Satellite A200-PSAE6E - FN key not working on Vista 32bit

Hi all
I can't get the FN key to work, no matter how many times I reinstall Toshiba software, it just doesn't seem to work!
Anyone got a workaround?
I'm using Bios 2.40, and Vista 32bit

Hi
If you installed your OS manually the right installation order is necessary to get all Toshiba tools and notebook features working.
Please follow the installation instruction which can be found in the installation instruction txt file.
On the Toshiba European driver page you will find also the *Flash Card Support Utility 1.49.0.2C*. It is needed to use the Toshiba Flash Cards (FN + F* Keys).
Additionally the VAP must be installed too
Regards

Similar Messages

Satellite A200-1AX function key not working

Hey all
i installed XP a few weeks back and updated the bios to the xp version
I didn't like it and i went back to vista but now my function doesn't work.
I press it and press the screen brightness key but the controls don't show up anymore and i have to manually use it with my mouse or through the mobility center
is it because of the bios? I downloaded the new vista bios and now it says that rom space is full and quits
What do i do? Help much appreciated

Hi
The problem is that you need to update the BIOS to the XP version if you want to use all the notebook features on this notebook.
After the installation of XP you have to update the BISO XP and then you have to install all the available Toshiba XP drivers and utilities.
This should helps.

Satellite L850 - Special function key not working properly

Hi Everyone,
I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
Please advise. Thks a lot!

Take a look here:
Function key changes in Satellite and Qosmio 800 series
http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
You can use the traditional FN + F key mode or just an F key mode.
This can be enabled and disabled in BIOS or the HWSetup
In BIOS go to Advanced -> System configuration -> Function key mode
This mode can be changed
Also be sure that Function Button option is enabled too

Satellite A50-112: F1 key not work for entering Bios

my toshiba Satellite SA50-112 not entering into BIOS or CMOS setup because of F1 key is not functioning what i can do for changing the boot sequence to CDROM by alternative way.
please help us to work better

There are THREE ways to make your notebook boot from CD:
1) You can adjust the BIOS setting by entering into it with the key "ESC" (not F1 as you said before)
2) You can boot directly on CD by holding down the key "C" during starup
3) You can make the "Select Boot device menu" appear by holding down the "F12" key.
All above key combinations work DURING STARTUP of your notebook only. Therefor try your timing ;)
Good luck :)
electrochain

Satellite Pro A10 - some keys not working with new keyboard

Hi all
I hope some1 can help with this
i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
i fitted into my other A10 and all keys work so keyboard is fine.
All works ok with usb keyboard. Had motherboard out all seems ok.
Any help plz
chris....
Message was edited by: widgy

Hi
Why do you think that the motherboard is ok?
Maybe its a keyboard controller issue
Did you check if the cable was connected properly?
In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
Bye

Keyboard Satellite 3000-214 - Ctrl-key not working

Hi,
I've started my old Satellite 3000-214 Notebook and suddenly my Ctrl-key did not work anymore.
I've already tried to clean the keyboard by unmounting all keys from it and cleaning the foils, without success.
Can anyone tell me where I can get a suitable keyboard from (I live in germany)?
Does it has to be an original Toshiba keyboard or can it be from an other manufacturer?
How can I remove the keyboard from the laptop? Do I have to open the case or is it possible to get it out with a screwdriver or something?
Thx for any hint!
Best regards.
Ting

Hi
You should use the original Toshiba keyboard which is supported and compatible with this notebook.
All parts and devices you can purchase from the Toshiba authorized service partner in your country. The full database with worldwide ASP you can find on the Toshiba European support page.
Usually if you want to remove the keyboard you have to remove firstly the thin cover above the keyboard.
There you will find two screws which secure the keyboard. After removing of these two screws you will be able to put out the keyboard.
But be careful; the keyboard is connected with the flat cable to the motherboard.

Satellite A200 - Headphones and microphone not working (Win XP)

I have fully operational Windows XP with everything working just fine. However, today I tried to connect a microphone to the notebook, the software noticed it, muted the internal speakers, but there is no sound in the headphones whatever I do. I tried if the microphone jack is all right only to find out that I have the same problem - the realtek software notices me, that I plugged in a microphone, but doesnt record any sound.
I would be more than grateful for any help.

Are you sure that you have checked all necessary sound settings?
Im not Satellite A200 owner but Ive got a similar Satellite A series and I have installed both OS (Vista & XP) on my HDD.
From my knowledge you have to check different microphone settings in the sound & audio options.
In Control Panel you will find the Sound & audio devices. Choose it!
Then choose the tab called Audio.
There you could find the area Sound recording which provides information about possible devices for sound recording.
First of all you should check if the Volume settings are set to a higher level.
Secondly check if a right device was chosen (in my case its a Realtek HD audio input).
In the other tab Voice (near audio tab) you can test the voice recording too. This could be very helpful to check if the mic functions correctly
Please do this!
Bye

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Satellite A300 PSAG4A music keys not working

