Satellite A200 and Windows 7 -It works!

I did an Upgrade from Windows Vista 32 Bit to Windows 7 on my Notebook Satellitte A200 PSAE6E.
No Errors and no problem with drivers. It works perfect.

Hi Mike
Thank you for this report.
Can you use all Toshiba specific tools and utilities too or you have removed some of them before you started the upgrade?

Similar Messages

Satellite A200 and Windows 7 64bit - How someone test it?

Has anyone test and works with it.
I have *A200 23W* with 4 gb memory, vista sp2 installed and i want to have a clear install on *windows 7 but 64bit version*.
What do you think about?

Loaded windows 7 on an A200 psace with 2gb of memory, most things are OK. video drivers initially was generic vga but after windows update the correct geoforce go driver was loaded. The flash media was not working as windows couldn't find a driver, downloaded vista driver from toshiba website which corrected problem. I have the professional version of windows 7 so I tried the xp compatibilty mode, this doesn't work, it says that the virtualization option in bios isn't enabled even though it is enabled in bios. It's ealy days yet but everything is looking fairly good, I had the beta version running for 2 or 3 months without too many problems

Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

hi there,
Most of the A200 series makes use of this video card chipset.
[Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
Hope this will help :)

Satellite A200 - Touch pad doesn't work with Windows 7

Hello,
I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
I would be very gratefull for any advice.
Thanks in advance

Hi,
Yes I have no function. I have been to the toshiba site but there was no windows 7 driver.
then to synaptics and downloaded the driver restarted as promted and still not working?

Satellite A200-TH7 - Windows Explorer is not responding

On random occasions (normally when I wake up the PC), and I click the volume control in the taskbar, nothing will pop up.
Then I'll go to move the physical volume control slider and nothing will happen.
However, at that point, I'll try to click anywhere on the taskbar, but it freezes and it says "Windows Explorer is not responding" and I have to restart the program. Once doing this, the volume control does not even appear on the taskbar. And if I slide the physical volume slider, Explorer freezes once more.
I have Vista and its an Satellite A200-TH7.
I have the volume on mute so I literally can't listen to anything now.
If I restart the comp it'll work, but this problem occurs frequently.

Hi
Thats strange and I never heard about such an issue.
Does the Explorer freezes in other ways too?
Anyway, you should make sure that you have installed all Windows Updates and Service Packs.
Furthermore update the AntiVirus software and search for Viruses.
And follow the instructions posted by Jimi.
Thats all I can say at the moment.

Satellite A200 - FN keys are not working

I have Satellite A200-1N2.
I setup fresh Vista ultimate 32bit because the last owner lost the device driver and all related disc to this laptop
So, i download all utility and driver from Toshiba site and install them i install and cofigure the toshiba Assist but i can't use volume key with Fn key and other too.
Please advice me
Thanks before

Hello Mona
It is not easy to say what is wrong there but to have well working OS with all Toshiba tools and utilities it is important to install all stuff following the right installations order. Please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Downloads and choose your notebook model PSAE3E and check Installations Instructions document.
Just install all listed stuff (available on download page) following exact installations order.
After doing this everything should work well.
Just one question: what do you mean with volume key with Fn? Do you mean MUTE option with FN+ESC?

Satellite A200-19L - TV-OUT not working

I have Satellite A200-19L (PSAEC) with nVidia *GeForce Go 7300.
The laptop came with Windows Vista Home. I downgraded the system to Windows XP
Professional with SP2.
Everything its ok except the fact that now I cannot connect the computer with my TV (I used to connect with _RGB-RGB_ cable, my TV has RGB slot, TV is a Samsung LCD). With Vista it was very easy to connect but now I cannot. And now I have this problem. I cannot to do this connection.
I installed the forceware 156.55 and my driver version is 6.14.11.5655.
If anyone knows how I can do this connection please reply.
It will be _helpful._

Hi
Im not 100% sure if my advice will help you to solve this issue but generally you should update the BIOS to the XP version if you want to use the XP on this Vista unit.
Furthermore you should install all Toshiba drivers in the right order
Then you should be able to use the FN+F5 button combination which helps to switch to the external display device like second monitor or TV.
Bye

Satellite A200 and iTunes 2131 error

Hello, new to the forums here.
I did a search and couldn't find anything current on the 2131 error I'm getting from Itunes with regards to burning CD-Rs. I understand the Dell computers using the same optical drive have a patch, just wondering if one is available for my Satellite A200-03V?
Thanks in advance.

Hi, I am wondering if someone can help me with the problem above but with a twist in that the laptop I have is a PCNextDay with a TSSTcorp CDDVDW SN-S082H inside.
I am getting the same 2131 error in itunes as the first poster and wonder if there is a firmware update available for the S-082H - i saw somewhere else there was an update for the L632H and hoping for similar. The link in the reply above mine allows you to enter in your laptop details for a Toshiba machine but I cannot find any actual details on the device itself.
Sorry if I am missing something but I would greatly appreciate it if someone could point me in the right direction as currently the only option I have is to use expensive CRRW (particularly expensive in Norway!) rather than CDRs for burning music cds which then dont play in my car anyhow.
In my searches for something on this I have also seen that Samsung have a CDDVD writer with the same product code (at least the SN-S082H) so wonder if this is a shared development (probably) and if that means I can use their firmware (maybe risky?).
Grateful for any help. Thanks!

Re: Satellite L855 and Windows 8 - can not adjust screen brightness

Hi everyone !
I installed Windows 8 on my Satellite L855 and it is running pretty well except that I can no more adjust screen brightness !!! I updated all the drivers for Win 8 but it didn't resolve the issue.
Hope someone can help me !! Thanks !!

