Satellite A200-1GB PSAE6 Flashcards issue - serial number is invalid

Hi all.
I need help and something for my headache... :D
Today I were looking to the updates zone and see a newer version for the Flashcard, so I donwloaded it and install, but now begin the problems...
when the setup starts it says that must uninstall the older version,so ok I accept, then restart and exec the flashcards setup again, but now I get "The serial number is invalid" error. I come here looking for a solution and read that I must reinstall the VAP (I had installed the vap-20080109135106 version).
Before the error windows comes up, a DOS window opens and closes automatically with this line command message : "connected to ROOT\CIMV2 namespace", then the error comes :S
So again I uninstall the VAP, restart, clean with ccleaner, restart, install the VAP again, restart, install the newer Flashcards and....surprise....again the same error.... The serial number is invalid
I tried again all the steps and get the error another time more.
For the third try I just install the VAP and saw that the included flashcards were installed and working....but not so easy.... they don't works when pressing the FN+Fx combination only work if I move the mouse over them...... exactly the only combinations working are the FN+F10 & FN+F11.
The FN key works, because as I told before two combinations works and the green light when pressing it blinks ok.
So now I have a flashcards VAP ones (not the last update) that only works with mouse or touchpad click. If i press FN+something nothing happens (except the F10 F11).
Whats goin here?? I'm really frustated of this happen.
PS: I'm totally sure that the updates version are the right formy notebook model........
I also tried to install olders version of flashcards and VAP that I had on a backup drivers cd and nothing happens, the same situation and erros..... (fcsu-20080307104403 & fcsu-20070809135810)
Please I need something :D

Try installing the Flash Card Support Utility from the Canadian Toshiba site.
Follow these thread for more info:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=31711&tstart=0
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=100197
The second one really helped me solve the exact same problem i was having.
Good Luck.

Similar Messages

Does Satellite A200-1GB(PSAE6E) supports 4GB of RAM

I have a toshiba Satellite A200-1GB and I want to put 4GB of RAM on it.
It came with 2GB of pc2-5300 RAM.
Does it supports pc2-6400 RAM modules?
Regards

I called Toshiba about this after I bought a Satellite A205 with 2GB factory installed. The salesman where I bought it told me that if I boosted the RAM to 4GB it would run Photoshop even with Vista. yeah right. Vista soaks almost up a full GB just sunning its self. I literally bought this unit on the way to the airport leaving for China with the extra 2x2GB chips in a bag. Needless to say after I installed the 4GB it won't start.
The Toshiba guys tell me that it is limited not by the OS but by the Motherboard.
Has anyone tried changing the BIOS chip?
When I asked why they would put such a limitation on the box they thought I was strange to want 4GB of RAM. Telling me that it isn't really considered the way to go for PSing. I guess they have never heard of Gamming. Or maybe they think someone would want to go bouncing around the 3rd world with a $3000 box to be lost.

Acrobat 9.0 licensing issue - "serial number is invalid"

I bought a copy of Acrobat 9.0 standard. Installed it on my desktop PC (no issues). But when I installed it on my laptop, I got an error that I exceeded my number of licenses. After talking to Adobe (twice), with them telling me that they had increased my number of installs, I now get an error on the laptop that my serial number is invalid.
Adobe tells me that the copy I bought was an OEM version, and they can't help me.
Any thoughts on how I get two installs with this software? Or am I stuck with just one install on my desktop? (Is that one going to start getting "invalid serial number" messages too?
Thanks!
- I am using Windows 7 operating system (both desktop and laptop).
- I purchased this software online from someone (not Adobe).

I don't think I helped, just gave you some bad news. OEM versions are sold for use on the distributed computer only. It may be that you can also install on a second computer with the disks provided. Anyway, good luck. I would suggest trying to check the SN on the one you have installed.

Satellite A200-1GB ( PSAE6E) Can't find drivers for Win 7

Help me guys :( I can't find any drivers for windows 7 :S
where i can found the drivers ?!

