Satellite A205-S6808 - Vista hangs during install

Hey All,
I've been trying to re-install/install my Vista OS on My Satellite 205-6808. But I get a pxe-e61:media test failure check cable. (But the HDD is installed properly) Then it will sit at idle for a while then windows green lights blink in sequence for a little and the a Arrow and just hangs until I shut it down.
I dont think that Vista really starts to install but it see something on the old drive. I'm trying to use the disk that came with the laptop but when I read the instructions it tell me to go online to "http://vista.toshiba.com/getready/upgradeadvisor" but I cant there's no way for me to get there.
The laptop does not load any type of internet capability.
Please help and please advice. I cant go out and buy a new laptop for the drivers I for camera and telescope are not made for W7
Thanks
Bruce

Try please to set BIOS to default settings and try to start recovery installation again. This PXE message occurs when notebook cannot find any bootable device and as last one try to use LAN card.
After changing BIOS to default settings check please if HDD is listed properly in BIOS on the first page.
> I'm trying to use the disk that came with the laptop but when I read the instructions it tell me to go online to "http://vista.toshiba.com/getready/upgradeadvisor" but I cant there's no way for me to get there.
Never heard about that. You must just start recovery installation.
After notebook start press F12 to enter Boot options. Put recovery disc into optical disc drive, choose DVD/CD on the list and press ENTER.
Please try all this and send some feedback.

Similar Messages

Dual Boot on Satellite A205-S6808

I tried dual boot on my Satellite A205-S6808. I have installed W7 and I want boot also with XP Pro.The Lap Top does not accept XP Pro.What can be done????
Many thanks in advance.
Lucanio Ramucci

I presume you must load SATA driver before WXP installation starts. Without SATA driver the HDD will not be visible for WXP.
According the notebook specification your notebook has Intel GM965 + Intel ICH8M chipset.
You can try to download this storage manager from http://support1.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip
Files from F6flpy > Ich8M_32-bit folder extract to FLOPPY Disc.
When WXP setup starts press F6 and follow the menu on the screen. When necessary load the files using S button.
I hope this will work.
If you don't have floppy disc to load it you can try to create own WXP installations disc using nLite software.
I hope THIS guideline can help you to do this.
I really hope you will have success with dual boot installation.
At the end I must confirm what Jeka wrote. If possible install WXP at first. When you install it as second OS you will not be able to choose between both installed operating systems. Only using BOOT manager you will be able to choose which OS should start. when you install newer OS as second one you will have small menu shown at start-up where you can choose which OS should be loaded.

Windows 7 hangs during install on HP Pavilion a Media Center 1320n

Windows XP Media is currently on machine. I tried to install Windows 7 Ultimate Edition. When the computer rebooted the installation would hang during the complete installation. I tried several times and the same thing happened. I reformated the hard drive and tried to install the same OS using a USB flash drive and got the same results. I reformatted again and tried to install Windows Vista Ultimate Edition and got the same results. The only OS I can install on this machine is Windows XP. Can anyone tell me what needs to be done to install Windows 7.
I upgraded the Bios with version 3.24 before I began the installation.

Another update in case anyone might be having the same problem.. Found out what the problem is.. But still have not resolved it.. I did another fresh install of Win7. Joined the domain and rebooted. When it came back up I checked the network and sharing center. It is showing "Identifying". Start> Run> firewall.cpl . It is showing Public network as my current connection. I unplugged my network cable and plugged it back in. It now shows domain network. Log offs work fine. After reboot it goes back to doing the same thing. I tried with both DHCP and a static IP. Both ways, same problem. So it works fine if the location is set to domain network but not to public (which i guess it automatically puts it in to if it cant identify the network). Sometimes it will go to work network. Logoffs take roughly 30 seconds compared to 8 min. on a public network or 2 seconds on a domain network.
We do have a group policy that disables security center. It will disable the firewall and other features when it is set to domain network. But not for the work or public locations.
The other policy we have in place is for Kerberos. Kerberos is disabled by default in windows 7 but is needed for our SAP to work. When we run a packet sniffer on the machine it is showing a lot of back and forth traffic with our DC and the protocol just shows Kerberos. So my next test is to remove the GPO for Kerberos and see if that makes a difference.
The funny thing is; I have a Precision 380 sitting right aside of it. Running Windows 7, joined to the same domain, connected to the same switch, in the same OU and it doesnt have a problem..

