Satellite A200 (PSAE6E) - Unable to recognize WLAN driver

Hi
I have a Satellite A200 PSAE6E with Vista.
I just want to install WXp and erase Vista.
When Xp was installed, all is Ok, except that my computer refuse to recognize my Wifi card...
Always the same, after boot sequence, desktop windows appeared, and a message : New material detected...
When I decide to make automatic research and install...............nothing.
When I look in the control panel >>>>> device manager
In rubric " Other Device" appears : Network Controller with a yellow !
And impossible to find a good driver....
In the properties , detail sheet it is written :
PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
I download all the drivers from toshiba download center (for XP) and i try also to download Intel drivers............... NOTHING....
Please if someone can help me....
François

Hello
Thanks for this information, yes i forgot to update Bios version to the Win Xp version.
Secondly with this string :
PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
I identify my Wifi card like Intel : Intel Wireless WiFi Link 4965AGN(supporting 802.11a/b/g/Draft-N)
Found here : http://www.pcidatabase.com/search.php?device_search_str=4229&device_search=Se arch
But when i try to install Intel driver .... nothing mater ...it doesn't work (it's saying : "The driver installed doesn't work" "Error code 10")
So unable to recognize my Wifi Card ....

Similar Messages

  • Help to find the driver of controller HDD on Satellite A200 (PSAE6)

    Greetings. This text has been written through a translation program, try to understand :)
    Problem:
    My friend has bought couple of days back to itself TOSHIBA Satellite A200 (PSAE6) where it has been established OS Windows Vista Home. It has asked me to change OS on Windows XP Pro. With the first problem I have consulted - have removed Vista, but to establish XP it is not possible because of absence of the driver of controller HDD in distribution kit OS. Windows Installer cannot find HDD. I read that it is necessary to load this driver during installation, pressing of key F6. But a problem that I cannot find the driver in that.
    We do not have disk with drivers which should go complete with a computer and consequently it is necessary to search independently on the Internet. On site Toshiba to find the driver it was not possible. Then I have come on site Intel and download "RAID/AHCI - Intel® Matrix Storage Manager ". Having unpacked I have received archive only "infinst_autol.exe".
    Question:
    Where I can download such driver (not a format "EXE") which can be used at installation WinXP?
    PS: a chipset - Intel PM965 Express
    Thanks

    Intel matrix storage manager from Intel download web.
    Find your chipset, download and run. It will install in some dir. drivers.
    Must remember that you will must made your own XP installation with drivers.
    enjoy

  • Satellite A200-PSAE6E: I want to use Windows 7 - What drivers should I use?

    I have a Toshiba Satellite A200-PSAE6E, and now i want to use Windows 7.
    Only i have a question if the drivers are supported, and which BIOS i need to use

    Hello
    As Jeffrey said you should use the BIOS for Vista.
    Vista is more similar to Windows 7 as XP so I think this would be the better choice.
    First you can try to install the drivers for Vista. Maybe it works and all Vista drivers you can download on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    If the drivers dont work you must search on external websites. Maybe there you can find another Vista driver or already a driver for Windows 7 but I believe these drivers are beta versions too.
    I hope you will be successful and post your result. It could be interesting for other Toshiba users. :)
    Greets

  • Satellite A200-1vp with Vista - CD/DVD drive failure code 39

    Hi,
    I have been burning and watching DVDs on my Satellite A200-1vp, with vista, since February, the last time I burned anything was a couple of weeks ago.
    Suddenly there's a problem, no response when I load a disc and my divx player tells me no recorder found.
    When I search in the device manager I get the message " windows cannot load the driver for this hardware" (code 39) " driver is corrupted or missing".
    I tried uninstalling it and using the Toshiba upper/lower limit filter repair tool but on restart it still failed to install.
    Should i try the Toshiba Recovery Disc and loose a lot of unbacked up programs/files, as last resort?
    Would that work?
    Anybody got any ideas?

    Here is an interesting Microsoft knowledge article:
    http://support.microsoft.com/kb/270008/en-us
    You should firstly access the device manager and should remove the CD/DVD drive from the device list.
    Then should access the registry and should remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and check if the CD/DVD drive would work again!

  • Satellite A200 (PSAE6) - Question about Windows 7

    Has anyone tried installing Windows 7 32bit on aSatellite A200 PSAE6 and using toshiba flash cards and also toshiba value added package?
    Thank you

    Hello
    No, I dont have tried Windows 7 and the Toshiba utilities on Satellite A200.
    But why do you ask this? You can test it by yourself and then you can report us your experience.
    I dont use Windows 7 at the moment because its not a final version and can cause some problems or maybe not compatible with some software applications.
    With Vista and XP Im on the safely side.
    Greets

  • Satellite A200 PSAE6E: Controller code 28 in device manager after Win7 installation

    I have the same problem! I have an A200-PSAE6E with Windows 7. My device manager shows me a perfect SDA Standard Compliant SD Host Controller under SD host adapters. But it has a certain Mass Storage Controller, under Other Devices, and that one doesn't have a driver installed (code 28). I try to update it, but it doesn't find anything.
    Here on Toshiba's website I can't find the drivers for the card reader either. I think it's Card Reader Controller (there is a Flash Card Support Utility, but I'm almost certain it's the other one)
    There is a Card Reader Controller driver for Windows Vista 64, but my Windows 7 is 32. Do you think I should try that anyway? Do you think perhaps Toshiba won't even release a driver for that?

