Satellite A200-1NF and Win7 - FN keys are not working

Hello,
I have installed Windows7 32bit on *Toshiba Satellite A200-1NF* (model +PSAE6E-055021FR+), but I have a problem with the combination of the Fn key with the key functions Esc, F1, F2, F3, F4, F5, F6, F7, F8, F9 and F12. No problem with F10 and F11. I read the A200 user's manual without any solution.
Note that I bought Satellite A200-1NF with Windows Vista 32 bit.
Could you help me !
Yassine
Message was edited by: yacbeng1

There is no special instruction:
Using Win 7 the functions keys requires installation of Value Added Package and Flash Card Support Utility. Thats all.
Probably your problem is related to some registry problems. Cannot say for sure.
But you can play a little bit around with the mentioned software.
Uninstall both tools. Then install the display driver.
Clean registry using the CCLeaner. Then reboot several times. Install only VAP just to check the FN key functionality. If it will not be enough, install and Flash Card Support Utility
good luck

Similar Messages

  • I do have HP Envy M6 1216 Tx notebook and its brightness keys are not working.

    I do have HP Envy M6 1216 Tx notebook and its brightness keys are not working.
    This question was solved.
    View Solution.

    Hi,
    Try using Recovery Manager to reinstall your original AMD graphics driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    After the reinstallation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Solved My left and right arrow keys are not working

    I just installed gnome (been using kdemod) and now, while in gnome, my left and right arrow keys are not working. Please help me solve this. I am not using compiz.
    Last edited by patrickaupperle (2009-03-25 11:19:04)

    Hi!
    I had that problem with Debian and later Arch, after I messed something up (never found out what). There was a chaotic but easy cure though (I've got no idea, why it did that on 3 different installations the exact same way - might be a logitech-keyboard issue or something... me-as-user-related)?:
    - do all keyboard changes needed in xorg.conf NOW, had to repeat "strange steps" after each change.
    - add new keyboard layout (no changes to default) in gnome keyboard settings
    - delete old keyboard layout
    - browse trough the keyboard layout "previews" of the newly added layout until it crashes (this step might be optional *g*)
    - restart gnome, add "new new" layout, delete "new old" keyboard layout, and set the "new new" layout right (try evdev-manages first, then switch to youkeyboard/yourlocal if that didn't do it).
    good look!

  • Convenience Keys and mute/play keys are not working on my curve 9300

    Convenience Keys and mute/play keys are not working on my curve 9300, can any one help to resove this issue? 

    Hey amghouri,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up and doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test the keys before restoring any data to the device.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Left and right arrow keys are not working properly now

    I searched the forum and didn't see this posted. My left and right arrow keys are not working properly now.
    For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
    Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
    The issue persists after shut down, and even when logged on to other users, e.g. Guest.
    All other keys seem to be working fine, including the up and down arrows.
    I don't think it's a cleaning issue because fn + left + right produces the "[" character on the screen.
    Any ideas?

    I'm having the same type of issue on my MacBook except not with arrow keys. The volume keys do different things when I click on them. For example, the mute key brings up the dashboard and the volume up key makes all the open screens smaller (don't know what this feature is called). I did a software update then restarted the computer when this starting happening. Any help would be greatly appreciated, thanks.

  • Numeric Keys and some other keys are not working

    Hi,
    I am having T60 2613 HNU model, ,the problem i am facing issue in keyboard.
    following key are not working
    numeric keys are not working
    end key is not working
    left arrow is not woking
    working keys are as follows
    5,6 is working
    all alphabet keys are working
    I have even updated the bios also not working, I went to bios and made to load default value. my problem is not solved
    i try to remove the xp and tried to go for Fedora 12, there also i am facing the same problem.
    Do any body have solution of this. , please help me.

    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62911
    run the above software. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Left click behaves as right click and the alphabet keys are not working

    Left click behaves as right click and the alphabet keys are not working

    It could be due to a Windows Update.
    I am also facing this issue. All my friends using Windows on Mac are also have got these ssues.
    Don't worry, you are not the only one facing it.
    T_T

  • Home, end, av pag and re pag keys are not working properly

    Home, end, av pag, re pag and directional keys are not working properly. Home key instead of going to the beginning of the page, it goes to the end, and av pag, re pag and the directional keys are working only when te cursor is in 'text mode' like if going to write. the problem appears after refreshing to the last version.

