Satellite A200 and iTunes 2131 error

Hello, new to the forums here.
I did a search and couldn't find anything current on the 2131 error I'm getting from Itunes with regards to burning CD-Rs. I understand the Dell computers using the same optical drive have a patch, just wondering if one is available for my Satellite A200-03V?
Thanks in advance.

Hi, I am wondering if someone can help me with the problem above but with a twist in that the laptop I have is a PCNextDay with a TSSTcorp CDDVDW SN-S082H inside.
I am getting the same 2131 error in itunes as the first poster and wonder if there is a firmware update available for the S-082H - i saw somewhere else there was an update for the L632H and hoping for similar. The link in the reply above mine allows you to enter in your laptop details for a Toshiba machine but I cannot find any actual details on the device itself.
Sorry if I am missing something but I would greatly appreciate it if someone could point me in the right direction as currently the only option I have is to use expensive CRRW (particularly expensive in Norway!) rather than CDRs for burning music cds which then dont play in my car anyhow.
In my searches for something on this I have also seen that Samsung have a CDDVD writer with the same product code (at least the SN-S082H) so wonder if this is a shared development (probably) and if that means I can use their firmware (maybe risky?).
Grateful for any help. Thanks!

Similar Messages

Help,my phone is in recovery mode and iTunes shows error 17

help,my phone is in recovery mode and iTunes shows error 17

http://lmgtfy.com/?q=iPhone+error+code+17

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?

Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)

That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).

HT201407 How come when I try and restore my iPhone 4 GSM (factory unlocked) with itunes, it starts ok, and then at 60% blocks like for about 5 min, and then continues till 100% and itunes give error msg (-1) ??? what can be the problem

How come when I try to restore my iPhone 4 GSM (factory unlocked) with itunes, it starts ok, then at 60% blocks like for about 5 min, then continues till 100% and itunes give error msg (-1) ??? what can be the problem.
thank you in advance.

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694

Help, my iphone is in recovery mode, and itunes shows error code 1

help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!

me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982]     0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982]     5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982]     7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982]     8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater:     BEGIN: Preparing first stage
[23:05:36.0982] bbupdater:         Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 5...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 4...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 3...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 2...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 1...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 0...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:     END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log

Satellite A200 and Windows 7 -It works!

I did an Upgrade from Windows Vista 32 Bit to Windows 7 on my Notebook Satellitte A200 PSAE6E.
No Errors and no problem with drivers. It works perfect.

Hi Mike
Thank you for this report.
Can you use all Toshiba specific tools and utilities too or you have removed some of them before you started the upgrade?

HELP! iPhone 3GS stuck in recovery loop and iTunes gives error message" iPod update server can not be contacted"

As I said, it's an iPhone 3GS (never jailbroken), iOS 4.1, PowerPC G4 OS X 10.4.11, iTunes 9.2. I have had the phone since new, never had any issues with it and am at my wits end trying to figure it out. I have seen many different solutions to this exact problem, but none have worked for me. Anyone have any ideas?

This is what I posted to someone else having an update issue... Just for your information:
I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has NEVER been hacked or jailbroken. WE AND A FEW OTHERS are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are having the same hardware issue all of a sudden at the same time. Apple/iTunes needs to fix this... and hopefully soon
Also: I can update or restore my iPhone 5 and other iPhones so it is not an issue with my firewall or other software on my computer. No one touches my iPhone or my computer they are secure, locked all the time, and I have no jailbreak software on my computer (Apple tried it and they are clueless at the moment from what I can tell).

Airport Express and iTunes give error: 'An unknown error (-15006) occurred while connecting to the AirPlay device'

Hi guys & girls,
Yesterday I bought an Airport Express 802.11n (1st generation); solely for the purpose of listening to my music without connecting any cables to my speakers.
I've done the set-up (i.e. linked the AE to my existing network without any Ethernet) and connected the AE to my speakers, and the light turns green. However, when I try to make a connection in iTunes to the base station, I get the following error: 'An unknown error (-15006) occurred while connecting to the AirPlay device “Base Station 5bf269”.'
I'm quite a noob with computers and the technical aspects, however, I normally get around by googling and trying out some things. I've tried the following things already:
- Downloaded Airport Utility 5.6 to change the IPv6 to Host (Configuration is set on automatic)
- Firmware update for the Airport Express to 7.6.1
My iTunes version is 10.6.3, am using MacBook Pro Mac OS X 10.7.4. I really have no clue what could be wrong and how to fix this. I'm only sitting 2 meters away from the AE so it cannot be about the range. Can someone help me please?
Thanks!!

No more need for an answer... the problem has been solved!

Satellite A200: Modem has an error 633: already in use or is not configured properly

My notebook is A200-FE0.
When I tried to make a dial-up connection, there is an error window says:
"Error 633: The modem (or other connecting device) is already in use or is
not configured properly".
When I test my modem by clicking query modem on the Diagnostics tab in the modems tool in
Control Panel, the modem responds normally and appear to be working
correctly.
When I test my modem by using the Toshiba diagnostic tools, it shows "pass" and I canhear the dail tone too.
I tired to uinstall and reinstall the driver twice.
But I just can't make a dial-up connection and keep getting the error 633. I am really upset about it.
Please help me! Thank you a lot!

Thanks for the hint.
I tried this method too. I am using windows vista home premium. I can't find the files named telephon.ini and tapiini.exe in my computer.
I noticed that this method is only for windows 98 and windows ME.

