Satellite A200 - Black Screen Of Death

Hi All,
I have a Satellite A200 model PSAFCA- 01K00J. This model I bought from Harvey Norman in Australia but I can find no listing on the Toshiba web site as either current or discontinued. That sux as I am looking to get any bios updates available to try and rectify a recent black screen issue.
The first time this occured I was able to re-start after removing the battery/disconnect power several times before it came good. The next day after a re-start attempt to install anti-virus updates same problem... disconnected power, removed battery, removed ram (replacing ram one then the other to check for faulty ram cards) and hard drive then bled off residual power with start button. Went through this proccess multiple times before eventually successfull. I have had to go through this a couple of times since after automatic re-starts for windows updates, etc. I have sourced the procedure for manually resetting the bios by jumping it but that is something I want to avoid doing until I have exhausted all other options.
Toshiba Satellite A200
Model- PSAFCA- 01K00J
O/S- Vista
Hard Drive- 160GB with 50GB free space remaining.
System 32 with duo core proccesors.(intel)
Bios Version/Date- phoenix technology's ltd 5.20, 25/10/2007
SMBIOS Version- 2.4
Any idea's on sourcing the latest correct bios or any other input would be gratefully appreciated... :)

Hi Timox, when I turn on at the start button the lap top displays (lights up) the satellite logo and the small display at the bottom front (power on/battery connected and charging displays) and you can hear the extraction fan running as normal but there is just a black screen. I have tried to set up an external monitor... the only time that worked was when I was pressing f8 to go for a system repair/restore but the restore made no difference. Other than that the external monitor shows the same black screen as the lap top.
Given that the bios controls the start up I would have assumed that would be the logical place to look (haven't tried the f2/escape deal yet) so curious as to whats leading you away from the bios ?
I am trying to get to the bottom of this by process of elimination so if you have any other tricks I can try first I would love to hear them... thanks in advance :)
Found a link for an old review of this model... Yet Toshiba doesn't list it for updates (grumble)
http://www.pcworld.idg.com.au/review/toshiba/satellite_a200_psafca-01k009j/218566/
Message was edited by: dustyminer

Similar Messages

Satellite A200 - black screen when reboot

I have Satelitte A 200 and I have the problem that when you reboot I should have only a black screen and goes no further. But I do not beep. Only available in one place. I have tried everything but nothing brings order. I wanted to install Xp but it does not work. Help.

Hi
You mean you dont see anything on the screen while booting? Not even the Toshiba splash screen?
Are you able access the BIOS?
Please check this.
You could also check this; remove battery and disconnect the AC adaptor. Then wait a little bit (1 hour) and after this short period of time connect both parts again.
Then try to boot up.

Satellite A200 - black screen after standby/hibernate

Hi,
I just bought my computer 1 week ago. It??s a notebook A200 series and every time I tried to suspend/hibernate it, it doesn't resume back or wake up. The power light is still on. The fan is still on. Even the num pad lock responds.
The Screen is black and not responding. I can only restart the computer every time this happens. I tried to search the web for this problem and I found other people with the same problem.
I only bought my laptop for a week, can??t believe this is happening.
Please provide me with a solution.
Edited by: ADMIN

I contacted toshiba around Janurary. I had the same problem on my Satellite A215-S7428. I dont remember what they told me to do. It envolved taking ount the battery, going to some window and changint the power settings for the moniter, like how much power does the moniter use on battery and when it is plugged in. They were set very low, around 20% and I had to raise them to 100%. That seemed to help. But now it is starting again. I happens when the screen is closed and the computer sleeps. When I open the screen, it is black. I used to have to restart my laptop just so I could it, after I contacted the support and changed the power stuff, it came right up in around 10 sec. Now it takes around 30secs. So does anyone know how to access the power setting window i am taliking about?

2013 MacBook Air black screen of death

My wife's MacBook Air (late 2013) suffered the Black Screen of Death. Looked at the Mac forums for advice, looked at some YouTube videos about changing the battery, was on the verge of ordering a new battery from Amazon. My wife took it to the local Best Buy, and they said they'd be glad to fix it for just $200. Called the nearest Apple Store, got a recording that said I could buy time just to talk to tech support. Finally called Computer World in Appleton, Wis., and talked to Jack. He said it sounded like the latest OSX install wasn't complete. Told me to restart with shift key down, hit right arrow and then the return key, type in the password (even though the screen was still black), hit return again and BINGO! The screen came back on, showed OSX had 2 minutes left to install! All's right with the Mac again thanks to Jack the Mac Guy!

