Satellite A200: Slow WLAN speed with Atheros AR5007EG

Hi there,
I recently bought an Satellite A200 with an Atheros 5007eg wireless lan adapter. I am using Vista. And i'm using a d-link router.
My problem is the following:
Somehow, when I download it only produces 1/4th of the speed I get when i connect it directly to my modem... Ive tried downloading new drivers, but no help there.
Can someone help me pls? I already talked to toshiba NL, they told me to send it to them, they had it for three weeks and then sent it back without doing anything.

As far as I know an BIOS and the Atheros driver update should clear this issue.
A friend of mine has the same notebook and he has updated the both mentioned thing and it works great.
The BIOS update you will find on the Toshiba European driver page and the Atheros WLan driver here:
http://aps.toshiba-tro.de/wlan/
Bye

Similar Messages

Very slow download speeds with ATT U-Verse

Hello,
Experiencing very slow download speeds with Macbook Pro 2011, on Lion, and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
Any suggestions welcome!
Thanks

Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

Satellite Pro A200 PSAE4E - WLan speed regularly drops out

Hi
Does anyone know what causes my laptop to lose wifi on a regular basis? It is a Satellite Pro A200 PSAE4E running on XP. I purchased the laptop new back in February and it came with Vista loaded but the wifi kept dropping out and was advise to swap to XP as it was more stable.
When the wifi drops, the Wirless Connection Icon disappears completely from the sys tray as though it never existed although the wifi light just under the front edge remains on. Looking in the network connection in the control panel the wifi is not listed.
I have to shut down the laptop and reboot so that I can carry on working online.
I've downloaded the latest driver for the Atheros AR5007EG and I rang Toshiba support.
Anyone got any ideas - I'm disappointed with the performance of the WLan.

Ive got the same model, and had the same issue with the Wireless Card today (otherwise its been fine for 4 months). I was confused by the card not appearing in the device manager - like it was totally wiped from the system. I rebooted a few times and it did still not appear.
Left the laptop and did something else for a while, and on rebooting the card reappeared and the Wireless connection was remade.
I also have the same question: What causes all trace of a device to disappear - rather than the card to be shown but with an exclaimation mark showing there was some sort of conflict which might help us to sort the cause of the problem.
Have you had any help from anywhere else?

Very slow transfer speeds with external hard drives through Firewire and US

Hi All,
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little. Apple support suggested I post my issue here. Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
Thanks in advance.

Hi Kappy, thanks for the information.
So I rejigged my setup a tad. My RAID 0 is still FW800, the second drive is back on FW400 on the back port, and the third is USB 2.0 on the back as well.
It's interesting to note that I saw the FW800 taking a bandwidth hit if the FW400 drives was being read/written to. For example, if I was averaging 50-60MB/sec on the FW800 drives and copy something large to the FW400 drive, each drive averages out to about 30/MB second, roughly half the FW800 speed I was getting. The USB while the slowest didn't cause any slowness on the FW drives.
Here are my Xbench results. These results are from each drive being benchmarked individually with no other drives being tested at the same time.
*MyBook 2TB in a RAID 0 configuration: Firewire 800*
Results 75.42
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD My Book
Disk Test 75.42
Sequential 80.92
Uncached Write 69.16 42.46 MB/sec [4K blocks]
Uncached Write 110.79 62.68 MB/sec [256K blocks]
Uncached Read 53.66 15.70 MB/sec [4K blocks]
Uncached Read 136.76 68.73 MB/sec [256K blocks]
Random 70.62
Uncached Write 36.38 3.85 MB/sec [4K blocks]
Uncached Write 140.55 45.00 MB/sec [256K blocks]
Uncached Read 93.26 0.66 MB/sec [4K blocks]
Uncached Read 88.38 16.40 MB/sec [256K blocks]
*MyBook 1TB on Firewire 400*
Results 47.73
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD My Book
Disk Test 47.73
Sequential 52.47
Uncached Write 48.45 29.74 MB/sec [4K blocks]
Uncached Write 53.76 30.42 MB/sec [256K blocks]
Uncached Read 43.69 12.79 MB/sec [4K blocks]
Uncached Read 70.91 35.64 MB/sec [256K blocks]
Random 43.78
Uncached Write 17.29 1.83 MB/sec [4K blocks]
Uncached Write 98.83 31.64 MB/sec [256K blocks]
Uncached Read 76.33 0.54 MB/sec [4K blocks]
Uncached Read 97.01 18.00 MB/sec [256K blocks]
*MyBook 500GB on USB 2.0*
Results 40.60
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD 5000AA External
Disk Test 40.60
Sequential 35.99
Uncached Write 37.31 22.91 MB/sec [4K blocks]
Uncached Write 37.22 21.06 MB/sec [256K blocks]
Uncached Read 26.62 7.79 MB/sec [4K blocks]
Uncached Read 50.27 25.27 MB/sec [256K blocks]
Random 46.55
Uncached Write 20.37 2.16 MB/sec [4K blocks]
Uncached Write 68.44 21.91 MB/sec [256K blocks]
Uncached Read 93.55 0.66 MB/sec [4K blocks]
Uncached Read 86.71 16.09 MB/sec [256K blocks]
So Kappy are you saying that those speeds look normal?
Thanks