    > Here on Toshiba's website I can't find the drivers for the card reader either. I think it's Card Reader Controller (there is a Flash Card Support Utility, but I'm almost certain it's the other one)
    If you would click on More Info which is on the right of the driver page, then you could find all details about the drivers.
    The Flash Card Support Utility is not driver but utility (the name said everything) and this utility controls the FN buttons.
    Visit the Toshiba European driver page and choose your notebook model.
    Then try the Vista 32bit driver called Flash Media Driver (dont mix it with Flash Card Support Utility). The Flash Media Driver v 2.0.0.6 is for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.

  • Satellite Pro 6000: Cannot find correct WLAN driver

    Hi,
    I have re-installed Windows Xp on my notebook Satellite Pro 6000. All is working except for the wireless connectivity.
    When looking in the device manager, I see that the WLAN driver has not (or incorrectly) been installed.
    So looked at the Toshiba site for the corresponding drivers, but I am not able to find the correct one. I did found some drivers, which seems to be the one, but unfortunately after installing the drivers, the wireless connectivity is still not available.
    Any help would be appreciated.
    Thanks in advance.
    Regards, Robert

    Hi
    I dont believe that you cannot install the Wlan driver.
    Go to the device manger and find out which Wlan card was installed. (check properties)
    If the WLan card is placed under network adapters so the driver was installed properly.
    But if you see a unknown device in device manager so you need the WLan driver.
    Then download the WLan driver from the Toshiba site. Be sure that you use the right driver for the right OS!
    You can try firstly to uninstall the old driver and then to install the new one.

  • FN key display icon does not appear on Satellite A200 (PSAE6E)

    Hello
    I have Satellite A200, I have reinstall Windows but now if I hold the Fn key the icons doesnt show up on desktop, FN keys are working fine.
    I just want to see the icon as well I have try to install every Toshiba Utility none worked.

    Hi!
    Do you use Windows XP or Vista?
    For Vista you must install the Value Added Package.
    For XP you must install the Hotkey Utility.
    Both you can find on the Toshiba website: http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    If you have more questions, please let us know.
    Bye

  • Re: Satellite A200 (PSAE6) - need drivers for FN functional keys

    j have toshiba a200 psae6 and j want drivers for functional keys f1 ....f12 ,and drivers for finger sensor...yesterday j reinstal my laptop,and now j have problem with this drivers...j download fingersensor from support page but doesnt work..windows 7 x 32 is on my comp...sorry for my bad english...

    Hi
    What Windows OS do you use?
    If you use Win XP then you need to install Common Modules.
    If you are using Win 7 or Vista then you have to installed VAP (value added package) firstly and then Flash Card Support Utility!

  • Satellite A200 (PSAE6) - need drivers for FN functional keys

    please give me a link for this driver.j have windows 7 x32 bits on my laptop a20 psae6...a reinstal operative sistem,and again instal driver and doesn t work....my sensor is not working ...

    Hi
    You need to download the VAP (value added package) and Flash Card Support Utility.
    Both tools are needed to get the FN buttons working in Win 7!
    Ive got A210. Its a similar notebook series and Ive chosen the drivers which are released for Satellite L500 series.
    Both tools worked for my A210

  • Satellite A200 - start up freeze and display driver stopping

    Hello, I have a few issues with my A200 laptop which is approximatley 3.5 years old.
    The most serious problem is that the computor, most recently takes up to 3 attempts to get it to run. or shuts down of it's own accord even when plugged in, this doesn't happen regularly but often enough to be a big pain in the prevurbial, especially when in the middle of an assigment ( yes I frequently back up), the fan appears to be working ok. I'm not sure if there is a driver problem that isn;t showining when I run a diagnostic through toshiba pc diagnostic or device manager or microsoft diagnostic or a direct driver update (which has never been required). my main line of thought is that there is a problem with memory or file extension.
    Q1 Can file extension errors cause this problem? how do I solve file extension problems without spending any money- if possible?
    When I connect an external display quite often the display driver stops working often reesulting in a complete freeze requiring either the use of task manager or a reset by turning off the computor and rebooting- bad news really.
    Q2 how can I remedy this?
    I have updated the bios and have all current required updates.
    Any pointers,help etc would be greatly apecieated.

