Satellite A200-1T8: Cannot enable HDMI

Hi
I have install hdmi on my laptop Satellite A200-1T8 with Win 7 32BIT and any time i open it, it tell's me 'you must enable hdmi '
If i go to hdmi control, the enable is there but i can't click to make it enable.
Can some please tell me what to do, to enable it .
thank to you all

Hello
> and any time i open it,
What do you open exactly?
For me it sounds like that you have disabled HDMI in BIOS as Paolo30 wrote. Check the BIOS and enable HDMI.
Furthermore if you have installed Windows 7 32bit that was not delieved with your notebook make sure that display driver from official Toshiba page is installed.

Similar Messages

Satellite A200-27R cannot start up

I have had my Satellite A200-27R for 2 years and 8 months and 2 weeks ago it crashed and turned itself off. At the time I was browsing on the internet and probably had open 3 or 4 webpages when it froze and I had a blue screen with white writing telling me something had gone wrong and my laptop was shutting down to protect itself.
I was unable to turn it back on for 24 hours but when it did come back on it seemd to be working normally again but I backed up all my files incase it happened again. About 10 hours later the same thing happened again: freeze; blue screen and then trying to reboot.
Since then, when I try to turn it back on it either gets stuck on the Toshiba "leading innovation" start up screen; or goes to a black screen and tells me there has been a media test failure and something to do with Realtek about 100x or until I take out the battery so it turns off; or asks me to start in safe mode and do system restore which I have done several times now but this has not helped.
I would be really greatful if anyone could tell me if they had any similar experiences and what they did and if there is anything I can do to fix it? Many thanks.

Hi
BSOD can be the result of serious software problem or hardware issue.
If new OS installation didnt help you to solve this, I think that the hardware malfunction would cause the BSOD.
Usually the notebook shuts down automatically because of the higher temperature.
Higher temperature can affect other parts like RAM modules or motherboard.
So in many cases the BSOD appears due to memory issue.
I think you should firstly clean the cooling modules. You should remove the dust using a compressed air spray. In most cases this is the best procedure to get rid of the dust.
Then check the RAM modules. You can try to boot the notebook with one module only.
Then switch the modules to different slots in order to check the slots too.
Of course the HDD should be checked too. You can use a free software called Drive fitness Test. Its good, freeware software which can be downloaded from different pages.
If no of mentioned tips would help you, then I would recommend asking a Toshiba technician for help. They could use some special tools in order to get some results about the malfunction.

No sound on LCD TV when Satellite A200 is connected via HDMI

The problen is: I connect notebook (A200) to LCD TV (Philips) by HDMI. The video is OK, but sound stay on notebook not in LCD TV.
May be the problem is HDMI 1.2 does not support sound and video together? Only 1.3?
Sorry for my English

Sound should work with every HDMI cable as far as I know. Have two of them, one with HDMI 1.3 and another one, which I don't even know, but I guess not the 1.3 standard, as it was pretty cheap.
To enable sound via HDMI you will have to go to control panel - sound. There select the digial output device as standard. Make sure you have closed the media player or any program which has sound output before. Then start player again and sound should now be heard through TV.

Re: Satellite A665-13V - Cannot enable WLAN Funktion

Good morning,
I have the Toshiba Satellite A665-13V without the 3D function when I bought it was installed there on it Windows Vista operating system, I do not think much of Vista, I have the hard drive formatted immediately partitioned and Windows 7 Pro x64, including all new driver installed!
After about two days I have accidentally pressed any key and thus the internal wireless adapter disabled,
Now I am faced with the problem that I can not enable the feature!
The Toshiba Value Added Package, I had already installed in two different versions to get the function of the FN keys, but nothing happens when I press the FN + F8 key, all other FN commands remain untouched!
Does anyone of you how do you activate again specifically for this model, the internal wireless adapter?

