Satellite A200 - Touch pad doesn't work with Windows 7

Hello,
I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
I would be very gratefull for any advice.
Thanks in advance

Hi,
Yes I have no function. I have been to the toshiba site but there was no windows 7 driver.
then to synaptics and downloaded the driver restarted as promted and still not working?

Similar Messages

Satellite A200 - Touch pad scrolling doesnt working

Hello,
my touchpad scrolling doesn't work.
I tried everything what is possible. But without result.
I think it is maybe on account of a bad driver.
But, I don't know...
In device settings -> settings, I have got only two points: overview buttons
I am sorry for my english, I know that I need to improve it.. :P
Help me pls!
Thank you...

Hi
I dont know if you have installed the OS manually from the Microsoft CD or if you used the Toshiba recovery CD. Using the Toshiba recovery CD you can set the notebook back to the factory settings.
If you have installed a clean OS then you have to install the Toshiba drivers in the right order. Check the installation instruction txt file on the driver page!
Note: There are two different touchpad drivers and both are needful!
Alps Electric Touch Pad Driver - This driver allows you to set the properties and functions for mouse control.
Synaptics Touch Pad Driver - This driver allows you to set the properties and functions for Touch Pad control.
Check and install both!!!
Then you should be able to configure the scrolling again.
Bye

Since updating to firefox 9 my scroll feature on my touch pad doesn't work - help, please and thank you!

since updating to firefox 09 my scroll feature on my touch pad doesn't work. How do I fix this, please? I have a Gateway laptop. This has never happened before with other updates.
Thanks so much!!

Thank you so much for your link - unfortunately it is totally beyond my skills to understand or correct the bug as posted. I can find the touchpad icon and right click to open the options and that's about my speed. If this is a bug should I uninstall Firefox 9? Thanks so much...

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Equium A200-1VO - touch pad doesn't work but external mouse does

I had a problem with my hard drive not working this just happened over night so I replaced the hard drive no problem and rebooted the system.
All is ok but the touch pad will not work.
I have tried FN+F9 this is ok I have updated the touch pad program still not working.
Please HELP!!!

To determine if its an hardware issue or a software issue do the following...
1) go into bios (f2) and set it to default settings and save
2) insert toshiba recovery cd and wait till the menu appears
You should be able to move the mouse inside the recovery GUI, if it doesnt move then try holding function and f9 again.
If this still doesnt work then your touchpad could be faulty.
*Note* dont start the wizard to recover vista because it will overwrite your data, just cancel this if the touchpad works under this.
If not just turn your laptop off and remove the recovery disk.

The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
This should not be application dependant but a system function.
Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Num Lock Pad Doesn't Work With Fill In Forms

I have Adobe XI, running Windows * and IE 11. Num Lock key pad does not work with fill in forms. Can anyone help?

Sounds like you are using a third-party keyboard: the new Apple keyboards do not have a Num Lock key and the numeric keypad always functions as such.
If you're using a third-party keyboard, and if you installed vendor-provided software to customize the keyboard, check its preferences and also check the vendor's Web site to see if there is an updated version of the software for your keyboard.
I cannot reproduce the problem using the latest model of Apple Pro keyboard (the one that came with my computer, which is the same as your computer).
2. You might also want to state the specific keyboard and version of Excel you are using in case someone else has the same configuration and can try to reproduce the problem. I tried it with Excel from Office v.X.
3. You wrote: "* Deleted Excel Preferences"Both of them, yes?
- Home > Library > Preferences > com.microsoft.excel.plist (you may or may not have this one).
- Home > Library > Preferences > Microsoft > Microsoft Excel
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

After installing FF4 scrolling up and down with the touch-pad doesn't work on my Acer Aspire anymore.

Neither does it work to browse forwards or backwards with the double gesture. Zooming in and out works fine though.
Everything still works in IE8 and in Google Chrome.
The touch-pad uses an ALPS-driver.

Thanks, I don't have the file tp4table.dat on my computer. Currently I've reversed to 3.6 and will run it as long as it works. Really don't like 4.0 anyway... May be forced to use IE again if I don´t find anything better. Tried Chrome and worked well at first but now back and forth doesn't work there either and that's so annoying.

Webcam on Satellite A200 doesn't work with Windows Media Encoder

Hardware: TOSHIBA Satellite A200 (1GH) with integrated Chicony webcam.
PROBLEM:
When i using webcam by Chicony software - it's working allright (video recorded normaly).
BUT: when i closing Chicony software, and starting Windows Media Encoder (preinstalled with Vista) - when i try to select webcam as input device - error is reported "device is not ready".
This error also repeated if I select for webcam Microsoft webcam driver instead of Chicony native driver.

Hi
Download the newest Chicony driver and software from the Toshiba page and install it.
Dont forget to remove the old version.
Furthermore if you get the error message like webcam is use by another application or "device is not ready you should start the msconfig and should disable and enable the chicony webcam service and process.
Bye

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Touch pad doesn't work

I have a hp g60-233 nr notebook PC. Vista. Touch pad always worked til my wife plugged in her mouse now neither one works. The light is white not yellow or orange. I've tried uninstalling, tapping left coner twice, fn+prt sc,shift number lock u name it I think I've tried it from this very website. I don't no what else to try can SOMEONE please help me or is my computer shot? It keeps saying it corrupt code 39. I even did the unplugged adapter n battery n hold button for 30 sec n still nothing. Thanks

Hello Jred75,
I have read your post on how the TouchPad on your notebook is not working since plugging in an external mouse, and I would be happy to help you!
Since the error message, Code 39, in the Device Manager indicates a missing or corrupted driver, I recommend removing and re-installing the TouchPad drivers for your computer. This can be done by removing the external mouse; removing the drivers from Programs and Features, and then deleting the remaining software from the Device Manager. Once the software is removed from your computer, please restart it.
The next step is to install the drivers for your Synaptics PS/2 Port Touchpad. This should enable your TouchPad once again.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Num pad doesn't work with Excel.

The numeric pad behaves like scrolls and page up, page down buttons every time I use Microsoft's Excel. I looked everywhere but i couldn't find a way to change the pad to work with numbers. Its driving me crazy ...
G5 Dual 2.3GHz Mac OS X (10.4.4)

Sounds like you are using a third-party keyboard: the new Apple keyboards do not have a Num Lock key and the numeric keypad always functions as such.
If you're using a third-party keyboard, and if you installed vendor-provided software to customize the keyboard, check its preferences and also check the vendor's Web site to see if there is an updated version of the software for your keyboard.
I cannot reproduce the problem using the latest model of Apple Pro keyboard (the one that came with my computer, which is the same as your computer).
2. You might also want to state the specific keyboard and version of Excel you are using in case someone else has the same configuration and can try to reproduce the problem. I tried it with Excel from Office v.X.
3. You wrote: "* Deleted Excel Preferences"Both of them, yes?
- Home > Library > Preferences > com.microsoft.excel.plist (you may or may not have this one).
- Home > Library > Preferences > Microsoft > Microsoft Excel
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Satellite A200 - Touch pad doesn't work with Windows 7

Similar Messages

Maybe you are looking for