Satellite A200 - Touch pad scrolling doesnt working

Hello,
my touchpad scrolling doesn't work.
I tried everything what is possible. But without result.
I think it is maybe on account of a bad driver.
But, I don't know...
In device settings -> settings, I have got only two points: overview buttons
I am sorry for my english, I know that I need to improve it.. :P
Help me pls!
Thank you...

Hi
I dont know if you have installed the OS manually from the Microsoft CD or if you used the Toshiba recovery CD. Using the Toshiba recovery CD you can set the notebook back to the factory settings.
If you have installed a clean OS then you have to install the Toshiba drivers in the right order. Check the installation instruction txt file on the driver page!
Note: There are two different touchpad drivers and both are needful!
Alps Electric Touch Pad Driver - This driver allows you to set the properties and functions for mouse control.
Synaptics Touch Pad Driver - This driver allows you to set the properties and functions for Touch Pad control.
Check and install both!!!
Then you should be able to configure the scrolling again.
Bye

Similar Messages

  • Satellite A200 - Touch pad doesn't work with Windows 7

    Hello,
    I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
    I would be very gratefull for any advice.
    Thanks in advance

    Hi,
    Yes I have no function. I have been to the toshiba site but there was no windows 7 driver.
    then to synaptics and downloaded the driver restarted as promted and still not working?

  • Touch Pad Scroll stops working...

    When I watch Videos on Youtube, my scroll on the touch pad stops working. I don't want to have to stop using the site just cause of this little problem, any ideas to a fix for this?

    This actually happens randomly on my laptop as well, and pisses me off beyond all means.  I have a G60-445D notebook and it seems the problem really is with the Synaptic Touchpad drivers itself or with my Windows 7 upgrade that doesn't like it.  Originally the laptop was on Vista and never really had issues.  After getting my 'upgrade disc' from bestbuy/hp I've had quite a few issues with the notebook (most have been easily resolved however).  
    Really for this issue, HP probably shouldn't be to blame, but I will in this case seeings I have to go outside of the HP site to actually download the drivers for it (Please do add the driver to my notebooks drivers page, its quite annoying to find a driver outside of HP for my HP laptop..especially since we no longer send operating system discs or anything like that with the pc's we purchase now...but thats another issue that i have all together).
    Being that nobody else has responded to this, I'll try to give my two cents of a solution to you.
    Solution 1 (stupid solution really, but when im lazy or without internet at the time, this is my usual solution):
    1) start
    2) control panel
    3) device manager
    4) mice and other pointing devices
    5) find your mouse in there, mine says:  Synaptics PS/2 Port Touchpad.  Right click this and choose properties
    6) Click the drivers tab.
    7) If you have an option to "rollback" the driver, do that.  If you do not have this option, it seems "update driver" SOMETIMES works for me, might need to reboot though.
    8) if you DONT want to restart your computer after this when it comes up, you can click "no" most of the time and it still works.
    Solution 2 (Still stupid, cuz HP doesn't have drivers listed for my device page):
    1) go to http://www.synaptics.com/support/drivers
    2) choose your OS and install the driver that you need.
    3) Hope it works...if not, your best off trying solution 1.
    Only problem is, this wont "STOP" it from failing, it will still crash on you from time to time.  I'm also sure there are better solutions though.  Hope this helped for time being alteast though.

  • Satellite laptop touch pad scroll function

    Greetings, New to the site, new to any kind of forum. Looking for advise. I have a Satellite laptop L300, I don't have a mouse, I just use the touch pad. (this is a brand new PC to me) Every once and a while while moving my cursor on browser or email application, the the pointer turns into an up/down area and the screen auto scrolls. I'm not sure how I am turning this feature on, but I'd like to know how to disable it? Also, is there somewhere I can download an owners manual for this laptop?
    Thanks in advance for any help.
    Mark

    I figured out how to disable the scroll function.
    Buried in some settings...
    Thanks.

  • The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

    I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
    This should not be application dependant but a system function.
    Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

    I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them.  Even the guest login's trackpad worked perfectly but not the main admin account.
    First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
    So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
    I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
    Solution:
    I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions  to access the old admin users Library But I chose to boot
    from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder  BY Host. It has special hidden files. Other  way is to copy the Preferences folder we'll say into the Desktop.
    I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
    I'm leaving this solution because there's someone else in the MacWorld with the same issue.
    Ted

  • Equium A200-1VO - touch pad doesn't work but external mouse does

    I had a problem with my hard drive not working this just happened over night so I replaced the hard drive no problem and rebooted the system.
    All is ok but the touch pad will not work.
    I have tried FN+F9 this is ok I have updated the touch pad program still not working.
    Please HELP!!!

