Satellite A200 - error message on Bule Screen when I'm doing somthing hard

I have a Laptop the details is as below
*Model Name: Satellite A200-11C*
*Model No: PSAE0E-00X00KAR*
I have setup Windows XP (Service Pack 2) on it. After installation, when I try to Play Video file or Scan for Virus or working long it shows an message on blue screen. The Message is as below:
*A problem has been detected and windows has been shut down to prevent damage to your computer.*
*If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:*
*Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.*
*Check with your hardware vendor for any Bios updates. Disable Bios memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select Safe Mode.*
*Technical information:*
* STOP: 0x0000008E (0xC0000005, 0x8057064A, 0xA95718B8, 0x00000000)*
*Beginning dump of Physical Memory*
*Dumping Physical Memory to disk:*
As per message I update the BOIS, but I still facing this Problem?
Waiting for your reply.
Russell
E-mail: ni****[email protected]

Hello Russell
Few days ago I have similar problem on my Satellite P200. After installing one third party application I have had BSOD every time when this application load. I have tried anything possible. To start in safe mode and change startup options, to rollback OS to earlier time using system restore tool. I have also tried to remove preinstalled application in safe mode but nothing has helped.
At the end I have installed OS again using recovery DVD.
So, in my case I was sure why this happen. What is with you? Does this happen if you use some certain applications? Which player and Virus scanner do you use?
Does the same happen when you try to use Microsoft disc defragmenter?

Similar Messages

Satellite A200: error message - minimum requirements to install software

Then there is another problem.
I tried to install it but it shows error:
This computer does not meet a minimum requirements for installing the software. Setup will exit.
Can you please tell me why.
I have already installed new BIOS and OS is Vista.

The Vista needs more computer resources as another Windows OS.
Possibly the OS needs all the computer resources like RAM, etc.. and therefore the 3rd party software cannot be installed.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Satellite A200 - Error code when using fingerprint

Hi
I have Satellite A200 with window vista 32 bit, when I try to log in via finger scan I got the massage (error code oxe 7210001 (An internal error occured (shared: encrypt-cryptopp(StreamTransformationFilter: invalid PKCS #7 block padding found)).)
Can any one help me?
Thanks

Hello
Im not an expert with this fingerprint tool but I noticed here in forum that reinstalling the fingerprint software could help to get rid of this problem.
According the Toshiba website the newest fingerprint software is version 5.8.0.4024.
Do you have it installed? If not reinstall the fingerprint software and test it again.

Error message to be thrown when multiple enteries are not entered

Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.

No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

Error message in my BB when i reboot

Hai,
i wanna asking question about my blackberry 8520 black, when i reboot my BB there is error message on the screen : Uncaught exception : indek 4 > = 4
sometimes the number 4 can change into 5 or others number
1.what that message mean ?
2. what the damage that will caused bcause that error message ?
3. How can i fixed it ?
thanks

I would suggest that you backup your device, wipe it (Options > Security > Wipe) and reload the operating system.
Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
See the link below, for the download and simple installation instructions.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
When you are complete, use Desktop Manager to restore you previous data to the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

. I have an iCloud error message on the screen.

The screen on my iPad is frozen. The hard reset does not reboot the iPad. I have an iCloud error message on the screen. That I can't get rid of.

Thank you. I had tried this before with no success. However, I tried it again. The problem is I don't know who to reboot without a keyboard. I can't get to the on screen key board with the screen locked up.
The error message I get is " iCloud Backup This iPad hasn't been backed up in 2 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi" at the bottom of the message is an OK button.
Now with the iPad removed from the keyboard:the screen will stay lit for about 5 seconds and then go blank. Turning power off and on brings up a blank screen with the iCloud message and the slide to unlock. Touching the OK button causes a brief flutter of the button. Trying to slide the slide to unlock accomplishes nothing, since it won't slide.
The battery was at 49% when the problem occurred. I have since recharged the battery to 100%. I tried earlier to reboot with the iPad connected to AC.
Again, thank you for your suggestions.

How to display error message on the screen

I am new to WD world and need all possible steps to resolve the following issue.
I need to display the error message on the screen if any required field is empty when user click on SAVE button.
I have set the attribute GO_MESSAGE_MANAGER and check the both box for PUBLIC and REFTO and set the associated type IF_WD_MESSAGE_MANAGER under COMPONENTCONTROLLER.
Under the method of COMPONENTCONTROLLER set the value WD_THIS-GV_NAV_FORBIDDEN = IV_NAV_FORBIDDEN. Which is type IMPORTING of associated type WDY_BOOLEAN.
GV_NAV_FORBIDDEN has been set to attribute WDY_BOOLEAN in the COMPONENTCONTROLLER.
Under the ACTION (on SAVE button) of my default view (VW_DEFAULT) I am doing the following.
IF lv_f_name IS INITIAL
    CALL FUNCTION 'BALW_BAPIRETURN_GET2'
      EXPORTING
        type   = 'E'
        cl     = 'HRRCF0002'
        number = '020'
      IMPORTING
        return = ls_return.
    lv_message = ls_return-message.
NEED TO PUT CODE TO PASS IT ON
ENDIF.

The thing I can not figure out is the input parameter of this call. My CONTEXT has a node1->node2->node3->f_name.
CALL METHOD lo_message_manager->report_attribute_error_message
EXPORTING
    message_text              = lv_message
    element                   = HOW WIILL YOU FIND THE VALUE OF THIS
    attribute_name            =
   params                    =
   msg_user_data             =
   is_permanent              = ABAP_FALSE
   scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
   msg_index                 =
   cancel_navigation         =
   is_validation_independent = ABAP_FALSE     .
wd_comp_controller->set_navigation_forbidden( iv_nav_forbidden = abap_true ).

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Itunes wont launch, no error message, no blue screens, just wont open

itunes wont launch, i get no error message, no blue screen, it just wont open. I've tried to delete and reinstall, but once i close itunes i still have same issue. it wont open again.

I have same problem on my XP lap top and Windows 7 PC. Apple have been investigating this problem for me for a week now without success so far. Understand it 's ongoing with other customers as well.
It is caused by an bit of program called APSDaemon supplied by Apple in latest i-Tunes. Your quick fix to enable you to open i-Tunes again is as follows:- open Task Manager (right click bottom toolbar), click on Task Manager, select Processes. Find APSDaemon, highlight and press END PROCESS. I-tunes will now re-open ok. You have to repeat this every time you want i-Tunes re-opened until you switchoff or restart.
A pain I know, but lets you keep going until Apple repair and release an update for i-Tunes

Error Message in selection screen Status bar is getting truncated

Hi Guys,
Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

Hi
Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
What you can do this split 50 and 50 like that you can give 200 chnars.
Data : Text1 type char50
Text2 type char50
If sy-surc ne 0.
Message Text1 Text2 TYPE "E'' or 'S'
endif.

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Error message in Selection Screen

Hi
reference no (p_ref) is in my selection screen.
If this field contains special characters (\ / : * ? " |, ) system must prompt error message in selection screen. How to do this. Pls help me
Regards
Anbu

after input form the user
use if condtion
and validate the field and through message.........
Reward IF........
Regards
Anbu
Edited by: Anbu B on Jun 17, 2008 8:04 AM
Edited by: Anbu B on Jun 17, 2008 8:06 AM

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

Satellite A200 - error message on Bule Screen when I'm doing somthing hard

Similar Messages

Maybe you are looking for