Satellite A200 - Flashcards are not working

Greetings
I have a Satellite A200-1M5 PSAE0E runing on Windows vista home premium 32-bit. I accedently removed the bluetooth driver then re-installed it again but it disappeared from the flashcards (Fn+F8 toggels the wifi only).
I tried to re-install the bluetooth driver (bluetoth stack and bluetoth monitor) but nothing worked. I was advised my Microsoft team to un-install the flashcards and VAP and re-Install them again and I did, but unfrtunately the flashcards disappered but in the same time the functions are working (Fn+F2 changes the power plane Fn+F6 dims the screen backlight ) but the flashcards does not apears. I've re-installed the flashcards utilities, bluetooth monitor, bluetooth stack , extended tiles for windows mobility center and even the value added package but nothing is working yet.
I was wondering what should I do now?
Is there any way to turn on/0ff the flashcards ?

Hi faraferoo,
In which order you have reinstalled all tools and Bluetooth driver?
I have checked the Toshiba driver download page and for Satellite A200 I have founded the installation instructions document. This is a list for the recommended driver installation order.
So step by step: Now remove all Bluetooth stuff, Value Added Package and Flash Cards Support Utility. Restart the notebook and clean Windows using CCleaner. Restart the notebook again. As you can see in installation instructions document you should install the tools in this order:
1)Bluetooth Stack
2)Bluetooth Monitor
3)Toshiba Value Added Package
4)Toshiba Flash Cards Support Utility
Please try it again with this order and post your result. It should work after this.

Similar Messages

Satellite C850D - keys are not working when trying to log into laptop

First I would like to say sorry for my lack of computer knowledge. My C850D is only 2 months old, last night it was working perfectly... this morning when I turn it on to type in my password not all the keys would work.
I got a little angry and just reset the laptop. Still not working and even after that.... any advise to why my keypads no longer works.

>My C850D is only 2 months old,
I guess you have an hardware problem.
Looks like keyboard malfunction.
The warranty should be valid if the notebook is only 2 month old
Therefore get in contact with Toshiba authorized service available in your country to get this issue fixed under warranty conditions usually the unit should be fixed free of charge.

Wireless connection on Satellite A200-1CR does not work correctly

Hi,
I've a problem with my wi-fi connection. Despite of I'm staying near my router I can't access to the Internet.
If i have connection, it's level from 1 to 3 (5 is the best).
I have the same problem with hot-spot. I cant access to the Internet or use only messenger, can't surf in the Internet, check my mails, etc.
Another person haven't this problem in the same places. They can access to the Internet. What's wrong? Can you help me?
I've a Satellite A200-1CR.
Piotr
PS. Sorry, I doubled thread

Hi,
I have Atheros WiFi card, but when i configured my router i write WEP key and when i configured my connection on notebook i use the same key.
I have the same problem with hot-spot :(

Satellite C660-17L - Some TouchPad functions are not working

My touch pad functions are not working:
- I can't use it to scroll up and down
- I can't use it to zoom.
What should I do to fix it?

Yes the model number is Satellite C660-17L
And no I didn't install the touchpad driver.
I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
I have no idea what this means but I click no and it comes up with all the mouse setting options.
What should I do now?

Satellite M70: Control button keys are not working

I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
Emm

Hey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.

Satellite A300-1DG - Easy keys are not working on Windows 7

My easy key are not working but the fn keys are. I installed all drivers for Windows 7 64 bit and they are still not working?
Please help

I did a clean install, and i installed VAP, the keys are working but the first one is not, and the second one which is used for opening WMP is now used for turn on/of the illumination keys, all other are working normal. I tried reinstall the vap, with cleaning the registry and then reinstalling...but it was the same...

Mbp numerical keys are not working

my macbook pro was using last one year now the numerical keys are not working find a solution

It sounds like what I have seen multiple times on a device with moisture damage.
Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
It really is more common than you think.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
*Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
Thank you guys and I know where to come again if I need any further assistance.
Again thank you everyone

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID:      559111.1
Type:      PROBLEM
Modified Date:      24-MAR-2008
Status:      MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

Satellite A200 - Flashcards are not working

Similar Messages

Maybe you are looking for