Hi
Please check if Wlan card is visible in the device manager as suggested by Keany.
In case its visible, the Wlan driver was installed properly and the lack of FN+F8 functionality seem to be related to missing Toshiba software
You have installed only VAP (value added package)??
In this case you are missing the [Flash Cards Support Utility.|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=5383&selSh ortMod=987&language=13&selOS=30&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=all&page=2&ID=75049&OSID =30&driverLanguage=42]
The Flash Cards Support Utility controls the FN buttons and needs to be installed next to the VAP.

Re: Satellite A200 PSAE6E: Cannot install Flash Cards - invalid serial number

PLEASE I CAN'T INSTALL THE FLASH CARDS SUPPORT UTILIY, ALL THE TIME AT THE END IT SAY'S
"THE SERIALNUMBER IS INVALID"
PLEASE I NEED YOUR HELP TO INSTALL
FN KEY IS NOT WORKING PLEASE HELP ME. WHAT CAN I DO PLEASE ?
I'M USING VISTA HOME BASIC 32 BIT
PLEASE I NEED YOUR HELP.
Message was edited by: niijosh

Hi, I had a similar issue on Sat Pro A200 PSAE7E. wrote to Toshiba support and got the following reply (in July) - never heard from them again but the older Canadian version worked for me:
Thank you for emailing Toshiba regarding your issue with Toshiba Flashcards.
The issue you have highlighted is currently being investigated by our level 3 team because unfortunately, you are not the only customer affected by this problem.
The only alternative we can currently suggest is to download and install the Flashcard Utility update from our website in Canada. This has been found to resolve the issue in most cases. The web link for this update can be found here:
http://209.167.114.38/support/Download/files_Downloads/psae6c/TOSHIBA-Flash-Cards-Support-Utility.zip
If you wish for further support with this issue, please feel free to contact us by email again or call in to our Technical Support department on the number shown below. However, we would like to point out that this issue is being worked on and that a solution should be provided soon.

Satellite A200: I cannot establish drivers unknown devices

Hi,
In the system devices I cannot establish drivers for (a) mass storage device, (b) Unknown device in Other Devices section.
Can anyone help me on this?
kvasilis

If you use the XP on the notebook then you should update definitely the BIOS to the XP version. Then reinstall all available drivers from the Toshiba European page.
This will help to get rid of these unknown devices in the device manager.

Satellite A200 (PSAE6) Cannot dowload BIOS update

Hi! I have some kind of problem. I want to upgrade my BIOS, but i can't dowload it from dowload page!
Maybe I can dowload it from somewhere else?

Hi
You have to mark the option Yes, I would like to proceed with the download.
Then the button Download will be activated and you could perform the download.
bye

Cannot start recovery installation on my Satellite A200-28P

I am trying to restore my Toshiba laptop Satellite A200-28P (Windows Vista Home) using the product recovery disk supplied with the laptop, no matter what I try to do I cannot get it to run, the only thing it will allow me to do is restore the laptop to an earlier date. I have full admin rights on the laptop, there are no virus's or any other malware on it, all this seems to have happened since it updated with windows vista about two days ago, have uninstalled the updates but that had no effect.
I cannot find the recovery console any where on the laptop yet I know it was there before. I have tried many of the solutions found on the web but none of them work. I did use the recovery disc about 2 1/2 years ago when the laptop crashed and it worked fine then.
Any help apprecited

I cannot remember anymore how it was with A200.
Have you got recovery DVD only or you were also able to start HDD recovery installation using F8 at start up (Advanced boot options > Repair my computer)?
Anyway, your problem description confuses me.
If you use recovery DVD as bootable disc there is no repair console or some options.
When recovery installation starts you can just see menu where you must click on next.
Please check my lats posting on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61124
Can you see the same when notebook starts to read recovery disc?