    Try hitting '''F7'''.
    http://kb.mozillazine.org/Accessibility.browsewithcaret

  • Spacebar,Enter,Delete,up and down Arrow keys are not working...

    Hello Everyone,
    My Hp Laptop has gone through a serious problem. Its Spacebar,Enter,Delete,up and down Arrow keys have stopped working . I am not sure how this problem caused . So i gone  through varios fixes, that were -
    1. Rstoring to an earliar date.
    2. Re-installling Keyboard driver
    3. Formating the System.
    The third fix Formating helped me and my keys started working . After some day I installed a software HP Network Manager but this after installing it again those keys stopped working and also the LED lights on Caps Lock and Wi- fi are not turning on but these two are functioning normally.
    the some of the information related my HP laptop are-
    Model: Pavilion G6
    ram 4 gb.
    OS: Windows 7 Home Basic
    can anyone please suggest me is it a hardware related problem or some software/driver  related ? And also what next i do to fix this serious issue...
    Thanks in Advance.
    This question was solved.
    View Solution.

    Hi Alien004,
    You and Advance23 have pretty much covered everything at this point and I believe that it is a hardware issue. I would advise that you contact HP regarding a possible repair. You can reach HP Total Care at 1-800-474-6836 in North America or start here outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My left and right arrow keys are not working

    I am having problems with my left and right arrow keys no longer working. I have tried restarting, running Mac hardware check, and nothing has come up. I haven't spilled anything on it, so I don't know why they have stopped working.

    Sorry I didn't get to this thread sooner. From your posts it actually sounds like you may have a defective keyboard. Going to the nearest Apple store for assistance is a good idea. Be sure to [make an appointment|http://www.apple.com/retail] first or you may have to wait a long time to talk to a Mac Genius.
    Best of luck.

  • Up and down arrow keys are not working properly when using SQL CLI on Linux

    Every time I hit up, down, left, and right arrow keys to return to a previous sql command I got ^[[D, please any hints to fix this issue?
    The backspace works fine with me. I tried to use stty to fix this issue with no luck.
    Thanks
    Mohamed                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Which SQL client and Linux version are we talking about?
    Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
    sqlplus command line editing

  • Satellite C850-B635 and Win7 - card reader is not working

    My notebook came with windows 8 and the card reader was working
    but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
    I downloaded a driver called card reader controller but it didn't work as well
    I don't know if there is a problem or there is a driver that I should install and I don't know .
    please help me solving that problem .
    In my windows device manager these devices isn't recognized :
    *PCI simple communications controller
    *SM Bus Controller
    *Unknown Device
    I tried to search in my drivers download page in Toshiba website but couldn't find these
    please help me making my card reader working again.
    Regards
    Message was edited by: domaking

    To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
    My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
    I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
    http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
    Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
    Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
    Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

  • Satellite Pro M50 (PSM55E-001001EN) - Some keys are not work

    Hi all
    Ive got a problem with my keyboard on the above model. I originally thought it was just the keyboard so I bought another one and installed it and this one is doing the same.
    Problem:- r button and y button not working originally new keyboard not working at all just typing randomly!!
    Could this be an internal problem or have I just bought a duff keyboard?
    Thanks in advance for your help.
    Tim

    Hi
    You mean R and the Y letter dont appear always on the display but only randomly?
    Usually such issues are related to the keyboard buttons.
    But if the new keyboard didnt solve this problem then an internal issue could be possible.
    As Raver suggested it would be interesting to know if this both buttons will function using an external keyboard.
    You could also check if the BIOS is up to data and if not, then update it.
    In many cases a loose keyboard cable could cause such issue too. So as you see everything must be checked

  • I have a iMac running on an iMac and the F operation keys are not working properly.

    My new iMac bluetooth keyboard is having issues all of the F operation keys are not working exept for F12 witch is supposed to be volume up takes me to mission control. I went into system prefrences and there was no setting in keyboard for the volume keys there are some settings for the operation keys but they are all checked and they are still not working and the settings that are checked arn't even what the keys are supposed to do. Please help.

    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.
    PRAM RESET
    Zap the PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • HT4818 my zero and nine key are not working

    my zero and nine key are not working and also //////// symbol sometimes keeps repeating

    Try an external keyboard. If it works, you need a new internal keyboard.

Maybe you are looking for