Hi mate
Akuma is right. Since Win 7 is not finally released, you will not find the Win 7 drivers.
But as mentioned the Toshiba US page provides some Beta Win 7 drivers for different notebook series its worth a try
Furthermore you could try to install the Vista drivers using Win 7 OS.
Usually the Vista drivers (but not all) should be compatible with Win 7.
Cheers

Satellite A200-2BH PSAE6E: Cannot install Flash Cards Support Utility - serial number is invalid

Hi
first sorry for my bad English.
Second I have a Toshiba notebook Satellite A200-2BH PSAE6E I changeg my OS to Vista and I have a problem with "Flash Cards Support Utility". I can't install it.
I have this message error "the serial number is invalid" I don't know what to do.
Thanks for your help

Hmm did you follow the installation instruction placed on the Toshiba driver page?
There installation order is important.
WINDOWS VISTA
No. Component Name Version
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221

Satellite A200-1FL: Bluetooth installation issue on Win 7

Hi everyone,
I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I've just installed Windows 7 32 bits (not update nor upgrade).
The problem is that when I try to install bluetooth stack, it installs everything ok but the driver.
I picked version 7.10.12 for Windows 7 32 bits from http://aps2.toshiba-tro.de/bluetooth/?page=download.
The driver installation window shows up and the progress bar doesn't move.
I've waited for a long time and nothing, no response, so I have to cancel.
Nevertheless the software was installed and when I try to start Bluetooth config or any other tool, the same happens: The driver installation window shows up and nothing.
Also I tried to follow order install instructions from toshiba download drivers page guessing which drivers match each options.
May anyone know why is this happening?
Am I missing something or is there any known issue with the Bluetooth driver in Windows 7?
Thanks in advance,
Jorge

The situation happens to me even when the wifi is on. The default SO of my laptop was Windows Vista. I formatted everything but the recovering partition and installed Windows 7. Almost all the drivers and software available at the Toshiba drivers page for Windows 7 seem to work fine. Even some of the drivers mented to Windows Vista
Anyone has any other idea? I discarded hardware because the wifi works fine and the driver installer is capable of detecting when the device is on or off.

Sat A200-1AE: Toshiba Hardware Utility - "the serial number is invalid"

Dear Sirs,
I install Vista Business to my A200-1AE (originaly it was Home Primium). I install all drivers exept TOSHIBA Hardware Setup Utility . Then i try to install it is says "the serial number is invalid"
Can some one help how to install it and what can be a problem?

What I did - I walk thru the original drivers that were added on the cd with Home Vista.
I found out that Toshiba Hardware Utility version is 1.48.0.8c, it is not the same as it is on a download drivers presented by toshiba for downloading v.1.48.0.9c.
1.48.0.9c - this is the version wich didnt want to be instaled -"Serial number is incorrect". So i found it in the net and install 1.48.0.8c
Plus it was mentioned that all drivers from the beginning have to be installed in order - given by toshiba, but by number 8 it was mentioned *TI Multiple Digital Media card Reader* - only after Jeffrey msg i found out that it is the same ->Flash Media Driver - the one i was installing right after Flash card Support utility - since i coudnt figure out what they mean by T*I Multiple Digital Media card Reader*.
I tryed it on my girlfriend notebook and it worked.
Right now I will try it on my Notebook - after usefull help by you Jimi regarding incorrect ROM size i will try it and let you knoiw if it worked.
I just dont understand why it is important to install drivers in the strick order + different versions appears.
One more thing, I have a problem with Robson Package - it is all the time against me -no instalation :-( but it is appears with the rest of drivers presented by toshiba for my model.

Satellite A200-2BH PSAE6E - Where to find drivers for Vista

Hi evrerybody
I have a toshiba Satellite A200-2BH PSAE6E-0HE049FR and i want to download drivers for windows vista.
Problem: i didn't find it in the download page :s
Can any one helpe me ??
I have an othere question how can i upgrade my vista to windows 7??
thanks

Hey,
I did take a picture where you can find the drivers:
http://img407.imageshack.us/i/a200drivers.jpg/
> I have an othere question how can i upgrade my vista to windows 7??
Why it shouldnt be possible?! ;)
But before you do this you should check if you can get all drivers for it.

Require BIOS 1.8 for Satellite A200-13M (PSAE6) - Fan activity

Hi y'all,
I recently updated my Satellite A200-13M (PSAE6) with bios 2.20-Win Vista.
I am experiencing a higher fan activity and as a consequence, a lot more noise!
The fan now activates at 47-48C wich is lower than previously (~50C)!
I would like to downgrade to the previous bios version which turned out to be smoother!
Could anyone help me get the 1.8-Win vista version.
What are the key changes from v1.8 to v2.2 except the more agressive fan control?
Kind regards.
Maxime

Hi Maxime
In my opinion the cooling modules run stronger and faster to prevent the internal hardware i.e. GPU and CPU from overheating.
For me it looks like the fan table which is stored in the BIOS was updated and therefore the fans rotate faster due to the reason mentioned above
The Toshiba driver page offers only the newest BIOS updates the older BIOS versions are not available on the website and I think you needed to contact your local ASP to get an earlier BIOS.
Unfortunately, I dont see any other possibilities to get an older, different BISO version for you notebook series.
Greets

Old school with CS2. Haven't used in a while and am unable to use the program as it says my serial number is invalid. Customer service tells me the server for CS2 has been shut down. Then they sent me here for help. Does anyone have any advice?