Hi,
I am new to this forum and actually Toshiba related problems in general. :P
I own a Toshiba Satellite A300-PSAG4A laptop running on 32-bit Vista. A few days ago, the Harman/Kardon illumination music keys on it suddenly stopped working. When I'm not using my laptop, I usually put it into Sleep mode and normally wake it up using these touch keys - however for some reason they randomly stopped lighting up and responding.
I tried the usual - rebooting the laptop and frantically testing the buttons but of course they are not responding. The keys and the laptop in itself have served very well up until now an I can't think of any reason why this is happening now.
I'm not super-computer savvy however I have done a bit of reading on the topic of these keys and wanted to try reinstalling the Toshiba Value Added Package method - however I could not find the TVAP file anywhere on my laptop.
Additionally, Toshiba does not seem to offer support for my laptop series (A300-PSAG4A); their download section only caters to the ST series. Please correct me if I'm wrong - I could be searching right or whatever.
I performed a System Health Report to check if it's a driver-related issue and it came up with the following :
Two error messages stating that "The device driver for Base System Device has not been installed" and one stating that "The device driver for #UNKNOWN# has not been installed.
I don't know what any of those mean or if they are relevant to my problem.
Please help?

> {quote:title=MisterX wrote:}{quote}
> Surely they do that I think you searched on a wrong page the A300 PSAG4A seems to be a Toshiba Australian series and therefore you should check Toshiba AU driver page.
> http://www.mytoshiba.com.au/support/download
>
> Here you should find the VAP
>
> Would recommend uninstalling the VAP firstly and after new reboot you could install the package again.
Hi, thanks so much! That was really helpful, I didn't know Toshiba has separate sites for different continents. I live in New Zealand, so that'd be why it's an Australian series.
However I mentioned earlier that I can't find the VAP file anywhere on my computer. I have since done additional reading up the subject and learned that the package also enables the FN keys - which don't seem to be working at all. I'm pretty sure my laptop doesn't have the file on it (it is second-hand so the previous owner might have uninstalled it) unless there is some special way of searching for it? Where would it normally be located?

Toshiba Satellite C850-F12S Function Keys not working

I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

Hi Eldorado
Thanks for your suggestion. Have done as you said but still have the problem.
I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
Cheers
David

Fn Key not working on vista (model - Satellite A215-S6816)

For some reason my Fn keys does not work on my laptop. When presses, the light comes on but the little window that pops up is no where to be found. I have used my recovery CD the download TVAP, it did now work, tried the utility online ( Toshiba Value Added Package for Windows Vista (v1.1.14 r3; 03-05-2008; 79M), that did not work, tried Toshiba Assist for Windows Vista (v2.01.05; 09-18-2007; 3M), that also did not work. I am not sure of what's going on. Can someone please help me with getting my Fn keys to work? I am game for any suggestions.
Thanks.

Try this Toshiba Flash Cards Support Utility for Windows Vista.

Satellite A200-19L - TV-OUT not working

I have Satellite A200-19L (PSAEC) with nVidia *GeForce Go 7300.
The laptop came with Windows Vista Home. I downgraded the system to Windows XP
Professional with SP2.
Everything its ok except the fact that now I cannot connect the computer with my TV (I used to connect with _RGB-RGB_ cable, my TV has RGB slot, TV is a Samsung LCD). With Vista it was very easy to connect but now I cannot. And now I have this problem. I cannot to do this connection.
I installed the forceware 156.55 and my driver version is 6.14.11.5655.
If anyone knows how I can do this connection please reply.
It will be _helpful._

Hi
Im not 100% sure if my advice will help you to solve this issue but generally you should update the BIOS to the XP version if you want to use the XP on this Vista unit.
Furthermore you should install all Toshiba drivers in the right order
Then you should be able to use the FN+F5 button combination which helps to switch to the external display device like second monitor or TV.
Bye

Satellite A350-214 media keys not working

After upgrading from Vista to Windows 7 the feather touch media keys are not working.The bluetooth perpheral device drivers are also missing.Pl help...

Try downloading the Windows 7 drivers. You can get them from here:
http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_32_cae.htm
The buttons are controlled by Toshiba Value added software. There is a bluetooth stack you may need to install. You may want to add the rest of the windows 7 drivers. The display and sound drivers will give you additional HDMI support that the native driver does not support.
Good luck

Re: Satellite P305-S8820 - FN key not working after clean install of Windows 7

I have a problem with a Satellite A210-103. After installation of Toshiba Value Added Package (Flash Cards Support Utility not available for A210), reboot, restarting Toshiba Flash Cards and pressing the FN key several times the problem still exists.
It must have other reasons why so many user have problems with the FN keys.
John

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

Satellite A665-14G - FN key not working

Hi,
I recently bought a Satellite A665-14G, everything was working fine.
Then suddenly the next day of the purchase date, the keyboard was not illuminated.
So I pressed the FN + Z keys combination, and nothing happened.
I tried to press other FN key combinations and none worked.
So i'm assuming that the FN key is no longer working.
What could have caused this and how can I restore its functionality?

Hi
Do other FN + F buttons work correctly?
For example FN + F6, FN + F7 and so on.?
If yes then the FN buttons are OK and I think only the illumination has been disabled.
Usually in BIOS you can enable and disable the illumination.
Check this!
But if other FN buttons dont work, then you should reinstall the VAP (value added package) and Flash Card Support Utility.
Both tools can be downloaded from Toshiba driver page.

Satellite A200-PSAE6E - FN key not working on Vista 32bit

Similar Messages

Maybe you are looking for