Satellite A200 PSAE6E won't power up after BSOD

Hi. (sorry for my english)
Last night i got BSOD (driver_IRQ_NOT_LESS_OR_EQUAL). After memory dump i restart notebook but it won't power up.
Fan start for 1-2 sec., i can hear some noise from DVD drive, power light is blue, same as power cord light, battery light is dark when notebook is unplugged from AC.

> {quote:title=Al-eX wrote:}{quote}
> hi keeslaff,
> take out battery and run the unit on ac-adaptor.
Already did that, same result
> check if hdd spins up (maybe hdd died)
i think it's spins (at least trying to spin)
> try to boot from a dvd/cd (install dvd of win)
can't do that, in BIOS first boot dev is HDD and i can't change it
i'll try to play with memory sticks if i find any screwdriver
Tank you
Message was edited by: keeslaff

Similar Messages

Satellite A200 (PSAE6E) - Unable to recognize WLAN driver

Hi
I have a Satellite A200 PSAE6E with Vista.
I just want to install WXp and erase Vista.
When Xp was installed, all is Ok, except that my computer refuse to recognize my Wifi card...
Always the same, after boot sequence, desktop windows appeared, and a message : New material detected...
When I decide to make automatic research and install...............nothing.
When I look in the control panel >>>>> device manager
In rubric " Other Device" appears : Network Controller with a yellow !
And impossible to find a good driver....
In the properties , detail sheet it is written :
PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
I download all the drivers from toshiba download center (for XP) and i try also to download Intel drivers............... NOTHING....
Please if someone can help me....
François

Hello
Thanks for this information, yes i forgot to update Bios version to the Win Xp version.
Secondly with this string :
PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
I identify my Wifi card like Intel : Intel Wireless WiFi Link 4965AGN(supporting 802.11a/b/g/Draft-N)
Found here : http://www.pcidatabase.com/search.php?device_search_str=4229&device_search=Se arch
But when i try to install Intel driver .... nothing mater ...it doesn't work (it's saying : "The driver installed doesn't work" "Error code 10")
So unable to recognize my Wifi Card ....

Satellite P10-304 Won't power up now

Hello,
Got Satellite P10-304 machine which won't power up after 2nd attempt. What happened:-
Machine powered up from cold start - booted up Window XP ok. After 5 -10 minutes, machine screen went dimmed (looks like backlight have gone) and couldn't power off machine by pressing power button, so had to remove the battery pack to kill the power into machine.
Now, machine won't power up (even battery pack fully charged), When I pressed the power button, I do get a orange light flashed once inside the blue light circle area around power button.
Leave machine powered off for about 1 hour and machine started up in BIOS screen and then after 3 mins screen went dimmed again. Machine won't start up again! Checked AC adaptor and getting 19.3Volts and 6.1Amp so power supply unit ok.
Sounds like the motherboard is playing up and needs replacing? Dose anyone come across this problem before?
Many thanks

Hello
> Sounds like the motherboard is playing up and needs replacing?
Yes, it seems so :(
Maybe its not the mainboard but another hardware part. But to be honest you should go to an authorized service provider. The technicians can check the notebook to determine what is exactly wrong.
And here you can search the nearest ASP:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
Greets

Help to find the driver of controller HDD on Satellite A200 (PSAE6)

Greetings. This text has been written through a translation program, try to understand :)
Problem:
My friend has bought couple of days back to itself TOSHIBA Satellite A200 (PSAE6) where it has been established OS Windows Vista Home. It has asked me to change OS on Windows XP Pro. With the first problem I have consulted - have removed Vista, but to establish XP it is not possible because of absence of the driver of controller HDD in distribution kit OS. Windows Installer cannot find HDD. I read that it is necessary to load this driver during installation, pressing of key F6. But a problem that I cannot find the driver in that.
We do not have disk with drivers which should go complete with a computer and consequently it is necessary to search independently on the Internet. On site Toshiba to find the driver it was not possible. Then I have come on site Intel and download "RAID/AHCI - Intel® Matrix Storage Manager ". Having unpacked I have received archive only "infinst_autol.exe".
Question:
Where I can download such driver (not a format "EXE") which can be used at installation WinXP?
PS: a chipset - Intel PM965 Express
Thanks

Intel matrix storage manager from Intel download web.
Find your chipset, download and run. It will install in some dir. drivers.
Must remember that you will must made your own XP installation with drivers.
enjoy

Satellite A200-PSAE6E: I want to use Windows 7 - What drivers should I use?