I don't have a clue what I am doing with this. Here is my discussion with Customer Service:
Naresh: Hello! Welcome to Adobe Customer Service.
Naresh: Hi Mary.
Naresh: I understand you have been getting invalid serial number, am I right?
Mary Vance: Hi
Mary Vance: yes
Naresh: Please provide me with the serial number, Mary.
Mary Vance: I provided my serial number here
Naresh: Thank you for the serial number.
Naresh: Please allow me 2-3 minutes while I check your serial number.
Mary Vance: no problem
Naresh: Thank you.
Naresh: Thank you for being online.
Naresh: I would like to inform you that the server for CS2 products have been shut down by adobe since then you are not able to install the product.
Naresh: However, I will provide you the link to download CS2 application. Please visit the following link.
Mary Vance: will this allow me to reinstall Photoshop?
Naresh: Yes, Mary.
Mary Vance: ok...what is that link?
Naresh: Please clcik here to download.
Mary Vance: thank you....trying it now
Naresh: You are welcome.
Naresh: I will also provide you the link for further information regarding the installation of CS2 products.
Mary Vance: the download doesn't have anything regarding installation
Naresh: Please click for the information.
Naresh: I am sorry for providing wrong link.
Naresh: Please click here to download.
Naresh: The 3rd link is for the download of CS2 Photoshop.
Naresh: Were you able to view the download link, Mary?
Mary Vance: what file in that download is supposed to help me?
Mary Vance: the first and 3rd link were the same
Mary Vance: when trying to load from my software, I get the message saying my serial number is not valid. All I need is a serial number that works. Is that going to be possible?
Naresh: Mary, Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
Naresh: So you will have to download the software from the above link.
Naresh: May I know in what OS you are trying to install the software?
Mary Vance: the link sends me to a CS2 help package
Mary Vance: windows 7
Naresh: I am sorry you will not be able to install the CS2 application on Windows 7 since it does not support CS2 version.
Mary Vance: I have had on here for a few years...why all of a sudden would it not work? Illustrator is fine.
Naresh: Okay.
Naresh: You can try downloading the software.
Mary Vance: was the original link that you sent me suppose to allow me to download Photoshop?
Mary Vance: I did try and got the message that the serial number is invalid. Is there any way to get around this or should I throw it away?
Naresh: May I know whether you uninstalled the product.
Naresh: ?
Mary Vance: I did uninstall Photoshop only. Then I tried reinstalling Photoshop only and got the message about the serial number.
Naresh: I check and see that it seems to be a technical issue, I request you to please post your query to the forums so that you will get the resolution from our expertise and I'll provide you the link to visit the forums.
Naresh: Please click here to visit the forums.
Mary Vance: I guess I will try that.
Naresh: Yes, please.
Naresh: Is there anything else I can help you with?
Mary Vance: I don't see where you helped me with this yet, so I guess not!
Naresh: I am sorry for the inconvenience.
Naresh: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Any help would be appreciated.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

jessicar
Just user to user....based on past and current history, Adobe Tech Support is not going to help you with a technical issue which is preventing you from using your purchased serial number for Photoshop Elements. Version 12 is not the current version. And, the Adobe Tech Support is limited even for the current version which is 13. If this matter involves a purchased activated serial number trapped on a crashed computer while you are trying to install on a 3rd computer, then probably Adobe Chat Activation can be of assistance. If that is the case and you want to explore that possibility, then click on the following link
Contact Customer Care
Photoshop Elements
Adobe ID, Signing In
Adobe ID, Sign In, Account Help
Chat Panel
If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Are you getting one of those "too many computers with your serial number" messages? Then the above should apply to your situation.
Before the above consider....
a. For Photoshop Elements technical issues please post your question in the Adobe Photoshop Elements Forum. Somehow your
question got posted in the Adobe Premiere Elements Forum.
b. Have you verified your Photoshop Elements serial number at the Adobe web site (http://www.adobe.com) - after signing in with your
Adobe ID and Password, type My Products in the Search field and follow the path to your product in My Products. Click on Adobe
Photoshop Elements 12 in your list to reveal the serial number.
c. Do the install with antivirus and firewall(s) disabled.
ATR