"they said they'd be glad to fix it for just $200.": That's a lot for a simple OS reset...

I am using an iphone 3Gs and Itunes won't allow me to restore it?!?! help me fix my black screen of death!

Ok, I am trying to restore my iPhone 3Gs to 5.0.1 and when I do, it looks like it is going well until it says that is it preparing to restore, it keeps me stuck at that spinning bar and then after a while it gives me the error 1601 unknown error has occurred. I have tried looking on Google for over 3 hours now trying to find the answer to my problem and sadly I cant find one, I am trying to restore my IPhone because earlier I was playing with it and it ran out of battery and I let it change and walked away form it, I came back 1 hour later and it was still at the boot logo of apple, I waited 2 hours and it did nothing, just stayed with the boot logo. I then put it into DFU mode and it appears in iTunes as in DFU mode and can be restored but like I said above that it just gives me an error. I have looked into Google and tried every way possible and found out that I may have the black screen of death. If you have this problem and found a way other than getting a new iPhone, please contact me on this page because I am not in the mood to buy a new iPhone because this one has an expired warranty.
Also i have tryed all the things in the error support page and nothing works, uninstalled itunes completely and did all that other stuff but still the same problem and i have not found a way to fix this.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Black screen of death after warning "Disk 1 has the same disk identifiers as one or more disks connected to the system. "

Hi,
I am having the same problem / event warning, only one second after the warning occurs, I face a black screen of death leaving me with no other option than to switch off and reboot. After reboot I can work for some time but as far as I can see there is a
spontaneous re-occurance of the same warning and subsequent black screen of death.
It is hugely frustrating and don't seem to be able to solve it. It occurred in W8/W8.1 and W10 TP. All hardware seems fine. There are no other events that occur near the time when the BSOD occurs so I suppose its that.
HD (SSD'S) seem to have unique identifiers so I don't understand it at all. It does not matter whether I am browsing the internet, rendering images or simply leaving my laptop untouched (M6500 DELL).
Please help. It occurs 3 - 5 times a day and it seems unworkable.
Mike

Hi MAVH2014,
Which version are you running? Do you installed all updates for current Technical Preview?
Can you find any related events in Event Viewer?
For your disk identifier issue, if you have checked them already, I suggest you use following command to change the value:
Uniqueid
http://technet.microsoft.com/en-us/library/cc730793.aspx
Alex Zhao
TechNet Community Support

White screen of death going temporarily black screen of death.

I have a iphone4s that went white-screen-of-death on me just last week. recently its now giving me a multi-coloured screen show, and a finale of black-screen-of-death. Not sure what to do, and whether its worth going to the apple store when I can't afford repairs, and its a year out of warranty. I can still answer calls, or access apps, etc, but can't see what I'm actually doing.

I have a iphone4s that went white-screen-of-death on me just last week. recently its now giving me a multi-coloured screen show, and a finale of black-screen-of-death. Not sure what to do, and whether its worth going to the apple store when I can't afford repairs, and its a year out of warranty. I can still answer calls, or access apps, etc, but can't see what I'm actually doing.

So now a black "screen-of-death"???

I don't know what happened but when i suddenly got the urge to play some of my games on my ipod while listening to some music, probably bored or something, my ipod flips out and now is stuck on the "black screen of death"! the wheel locked up, my music stopped, and the screen won't shut off.
it reads:
This game cannot be launched.
This may be the result of a full iPod. (*)
For more information, please visit
http://apple.com/support/ipod/
(*) This is, of course, a bunch of (BS) since i have the new 80GB classics with only about 20GB on it.
I was thinking about letting the battery deplete then go from there, but any idea can and will be useful
Thanks

This may be the result of a full iPod. (*)
More likely it's the result of a corrupt temporary file on the iPod. Connect the iPod and delete \iPod_Control\iT.tmp . Probably also a good idead to check the drive thus:
*Checking hard-drive for errors*
Hold Menu+Select on the iPod for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive.
tt2