I have a Toshiba Satellite A200-PSAE6E, and now i want to use Windows 7.
Only i have a question if the drivers are supported, and which BIOS i need to use

Hello
As Jeffrey said you should use the BIOS for Vista.
Vista is more similar to Windows 7 as XP so I think this would be the better choice.
First you can try to install the drivers for Vista. Maybe it works and all Vista drivers you can download on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
If the drivers dont work you must search on external websites. Maybe there you can find another Vista driver or already a driver for Windows 7 but I believe these drivers are beta versions too.
I hope you will be successful and post your result. It could be interesting for other Toshiba users. :)
Greets

Aluminium iMac won't power up after shutdown

Hello All,
I have bought a 20" aluminium iMac for my parents a couple of weeks ago. It went extremely well in the first few days, but I got the complaint from my parents that it cannot power up after the proper shutdown.
It is very strange that it won't power up after it has been shutdown for a couple of hours, unless I unplug the power cord and plug it back in after a minute or so (reset the SMC)
Oppositely, I can power it up normally right after it has been shut down for a few minutes. But never overnight.
I have tried everything I know about like reset SMC and PRAM, as well as running apple diagnostic. Symptom still persist (though the diagnostic says nothing wrong with my hardware)
Is there anyone facing the same problem as me ?
Thanks
Jimmy

Thanks Guys.
I haven't called Applecare yet. However, I have reinstall the system and done a software update EXCEPT the latest imac software update v1.1 released recently.
See if anything good happen tomorrow and will let you guys know
by the way, it's really great that Mac retains everything including the Apps and Desktop setting after the reinstallation......... nothing has to reinstall except the OS itself
Jimmy

Satellite A200 PSAE6E: Controller code 28 in device manager after Win7 installation

I have the same problem! I have an A200-PSAE6E with Windows 7. My device manager shows me a perfect SDA Standard Compliant SD Host Controller under SD host adapters. But it has a certain Mass Storage Controller, under Other Devices, and that one doesn't have a driver installed (code 28). I try to update it, but it doesn't find anything.
Here on Toshiba's website I can't find the drivers for the card reader either. I think it's Card Reader Controller (there is a Flash Card Support Utility, but I'm almost certain it's the other one)
There is a Card Reader Controller driver for Windows Vista 64, but my Windows 7 is 32. Do you think I should try that anyway? Do you think perhaps Toshiba won't even release a driver for that?

> Here on Toshiba's website I can't find the drivers for the card reader either. I think it's Card Reader Controller (there is a Flash Card Support Utility, but I'm almost certain it's the other one)
If you would click on More Info which is on the right of the driver page, then you could find all details about the drivers.
The Flash Card Support Utility is not driver but utility (the name said everything) and this utility controls the FN buttons.
Visit the Toshiba European driver page and choose your notebook model.
Then try the Vista 32bit driver called Flash Media Driver (dont mix it with Flash Card Support Utility). The Flash Media Driver v 2.0.0.6 is for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.

Iphone won't power on after screen replacement

So I've dropped my Iphone 4S once and screen showed blue vertical lines. I replaced the screen for about $120. After 6 months or so I dropped it again and the screen cracked. I decided to replace the screen on my own so I got a new one and replaced it, but the phone doesn't power on after the screen replacement. I plugged it on charger, did a hard reset but still nothing. I plugged it on pc and it was recognized by the itunes! As it was plugged on pc, I did a reboot again and it left itunes as if it was powered on and suddenly powered off. Still plugged in I tried to power it on again, it was recognized again by the itunes but the screen still wasn't working. Another thing is that it burns a lot without even being on charger or on pc, and I need to take the battery off.