    Hey,
    To be honest I dont know why you think about file extensions If your notebook shuts down itself it could be an overheating issue. The notebook would shut down to protect the hardware.
    Have you ever clean your notebook before? If you have it already for 3.5 years there is a lot of dust in cooling ventilators so use compressed air spray to blow the dust.
    Regarding your second question: Have you installed newest display driver from Toshiba driver download page? This is important because the Toshiba display drivers are pretested and designed for this model. So they would work properly and dont cause any problems.
    I hope I could help you a little bit ;)

  • Satellite A200 - I need Texas Instruments flasmedia driver

    Hello, I have install Vista Home Premium 64-bits in my laptop and I need a Texas Instruments PCIxx12 Integrated FlashMedia Controller.
    I dont know where I can find it.
    Can anyone help me to say where I can find this driver?
    Thanks

    Ola JOSE
    Please check firstly your A200 model number because there are different Toshiba A200 models.
    But as Joey already said the Card Reader Controller driver is available on the Toshiba European driver page and after the installation your internal card reader should run using the Vista 64bit.
    Mucha suerte ;)

  • Satellite A200 PSAE6E: no HDD while XP installation

    Hi Vandeven,
    I have the same Laptop as you are, but I have having difficulty getting the Windows XP to recognise the hard drive.
    It keep on saying there is not hard drive detected.
    I don't had a Floppy Drive neither.
    Is there another way to install Windows XP without the SATA Driver?
    My bios is 2.10 and I can upgrade to another bios it won't let me. Keep on saying wrong Bios!!. But is not.
    Please help as I am sick and tried of Windows Vista...
    Slow and incompatible programs.
    Many Thank in advance.

    Why you dont use the forum advanced search option and search for the similar threads?
    The SATA driver installation doesnt concern only the A200 series.
    On most new notebook series the SATA driver installation is necessary.
    Anyway if you would use the search option then you would find this Toshiba document:
    [How to integrate a SATA AHCI driver in a Windows XP Setup CD|http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]
    Greets

  • New MacBook Pro 15" unable to recognize Hard Drive connected by thunderbolt cable

    We have three macs in the house and recently purchased a new MacBook Pro 15" with two thunderbolt connections.
    I have a 4TB Seagate HD that has been partitioned into 4 1 TB drives all formatted for MAC OS.  Each Partition is being used for a separate time machine capsule and when I hooked up the new Mac I got that the disk was not recognized and has to be initialized. 
    Since the other two macs read it fine I'm not sure that this is a problem with the actual hard drive itself.
    I rebooted the New Mac and installed all the updates, but am still having the problem.  It is seeing the drive, but only as 1 4TB partition that needs to be formatted.
    Is this a problem with the new mac or is there a simple solution.
    Thanks

    Sorry my english is not perfect.
    I didn't say to turn off the fans. I say you have to increase the speed of yours fans to 3000 rpm, for you realize the intensity of noise emitted by my hard drive. I would like your opinions if my hard drive is normal or not ? I think not, because the noise is very hard, but I would like a confirmation.
    Thanks

  • Re: Satellite A200 PSAE6E: Cannot install Flash Cards - invalid serial number

    PLEASE I CAN'T INSTALL THE FLASH CARDS SUPPORT UTILIY, ALL THE TIME AT THE END IT SAY'S
    "THE SERIALNUMBER IS INVALID"
    PLEASE I NEED YOUR HELP TO INSTALL
    FN KEY IS NOT WORKING PLEASE HELP ME. WHAT CAN I DO PLEASE ?
    I'M USING VISTA HOME BASIC 32 BIT
    PLEASE I NEED YOUR HELP.
    Message was edited by: niijosh

    Hi, I had a similar issue on Sat Pro A200 PSAE7E. wrote to Toshiba support and got the following reply (in July) - never heard from them again but the older Canadian version worked for me:
    Thank you for emailing Toshiba regarding your issue with Toshiba Flashcards.
    The issue you have highlighted is currently being investigated by our level 3 team because unfortunately, you are not the only customer affected by this problem.
    The only alternative we can currently suggest is to download and install the Flashcard Utility update from our website in Canada. This has been found to resolve the issue in most cases. The web link for this update can be found here:
    http://209.167.114.38/support/Download/files_Downloads/psae6c/TOSHIBA-Flash-Cards-Support-Utility.zip
    If you wish for further support with this issue, please feel free to contact us by email again or call in to our Technical Support department on the number shown below. However, we would like to point out that this issue is being worked on and that a solution should be provided soon.

Maybe you are looking for

  • Iphoto, slow import problem from SD

    Hallo to everyone, I have a strange problem since I have have update Iphoto '11 a few day ago. When I insert the SD card, the icon appears in finder and Iphoto loads, BUT the icon of the SD card in the program need much more time to appears, 2 o 3 mi

  • New EFI Firmware update v 1.6

    This update improves the stability of MacBook Pro computers and addresses issues with sleep-wake, USB and device compatibility. has any one installed this yet? any fixes noticed?

  • Using Crystal Report

    Is it possible to use crystal reports in Java application. If anyone has ideas plz suggest how to do so.If not ,plz suggest any other tool which provides features comparable with crystal report

  • Replacement WiFi USB with 802.1x support

    My WiFi died recently, and now I need a replacement WiFi adapter. I found that none of the wifi usb were actually listed to be compatible. My school uses 802.1x, so that is a mandatory feature. Also, the wifi adapter has to have decent range. I would

  • Problem in Creatig the URL iview for a Team Room

    Hi SDN, <b> I have created a team room in collaboration and created the URL iview of that team room. But in the iview i am getting the MASTHEAD of the portal also. But I do not want the MASTHEAD to appear. HOW DO I GO ABOUT THIS?????? </b> regards Br