit
    DTS Connect: for Windows 7 64bit
    Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
    I would really appreciate any advice
    Thanks in advance
    KiloHurtz

    Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
    Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
    And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
    I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
    Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

  • Tv out not working on ios 8? please tell me what is problem?

    When i update my iPhone 4s to iOS 8.1 tv out not working .     Help mee plzz

    If those numers are ordered correctly it sounds like you are using a faulty charger with your iPhone.  It should charge faster with the charger than a USB port as the charger supplies a higher current.  Different batteries are going to charge differently based in part on differences in the ways they have been used.
    Try using your friends charger with your iPhone and see how long it takes to charge compared with your charger.

  • Satellite L300 (PSLB8C-0H901X) does not work

    My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no POST, nothing, Get power and charge lamp when pluged in nothing else, any known issues? Any fixes, Thanks in advance for your help.

    Hmm sounds like a serious hardware issue.
    If you are a lucky man the issue could be related to RAM module.
    The RAM modules can be replaced easily. The memory bay is placed at the bottom of the unit secured by one screw.
    But the question is if its really related to RAM.
    Well, you will know this if you would replace/check this
    Otherwise I recommend asking an professional notebook technician for a help

  • Satellite A200-19l driver XP for Nvidia GeForce 7300 not working at all

    After downgrading from Vista to XP, my A200-19l doesnt find the Hardware to the GeForce 7300... no driver working, wether Display- or new Forceware drivers from Nvidia homepage. The Hardware Manager still shows a ? for the "Video
    controller".... the Geforce 7300 isnt shown at all as Hardware...
    what can I do... thanx for any help!

    Hi
    Its very simple. You need an compatible graphic driver!!!
    Did you already check the drivers from these pages?:
    www.omegadrivers.net
    www.laptopvideo2go.com
    Anyway, the graphic driver from the nVidia page should works also!!!
    You have to install the driver in the device manger. Dont install it automatically but force the driver installation.
    You have to choose Install from a list or specific location (advanced) and then Dont search. I will choose the driver to install.
    Thats all!!

  • After Recovery with CD Satellite C660-1FE keyboard does NOT work

    Hello,
    A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
    Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
    The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
    I have:
    tried finding and installing lots of drivers on from the toshiba website, no result.
    tried changing settings in the bios (usb enable/disable).
    tried to fix the problem by re-installing the entire computer again several times.
    The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
    Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
    +The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
    +You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
    Can someone please give me some help? I am at the end of my wits.
    Sincerely,
    Daniel

    Hi MisterX,
    thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
    I wrote the following e-mail to [email protected]:
    +Dear Toshiba,+
    +after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
    +My laptop: Satellite C660-1FE+
    +serial: 5B378048K+
    +Part-nr: PSC0LE 02M0TU26DU+
    +Recovery CD's I received are CD's 1-3 with serial R14254DU+
    +Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
    +This would be greatly appreciated,+
    +Daniel+
    MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
    Kind regards,
    Daniel

  • Satellite L300-190 - wireless is not working in Ubuntu 8.10

    Hi,
    I have recently bought this machine Toshiba Satellite L300-190 (PSLB8E-014008N5).
    First I tried to install Ubuntu 7.x but that did not work due to some graphic card issue. Then I try the new version Ubuntu 8.10 , everything is working fine, except of wireless. There is no wireless detection in it.
    I tried through Ubuntu forum, but still no luck. Please help me out if u can provide me some proper driver or can guide me as well.
    I am waiting for your response.
    Ali

    Fianally Wireless list have got by using the following driver and instructions for the the laptop Toshiba satellite L300-190...
    http://wireless.kernel.org/en/users/Download
    as I am using ubuntu 8.10 , so i installed compact driver supported for 2.6.27.
    and just untar it...
    1.make
    2. sudo make install
    3. sudo make unload
    4. sudo make load.
    and restart ur PC, and thats all, hopefully for the next start u can see the wireless connections

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Keyboard Satellite 3000-214 - Ctrl-key not working

    Hi,
    I've started my old Satellite 3000-214 Notebook and suddenly my Ctrl-key did not work anymore.
    I've already tried to clean the keyboard by unmounting all keys from it and cleaning the foils, without success.
    Can anyone tell me where I can get a suitable keyboard from (I live in germany)?
    Does it has to be an original Toshiba keyboard or can it be from an other manufacturer?
    How can I remove the keyboard from the laptop? Do I have to open the case or is it possible to get it out with a screwdriver or something?
    Thx for any hint!
    Best regards.
    Ting

    Hi
    You should use the original Toshiba keyboard which is supported and compatible with this notebook.
    All parts and devices you can purchase from the Toshiba authorized service partner in your country. The full database with worldwide ASP you can find on the Toshiba European support page.
    Usually if you want to remove the keyboard you have to remove firstly the thin cover above the keyboard.
    There you will find two screws which secure the keyboard. After removing of these two screws you will be able to put out the keyboard.
    But be careful; the keyboard is connected with the flat cable to the motherboard.

