Satellite A200-1M8 PAE6E: CD/DVD drive issue - power calibration error

Hi,
I have an Satellite A200-1M8 ( or A200 PAE6E ) with Vista and for some time I've been trying to burn some dvds which I failed due to power calibration error.
I tested my DVD-ROM and it works normally, the problem is it does not read (recognise) every dvd.
Is there anyone who can help me out about this?
Or how can I learn which type of media my DVD-ROM would read?
Thanks in advance.

Hi
I think I have founded an interesting article for you:
[Is there a list of supported type of CD-R/-RW or DVD-R/+R/-RW/+RW/-RAM discs which should be used?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=36]
But generally a power calibration error means that its the media is faulty or not compatible with the drive.

Similar Messages

Satellite A100-785 PSAANE - CD/DVD drive issue

Hello Friends,
I own a Toshiba Satellite A100-785 PSAANE and its configurations are as follows:
1.87 Ghz C2D, 1 Gb Ram (512 + 512), Windows Vista Basic, CD/DVD read/write...
Issue: Its been quite long, i m facing a certain problem with my Optical Drive. When ever I insert an CD which is originally produced by any company it works fine. The moment I insert any CD which is personally burned with some data from any normal CD/ DVD writer or the CDs which were previously created by the same laptop mentioned above, its been read as a blank disc. The data of the disk is not shown.
For eg: Lets say if I insert any software cd like my webcam's cd or my printer's cd they can be read normally and work fine. But the moment I enter any cd which is been burned by me which contains my personal files, that is been read as a blank disc.
This issue does not exists with any of the DVDs. Doesn't matter which every dvd I insert either being a normal software dvd or being the one which is burned as a personal data dvd, everything works fine and all the data in dvd can be read.
I have tried reinstalling the driver, I have tried reformatting my laptop using the Toshiba Recovery CD provided with the laptop, but the issue still exists.
In between few months ago, I tried doing some tweak, like first i insert the cd in the drive and then disable the cd drive and then enabling it again would actually read the cd. But after few tries, this also stopped working.
Now I really have no idea what should I do to make my CDs work normally.
I hope this post can help me out.
Your help will be appreciated
Thanks for your precious time
Regards
Jeetendra

>Issue: Its been quite long, i m facing a certain problem with my Optical Drive. When ever I insert an CD which is originally produced by any company it works fine. The moment I insert any CD which is personally burned with some data from any normal CD/ DVD writer or the CDs which were previously created by the same laptop mentioned above, its been read as a blank disc. The data of the disk is not shown
For me it sounds like a DVD, where the data has been burned, were not fully compatible.
I meet such issue on different computers. A friend of mine has had the similar problem with an non Toshiba notebook. Its matter of the disks which are used for burning.
I tested several brands and now Im using TDK and Verbatim because my CD/DVD drive supports these kind of disk properly.
Of course it could be an hardware issue too but in such case you will need to replace the CD/DVD drive

Satellite A200-195: What CD/DVD drive is compatible?

Hey Guys and gals,
I have had a look and asked Toshiba but no answer given so thought I would ask the experts here.
My DVD RW in my laptop TS L632D Has died and I need a new one.
So what one can I buy and fit without problems.
These drives are known to have issues with conflicts etc... so a different drive would be better.
So what do you guys and gals suggest.
Cheers,
Chris

Hi
Thank you very much that you are seeing us as experts :)
We all here are Toshiba notebook users and as you probably dont know this is a user-to-user forum. :) so maybe not really experts ;)
To be honest its not known to me that this CD/DVD drive causes issue.
As you probably dont know every CD/DVD drive doesnt support all possible CDs or DVDs from different manufacturers.
Some CDs and DVDs are more compatible and some CDs or DVDs are not fully compatible.
However, the point is that you need a new CD/DVD drive.
I checked the A200 user manual (can be downloaded from the Toshiba page) and there is a list with some compatible drives.
Check the user manual page 6 and 7
You can also call the ASP in your country. The guys known what CD/DVD drives are compatible with your notebook!
Bye

Satellite A200-1M8 - Can I get a Windows 7 upgrade disk?

Hey there, regarding Windows 7.
I have purchased my laptop model which is Toshiba Satellite A200-1M8 in year 2007.
I want to know first:
If i'm able to upgrade it for free or for money according to Windows Vista to Windows 7 upgrade thing you offer, if yes to which Version of windows 7 it will be upgraded (Home, Professional, etc..)
If not, can I order Toshiba to make a Recovery DVD for Windows 7 specially for my laptop version and if yes, to which version of Windows 7 will toshiba give me?
Regards.