Serial number is invalid for Adobe Acrobat Pro 9 within CS4

Hi,
I purchased Adobe CS4 Creative Suite Design Standard. Upon installing the four programs it contains (InDesign, Illustrator, Photoshop and Adobe Acrobat Pro) I keyed in the serial number and InDesign, Illustrator and Photoshop worked fine, but Adobe Acrobat Pro 9 kept showing a red 'X' at the end of the serial key input, saying my "serial number was invalid".
1. Incorrect tech support advice #1: Adobe tech told me to de-install and re-install from Adobe purchase e-mail link only instead of from trial versions. I did this, and then none of the programs worked or accepted the serial number. I went back to trial versions, and again 3 out of the 4 programs took the serial number - all EXCEPT Acrobat.
2. Incorrect tech support advice #2: Opened a case # online and waited a week for some kind of help, but once again got on the phone. This time I was told that the key was to select "Universal English" as the main option. Again I de-installed Acrobat and re-installed. There were no options for "universal English" ( you have to choose between English, Francais and Deutsch). Only when I got to the End User License Agreement was there an option to choose "English (International)". So I did as advised. Once again I entered my serial number and got a big red 'X'. I'm at the end of my Adobe rope.....
Does anyone have any idea how to solve this issue?
Thanks.

oh man, i think i am having a bigger problem now. I tried to uninstall the whole CS4 suite and was prompt to enter my serial key, to my horror, the big red cross appears. Making my serial key invalid for the whole suite. What is going on man. I think this really screw up my system, i am using vista 64. I am going to reformat my computer and try to reinstall, but i did not deactivate. Will this cause my just bought CS4 useless???? I am starting to get worried.

Where I try to install Adobe pro 9 I receive a message my serial number is invalid

I have an Adobe Pro 9 serial number. However when i try to install a full version of the software my serial number is invalid. I have checked with the agents in the Chat support and they told me to post my issue here. The Chat support agent told me that the serial number i'm having is a volume license. Please advise.

Hi Farid.zulkifli,
Welcome to Adobe Forum,
If the upgrade serial number is of Retail version & the previous qualifying serial number is of volume, then it is an incorrect upgrade path.
You will need to contact Adobe Support http://adobe.ly/yxj0t6 & get approval for re-serialization only when you have valid proof of purchase as per company guide lines. The discretion to re-serialize depends on the proof of purchase & concerned Team for approval.
Regards,
Rajshree

CS6 serial number now invalid?

I bought CS6 student and teacher edition a while ago. I had all sorts of problems with the initialization. I installed one version on my macbook pro and one version on my macbook air as I work from home on one and travel with the other. About 1 month ago my illustrator, in design and photoshop ceased to open. I get an error message saying that my serial number is invalid, and already used on a maximum of two machines, that I need a new serial number. I have only ever had the program installed on two machines. I tried to install it on my old macbook pro but it was too old to take the newer version of the software so I couldn't even install it, let alone activate it. (The new macbook pro was a replacement).
I have no idea what to do. Other than uninstall and reinstall all the programs which is a complete pain.
With all the issues I had just getting the software this is the last thing I need

contact adobe support to check/reset your activation count: http://www.adobe.com/support/chat/ivrchat.html

Photoshop serial number is invalid

I have a problem with photoshop inside my creative standard suite edition for students, all the rest, such as indesign and illustrator works fine, but photoshop says that the serial number is invalid. The strange thing is that all the rest of the suite in si english and phptoshop in italian, what do i do? If i disinstall photoshop and reinstall in english will my serial number go? i have a big deadline next week and i really need photoshop and i would like to know what do i have to do.

Yes, it is a valid serial number, it's the one on my packaging. It was on my PC laptop no issues, the laptop died, I'm installing on a new one it says invalid key. I didn't get a change to unregister the other PC, maybe that is the issue, but adobe says that my key is a beta key and they won't help me, they say I have to buy full version, but I had full version. I feel ripped off, thanks again for all your help!

Satellite A200-1GB PSAE6 Flashcards issue - serial number is invalid

Similar Messages

Maybe you are looking for