Sorry. There's not much we can suggest. Apple won't touch that phone now.
Try looking for advice someplace like ifixit.com.

My mbp won't power up after update.

after running an app store update, (Xcode) my mbp won't power up and the battery lights are showing flat even though it was on charge over night.
the update was taking a long time, and it had a message saying something like deleting old files.
i went to bed and left it over night.
when i went back this mornng it had powered down, and the drained the battery even though it was plugged in.
now i can not power up, and i have tried the smc reset.
please help.
many thanks.

This is the standard Apple support article for your situation. If you cannot try another adapter to try, I suspect a trip to an Apple store genius bar is in your future.
http://support.apple.com/kb/HT3964
Ciao.

Satellite A200 (PSAE6) - Question about Windows 7

Has anyone tried installing Windows 7 32bit on aSatellite A200 PSAE6 and using toshiba flash cards and also toshiba value added package?
Thank you

Hello
No, I dont have tried Windows 7 and the Toshiba utilities on Satellite A200.
But why do you ask this? You can test it by yourself and then you can report us your experience.
I dont use Windows 7 at the moment because its not a final version and can cause some problems or maybe not compatible with some software applications.
With Vista and XP Im on the safely side.
Greets

Rand new iPhone 5s black, dead, won't power up after ios 7 upgrade...held down top button, held down home button...dead. Was fully charged, working fine tell said yes to upgrade. HELP!!!

Brand new iPhone 5s dead, black won't come on after ios update...is fully charged, was working fine till said yes to upgrade. Did not watch process beyond seeing Apple logo appear, left it alone, came back, dead. Tried holding top button, tried home button, nothing...HELP!!!

If iTunes does not recognize your iPhone even if it’s plugged in, you may need to put it into DFU (Device Firmware Update) mode. If you have to put the device in DFU mode, you will most likely be unable to back it up.
Hold Power button for 3 seconds and then the Power and Home together for 10 seconds (exactly).
Release Power but keep holding home until the your iPhone shows up in iTunes.

Satellite A200-1M8 - battery loose power quickly

Hi
Please I need help... I have got Toshiba Satellite A200-1m8.
Operating system: Windows XP Pro SP3.
I noticed that the Wireless connection, running the laptop on battery power, drops and sometimes doesn't connect but plugging the power back to Normal power it easily does
I searched for similar issues and found that Intel for wireless devices does this to save battery power. I followed the instructions I found, and Wi-Fi worked well by increasing the power management in the Wi-Fi device settings ,but the main problem here is when I increase power management ,running the laptop on batteries, the computer seemingly to lose battery power quickly.
Should I change the deficient part by the manufacturer or what to do .......??
Thanks.

Hi again bro Horwath and sorry for being late.
Actually i'm still not sure/precise about testing the battery power while knowing what is running on the background. It is somehow confusing to keep on watching precisely.
Anyway here is what i came up with:
But before that the toshiba power saver settings that i use on battery is 3/4 towards the high preformance ( less long battery life ).
(every thing is the same as the default battery power profile except those: no hibernation..no system standby.. no Hdd power off and monitor off in 30 minutes)
first test:
the overall battery useage seemed to last between 1:20 or 1:30 hours.
running internet explorer with 3 to 4 websites in the same window....winmap....and [2 msn messenger (background) ]
it seemed that i lost 2% within 2 to 3 minutes ( but i still feel it is rapid ).... then leaving the computer idle seemed to have lost like 1% within 3 to 4 minutes.
second test:
The overall battery useage also seemed to last between 1:20 or 1:30 mintues.
i was running adobe photoshop for some minutes .....[ with msn messnger ( background ) ]
consumed like 60% of the battery power whithin like 40 minutes...
and the rest was left to the computer being idle just running 2 msn messnger on the background and consuming 40% within 30 to 35 minutes.
I also noticed that battery consumes 2% quickly on computer usage or apparently on _wireless internet usage_
Those are what i noticed, but still not sure 100%.
Anyway besides that my battery should last for 2 hours as i saw in some websites for this toshiba model .
In addition, why shouldn't the wireless device run normally like on any other computer on the default/normal level of power management so that i can have the normal battery power life.
Sorry for the complications in here :S.
thanks.

