Satellite A200-AH5 CD/DVD drive does not burn any CDs

I own a Toshiba Satellite laptop (A200 -AH3) running Windows Vista Home Premium.
For what it is worth, the processor is a T2085 @ 1.73 GHz. It is a 32-bit Operating System.
In Device Manager when I click on DVD/CD Rom drives, I get TSSTcorp CD/DVDW TS-L632D ATA Device.
Clicking on this I find that the driver is working properly and up to date. I have not been able to burn a CD on this system...
I have not tried to burn a DVD.
I have run through all the steps for burning a CD, however, but even though it goes through the process of showing the progress as each song from a playlist is burned to disc, when the disc is supposedly finalized...there is nothing on the disc when I try to play it back and with the exception of iTunes or another program opening when I place the CD into the drive to be played, absolutely nothing happens.
I tried burning music on a disc on my sister's desktop computer and it burned fine.
So...It is not a problem with the discs.
When I took the disc my sister had burned and placed it in the disc drive on my laptop, it displayed the tracks that had been burned and it played the music just fine. This has me really thrown for a loop.
The laptop is only a year old and I can't burn a single thing.
Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I have no idea if it will burn a DVD, but I have ruined 2 boxes of CD-R discs already. After the disc has supposedly burned the music...even though no music has been burned...the disc is ruined and has to be tossed.
I am not terribly knowledgeable about techncal aspects of computers, so I hope you can speak to me in general terminology if you respond to my problem. I really hope someone out there can advise me as to what is going on or what I should do to resolve the problem.
Thanks for any help in advance!
Thanks.
Gord
Canada

Hi
In your case I would recommend trying different CDs from different manufacturers.
You should know that not all CDs or DVDs would be fully compatible with your internal CD/DVD drive.
In many cases not compatible CD or DVD would cause exactly the same issues which you have described in your message so try different medias!
Furthermore I would recommend checking the Toshiba driver page for an CD/DVD drives firmware update.
As Im not mistaken the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for some new firmware. Maybe a new firmware is available
Last but not least you could switch to other burning software Im using the Nero In my opinion its the best applications for such purposes

Similar Messages

My cd/dvd drive does not accept any cds/dvds

I know this has been posted before, but I have tried many methods posted on this site and others, and either I have done them wrong or they haven't worked.
I have a three year old macbook pro running 10.6.8. I also have Windows 7 Ultimate running on Bootcamp, and my disc drive does not work on that OS either.
The weird thing is that two weeks ago, I installed a videogame using a DVD-R and it was working perfectly. I ejected it when I was done. I am 100% certain there is no disc stuck in the drive, and I have looked in Disc Utility to be sure of that.
I tried resetting the SMC by restarting the computer holding down SHIFT+CONTROL+OPTION and the startup button, and that didn't work. I tried restarting holding down the trackpad button, which would eject any stuck disc, among some other methods.
Maybe someone can point me in the direction of re-installing drivers for the disc drive or something? I really hope this is a software issue because I am in another country for the next year and going to an apple store would be out of my budget and very difficult. Any advice is greatly appreciated.
My last resort (I would rather get my computer fixed) is using a Macbook Air superdrive, however it is incompatible with my macbook pro (for some reason they only made it compatible with the Air, which I don't have). I heard there is a risky way of editing some "code" to get it to run with a macbook. But I must stress again, I would much rather fix the problem at hand than jerry-rig an external drive as a solution.
Thanks so much for your help.
-David
edit: as was mentioned in other posts, when I put a disc in the drive, it feels like something in the upper right hand corner is blocking the entry. The computer is completely unresponsive to the disc. Thanks for reading!

it feels like something in the upper right hand corner is blocking the entry.
Appears your optical drive is "broke" = hardware issue.
For DIY instructions check out the following:
iFixit
YouTube’s “How To” tutorials.
AS are not the only places that fixes Macs.
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)

Satellite L500-126 - CD/DVD drive does not open very smoothly

Hi,
I just got my second Satelite L500-126.
I exchanged my first one for a new one because the ESC key got stuck sometimes and made a squeaking sound.
Now with my new one, I noticed that my dvd drive does not open very smoothly and 2 little silver metal bars come out with the drive when I open it.
Is this normal?
Also, when I close the dvd drive i hear a little "ping!" sound.
Like a spring or something. Is this also normal?
Thanks in advance.