W700 - Random, frequent. Black Screen of Death

Hello,
I have a W700 that I acquired in june 2010 and that I enjoyed very much until the beginning of this summer.
Gradually I started to get black screens of death, no cursor, no response, no solution but to hard reset the computer.
At first it was only when I used one kind of browser, then all kind of browsers, then any progran then just at any time. At its worst it became a real russian roulette, any minutes I could get a crash no matter what I was doing but any activities increased crash chances.
I tested all my hardware, more specifically cpu, motherboard, ram, hard drive and graphic cards with various programs but they all returned a green light, a-ok. "no problem here".
I did maintenance on my registry, hard drive, culled unneeded start-up programs, upgraded drivers. Finally the crashes were so frequent I installed ubuntu.
Ubuntu did not cause any single crash in a couple months, reinforcing me in the idea that the problem was software in nature.
Yesterday I received a windows 7 ultimate and I reinstalled windows ... and after a few hours, after doing the updates and reinstalling programs, it started crashing again.
(By the way, my DVD player isn't reading dvds anymore I found out yesterday, that is also quite annoying)
Now, as I can number the installed programs on one hand, it crashes... moderately often.
So ... does anybody have any idea what causes these crashes and what I could do to stop them ? I would be very very very very very grateful for any help in the matter.
Thanks in advance : )

I tried to do the FurMark stress test and, indeed, it crashed after a while.
However a few weeks ago I did a GPU stress test with another program ( I forgot its name but it was rendering an earth in increasing details) and it passed without crash.
Since it crashes no matter what program I use and how intensive graphically it is, I am not sure how conclusive the fact it crashed during FurMark is.
(As I said, for a time the most stable activity I could do on this computer was play a MMORPG, which was noticeably more intensive graphically than, browsing internet).
I don't know ... I would be very happy if the cause of the problem was something I could fix since I really don't have the cash to buy a brand new computer right now.
Anyway, thanks for the help : )

Anyone else getting the BLACK screen of death after Kitkat 4.4 update?

Ever since the update, my phone is wacked, like everyone elses. I got my Samsung Galaxy S4 a month ago. Beautiful, loved it. Update happens: I want to pitch this thing as far as I can throw it.
The phone rings. I go to answer it but all I have is a BLACK SCREEN which is LOCKED. I have the lock on the screen, but if the screen is black, you can't see it - and you can't answer the phone! One day, I got a message, and could not get to that. Why? the BLACK SCREEN OF DEATH.
Someone told me to turn off Samsung Watch On and that has helped with some of the issues. But I still get the screen occasionally, and my battery life is GONE.
How do we get rid of this update? Should I just call Verizon and get a new phone with the OLD software? I hate this. I feel like I was the victim of bait and switch.

ltg123 - did you resolve the problem yet? If so, let me know how.
My (hopefully temporary) solution was to turn off my "Lock Screen" ... to do this, go to Settings, My Device, Lock Screen ... and select None.
The only issue is that you would no longer have any security for your phone and would be vulnerable to someone stealing your phone and having full access to whatever is on your phone that does not require a separate id and password. Dangerous, yes ... but, for me right now, it's better than not having any access to my own phone!
The Android update simply sucks ... some heads should roll for allowing such a crappy update to get (no pun intended) rolled out.

Fix For nvlddmkm.sys Black Screen Of Death

I think I finally found a fix for the Black Screen of Death from the bug with nviddmkm.sys and all the latest Nvidia Drivers. This works on my IQ816 with NVIDIA 9600GS, it should work for most TouchSmarts that are having the random black screens.
There is a free utility called RivaTuner that works with Nvidia cards. You can get it here:
http://downloads.guru3d.com/download.php?det=163#download
Do the following:
Install Rivatuner.
Click okay when it gives you the box about not being a supported card or whatever.
On the screen that comes up, click the tiny icon next to Customize, it's under Driver Settings in the middle of the screen. Then click on the icon for the card. It looks like a videocard and should be the first icon on the left.
At the core clock screen, click the checkbox at the top to enable. Click Detect Now when it asks for it. Set the dropdown on the right to 3D. Then set the core clock slider to 550 or as close as you can get to it. I had 551.
You can either check off start with Windows or wait and see if it's okay and then come back to this screen and check Start with Windows. That will make sure the setting will stay all the time. Otherwise it just reverts back to the original settings.
Click okay. And that should be it.
If you need help, watch the video tutorial on it here:
http://www.youtube.com/watch?v=NU8_EMjSUf4
So far, since I did this, no random black screens of death. So this may be it.
This question was solved.
View Solution.

gilandme wrote:
I might have the same issue, the problem is that my HP IQ804 desktop screen is in total darkness, no image, what can I do?
Did you try the steps posted above? if so in what order.

