Satellite A200-23U - DVD-ROM problem after firmware update

Hi! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I update firmare first to TO02, then to TO03. None errors was shown. After reboot my device is locked (doesn't open/eject by button or by any software) and ImgBurn (for example) can't find any writers. In system devices now it's shown as:
IDE\CDROMTSSTCORP_CDDVDW_TS-L632H________________*BOOT*____\5&1AC5D6C0&0&0.0.0 (I think there must be *TO03* but no *BOOT*)
What's wrong and how can i fix it?
PS Sorry for my bad english .)

I won!! TSL632H_TO??.exe - it's just SFX-archive that can be unpacked by WinRAR (for example). And then we got SFDNWIN.exe program and firmware dump file (*.bin) separately, which can be used to upload firmware without any checks (compatible/non compatible).
*WARNING!!! NO ANY WARRANTIES!!!*

Similar Messages

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Re: Satellite A200-1AX doesn't boot after BIOS update

Hello all!
I wanted to install XP on a Satellite A200-1AX.
So I tried to update the Bios to the version that supports XP.
When I tried to install it, Vista crashed and now the laptop won't even turn on.
When I keep the power button pressed, the fan wheezes but nothing else happens.
I think the BIOS is gone or corrupted.
What do I do?
Thanks in advance for any help!

> When I keep the power button pressed, the fan wheezes but nothing else happens. I think the BIOS is gone or corrupted. What do I do?
What to say buddy. Looks like something went wrong during the BIOS update procedure Possibly the BIOS was not written correctly and the ROM module must be flashed again using a special procedure and tool.
In such case you can do nothing you have to contact the ASP in your country for a fix!!!
Dont waste a time and ask an authorized service technician for a help.
Good luck and best regards

Satellite A200-23P - DVD-rom mechanic not working

I am sorry for my English in advance this topic! - Thanks
I have very big problem with my DVD writer (rom).
I bought SAT A200-23P three weeks ago.
The OS Win VISTA was installed. DVD-rom worked good.
If I installed Win XP to second partition on my HDD (before I make install disc with driver for sata disc in nlite) and installed all drivers and utilities for Toshiba notebook, I found that my DVD-rom does not respond while I press eject button.
DVD mechanic does not respond for eject in the XP and not even in BIOS!
Interesting is, DVD mechanic is detecting in BIOS, is detecting in XP, operating system XP votes - DVD mechanic working correctly - its fable.
However, if I installed XP on second partition, Win Vista does not load :(
I don't have a second chance for second selection (Vista and XP).
I have now XP only, even if Vista is on first partition - I didnt delete it.
Do you think the DVD-rom is HW or SW problem?
I think, seeing that DVD-rom not respond in BIOS - HW error.
But is very strange, if I install XP from DVD mechanic and close then is done, DVD-rom not working ... : (
If I open it manually and insert the disc, DVD not working (led diode not blink, just if I turn computer off, led blinked once).
PLS help me somebody -
THANKS!

Hi Michal
Your issue is very strange I mean the CD/DVD drive issue
Fact is that the CD/DVD drives eject function should functions no matter what OS was installed on your notebook. It has nothing to do with your software on the HDD.
So I wonder why the eject button works with Vista and not with preinstalled XP OS ?:|
My only plausible explanation is that sometimes there is a loose connection between the notebook and the drive. At the other hand the issue could be related to the hardware problem too
As you see its not easy to say whats wrong exactly we can only speculate.
Now some details about your dual OS installation.
You cannot choose between the Windows XP and Vista because the Vista boot manager was overwritten during the Win XP installation.
This happened to me too. I have installed Win XP on my Satellite and was not able to start Vista.
The solution was easy; I have used another original Vista DVD (from my friend) and booted from this DVD. The Vista has renewed the boot manager and then I was able to boot the Vista.
Then I have downloaded the tool called Easy BCD.
This tool can change the settings the Vista boot manager. I have edited it and inserted a new Windwos XP OS entry.
Thats it!

N78 problems after firmware update

I have recently updated my N78 (RM235) firmware to 13.052.231.6.
Before the update the internal GPS worked very well, finding satellites quickly and holding a strong lock. After the update the GPS is very poor, taking a long time to find satellites and loosing signal very easily.
Can anyone help with this problem or tell me how to re-install the previous firmware?

Has everything else stayed the same and only the GPS antenna reception got worse?
If that is the case you are right, but maybe the update made other improvements and for some reason one of them worsened the GPS antenna...just guessing...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

C3-01 Problems After Firmware Update

After updating the firmware from v5.65 to v6.0 the phone lost some features -namely:
Chat
Media Player
Ovi Store
"Favorite Contacts" on homescreen
default wallpapers
Solved!
Go to Solution.