KT3v MS6712 System Won't power up after RAM upgrade

hello this is my first posting to this forum and I hope someone might be able to help on this as I am totally stumped. I have been running my KT3V MS6712 mobo with 256MB since it was built. The manual for this mobo says it can handle up to 3GB RAM in any order or size. I have 3 DIMM slots and thought it would be more cost effective to just
purchase 1 DIMM leaving the other 2 slots free. So I decided to upgrade to 1GB and I bought a Kingston 1Gb PC2100 266MHz DIMM and installed it on my system. Now my system won't power on at all. When I press the power button on the PC, the CPU fan spins for like 1-2 seconds then stops. The system appears to be completely dead. Cos I thought the problem was down to the new RAM installation I thought better put my old 256 DIMM back, however I still get the same problem. I have tried swopping both DIMMS into different slots but still doesn't work. The system was working fine until I did the RAM upgrade. I tried resetting the CMOS by moving the jumpers around in case it was a BIOS issue, still hasn't made a difference. Dunno if its the PSU which has suddenly gone, however seems strange. There are no beeps from the system or lights flashing to indicate anything. I don't have
the D-Bracket installed either. I have also never upgraded the BIOS on this system as it has always been stable. The CPU is not overclocked. Has anyone had this problem before after a RAM upgrade? Hope I have given you enough information

Suntek is perhaps not the best of PSU makers, but a sudden collapse is not so common. You normally notice problems earlier.
I took a big beating last time I said this , but it is important that there is no power in the system when changing memory sticks.
It sounds a bit like the processor went away for holiday. Have you any data on the processor temperature? Is there any activity at all? Does the processor heat sink get warm?

Airport won't power up after updates 5.5.2 and 7.5.2

I updated this afternoon via Software Update: Airport Utility (to v. 5.5.2) and Airport Extreme firmware (to v. 7.5.2). Everything seemed fine, noticed no problems and later I shut down my main computer for the day.
When my wife came home later, she couldn't get an Airport connection on her MacBook Pro. In the process of troubleshooting, I went back to the Base Station and found it was off (no light at all). It simply won't power up at all. Unplugged it, replugged it, etc.
Seems like too much of a coincidence that my unit would have just flat-out died after these updates.
Anybody know what's up?

Thanks Bob, I'm afraid you're right. I didn't know that a firmware update could fry hardware like this! It's just too much of a coincidence to be a... well, coincidence. (Especially now that I see all the other people having problems today after this update.)
I've also reported the issue to Apple via the link you posted in another thread: http://www.apple.com/feedback/airportextreme.html

Won't power on after checking battery for exchange program

This is so silly its not even funny.
I simply shutdown my 12" 1.5Ghz power book. Took the battery out to read the serial number, which by the way is one of the faulty ones. Then put it back in and now it won't power on.
Pressing the power button does nothing. Battery is fully charged, with AC connected it has the green light. Trying to power on with only battery, only AC has no effect. Resetting PMU, NVRAM unsuccessful.
Help! What could have possibly happened?
The warranty expired in May but I'm confident if I didnt have to check the battery I wouldn't be facing this problem. Do you think Apple will take pity on me?

If I have the battery out, if I hold the power button then when I plug in the AC I hear something like a capacitor discharging for about 2 seconds. Kinda like something spinning down.
Ring any bells?

Satellite A200 PSAE6E won't power up after BSOD

Similar Messages

Maybe you are looking for