Satellite A200 - Cannot change language on Toshiba OEM CD

Hoping to find some help on how to change my Toshiba Satellite A200 from Spanish Language to English.
I asked a friend to buy me this notebook from Spain, unknowing to him the OEM came in spanish language and the recovery CD as only is only spanish but i don't understand spanish and i have been finding it difficult to go about the notebook since i don't want to click the wrong thing in spanish.
Even when i install programs, it automatically installs in spanish and this is really frustrating,
Somebody HELP!!!

The notebooks are country specific products. That means that every notebook manufacturer offers product with country specific keyboard and operating system.
Toshiba recovery image is not multilingual installations image and you cannot install Vista on English using this DVD.
What you need is Microsoft Vista installations DVD on English language. Drivers, tools and utilities for your notebook on English language you can find on European Toshiba support page under http://eu.computers.toshiba-europe.com

After MOBO exchange cannot get Satellite A200 to work properly

HI guys,
I have a Satellite A200 here, my friend took it to pc place and they told him it couldnt be fixed and needed a new mother board... well I managed to fix it and also connect it to the internet (Ive fixed a few PCs) anyway I did all the updates then it took forever to shut down.
Now it wont load it just says loading thats all. Or I get a black screen and now it doesnt want to load.. I cant get in to do a restore or do a hard drive test. Do u suggest anything?
I downloaded recovery disks the other night n they dont seem to want to work either. b4 I got it working I somehow got in and did a recovery or factory default software then it worked but I cant remember how I got I there lol.... any info will be helpful..and thank u in advance
Its running windows vista

As far as I know recovery disc cannot be downloaded so I dont understand what have you done exactly.
Anyway if the notebooks hardware is OK you can install OS using original recovery DVD disc or install OS using original Microsoft installation disc.
If you have this original recovery DVD (ask your friend if he/she has one) use it for OS installation.
If you use Microsoft disc all necessary drivers you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
If you have more concrete questions you are welcome.

Satellite A500/02J: Cannot get REGZA/HDMI link to work

I have a Satellite A500/02J laptop with hdmi out, and i have a hdmi control program pre-installed from toshiba.
I just recently purchased a REGZA 32AV500A LCD toshiba television and have my computer running through the tv via hdmi.
However, my tv has regza link and as far as I can tell my computer supports regza/hdmi control however i cant get the link to work.
I have a windows meda centre remote which i can use to put the computer to sleep and wake it back up.
However one remote is better than two, also i need to be able to boot the computer from shutdown just by turning the tv on. Under hdmi control i can set the computer to shutdown when the tv is turned off however i dont know how to have the computer boot from shutdown simply by turning the tv on.
Any help would be greatly appreciated!!!!!

Hi
The user manual says that the remote control of the connected TV can be used to operate some of the computer functions which are:
use the TV remote control to output the computer screen onto the TV screen
use the TV remote control to launch operate and close applications on your computer
Turn on the TV when the HDMI output is selected using the FN + F5 key
Switch the video output (HDMI or LCD) when executing certain desktop icons
Enable/disable the REGA link function on the computer
But you should also check your TV settings and notebooks BIOS settings.
Im not quite sure if the HDMI REGZA option is available in the BIOS but its worth a check
I have scoured through the user manual trying to find an answer to this. Im not trying to use the remote to control the tv, I want to use the computer to tell the tv to power up. I have a logitech K400 keyboard that I use to both put the computer to sleep and to wake it up.
However, I want the tv to auto power on (and auto power off once the signal is removed) once I wake my computer back up and a signal is sent through the HDMI cable. REGZA link indicates that this is possible, both my tv and laptop have REGZA link. I want to eliminate the remote from my living room.

Cannot connect my Satellite A200-1MB to new WLAN router

Hi All,
Recently i bought the LinkSys Router (Model no: WRT120N) and configured it. But it is not connecting to my TOSHIBA laptop (model no: Satellite A200-1MB) with this new router.
It is a wireless connection. I don't think its something to do with the router because the other laptops can access the signal and they can able to connect to that router.
Can anyone please help me out in fixing this?
Thanks & Regards,
Razzaq.

hi rajak.net,
sure all users in this forum are willing to help...
make sure that:
- the same encryption method is used
- the same access key
- the same channel is used
- the ssid is visible
if you cant make a connection turn of *all* encryption and test it
sometimes a update of the ap firmware makes it running...