Finally, I've fixed the problem!
Going back, I updated the phone from 5.65 to 6.0 via OTA(over-the-air) update -in other words, I updated the firmware using the phone while connected to my home wi-fi network.
In desperation to find a solution, I hesitantly re-updated the phone... But this time via PC.
I opened Ovi Suite and updated the phone -again, expecting it would reinstall version 6.0 .
After the update, all the apps that I've lost came back.
I then checked to confirm if it was indeed version 6.0 -alas, it was not... It was version 6.05.
Now, everything is working as it should be; mail, chat, ovistore, calculator, favorite contacts on homescreen -everything!
It feels good to figure it out all by myself. Hehehehe!!

Audio in problem after firmware update

hey all,
I've recently started using garageband to record and play around with my music, and I love it. Unfortunately, after installing the recent firmware update, my computer's audio in jack doesn't work anymore. It recognizes that there's something plugged in, but instead of having an signal, I get this clicking that clips the audio input at almost any input volume. I have tried it both with my bass and just the cable, and I have also just plugged some headphones into the jack- same results for everything. Is there anything i can do about it or do I just have to wait for another firmware update before I can use garageband again?
2.2Ghz Macbook Pro Mac OS X (10.4.10)

well what happened was I was updating iTunes (7.3.1) and the updater said a quicktime update and a firmware update were both available so I downloaded and installed and now the problem. It's like a really fast click track when I plug in and it's not just in garageband, I'm getting it in the audio-in option in the system preferences menu. Do you think doing a system restore would solve this problem?
PS- I believe the update was something along the lines of a "kmbp firmware update" I think that's what it was called... :/

Overheating problem after firmware update

Hi,
A friend of mine noticed a CPU temperature increase in between 10 and 15 per cent, after the MacBook EFI Firmware Update 1.1. Has anyone else noticed a similar behavior? Any ideas or suggestions?
Thanks in advance,
Gonzalo

Originally Posted by ketter
HP DL380 G7
OES 11 SP1 / SLES 11 SP2
patched up to March 29, 2013
HP LTO-5 Ultrium 3000 tape drive
Arkeia backup software
Everything was running fine. I updated the server firmware using the
HP Proliant Service Pack on Apr 10, 2013 and haven't been able to get
a good backup since. Arkeia support says problem with the hardware.
But testing with the HP diagnostics says the hardware is fine. I
checked with HP support and they agree that the hardware is fine but
there are some communication issues. They recommended that I upgrade
the driver. They sent me here:
HP Smart Array P212 Controller*-* * RECOMMENDED * HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) - HP Business Support Center
I attempted to install that, but it failed due to dependencies. So
before I go any further and risk messing something up. Does anyone
have suggestions for this? If I do need to update the driver, is
there another way I am supposed to do it vs using the driver from the
HP website? Or how do I deal with the dependency issues...the only
patching I have done with SLES so far is through the channel.
Ken
may i ask what kind of dependency issues you're facing? i've installed the SP2 (kernel 3.0.x) based package last weekend without any issues on a default kernel. are you sure that you've grabbed the rpm matching your kernel version?

Satellite A200-1YU and Pioneer DVR-K17A Firmware Update.

Could you please give me link to the newest firmware for my Pioneer DVR-K17A (Satellite A200-1YU, Catalog Number: PSAE3E-06201RPL), I was looking for it everywhere, but I couldn't find it, please help me.

Visit Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads and check if some firmware updates are available.
If something is offered there you can use it and you will not cancel the warranty.

Problems after Firmware update

I have a big problem with my ipod nano, @ the firmware update it disconnects from pc and now it didn't work anymore because of a mistake in the firmware what can i do? please help me

If you have symptons stated on this thread, try the steps there.
http://discussions.apple.com/thread.jspa?threadID=544840&tstart=0

E3000 problems after firmware update

It seems internet browsing doesn't work after the firmware update. Everything else works , aim steam msn, bittorent but anything http related will not work.

on both computers i have run some tests
ping 127.0.0.1 -fine
ping 192.168.2.1 - fine (gateway)
ping 192.168.2.3 (another computer) fine
ping 192.168.2.254 dsl modem (fine)
ping www.comcast.net fail
I have thought it could be the DSL modem but it works just fine when i use my Belkin pre-n router and the Belkin never needs a power cycle.
I can get HTTP functions when i reboot the router.
I have also set up a DYNDNS to see if a friend could ping me and connect to a server for me thru my IP address and it was successful its just websites and this is happening on all the computers and playstations (theres 2)