Hi
Im not quite sure what you mean by 2 little silver metal bars but my notebooks drive contains two metals (runners, trackage).
This is normal and these parts are important to ensure that the drive could eject properly and could stay in right position.
You will always hear an short click opening and closing the drive.
So I assume this is ok.

Satellite L50D-B - faulty DVD drive does not recognize disks

Bought 2 months ago. The drive does not accept CD's, DVD's or anything.
The name of the disk doesn't show up on the drive and if you double click on the DVD drive icon (while a disk is inserted) the tray opens up and says please insert a disk. I've tried many disks so they are not the issue.
So far I've taken it to tech support where I purchased it.
They said to do a reinstall so I did - with the full clean drive. I've tried updating the drivers but the computer insists that they are the latest. If I search for my model number on the Toshiba driver support site it gets rejected and I have no access to drivers (from Toshiba).
I checked out a few other forums and tried the regedit fix but that also did nothing. If no solution is found (and I've already wasted hours of my life on it) then this notebook is going to back for a refund and I'll get one that is going to perform the simple task of playing a DVD.
Windows 8.1
PSKUQA - 01300S

Hi
Sorry to hear that you have such stupid problem with your machine. On this virtual way it is not easy to say what is wrong there.
In my opinion you should not waste your time checking and searching for some drivers that probably will not help at all.
Reinstall original operating system that you have got with your machine and test functionality with factory settings. If the result is the same contact your local dealer or Toshiba service provider directly and ask for help. They can check ODD and exchange it if necessary.

My cd/dvd drive does not recognize/load cds

iMac 10.6.8 snow leopard with iTunes 11.0, purchased in 2008.
The cd will be accepted into the drive which will begin to turn/mount the disk followed by a few clicks after which the drive stops, tries again, tries a 3rd time and then ejects the cd. Dvds do load but I have been experiencing "skipping over damaged area" msgs when there is no damage. Resetting the SMC alleviates that problem for dvds but not the cd loading problem. Cds that have been accepted in the past do no load, even brand new cds.
I do play dvds and cds frequently but before I conclude that my drive is failing due to wear and tear, I wanted to know if there's a way to clean the drive, if that's the problem. The drive does not accept a dvd/cd drive cleaning disk.
Any suggestions for further at-home diagnosis/refurbishing before I contact my local authorized repair person or buy a Superdrive to substitute for the malfunctioning drive?

None of the information you have provided answered my question regarding a way to clean/refurbish a drive which will not accept a dvd/cd cleaning disk.
You finally advised me to do what I had already done prior to posting.
Perhaps you have a reading comprehension problem. Although the internal drives are generically referred to as superdrives, I only employed that term in my initial post when referring to purchasing an external drive to potentially be shared with a laptop. So, the confusion is yours.
The link below gives simple yet comprehensive coverage of when, why and how to reset SCM/PRAM, which does not include my CD mounting issue, although it resolved the "skipping over damaged areas" problem I had prior to my original post regarding alternative ways to clean the internal drive.
http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/
The link below contains a discussion of failing dvd/cd drives for iMacs of the same vintage as mine with the similar mounting issues. I had no success mounting a CD via a virtual XP environment, so it's more likely a hardware issue.
http://forums.macrumors.com/archive/index.php/t-1337712.html
Here's a link discussing pros and cons for buying a USB Superdrive (external Superdrive as I mentioned).
http://www.macworld.co.uk/news/mac/it-worth-buying-apple-usb-superdrive-3491736/