***!!!!! *Not Enough Memory, And Itunes Store Error Has Occured- try later*

I get this error message:
"We Could Not Complete Your itunes Store Request. There is not enough memory available.
There was an error in the itunes store. Please try again later."
When I try to:
* Listen to a preview of a song in the itunes store
* Watch a Movie or TV program I BOUGHT from the itunes store
* Or try to download my ALREADY PAID FOR songs from the itunes store
No matter WHAT I do... this shows up. I've updated everything there is to update (yes, including the Quicktime shiz), and am running itunes on a BRAND SPANKING NEW macbook... the best you can get... so I highly doubt it's a hardware problem in the computer itself (i.e...not enough memory on comp).
IF ANYBODY knows what to do... PLEASE HELP ME!!!!!!! Of course Apple won't write back with anything of value to this, nor do they know what to do when I try contacting them by phone.
sooooooooooooooooo annoying!!!!!!!!
thanks

Hello, everyone,
I just spent almost 2 hours with Apple support team to figure out what this problem is and they never heard about it before. Apparently, some cache files build up and something gets corrupt and affects the memory for iTunes to run the purchased songs. The solution we found that worked in my computer is:
1. restart it
2. once you hear the loud sound of the computer starting, press down "shift" and hold it. This will deactivate great part of everything running in the computer.
3. stop holding "shift" when you see the image of the spinning wheel, right below the apple symbol in the middle of the screen.
4. Log in. Let the computer fully start.
5. Once it's done, restart your computer again, but this time don't hold any key.
6. Log in. Let the computer fully start. Now, try your iTunes with a purchased song. It should play any song regularly now.
Hope it helps. I was having the same problem since New Year's Eve but Kevin, from Apple (California), was the best and figured it out this morning!
Cheers!

HT1296 tried to update both iphone 5 and ipad mini and itunes sent errors to both and now on each device it says to connect to itunes but nothing happens

i have tried to update both my iphone and ipad to the new software on itunes and both came up errors and locked me out telling me to connect to itunes but nothing happens

Try putting them in DFU mode. This helped me when it happened to my iPhone 5.
If you don't know how to do that there are plenty of tutorials on the internet. It only takes a couple seconds.

Quiting iTunes and iTunes scripting error

Every time I quit iTunes, it takes a long while before I get a message that "one or more applications are using the itunes scripting interface, are you sure you want to quit ? ".
This problem has only appeared a few months after first installing iTunes on a fresh installation of Vista Home Premium. I haven't installed anything recently that would use the scripting interface, so I don't know how to stop the error message and prevent iTunes from taking a long time to eventually close down.

There have been reports that the Logitech mx5000 wireless mouse and keyboard has caused this error.
But if it is not that, something must be using the iTunes COM interface, that is the mechanism for other programs to access iTunes.

Family Sharing and iTunes store error

I have setup family sharing using my wife's Appleid as the organizer. Everything was setup and working great until my daughter got an iPhone 6 for her birthday. After finishing setting up her phone she now gets the following message in the iTunes store if she is logged in with her account or if she is logged in with my wife's account:
This iTunes account is set up to use Family Sharing with a different iCloud account than [email protected] Learn More.
She gets this message when she goes to the App store on the iPhone 6, goes to the Updates page, and clicks Purchased at the top. On her iPad she instead gets a My Purchases link, and links to purchases from the other Family members.
I have checked the various iCloud and App Store settings and they are the same between her iPad that works and her iPhone that does not.
Any ideas?

Update...I now notice:
Going to: App Store>Updates>Purchases:
1) The message “This iTunes account is set up to use family sharing with a different iCloud account other than <her iCloud ID>...” Is now showing up on my iPhone and can no longer see any of my purchases or hers.
2) The same message above is now showing on my iPad mini (it didn’t before). But, I can still see both hers and my purchases on my iPad mini.
3) The message "This iTunes account is set up to use family sharing with a different iCloud account other than <my iCloud ID>…” still showing on her iPhone and she still can’t see her or my purchases.
iTunes Family Sharing still works fine.
Note: If I Go to Settings>iTunes & App Store then log out of my Apple ID, then go to App Store>Updates>Purchases and log into my Apple ID from there, My purchases show up (not hers). I then toggle between Updates and Purchases and the message pops up and unable to see any purchases, again. Same thing happens when I do it to her phone except her purchases show up (not mine).
I emailed this update to Apple...waiting for a reply.

IPod Touch and iTunes Download error

I tried renting a movie and buying four TV episodes two days ago. The movie started to download when i purchased the other four items. The movie then stopped downloading, and one of the shows began to download. Then that stopped downloading. Now none of them are downloading, and it says "Download error. tap to try again" So i tap, and then it starts to load, then the one below it starts to load, and so on, but then they all stop and say the same thing again. Im not sure how to solve this, maybe delete the items out of my downloads? Im not sure how to do that though.

heres what i did:
step 1: hook up to computer
step 2: sync (unnecessary)
step 3: under "store" go to "check for available downloads"
after that u should be good!

Satellite A200 and Windows 7 64bit - How someone test it?

Has anyone test and works with it.
I have *A200 23W* with 4 gb memory, vista sp2 installed and i want to have a clear install on *windows 7 but 64bit version*.
What do you think about?

Loaded windows 7 on an A200 psace with 2gb of memory, most things are OK. video drivers initially was generic vga but after windows update the correct geoforce go driver was loaded. The flash media was not working as windows couldn't find a driver, downloaded vista driver from toshiba website which corrected problem. I have the professional version of windows 7 so I tried the xp compatibilty mode, this doesn't work, it says that the virtualization option in bios isn't enabled even though it is enabled in bios. It's ealy days yet but everything is looking fairly good, I had the beta version running for 2 or 3 months without too many problems

Satellite A200 and iTunes 2131 error

Similar Messages

Maybe you are looking for