Test bed : WLC makes slow WLAN speed vs. Autonomous

Hi experts,
User complint very slow download speed (~140kbps) compare to wire around ~50mbps. Those are too different.
So I move out from the production, then did my own test.
I tested on seperated environment, seperated AP(1130)/switch/ WLC(7.0)/PC client with Windows file sharing. Then compare againt STANDALONE AP. All are flat configure without any Auth etc.
Result are, standalone AP is winner = 5MB/sec while WLC based is only 1MB/sec. Then I also try to do LOCAL SWITCHING (H REAP) to diable tunneling that could make some delay. Result is the same, no improvement.
I also find out for cisco support forum. Much many discussions ask us to disable feature such Client exclude, MFP, Aironet IE and tune for a/b/g supported.
What else to tune or aware of ?
Please do me a suggestion. Thank you.
Nipat.p

David,
Do you mean Static&Dynamic CH? I used default WLC's setting (Dynamic, DCA)?
Anyway, my testbed is using only 1 AP in 2 scenarios WLC-based vs. Autonomous at the same location.
I also asked from the others end user who is using WLC. Windows file share speed is also around 1-2.4MB/sec. So poor!!!
Then, What else for WLC parameter should I take care of? I got a slot to re-test by tomorow.

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

Slow Network Speed with MacPro

I just received 4 MacPro's with the dual quad processors. I have configured 3 for our workplace and have moved them into production. We are experiencing very slow network speeds, a test file on our server of 100mb takes 2 minutes 20 seconds to copy to the desktop. I have manually set the ethernet port to 100baseT with full duplo. The old machine is running the same OS 10.4.10, and only takes 12 seconds to copy the file. I should mention that we use DAVE to connect to our servers, both machines are running the same version of DAVE, and using a third machine I connected to both drops and the file copied in 12 sec, showing that the network is physically OK. The only difference between the two machines is that one is the intel version? Can anyone offer any thing to try?
Thanks
Message was edited by: Mark Crane
Message was edited by: Mark Crane

I am 99% sure someone else had 'slow transfer' in another thread.
Sometimes a router needs firmware update to be compatible, or upgrade the cables to cat6e, or look for a new router or switch which helped my own setup. Just look for one that says that it is "Vista compatible" actually.
http://www.thursby.com/products/dave-vs-tiger.html