How do you solve the so called "Black Screen Of Death " On an iMac Intel 27" EMC 2309 and 2374

According to various forums I've visited , this is very common issue that Apple has not addressed. I've read that it could be a logic board issue on the graphics card or a LED driver board issue or even a temp problem. My friend just got this issue resolved on her MacBook Pro but it cost her $500 to have it taken care of. This problem is making Apple look very bad in the eyes of it's customer's. I won't post some of the negative comments I've come across on these forums as a result of consumer frustration with Apple not taking care of this. Let's just say it needs to be addressed. Oh and the " Black Screen Of Death " is what people are calling it, not sure of the official problem name but it's an intermittent tendency of the display to go completely black while the OS is running fine.

http://osxdaily.com/2014/11/22/fix-macbook-pro-booting-black-screen/
http://knowhow.com/article.dhtml?articleReference=1100&country=uk
http://www.imore.com/black-login-screen-your-mac-heres-fix
I wasn't aware of this problem - for the various fixes. Nice info to know.

10.4.8 Black Screen of death

On MacBook.
Updating from 10.4.6 to 10.4.8 (combined) update causes Black Screen of Death on restart. Reinstall (archive) from distribution 10.4.6 fixes. This is repeatable.

Yeah this is also happening on my Mac Pro. After the update reboots, I get the kernel panic screen. I am using a stripped raid boot disk and wonder if this is the issue. I had issues with the last firmware update because of the raid drive. It's repeatable... Archive and install is not an option at the moment as I can't seem to find my install disks (apple is sending me replacements for free -- wish they were downloadable... [email protected]).
I have a full backup (using superduper) and when I tried to restore it still kernel panic'd. So it must be doing something to the partitioning scheme?? weird..
Only after I blow away the raid volume, rebuild the partitions and re-create the raid drive, will the restore work.
I'm going to wait for my install disks and do some install tests on clean installs as my disk usage is too large (~450GB).

IPad 1 - Black Screen (Black Screen of Death)

My iPad has a black screen. I call it the "Black Screen of Death". The iPad is fully charged, is recognized in iTunes, will NOT reset by holding down both buttons for any length of time, and I have taken it to an Apple store where I was told they don't know what the problem is but I could purchase a refurbished iPad for $250.
This is the 4th time the screen has gone black. Each time I have been able to use my iPad is from doing a "restore" in iTunes. The restore did NOT work the first time, the second time or third time. I can't be sure how many times I used the restore function. I can only say that each time after several "restore" attempts, I've "given up" on my iPad and let it sit for an unspecified period of time. When I decided to address the iPad again, I clicked the bottom button and the Apple logo appeared. My iPad loaded up and then I connected to iTunes to load all my apps, music, etc. This last time, my iPad was up and running for only two days before the screen went black again. I was playing a game (app) when this occurred.
I am POSITIVE there are thousands of users out there experiencing the same problem but I have yet to read as to why this is happening. I believe users are tired of hearing "hold both buttons to reset" and "take it to the Apple store". Many iPads users are past their warranty, would like a possible or valid reason as to why their iPad is malfunctioning and a reliable software update solution or "do it yourself" remedy.
Is there anyone out there that can address our concerns with an explanation that "sounds" reasonable or a real solution and not the two standard responses?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
You can get the iPad repaired at 3rd party repair sources for less.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

MSI R9 270X Gaming 4G Black Screen of Death after driver install...

So I recently updated the drivers and AMD catalyst to the newest version. After doing that and restarting my pc, it will load to the Windows loading screen, then to the black screen of death. When I restart under last known good configuration, I can start windows, but I don't have the drivers installed. This is a fresh install, and no matter what I do, it ends in the same result. I've tried restoring the PC, and I can start windows again, but again. No drivers. I can't find an older version of the drivers that worked before. I'm just frustrated because I have 2 of the cards, and a quad display. But i can't use them... After researching, I found that this is a common issue, But I can't seem to fix it.

From your post in another thread I guess you tried 14.4 from MSI site. Use latest official AMD one (14.12) instead: http://support.amd.com/en-us/download/desktop?os=Windows%208.1%20-%2064

Satellite A200 - Black Screen Of Death

Similar Messages

Maybe you are looking for