Security update 2008-005 hangs during install

after the download, during install, the security update installer seems to hang after what seems like a 10% progress (still in configuring install phase).
i've tried waiting for upto 10 minutes with no luck. could someone help?

Manually download the update from Apple and update from there.

Arch hangs during install

Newest version of arch hangs for me during install. I've tried the options
noacpi apci=off ide-legacy
it starts to load, gets to the word "Ready." and then does nothing.
Ideas?

27182818284 wrote:
Newest version of arch hangs for me during install. I've tried the options
noacpi apci=off ide-legacy
it starts to load, gets to the word "Ready." and then does nothing.
Ideas?
Say your configuration.Is i686 compatible?

Re: Satellite A300 - Windows Vista hang on - what can I do?

I have a laptop Toshiba Satellite A300 with OS Windows Vista Home Edition.
After some weeks of working with my laptop, it hang on.
I have reinstalled the OS but and it work well during 1 or two months then the laptop hang on again.
I bought this laptop October 2008 and I have reinstalled Vista 3 o 4 times.
What can I do?

You mean the Vista does not response after couple of time?
Well buddy, this can be an software issue.
I mean there are no magic solutions for such issues I assume you have installed and used many different applications on this notebook.
It could be possible that one of the applications causes this issue
It could be also possible that the registry entries and some system files have been changed during the Microsoft updates
In my opinion you should use some cleaning tools like for example the CCLeaner.
Its free tool and it cleans your registry and other files
You should also check the applications which are running while the system would start to hang up
Last but not least I recommend checking the memory you could run an memory test (www.memtest.org, www.memtest86.com) in order to find out some memory issues.
Good luck

Install of Sol. Mgr hangs during INSTALL SOFTWARE UNITS phase of SAPINST

I'm installing Solution Mgr. 7.0 Ehp1 with Oracle on Windows 2003 Server. The JDK is 1.4.2_26-x64
When I get to the INSTALL SOFTWARE UNITS phase of SAPINST, it hangs. This is phase 37 of 46
I see several different warnings/errors in the various logs. Not sure which one is the real problem. Here is what I see in the various logs.
Thanks for any help you can give me.
sapinst.log
ERROR 2010-05-17 22:47:32.955
FJS-00003 uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)
ERROR 2010-05-17 22:47:34.126
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)).
java_server.log:
Info: Starting cluster instance processes.
Info: Starting the instance JC_solman_MES_00 running on host solman
Info: Starting the instance JC_solman_MES_00 processes. The instance is running on host solman
Info: Starting the process server0
std_server0.out
May 17, 2010 11:39:38... ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_11] Fatal: Can not instantiate UserContext with given properties.
service security ================= ERROR =================
Core service security failed. J2EE Engine cannot be started.
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
     at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:183)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
dev_jcontrol
[Thr 3208] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1996] JControlDPMessageProxy: Thread 1996 started as handler thread for R/3 dispatcher messages.
[Thr 3208] [Node: bootstrap] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_26-x64
[Thr 3208] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
dev_rd
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 448
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1534) [nixxi.cpp    4436]
***LOG S23=> GwIDisconnectClient, client disconnected (003) [gwxxrd.c     11603]
***LOG S74=> GwIDisconnectClient, client disconnected ( solman) [gwxxrd.c     11614]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11649]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11662]
LOCATION    SAP-Gateway on host solman.sap.mertik.de / sapgw00
ERROR       connection to partner 'solman.sap.mertik.de:1534' broken
TIME        Mon May 17 23:39:38 2010
RELEASE     701
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4436
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     3
dev_server0
[Thr 4332] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2285550]
-> node name          : server0
-> node type          : server
-> node execute       : yes
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_26-x64
-> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:NewSize=320m -XX:MaxNewSize=320m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> java vm version    : 1.4.2_26-b03
-> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : amd64
-> heap size          : 1024M
-> init heap size     : 1024M
-> stack size         : 2M
-> root path          : C:\usr\sap\MES\DVEBMGS00\j2ee\cluster\server0
-> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path       : C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50021
-> shutdown timeout   : 120000
[Thr 4332] JLaunchISetDebugMode: set debug mode [no]
[Thr 4404] JLaunchIStartFunc: Thread 4404 started as Java VM thread.
[Thr 4404] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
     Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=512m
-> arg[ 12]: -XX:MaxPermSize=512m
-> arg[ 13]: -XX:NewSize=320m
-> arg[ 14]: -XX:MaxNewSize=320m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 20]: -Dsun.io.useCanonCaches=false
-> arg[ 21]: -Djava.awt.headless=true
-> arg[ 22]: -XX:+UseParNewGC
-> arg[ 23]: -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> arg[ 24]: -Dsys.global.dir=C:\usr\sap\MES\SYS\global
-> arg[ 25]: -Dapplication.home=C:\usr\sap\MES\DVEBMGS00\exe
-> arg[ 26]: -Djava.class.path=C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_26-x64\jre\bin\server;C:\j2sdk1.4.2_26-x64\jre\bin;C:\j2sdk1.4.2_26-x64\bin;C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs;C:\ORACLE\MES\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\usr\sap\MES\SYS\exe\uc\NTAMD64
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -Xss2M
-> arg[ 32]: -DLoadBalanceRestricted=no
-> arg[ 33]: -Djstartup.mode=JCONTROL
-> arg[ 34]: -Djstartup.ownProcessId=4328
-> arg[ 35]: -Djstartup.ownHardwareId=U1840606892
-> arg[ 36]: -Djstartup.whoami=server
-> arg[ 37]: -Djstartup.debuggable=no
-> arg[ 38]: -Xss2m
-> arg[ 39]: -DSAPINFO=MES_00_server
-> arg[ 40]: -DSAPSTART=1
-> arg[ 41]: -DCONNECT_PORT=64998
-> arg[ 42]: -DSAPSYSTEM=00
-> arg[ 43]: -DSAPSYSTEMNAME=MES
-> arg[ 44]: -DSAPMYNAME=solman_MES_00
-> arg[ 45]: -DSAPPROFILE=C:\usr\sap\MES\SYS\profile\MES_DVEBMGS00_solman
-> arg[ 46]: -DFRFC_FALLBACK=ON
-> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 48]: -DSAPSTARTUP=1
-> arg[ 49]: -DSAPSYSTEM=00
-> arg[ 50]: -DSAPSYSTEMNAME=MES
-> arg[ 51]: -DSAPMYNAME=solman_MES_00
-> arg[ 52]: -DSAPDBHOST=solman
-> arg[ 53]: -Dj2ee.dbhost=solman
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 4404] JHVM_LoadJavaVM: Java VM created OK.
[Thr 5488] Mon May 17 23:39:30 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 5488] Mon May 17 23:39:32 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 4440] Mon May 17 23:39:38 2010
[Thr 4440] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4440] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.