Some Microsoft Windows Update cannot be insatlled - Satellite A200-W00

Hi,
I Have been having a problem with updates on my Toshiba Satellite A200-W00 Machine. I have two particular updates that continuously fail.
I have been in contact with a Microsoft personnel who has been sending me step by step trouble shooting to try but I've had no luck. These updates are:
*Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB956390)*
*Cumulative Update for Media Center for Windows Vista (KB955519)*
*Security Update for Windows Vista (KB953155)*
This was one of his emails
From the problem description, I understand that several updates failed to be installed, and you have tried some troubleshooting suggestions, but the issue still persists. If there has been any misunderstanding, please let me know.
Given this situation, the issue may occur if the related system files are corrupted. In order to continue troubleshooting it, please first temporarily uninstall the security programs, and test the update again. If still failed, please take your time and try the following steps to repair the system.
In-place upgrade
==========
Though this operation will not remove or modify the installed programs and files, I still suggest that we backup the important files before doing this. In addition, we may have to reinstall the device drivers after this operation. Thank you for your understanding.
1. Start the computer and access Windows Vista.
2. Insert the Windows Vista DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click Start, click Run, type Drive:\setup.exe, and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the Which type of installation to you want screen, click Upgrade to upgrade the system files of Windows Vista.
After it completes, please try to update again.
Please try the above steps and let me know the results at your earliest convenience. If there are any questions or concerns, feel free to contact me.
I look forward to your reply.
Best Regards,
Bill
However Vista was preinstalled on my laptop and obviously I don't have the disc. Anyone know where I can get hold of it or have the same problem with similar updates. I've tried disabling my antivirus, firewalls, antispyware disk checks, clean ups etc and nothing.
Any help would be much appreciated.
Thanks

In my opinion updates issue have nothing to do with notebook manufacturer and I also think that Microsoft is the right address where you must ask for help.
About missing recovery DVD there are no many options for you. If you don't have it you can order new copy for you. The right address is https://backupmedia.toshiba.eu/landing.aspx
Bye and good luck!

Re: Satellite A200 (PSAE3E) Enabling Bluetooth cause BSOD using Win 7 64bit

Heallo,
I have a problem with Bluetooth in Satellite A200 (PSAE3E).
My operating system is Win7 Profwessional 64 bit.
When I'm installing a driver for BT system is making everything correctly, then restarting (after prompting).
When WiFi and BT switch is off everything is ok but after turning wireless connection with this switch after fiew second computer is showing dump memory and doesn;t want to work anymore... Restert helps until next turning on the switch on front panel.
What is wrong ? I was trying to install drivers, unistalling everything and installing...
Thank you for help.
Jan

Hi buddy,
Your posting is a little bit confusing I have checked the specifications on Toshiba website of Satellite A200 and some models are equipped with Bluetooth. What Satellite A200 model you have exactly and does it have Bluetooth model?
If yes I would try to reinstall the whole BT software. Uninstall, restart and install it again
Has Bluetooth worked on preinstalled Vista from Toshiba?

Satellite A200-2BH PSAE6E: Cannot install Flash Cards Support Utility - serial number is invalid

Hi
first sorry for my bad English.
Second I have a Toshiba notebook Satellite A200-2BH PSAE6E I changeg my OS to Vista and I have a problem with "Flash Cards Support Utility". I can't install it.
I have this message error "the serial number is invalid" I don't know what to do.
Thanks for your help

Hmm did you follow the installation instruction placed on the Toshiba driver page?
There installation order is important.
WINDOWS VISTA
No. Component Name Version
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221

Satellite A200-1T8: Cannot enable HDMI

Similar Messages

Maybe you are looking for