Very slow download speed with intermittent halts

Need some help.
I run Apple os/x latest version and have since yesterday begun to experience constant very slow download speeds.
I have rebooted the router and I have reset it. I have tested with wireless and wired into router. No real change.
The results are below and are pretty consistent no matter when or with what computer I test it with.
This is very frustrating and I would like to know if anyone has experienced this and if there is anything I can do before calling for service.
Thank you in advance.
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [131768]
running 10s outbound test (client to server) . . . . . 5.44Mb/s
running 10s inbound test (server to client) . . . . . . 1.94Mb/s
------ Client System Details ------
OS data&colon; Name = Mac OS X, Architecture = x86_64, Version = 10.8.2
Java data&colon; Vendor = Apple Inc., Version = 1.6.0_37
------ Web100 Detailed Analysis ------
Client Receive Window detected at 359104 bytes.
10 Mbps Ethernet link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 22.89 msec; the Packet size = 1448 Bytes; and
There were 159 packets retransmitted, 288 duplicate acks received, and 394 SACK blocks received
The connection stalled 9 times due to packet loss
The connection was idle 2.01 seconds (16.75%) of the time
This connection is sender limited 35.49% of the time.
This connection is network limited 64.51% of the time.
Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: ON
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [71.100.xxx.xxx] but Client says [192.168.1.9]

Both wired or wireless.
auto - negotiate
Thank you.

Slow wireless speed with new iMac Intel- problem with 802.11g?

There IS a problem with the new Intel Mac, I have tried both the Intel iMac and the new Intel Mac mini and they both have the same problem with slow wireless speed (or rather it variates, if I do a ping to another computer on the network the speed goes from < 1 ms up to 1000 ms and then down to < 1 ms and so on). The older mac minis, my Linux boxes and my Windows PCs don´t have that problem. I have also read reports on the net and it appears that most users experiencing this problem have wireless card firmware version 101.3 (3.120.28.3) . A possible "fix" is to change to 802.11b on the router and then it works. No speed fluctuations and a stabile network! I know it is a bad solution, I would prefer to use 802.11g and get the speed. However I think this points to a problem with the drivers regarding 802.11g. I am starting up a new thread on this and those of you with problems, please try to switch to 802.11b and if it works let us make Apple aware of this.
/Tobbe

Which home hub do you have?
There is some general help at this link Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Webcam on Satellite A200 doesn't work with Windows Media Encoder

Hardware: TOSHIBA Satellite A200 (1GH) with integrated Chicony webcam.
PROBLEM:
When i using webcam by Chicony software - it's working allright (video recorded normaly).
BUT: when i closing Chicony software, and starting Windows Media Encoder (preinstalled with Vista) - when i try to select webcam as input device - error is reported "device is not ready".
This error also repeated if I select for webcam Microsoft webcam driver instead of Chicony native driver.

Hi
Download the newest Chicony driver and software from the Toshiba page and install it.
Dont forget to remove the old version.
Furthermore if you get the error message like webcam is use by another application or "device is not ready you should start the msconfig and should disable and enable the chicony webcam service and process.
Bye

Connecting a Satellite A200 to a TV with video and audio.

I have a Satellite A200 and was wondering what cables will connect it to my TV with both Video and Audio. I have an S-Video cable at the moment but I need the sound out of the TV.
Thanks.

The problem is that s-video cable doesnt transmit the audio signal but only video.
If you want to get the sound on TV you will have to use an additional RCA cable.
http://en.wikipedia.org/wiki/RCA_connector
Best regards

Slow wifi speeds with imac 3.06ghz

Hello,
So I just got my new imac 3.06ghz with 2gb of ram and I have noticed the internet speed when using wifi is extremely slow. Currently I am using a linksys wrt54G router with time warner cable. If I have my old 1st gen macbook side by side with my imac the macbook shows full signal strength on the airport and the imac shows only a few bars. If I run a speed test with them both the macbook downloads at around 1.5mb and the imac gets a blazing 51k.
Weird symptom on the imac is the blue status bar starts to load in safari, it gets about 3/4 through and then freezes and sits at 3/4 done for a few minutes. During this time images and text on the site slowly start to show up, just like if you were back on a dialup connection.
Troubleshooting that I have done:
reset smc and pram
erase and install
downloaded all available software updates
changed the channel that the router is broadcasting on
- router security is using wep and mixed b&g
- other devices that work fast with a wireless connection on the router are an iphone, xbox 360 and nintendo ds
* even tried testing with win xp and bootcamp but I haven't figured out how to get windows to recognize the wireless card yet
So i'm at the point where I'm assuming this is a hardware issue, maybe the airport antenna?
Any other suggestions?