Hi
All informations that you want to know you can find on the Windows 7 upgrade page:
http://eu.computers.toshiba-europe.com > Windows 7 Learn More
As you can see a free upgrade is only possible on notebooks purchased from June 26, 2009 to January 31, 2010.
Furthermore your model isnt Windows 7 supported. There is only a limited driver support for a clean Windows 7 installation and so you cant get a Windows 7 disk from Toshiba.
But all these informations are already on the Toshiba page ;)

Satellite A200-1M8: monitor switches off and can't back to Vista

Hello,
I have Satellite A200-1M8 with original Vista. Sometimes I have some problems with dispaly (I have the newest drivers).
The monitor switches off (not as usually but it is grey instead of black) every application run smoothly (I hear music of movie playing) but I can't back to windows.
When I push button hibernation and I try to back to windows I see the blue screen then the computer resets.
It happens really often and is really frustrating because my internet disconnects and downloads.
I don't think that temperature is too high because I feel it is cool. How to repair this?
Maybe some graphic settings or new BIOS?
Please help me. I can't stand this!
null

Hello
Is your notebook preinstalled with delivered recovery image or you have installed your own operating system?
I have Satellite A200-1CR preinstalled with original Toshiba recovery DVD. I use the notebook pretty intensively every day but I have never noticed something like this. Since when have you noticed this strange behavior?

Satellite A200-1M8 - battery loose power quickly

Hi
Please I need help... I have got Toshiba Satellite A200-1m8.
Operating system: Windows XP Pro SP3.
I noticed that the Wireless connection, running the laptop on battery power, drops and sometimes doesn't connect but plugging the power back to Normal power it easily does
I searched for similar issues and found that Intel for wireless devices does this to save battery power. I followed the instructions I found, and Wi-Fi worked well by increasing the power management in the Wi-Fi device settings ,but the main problem here is when I increase power management ,running the laptop on batteries, the computer seemingly to lose battery power quickly.
Should I change the deficient part by the manufacturer or what to do .......??
Thanks.

Hi again bro Horwath and sorry for being late.
Actually i'm still not sure/precise about testing the battery power while knowing what is running on the background. It is somehow confusing to keep on watching precisely.
Anyway here is what i came up with:
But before that the toshiba power saver settings that i use on battery is 3/4 towards the high preformance ( less long battery life ).
(every thing is the same as the default battery power profile except those: no hibernation..no system standby.. no Hdd power off and monitor off in 30 minutes)
first test:
the overall battery useage seemed to last between 1:20 or 1:30 hours.
running internet explorer with 3 to 4 websites in the same window....winmap....and [2 msn messenger (background) ]
it seemed that i lost 2% within 2 to 3 minutes ( but i still feel it is rapid ).... then leaving the computer idle seemed to have lost like 1% within 3 to 4 minutes.
second test:
The overall battery useage also seemed to last between 1:20 or 1:30 mintues.
i was running adobe photoshop for some minutes .....[ with msn messnger ( background ) ]
consumed like 60% of the battery power whithin like 40 minutes...
and the rest was left to the computer being idle just running 2 msn messnger on the background and consuming 40% within 30 to 35 minutes.
I also noticed that battery consumes 2% quickly on computer usage or apparently on _wireless internet usage_
Those are what i noticed, but still not sure 100%.
Anyway besides that my battery should last for 2 hours as i saw in some websites for this toshiba model .
In addition, why shouldn't the wireless device run normally like on any other computer on the default/normal level of power management so that i can have the normal battery power life.
Sorry for the complications in here :S.
thanks.

ITunes for 64bit Windows 7 Driver/CD/DVD/Drive Issues-

Hi There
I am sure that there are many many users out there suffering the same frustration as me in regard to ITunes just not working properly with Windoews 7 (64Bit).
I have been trying to solve the mystery of "ITunes for Windows Registry Settings Warning When Opening Itunes.
I have tried all the recommended actions to correct this problem without any success and I do mean ALL.
Below is a screen shot of my registry, can anyone see anything wrong with it?
In the meantime (Last four months) I have stopped using ITunes and instead have used Digital 7, this will be my very last attempt to get ITunes working properly, failure will mean consigning ITunes to the same place as any other Software that does not do wshat it says on the can.
I hope someone can help.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I still have Cd/DVD drive issues

The CD is ejected after a short while and never mounted. I have cleaned the optics of the CD drive and reset my PRAM.
Has anybody discovered a complete solution for this problem.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Any solution to DVD drive issue post Lion install yet?

Any solution to DVD drive issue post Lion install yet?