Sony SBH50 Multipoint problem after firmware update

I recently updated the firmware on Sony SBH50 bluetooth headset and now, I cannot use Multipoint anymore. I have to switch off and pair individual devices while Multipoint was working well before the firmware update. Please advise what to do

I just purchase it and I cannot connect to my Z3 in same time as my Z3 tablet compact. it is last version of soft and on firmware

N78 GPS problems after firmware update

I have just updated my N78 firmware to 13.052. Before the upgrade the GPS worked really well but after it struggles to lock on and hold position. It took an hour to find satellites earlier and as soon as i picked the phone up it lost its position.
Has anyone else had a similar problem?
Is it possible to reload the previous firmware?

I had the same experience.
Yesterday roaming across forums I saw a post suggesting a phone reset as simple as tooking out the battery for ten seconds and restarting the phone.
Well, I opened the back cover, took out the battery for around ten seconds and closed the phone being careful to align the pins of the internal GPS antenna to the back cover GPS antenna.
Then I restarted the phone and after two minutes it sees four satellites, and after five minutes nine satellites, completing the fix in less than five minutes.
Today, the GPS is still working (I tried the fix ten minutes ago with the same times).
Therefore, I consider the problem solved.
Moreover, the internal GPS now works also with Google Maps, and this according to my opinion demonstrates that probably the problem is not Nokia Maps 3.0 , because I am using Nokia Maps 3.0 and Map Loader 3.0 .

Scanjet 7000n EWS problem after firmware update

I recently upgraded the firmware on our 7000n scanner in the hopes it would add smtp over ssl. I updated the firmware by uploading it via the embedded web server. The update appeared to go smoothly with no problems or errors, however, the embedded web server no longer functions properly.
If I enter the IP into the web browser it initially takes me to a blank page. I can refresh the page and then the "home page" of the scanner comes up. If I click the admin login, the login page comes up, but after logging in, I once again receive a blank page. At this point, refreshing the page does not work, but if I remove "/hp/device/SignIn/Index" and hit enter, the page comes back up and I am logged in as administrator.
The main problem comes when I go to try to reconfigure email settings. I can make it to "/hp/device/Send/Index" where I select the check box for the server I want to edit, but once again, clicking edit takes me to a blank page. At this point I can hit enter in the address bar, and it will bring the email settings page back up, but I never get to the Edit page after hitting the edit button.
I tried reflashing the firmware from a USB flashdrive, which also completed with no problems, but the EWS issue is still present.
I haven't been able to find any information about the issue online, and all google searches I've tried just bring up pages on how to install the firmware, and information on using the embedded web server, so it doesn't appear to be a common issue.
Does anyone have any idea what I can do to fix this?

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

E71 Backup/Restore problem after firmware update

after i restore the data using the PC suite, I'm facing a connectivity problem, No MMS and web browsing are working, even after i re-install the settings from the provider and setup wizard, same thing, even the wireless connectivity is not working.
note that they are working be4 i do the restore (plain phone).
any recommendation.
It's never too late to learn ....

I upgraded my firmware (why do nokia call it 'software'?), which i kind of regret now. I don't see any difference to my phone, plus i hit a major problem.
Before upgrading i backed-up my phone.
After upgrading firmware i tried to restore the backup to my phone - wouldn't work!?!?!?!?! - plus the phone said that i had a massive error and had to take my phone back to retailer. it would not restart.
Seriously crazy
FIX:
'Hard-reset' the phone (erases memory and takes you back to basic nokia phone software) - While turning the phone on you hold down 3 buttons: " green-phone & 3 & * ". Hold down for about 10 sec's. The phone should start working again with the new firmware - albeit with only basic settings.
Go to the backup-restore, and restore from your last backup.
HOWEVER, UNTICK 'phone settings'.
This should get almost everything back for you (calendar,contacts,etc), except for any software that you had previously downloaded and installed on your phone (e.g. google maps, fring, skype, youtube, etc). Easy enough to download & install again. Also, you might want to ring your phone company and get them to mms you the configuration settings for internet and mms again.
WHY WAS THERE A PROBLEM? I believe that the old settings of the previous firmware are NOT compatible with the new firmware. This makes the phone effectively stop working when you restore the backup.

Satellite A200-23U - DVD-ROM problem after firmware update

Similar Messages

Maybe you are looking for