Everyone on here that is experiencing these wifi issues with their new iMacs NEEDS to call Apple and get this elevated. I'm out of the country right now but I'm in the middle of troubleshooting this issue with Apple. I've spoken with several techs and most don't read this forum and are unaware of any widespread wifi issue with the iMacs. When I return home I will be continuing my troubleshooting with Apple on this issue. My symptoms are very similar to the ones posted in several recent threads on this issue. So far it is pointing to a software problem but I can't rule out the hardware yet. However using BootCamp I can launch Windows Vista on the same machine and surf the internet at high speed through the same Time Capsule. Also all other PC's on my home network are connecting to the Time Capsule at high speed with no hiccups. I didn't notice the problem until all the updates were loaded onto my new iMac which I received July 18th.

Satellite M100: Slow WLan data transfer with 3945ABG Intel Wlan card

Have just popped a brand new M100 with XP upgraded to SP2 onto our network and am having trouble with the Wifi.
Everything works, just really really slowly. Takes about 5 minutes to drag an MP3 off the file-server, web pages download at the speed of a dial-up modem and my beard doubles in length waiting for even a modest flash file to load.
Have tried the following so far...
- Speed is good on the ethernet cable, just not on the wifi.
- Connection speed is good on the wifi (11Mbps) and signal strength is excellent.
- All other laptops on the network are working fast
- I have updated the drivers to the latest provided by intel, no change
- I have applied all service packs and updates to XP (was a brand new box yesterday)
- Disabling various modes on the driver make no difference
- Switching off the QoS mode in the network panel doubled the trickle of data
I see from earlier posts that I'm not the only one who has had this problem with the Intel 3945ABG chips, but I don't see a solution posted. Has anyone had success is solving this kind of problem.
The data throughput is barely usable for internet access and quite inoperable for LAN filesharing or Skype.

Sounds weird. If PCMCIA WLan card gives you good speed it means that there is nothing wrong with your Internet connection, just with built-in wlan card.
You probably should use your warranty services or better yet to return it to the shop and get a new one straight away.
In my country if something brakes within a few days after purchase you don't need to send it to repair under warranty because the shop usually agrees to replace it with new one if they have it in stock.
There is one thing I think you better try: Take it to your friend who has wireless network or to the nearest free hot spot, connect to internet from there and see what speed you get.
It could be, though longshot, that your router has compatibility issues with this specific built-in wlan card.
For example I also have a slight compatibility issue between my d-link router and built-in intel wlan card, but it is about security protocols and not the speed.
Overall it seems to me that this intel wlan card is not that good.

Very slow download speed with Airport Express

Hi.
I've recently experienced painfully slow downlink (download) speed using Airport Express.
My WiFi configuration:
- main router: WRT54G connected to my provider (speed limit: 4Mbit up/down link),
- AirPort Express with WiFi N and Airtunes hooked up to stereo in living room,
- AirPort Express WiFi G and Airtunes connected to stereo on bedroom.
Second Airport is currently not used to simplify tests and description of my problem.
The problem: when connecting from MacBook to Airport Express I can't reach more than approx. 512kbit downloading from internet, usually even 300kbit, while uplink reaches easily 2.5Mbit (limited probably by my network provider). While connected to WRT54G I can get 2.5 up to 4Mbit downlink, same when using cable directly plugged in to WRT54G.
I tried changing channels, switching different options in Airport with no effect - still getting pathetic download speeds. Even worse - browsing experience is awful, with frequent slowdowns, etc.
I tried different encryption methods, and seems like only switching it off at all (unprotected network) seems to let my Airport work on full speed (2.5Mbits symmetrically up/down, up to 4Mbits - provider speed limit) - which is unacceptable, I refuse to set up and use unprotected network at home.
Problem is clearly in Airport or in interaction between Airport and Macbook. I've just ran out of ideas - can you help me?