Satellite P105 mat****a dvd drive does not work with Win 7

Greetings,
I need an upgrade on my dvd for my vintage Satellite P105.
I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
2) So, my question to the mavens of multimedia is: What should be my next move?
3) Should I go external and face the USB bottle neck or
4) go for the bus speed on the internal dvd?
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Of course, if you could give me a model number and direct me to sales it would be much appreciated.
Thank you all in advance.
Rachel_1

1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
Makes sense
2) So, my question to the mavens of multimedia is: What should be my next move?
As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
3) Should I go external and face the USB bottle neck or
External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
4) go for the bus speed on the internal dvd?
If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
e
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thank you for your prompt reply. Could you comment on my questions add to your message?
Rachel

Satellite L300D-13S - CD/DVD drive does not close properly

Hi,
I have the L300D-13S about one week.
Today and for a short while last Sunday the DVD drawer will not stay closed.
I have restarted a few times and tried putting discs in but it still ejects and doesn't read the discs.
I installed Norton 360 Version 2.0 the day I got it, I really don't know a lot about computers and I am hoping it's simple enough.
I have checked the control panel and checked all the settings and they all seem fine.
I'd appreciate any help.
Thanks.

Hi
In my opinion its a mechanical CD/DVD drive problem and you should contact the ASP in your country for a check.
I mean your warranty must be valid because this notebook does not seem to be old.
So ask the ASP and maybe the CD/DVD drive must be replaced.
Bye

DVD drive does not burn/erase rewritables - Satellite P100-347

Hello,
I have purchased a Toshiba Satellite p100-347 PSPA6E laptop. It has a DVD Burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn all types of dvds (please see example using dvdino: http://tinyurl.com/2hbpqv ).
However, i cannot rewrite on my Maxell dvd+rw (1.4x speed) dvd. everytime i go to a software application to erase a dvd i've written on, it says format not recognised. For example Nero says "This disc is not rewritable and therefore cannot be erased. Please insert a rewritable disc".
The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(
Please can someone help :( i am really stuck and it would be much apreciated
Jas

Hello all,
thank you for your replies. Still no luck wth DLA :(. i installed DLA and i get the message 'write-once media such as CD-R or DVD-R is not supported by DLA' even though the dvd is a MAXELL Dvd+RW.
Now here is the strange part. I just borrowed a friends dvd external rewriter which burns the maxell dvd i have been using... it seems like that does not work on my laptop either now and works fine on my friends computer. perhaps it is not the dvd burner that is the problem but some setting on my pc. can someone please help :(.
JAs

New internal DVD drive does not burn at true speed

2 years ago, I bought a Pioneer 8x DVD/CD internal drive for my G4. The highest speed it burns at true 1 second to 1 second speed is 6x. When I select the 8x, every second that ticks off in Toast averages 2 to 5 seconds.
Fast forward to today! I just purchased and installed an NEC Model:_NEC DVD_RW ND-3550A, a 16x with dual layer capabilities.
I am having similar issues with the burn times. Not only are the seconds lasting 2-5 or more seconds but it gets down to about a minute left and I get a drive error message. I cannot succesfully burn at 16x even with speed issues. I tried it at 12x and 8x. I get a successful burn with 8x but each second lasts 2-4 seconds.
I downloaded the PatchBurn program and tried it with no improving results.
I looked at the NEC web site and all they offer for firmware is Windows based. Is there something that needs to be done to get the drive to burn actual 16x? OR is this an incompatibility issue between PCs and Macs?
I'd be happy to read your advice and suggestions.
Thanks. Scott
PowerMac G4 Mac OS X (10.3.9)

NecFlash.
If your mac is not an MDD G4, you will never get 16X burns, as the ATAPI bus on older G4's does not support the transfer mode required.
Beyond that, 16X is max rated speed, not actual burn speed across entire burn process.
Make sure your version Toast is updated to last revision (5.2.3) (6.1.1), etc.,
WWJD's comments per disc space & fragmentation are also considerations when burning DVD's.