Basis Guy,
I followed your instructions, and the problem still exist. Per note 908911, I added "SAP_BC_JSF_COMMUNICATION" role to the SAPJSF user in the backend ABAP system. I've tried starting and stopping
the System through SAP MMC, and I see the following (solman is our hostname):
solman 0 - The AS ABAP work processes start sucessfully, the AS Java processes, show three processes, with two in the stopped state:
1) SDM - state is stopped
2) Dispatcher - state is running
3) server0 - state is stopped, with a return code of -11113
solman 1 - shows 2 processes
1) Msg Server - running
2) Enqueue Server - running
From SAP MMC, I look at the Developer trace for the 2 stopped processes (SDM and server0). This brings up the dev_server0 log, and the dev_sdm log. In both files, I see the following error:
[Thr 3712] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
When I look for this file, it does not exist. Is this my problem, and where does this file come from during the install?
From the Syslog of SAP MMC, I see three errors when starting the system, in this order:
Process Type: DP Message ID: GZZ
SAP-Basis System: > 1 possible network problems detected - check tracefile and adjus
Process Type: RD Message ID: Q01
SAP-Basis System: Operating system call           recv failed (error no. 10054)
Process Type: D0 Message ID: R49 User: SAPJSF Client: 001
SAP-Basis System: Communication error, CPIC return code 020, SAP return code 223
Also, I see the following error in the defaulTtrace.0.trc file:
#com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties".
java.io.FileNotFoundException:
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties (The requested operation cannot be performed on a file with a user-mapped section open)
However, I see that this file does exist, but what does it mean "a user-mapped section is open"?
As for the configtool, Global Server Configuration, when I look for all instances of J2EE_GUEST or SAPJSF, only two parameters show up:
ume.login.guest_user.uniqueids = J2EE_GUEST
ume.r3.connection.master.user = SAPJSF
Looking in the ABAP System (via SU01), I see that J2EE_GUEST shows password deactivated. Is this correct?
Please advise.
Rick
Sunny,
Not sure what you mean by update the latest logs from sapinst.log.   I've displayed the sapinst.log in the original post. I may just be misunderstanding your request.
Let me know if there is more info that you need.