Since installing Lion no DVDs are being read by the superdrive, this is a problem that has been highlighted by quite a lot of people.
CDs are being read fine.
After inserting the DVD there is some noise, sounds like it is trying to pickup the DVD then spits it back out.
Previous posts from other people:
http://www.mac-forums.com/forums/os-x-operating-system/245917-heads-up-lion-supe rdrive-fake-glitch-possibly.html
https://discussions.apple.com/thread/3199297?start=15&tstart=0

Re: Satellite L30-105 Vista - Power Calibration Error - need new firmware

Hey there guys =)
Ive got a Satellite L30-105 running a 32-bit Vista. And even if i try several different burning softwares (Imageburn, Nero), and with TDK-cds, I get a error from the burning softwares, saying "POwer Callibration Error".
The Satellite L30-105 (Article number PSL33E-02S026N5), uses a cd/dvd burner called MAT****A DVD-RAM UJ-850S
I am wondering, can i download and install new drivers for my dvd-drive???
i am also gonna try to buy this "cleaning-cd", to try to clean the lense. cause i bought the laptop in 2007... so its like grandma..
But do u guys have any other what might be wrong?? Is it expensive to get a new cd/dvd-drive for this laptop???
Cheers and thank u!

Hi
Power calibration error means that the ODD laser lens cannot calibrate in the right position.
Usually this has nothing to do with an drive firmware but with the hardware problem.
In most cases the CD/DVD drive must be replaced.
Im not sure how much an new CD/DVD drive could be but fact is that you cannot use any CD/DVD drive
You need an compatible one and such compatible and supported drive could be ordered from an local ASP.
greets

Qosmio G20: Can not burn CD's but only DVD's - power calibration error

Hi
I'm having some trouble and i think it's very strange.
I can't record audio or data cd's!
i've used sonic reducer, as nero, as windows media player..tried 3 different brands of cd'r and i can't burn audio or data files in any of those..BUT...on the other hand i can burn DVD'S...this is very strange right?
Ps: when i record with nero i keep having this message on the relatory of the burning process : "power calibration error" but only i when i try to burn cd´s.. dvd's recording doesn't have this problem
do i need to update some drivers?
please any help would be super or i will have to make a big trip to solve the problem on the laptop shop.
regards

"Power calibration" - When burning a CD the drive tries to write a test signal to the disk to set the calibration of the laser. If it cannot write a readable signal, this is called a "power calibration error". The error message usually means that there is something wrong with the media.
Please try to use few different empty CDs (Verbatim, TDK, Maxell and others).
Check also this page http://www.cd-burner-help.com/power-calibration.htm
Maybe helps.
Good luck!!!

M30-842: Power Calibration error while burning DVD-RW

I have faced a problem with my M30-842. Several times I have tried to erase burned on my laptop DVD-RW and Nero would say "Burn process failed. Power calibration error". So I cannot erase or continue multisession DVD-RWs.
Burning CDs is ok.
Please help me with the problem, how can I solve it? SOS!
Semen

Hi Semen
Can you please try to use roxio software built into Windows XP? There is also the same option. It will be interesting to know if this problem is caused by software that you use or if there is some malfunction of your device.

Re: Cd/DVD drive issue - error code 39 on Satellite P series

Hi,
This is my first request for help.
My CD/DVD drive is no longer recognized and when I go to Device Manager and click on CD/DVD I am informed that the file cdrom.sys is there but cannot be loaded.
An error number 39 is reported.
Any advice would be greatly appreciated but please keep it simple to one line actions if possible.

Of course you can get some advices ;)
I think you would find it faster if you would search in the forum firstly but I will try to help you too.
There error code 39 is very common issue and can be solved easy;
Check this MS knowledge base article:
http://support.microsoft.com/kb/314060/en-us
So firstly remove the CD/DVD drive from the device manager.
Then access the registry using the regedit command and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and wait till the CD/DVD drive was installed again.
Thats it. ;)

Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

Hi,
My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
DVD drive isTSST CDDVDW-TS-L633A
Can you help?

Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

Satellite 2430 DVD drive issue

Hello there,
my Satellite 2430 has got a strange DVD problem and can't figure out what is all about. All started when I tried to do a full recovery. The unit wasn't able to boot from DVD. I've checked the DVD drive with different bootable disks but still nothing. Unit doesn't want to boot from DVD drive even if F12 is pressed and DVD device selected. Not to mention that the recovery DVD is loaded normally in my desktop pc. The notebook boots up Windows OK from HDD and, what's amaizing is that inside Windows everything is OK. The DVD drive works like a dream. However, this is not enough to perform the full recovery as the recovery process can't be initialised by Windows. Hopping that the BIOS is causing the problem, I upgraded it to version 1.6, but there is no change in DVD's behaviour.
Any thoughts, before using a big-big hammer?

Hi
Did you try to change the boot priority in the BIOS?
If not so change booting procedure to the CD drive firstly. The LAN should be on the end.

Satellite A200-1M8 PAE6E: CD/DVD drive issue - power calibration error

Similar Messages

Maybe you are looking for