DVD drive does not burn the DVD but prompts the mysterious 0x8002006D error

I read the earlier threads about the mysterious 0x8002006D error.
Then went to look at the console and the DiskRecording log reads:
Finder: Burn sense: 3/73/03 Medium Error, Power calibration area error
Finder: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
Can anyone tell what this could mean? Is the drive old and tired? I have the latest possible update for this Powerbook G4 1,25 GHz that I can use. What is meant by the latest firmware - where can I check which is the latest firmware for this particular DVD/CD superdrive ...
I am not trying to use the impossible, the G4 only supports DVD-R and with the speed up to 2x, so it is getting difficult to find suitable DVDs for this. The better MacBook is being serviced, as it has a screen problem, only after 1 year of use!
Please, can anyone help me, my works do not make any progres and I am in trouble!
I would be grateful for

Actually, I found out that for this particular PowerBook model there is no further firmware upgrade for the SuperDrive, only for the models starting from 1.5 GHz. Obviously all I can do is downgrade my OS to the version, which I suspect was the one that still supported my SuperDrive to see, whether it is the Drive that has died or whether it is the conflict with the upgrades and the hardware.

Satellite L655-106 - CD/DVD drive does not read disks

Toshiba satellite L655-106 dvd rom is reading all types of cds as blank.
I have run the registry cleaner and re-installed the driver but no effect

Are all disks no readable?
Try to clean the laser lens using cotton wool tip and alcohol.
Then try again

Re: Satellite A200-1MY: XP sound driver does not work

Hello,
I have a problem concerning my sound driver ( I use windows XP) . I installed all the xp drivers and it still doesn't work.
Can anyone tell me where to get a working driver ?
Thanks.

I hope you use WXP SP2. Anyway check please this thread. Try to use instruction given by Eldorado.

Satellite L300D-SP5001 Mat****a drive does not recognize blank CDs

Hello Everyone,
System Specs:
*Model:* L300D-SP5001
*OS:* Windows Vista Ultimate 32 bit
*Memory*: 4GB
*Processor*: AMD X2 64 Bit 1.9Ghz
(I know Im wasting resources with the 32 bit windows)
*Problem:*
Blank CDs are not identified by the system, meaning it always says there is no disc inside.
*Context:*
Disc is inside, is writable (blank) and have tried with many different brands.
The DVD-ROM is a Mat****a UJ-850S and is recognized (listed fine in the Device Manager), OS says driver is up to date and original discs are played fine.
*Question:*
What could I do to be able to burn cds? other than getting a more reliable brand and replacing the drive...
Thank you!

> However I do not have that record in my registry. I also use Nero and its also unable to identify any media in the drive. Im thinking the lens decalibrated (being it a laptop and having to travel long distances at times...) so perhaps I should get a new drive you think?
Yes, maybe you are right and this is a drives laser lens issue I mean this can happen if the laser lens cannot calibrate in the right position in such case only the ODD replacement would help.
But listen buddy. Did you try reinstalling the Windows?
If not, try this because this should be always done in order to test if this could be an software issue
You could also try to clean the laser lens using a cotton-wool tip and a alcohol
In some cases this could be helpful.

Re: CD/DVD drive does not seem to start DVDs in Satellite P750

My CD/DVD drive does not seem to start DVDs, it would turn and turn and the only way I can start a DVD (i.e. a movie) is by using Windows Media Centre, while software to be installed needs to be activated from Windows Explorer.
Anybody?
Please help.
Thanks!

Thanks, Xaver, tried this, still won't autoplay, it will just turn the dvd around for a while and then stop. Though when I open Windows Medi Centre and choos 'play DVD', it does the trick. The only way to install software, though si through Windows Exp[lorer and searching relevant file. Cheers,
Havoc.

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Satellite A200-AH5 CD/DVD drive does not burn any CDs

Similar Messages

Maybe you are looking for