  • Satellite A200/W00 - Fingerprint Scanner not being recognised by software

    Hi.
    I'm running a Satellite A200/W00 Toshiba laptop (PSAF6A-0W00IN), and I just recently installed my brand new Windows 7 Professional that I just bought.
    I found the Windows 7 Drivers for my laptop on the website and installed the Protector Suite QL 5.8.0.4024, and it installed just fine.
    Once I restart my computer after installing, on the login screen where the fingerprint scanner button is to log in it says 'Cannot read scanning device', or something along those lines.
    When I log in there is another pop-up with the program on the task bar stating the same thing, that my fingerprint scanning device needs to be plugged in. It's built into the laptop, it shouldn't need 'plugging in'.
    I tried uninstalling the drivers for my Biometric device, and then on scanning for hardware changes it immediately detected my Fingerprint scanner again and reinstalled the drivers from it.
    So, my Fingerprint scanner is clearly working, but Protector Suite QL isn't detecting it. I don't understand why.
    Anyone discovered this problem or know how to fix it? I can't exactly check the state of my scanner as it is built into my laptop.

    I'm not sure what the TrueSuite Access Manager you mentioned is. If that is the program that you use for managing your fingerprints/logging in with fingerprint reader, then that is a different program than what I had come with my laptop.
    The program that came with my laptop for managing fingerprints and the reader is UPEK Protector Suite QL, and it used to work perfectly fine on Win7 RC and Vista Home Premium.
    I can't register my fingerprints at all as the program that is supposed to do it isn't finding my fingerprint reader. Logging in with the fingerprint reader is an option at the moment at the login screen, but as mentioned it says that it cannot find the reader.
    I have 'Fingerprint Login' selected in the settings with 'Allow to bypass logon using Windows password' and 'Allow user selfenroll in login', and other settings are set to 'Convenient' mode.
    I've taken a screenshot of the exact popup that comes up whenever I try to access the Fingerprint reader to register/check storage, and have uploaded it. Here is a link: [http://img94.imageshack.us/img94/4880/fingerprinterror.jpg]

  • Satellite P750 - Wireless card is not working

    PSAY3A-02q001. Laptop is about 20 months old. Turned it on this afternoon and the wireless is not working. Atheros AR9002WB-1NG. Cannot b switched on and off from the hardware switch. The switch beeps when pushed. Network troubleshooter indicates card is not turned on. Card is still detected in windows.
    I am feeling that this indicates the card has failed. Any thoughts?
    cheers Simon

    Ok just to tidy this up
    The Atheros OEM wireless lan and the bluetooth were both working.
    They stopped but I could still see the card in device manager.
    Thinking the card was faulty and wanting to upgrade to a better wireless card I purchased an Intel 6235. i had the same problem i.e. the card would not turn on. I reinstalled the Toshiba value added package which then returned functionality to the hotkeys to turn the wireless on and off.
    Next problem i was unable to get the bluetooth on the intel card to work.
    There is a long thread on this on the intel community forum with the bottom line being a lot of people can't get it to work on their laptops.
    I removed the intel card and reinstalled the OEM atheros card which is now working except i can't get the bluetooth to function correctly.
    The intel bluetooth software is virtually uninstallable.
    This is also covered in the same community forum.
    The next step will be reinstalling the OS (windows 7 x64). It has been running for 2 years so is probably due.
    Learnings.
    1> If your wireless card stops working in the P750 and you can't turn it on reinstall the Toshiba Value added package.
    2> Don't install an Intel Centrino 6235 wireless card in your Satellite P750. The bluetooth will not work.
    3> Don't install the Intel Proset bluetooth software on your Satellite P750. It wraps itself around everything and can't be uninstalled. Actually you can get it out manually
    [6235 thread|http://communities.intel.com/thread/31247]
    cheers Simon

Maybe you are looking for