Hi
Did you install the VAP (value added package) provided with Toshiba Win 8 upgrade assistant?
Its necessary and the brightness can be controlled pressing F button
F2 Decreases screen brightness
F3 Increases screen brightness

Same issue Network Discovery not working and Windows Update not working

I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank You

Hi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cortana and windows store not working on 10049 (italian)

I don't understand if those features are supposed to work. Cortana is acrivated, I can ask questions but no reply at all. The windows store doesn't work either. Am I missing something?

You can try restoring the apps by attempting the following-
            • In the Search the Web and Windows, type PowerShell
            • Right click on PowerShell and select Run as administrator.
            • Type the following command: Get-AppXPackage | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Start, Charms and Windows Key stopped working in Windows 8.1

I have read these forums about getting the Start button and Charms back by hitting Win-C. But that doesn't even work on mine. This started just Feb 2 when I downloaded the Windows updates sent out that day for Microsoft .NET4.5.2. I have uninstalled
that update. At least that stopped the error message I was getting about Microsoft .NET Framework unhandled exception. But my start, charms, and windows key on my keyboard remain unusable. Any help?
Thanks,
Kelly M

Hi Kelly,
What is your current situation?
Have you tried to restart Windows Explorer through task manager?
If the above is still not going to work. Run the following command:
SFC /ScanNow;
Dism /Online /Cleanup-Image /RestoreHealth;
Also check if you have any hardware driver update recently. Check at the manufactuer side and see if they could offer any helpful information.
Further, could you please have a share wit hthe update KB number, I will perform a test with that update.
Best regards
Michael Shao
TechNet Community Support

Satellite Pro A200 and Windows XP 64bit possible?

I'm the owner of that notebook & i'm wondering if it's compatible with Windows XP 64 bit.
I work with 3dsmax which don't work on Vista (32 or 64 bit).
Is there any problems with drivers & where I can find drivers for 64 bit Windows XP?
Cheers

Toshiba does not offer 64bit drivers for Windows XP.
So you must search on external websites for drivers but I could be that you dont get all drivers. To be honest if you dont use 4GB RAM or more in this laptop Windows XP is the best choice.
Here are some examples where you can search for drivers:
[www.intel.com]
[www.realtek.com]
[http://aps2.toshiba-tro.de/bluetooth/]
[http://aps2.toshiba-tro.de/wlan/]

Satellite P300 and Windows 7 Beta..

Hey guys..
I updated the horrible Vista that my P300 came with to the new Windows 7 beta.. Most of the features are working correctly.
Here are the problems i ran into.
*HDMI* - it does work, but i lose audio via HDMI if i pause a video. If i'm on youtube and i watch a video the audio will be fine until i either pause it, rewind or fast forward the video, if i click on another video it will also stop working. This goes for any sort of video i watch on the pc.. not just youtube.. even DVD's.
To get the audio via HDMI again, i need to go to audio devices and select pc speakers as default, then chose HDMI as default again.. then it will work until i pause or skip videos again.
*Wireless Card..*
If the P300 goes into sleep mode, sometimes i will not be able to re-connect to the wireless network again. I need to reboot the P300 to get it to connect again.
I also have 4 or 5 items in the device manager that are not installed properly.. i cant list them now cause i dont have my laptop with me.
Anyone else running Windows 7 Beta?? If so do you have any issues?

Hello
We all know that Windows 7 is still as beta version on the market and official support is not started.
So to discuss about some issues on Windows 7 is for me definitely superfluously.
The drivers, tools and utilities are not available yet and if everything works well it OK, if not we must wait until Windows 7 support starts.
I have installed Windows 7 on my Satellite Pro P300 and play a little bit with it but I am not wondering if something wont work as it should.

Itunes 7.7 and windows Vista not working!

Hello,
I have been plagued with iTunes and Vista problems ever since i got it on my Pc over 9 months ago!!
I had hoped that a multimillion company like apple most successful in this nich of the market would want to keep its customers and provide us with up to date valid software but NO..... 9moths later same problem!
Every time i uninstall and install a newER verson of iTunes i get the following sequale of errors:
1. Firstly a box appears with a sliding bar with " Please wait while windows configures iTunes "
2. When this finsihed another box appears " iTunes stopped working "
3. When u click OK (the only option) in the task bar on the bottom right a small bubble appears with the statment " Data execution prevention has closed iTunes "
Now i have been battling with this problem for some time and have tried many things like changing version of iTunes (clean uninstall and new install etc)
I have also located that if i try to start up Quicktime i get the same error box this time reading " Quicktime has stopped wotking "
I have uninstalled Quicktime and installed a new clean copy to no avail.....
Appart from throwing my iPod in the Thames and getting a samsung mp3 player, i dont see any solution... anyone have any ideas?
My Thanks in advance!

Vwsurfbum
iTunes is a free program - it doesn't make good business sense for Apple to hire people to troubleshoot problems on Windows hardware - they'd have to hire hundreds, if not thousands to remote in to PCs and spend time fixing this kind of thing!
If you are getting that message about data execution prevention, you need to get DEP turned off, come **** or high water.
How about turning off UAC, can you even do that?
And with UAC turned off, can you disable DEP?
How to Disable UAC
Remember you can always turn these back on to keep your system "safe" - this is just a test to get iTunes working.
And give yourself FULL control over the itunes folders , while you're at it:
How to Take Ownership and Grant Permissions in Windows Vista

Satellite A200 and Windows 7 -It works!

Similar Messages

Maybe you are looking for