I can't offer any help with your problem except for the fact that mine has recently done the exact same thing. It's ridiculous, for months and months it was extremely fast and then all of a sudden it takes 20 minutes to open a simple browser page. Something is definitely wrong with the airport because all other wireless internet connections from other routers are as usual. \

V. Slow transfer speeds with new dual band Airport Extreme

I have a new Airport Extreme (late 2009, dual band, full 'N' spec) which I am using to replace an older Airport Extreme (early 2008, 5Ghz, 'draft' N).
I have a USB disk attached and was interested in benchmarking the transfer speed of the new Extreme, compared to the previous version. The results are puzzling / alarming.
Shown below are transfer speeds (file copied to the attached USB drive) under different connection standards (2.4Ghz / 5Ghz & a/b/g/n)
'Old' Airport Extreme
5Ghz - 'draft' N : ~5-7 Mb/sec
'New' Airport Extreme
2.4Ghz - b/g : ~3-5 Mb/sec
5.0Ghz - a : ~3-7 Mb/sec
5.0Ghz - N : ~200 Kb/sec
Hence transfer speeds appear to collapse when I try to make use of the 'N' spec with the latest Extreme. I have tried altering items such as - wide channels (on / off), interference robustness (on / off), 5Ghz channel (manual, instead of auto), with no upside.
I seem to be at the point of concluding that either
1. I have a 'broken' Airport Extreme
2. The WiFi card on my early 2008 iMac (which implements I guess the 'draft' N standard) is 'incompatible' with new the Airport Extreme under a 'N' connection.
Any thoughts ?

Since all devices in my wireless network are capable of latest 802.11n protocol, I really do not need older and slower 802.11a/b/g protocols. To achieve above 200 Mbit/sec, 5GHz band with wide channel option turned on is really necessary. Thus I really wish I can turn off the 2.4GHz radio band (seems Apple has set this band as default) of my new dual band Airport Extreme to avoid unwanted bandwidth degradation. Unfortunately this is not possible with radio mode setting in Airport Utility.
The best I can do to force connection with 5GHz radio band (with quite consistent result) is as follows:
On Airport Extreme through [Airport Utility>Wireless] :
Radio Mode: 802.11n only (5Ghz) - 802.11b/g/n
More Options>Wireless Network Option>Transmit Power: 100%
More Options>Wireless Network Option>Use Wide Channels: checked
More Options>Wireless Network Option>5 GHz Network Name:
checked and same network name with extra suffix "(5 GHz)"
On 27" iMac through [System Preferences>Network>AirPort>Advanced>AirPort]:
Preferred Networks:
Create only one profile in Preferred Networks for the above network name with suffix "(5GHz)"
Uncheck the option [Remember networks this computer has joined] to ensure there is only one profile under Preferred Networks .
Once all above settings are done, restart Airport Extreme in Airport Utility. Your computer should connect wirelessly to the base station through 5GHz band after booting most of the time. Even when it is not occasionally, simply go to the Airport icon in main menu bar and click on the network name with suffix "(5GHz)" in dropped-down list to connect manually. With all these settings, I have achieved 300 Mbit/sec bandwidth on my iMac most of the time for fast Time Machine backup.
How I wish feature for better radio mode control by end user will be implemented in next update of Airport Utility. Apple should trust end user's brain better than artificial intelligence (or ignorance ?) in wireless network implementation. Wireless traffic between the two radio bands and among various wireless devices should be segregated specifically in Airport Utility by end users whenever dual band Airport base stations are in use.

Satellite A200: Slow WLAN speed with Atheros AR5007EG

Similar Messages

Maybe you are looking for