    To determine if its an hardware issue or a software issue do the following...
    1) go into bios (f2) and set it to default settings and save
    2) insert toshiba recovery cd and wait till the menu appears
    You should be able to move the mouse inside the recovery GUI, if it doesnt move then try holding function and f9 again.
    If this still doesnt work then your touchpad could be faulty.
    *Note* dont start the wizard to recover vista because it will overwrite your data, just cancel this if the touchpad works under this.
    If not just turn your laptop off and remove the recovery disk.

  • Since updating to firefox 9 my scroll feature on my touch pad doesn't work - help, please and thank you!

    since updating to firefox 09 my scroll feature on my touch pad doesn't work. How do I fix this, please? I have a Gateway laptop. This has never happened before with other updates.
    Thanks so much!!

    Thank you so much for your link - unfortunately it is totally beyond my skills to understand or correct the bug as posted. I can find the touchpad icon and right click to open the options and that's about my speed. If this is a bug should I uninstall Firefox 9? Thanks so much...

  • Satellite A660 - touch pad on/off and other buttons don't work

    Dear People on this forum,
    Recently, around 3 weeks ago i opened up my computer and i cleaned it, took the dust out because it was overheating.
    around 2 weeks before I noticed that my touch pad is not working and the top buttons are not working, there is no light (wireless multimedia sound buttons) I cant turn them off/on or I either don't know how. I am not sure if the problem is because I cleaned my laptop and did not connect some wires back but I am including this detail because I don't use those buttons so I did not notice if they were on. but 2 days ago I am not sure how my wireless went off ant when I press fn+f8 (wireless) it says wireless communication switch is off, which is one of the buttons that is not working (at the top next to of/on switch including with my touch pad)
    I have tried the following:
    windows update
    turn off computer take out all wires and battery and wait for around 30min. Then hold then on button for 30s
    reinstalling the flash cards support utility, hw setup and value added pack
    and finally a Toshiba out of the box recovery using the 2 product recovery cd's
    I am not sure what to do next. it is either:
    try something else
    or is there a wire is connected to both touch pad and the buttons at the top and i should open up my laptop again and connect them.
    please answer as to my next step to recovering my wireless.
    Your dear member of the forums, kaujis
    Message was edited by: kaujis

    Please dont understand me wrong but I dont know how to help you now. Notebook disassembling is for authorized people only and if you do this on your own there is always a risk that something can be done wrong or maybe damaged.
    OK I must also say that I have also disassembled my machine too but I was lucky and everything is OK as before.
    I dont know how A660 looks inside but the principle is always the same and I cannot imagine you have damaged anything.
    You know very well that we cannot say much about your problem. What you should do now is final functionality test and install original recovery image that you got with your notebook. Test functionality with factory settings. If the problem is still there, Im afraid you must open notebook again and check if everything is connected properly.
    Last option is to contact service and ask for help.

  • Touch pad scrolling

    I just did a restore of the laptop - new to me laptop - and now the scrool on the touch pad does not work.  I have gone to HP and down loaded the latest driver.  It was working prior to the restore.I have gone to Synaptics and downloaded the latest driver - still no luckon getting the scroll on the touch pad.
    I have an Pavillian ZD7000 - service tag ZD7260us.  
    HELP please let me knw where to look
    OP system XP pro
    Message Edited by nelie on 04-30-2009 08:43 PM
    This question was solved.
    View Solution.

    Hi,
    Go to:
    Control Panel -> Mouse -> Devices Settings
    Click there ' Device Settings ' tab. Choose ' Synaptics TouchPad ' and little lower click on ' Settings... '. From the list which will be there select ' Virtual rewind ' and check two options: vertical and horizontal scrolling. Click ' Ok '.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
    I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
    Can you help?

    Hi
    It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
    I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
    I assume that you dont have any problems with a common USB mouse.

  • Touch pad is not working

    【help】
    T440p Windows 7
    bought it in this March.
    touch pad is not working.
    "ThinkPad UltraNav Pointing Device  is unenabled " is said by  "Lenovo Solution Center"
    when open the device manager, Ultranav device can not be found in "Mouse"
    the driver of the  ThinkPad UltraNav is intalled well by  "Lenovo Solution Center"
    I can not use my touch pad even restart my PC.
    BTW, sometimes the keyboard can not working suddenly.
    in that case, when i restart my PC, the keyboard becomes woking.
    Best wishes, any idear will be welcomed.
    Thanks in advance.

    Hi Epco_yangchao,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing an issue with Touchpad on your ThinkPad T440p.
    Boot the system in safe mode and work for a while to confirm if it is working in safe mode.
    Uninstall UltraNav application for Control panel – Program and feature option and restart the system and check if you’re able to see any adapter in Device Manager under Mouse adapter.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • 2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.

    2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.

    nateshns wrote:
    2 finger scroll doesnt work in Finder after Mavericks update.
    In any particular app, or all of them?

  • This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangly (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

    My Vista Home Premium desktop has not used Firefox for a long time. I just loaded it as well as on my Honeycomb Android. The statement that I made pretty much says what my problem is. I can use both of them at the same time and use a router with the air Verizon card installed.
    I'll repeat my question: This is detailed: I lost my touch pad scroll ability on my desktop when I installed Firefox, I am having a terrible time trying to sync my new Android tablet to my desktop, my desktop Firefox is acting very strangely (I need help trying to use it)

  • My ipod touch back light doesnt work

    my ipod touch back light doesnt work. Does anybody to help me with that? Thank you

    Walk it into the nearest Apple Store and ask staff there for assistance.
    If you have Apple Care for it, contact them directly.

  • HP Pavilion dv6000 touch pad won't work on flat surfaces???

    OK well here's is what happened. The laptop worked fine the night before, no problems with the touch pad what so ever. When I started up the next day, I noticed the touch pad was not working. When I put in the usb mouse that didn't work either, it kept saying the usb device had malfunction. So obviously my 1st thought was it was a driver issue. So ( navigating with nothing but the keyboard) I un installed the old driver then re installed it, re started and it worked. Now normally I have the computer up on a TV tray but I happen to have it on my lap. When I put the laptop on the TV tray....the touchpad didnt work again!  Now remembering what I had done when I noticed the touch pad wasnt working in the 1st place; it was on the tray, then after I "fixed" it, it was on my lap. This is a very odd issue that doesn't make any sense. I've placed it on the tv tray; doesn't work; an ottoman; doesn't work, a regular table; doesn't work; even on the floor, nothing. But the moment I place it on my lap, it works perfectly!  I've tried looking up this issue via google to see what comes up but, I got nothing. Is there anyone that can explan what this could be? I understand this is a laptop but this is kinda rediculous lol.

    well , exactly this thing happend to me..as soon i place the laptop on my lap..mouse pad starts working..i got fixed when i formated my hard drive and reinstalled the os.

Maybe you are looking for

  • Data missing in cross tab

    Hi,     Using Business Objects 6.5 Deski I have created a report which has crosstab. The measure inside the crosstab is of decimal type. Along side the crosstab I have the totals for each row(suming it up). When I export this report to infoview and r

  • Oracle 11g with OBIEE

    Hi, I have installed latest release of obiee on my linux server and trying to connect 11g database from it. But I am getting the following error: libclntsh.so.10.1: cannot open shared object file: No such file or directory [nQSError: 46029] Failed to

  • PHP MODE에서 바로 MENU로 이동하기(11.5.9)

    제품 : AOL 작성날짜 : 2004-05-20 PHP MODE에서 바로 MENU로 이동하기(11.5.9) ================================ Problem Description User에 하나의 Menu를 가진 하나의 권한을 등록했을 때, 이전 version에서는 로긴하자마자, PHP화면을 거쳐 바로 해당 Web-page가 나왔으나, 11.5.9에서는 PHP화면에서 해당 권한을 한번 눌러줘야 다음으로 넘어가도록 변경되었

  • Multiple Assignments in Timekeeper entry form

    Team, We are trying to setup multiple assignments for Timekeeper. We followed the whitepaper out on Metalink and got most of the stuff working. Now, we are showing a list of jobs for each employee to choose from whether it is primary job or secondary

  • Opening a km folder using WebDav url

    Hi all I am trying to open a folder in km using the webdav url via explorer. I get a message : The folder you are looking for has no displayable content. You can try one of the following: Access the folder using the Navigation user interface. Access