ITunes hangs during install in Windows 7 64bit.

I've been having trouble installing iTunes on my Windows 7 Pro 64bit. It hangs at the same place every time. I opened up task manager and found the culprit, DiFXInstall64.exe. When I kill this process, iTunes continues and finishes the installation. Why does it do that? What is DiFXInstall64.exe? And does it cause any problems if I kill the process and iTunes installs as usual? Will that damages the program and give trouble later on?

http://www.microsoft.com/whdc/driver/install/difxfaq.mspx
DifX componentry is used to install the GEAR drivers itunes uses for importing and burning CDs. After the install goes through for you, are there any messages (when opening iTunes for example) indicating that there's trouble with your iTunes burning and importing capabilities?

New MBP: Vista crashes during install w/Boot Camp-any suggestions?

Trying to install vista on new MBP. Using Boot Camp, everything seems to work until the very end, and Then Vista says it couldn't finish due to a problem with a device(I'll have to check the exact error at home tonight....)and that I will need to restart and re-install. Then it gets stuck restarting and going to the same message over and over. so frustrating....
This is with a fresh copy of OSX 10.5.5 on a new MBP 2.4 with 4G of ram, right out of the box. New copy of Vista SP1, and following the bootcamp instructions to the letter. I installed all Apple software updates before launching bootcamp. Other than the Apple updates, am I missing something?
Any thoughts would be greatly appreciated!
Thanks

You would do better posting in the BootCamp forum here:
http://discussions.apple.com/forum.jspa?forumID=1244

Satellite A205-S6808 corrupted DVD/CD-ROM Driver - Code 39

My driver is corrupted for my CD-ROM/DVD player.
There is absolutely no support for my model on the Toshiba homepage.
I tried to download the drivers for the L series L505 since my tech friend said it should have worked. It did not.
The device shos up, but I get a driver missing/corrupted message from windows.
I am running win 7 32 bit and the DVD player is the same one that came installed when I bought the laptop.
This is the message I get "Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)"
CAN ANYONE HELP??

Hi
Im a little bit confused how you have managed to download the CD/DVD driver for the internal ODD (optical disk drive).
The point is that all Windows operating systems contain own Microsoft ODD driver which controls the CD/DVD drive.
Therefore its not necessary to load/install any drivers for CD/DVD drive.
In my personal opinion its a registry issue.
You should firstly go to the device manager and should remove the CD/DVD drive from the system.
Next step is registry cleaning.
Start regedit and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
After that reboot the unit
Should work
Greets & Good luck
PS; This is an US notebook model and all drivers can be found on Toshiba US page.

A205-S6808 Satellite Vista fresh reinstall. Which is better? Erase H. Drive first or not?

Is it best to totally erase hard drive before a Vista reinstall? I did the restore to factory out of box but on restart it says "one moment as Windows Vista runs for the first time…" then it just stays there on screen and does not start. HELP!!!

Satellite A205-S6808
Downloads here
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you don't have the recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Hard Disk Drive Recovery using the Recovery media, which begins on p. 64 of the User's Guide.
Stellite A200/A205 Series User's Guide
-Jerry

Satellite A205-S4777 - XP does not recognize HDD

Hi!
I recently have buyed a new Toshiba A205-S4777 satellite with Windows Vista home premium installed
and i noticed too many errors in Windows Vista and the pc is very slow so i decided to downgrade to XP
I want to install directly Windows XP but the installer does not recognise the hard drive or more exactly the controllers!
I nLited the Sata drivers in the Windows Xp Sp2 i have bought in the microsoft.com site!
Everything worked fine.
The installer recognised the Hard Drive and the installer finallased fine!
But here' s the problem when windows loads and try to switch on it gaves a kind of blue screen unreadable one!
And restarts and if you let it it does all the day the same!
I am afraid i do not nLited the correct drivers.
Is there anybody that heve downgraded this model ?
Thanx

Hi
Possibly you used not right SATA driver ?:| Who knows
The point is that there are two different Intel Matrix Storage Manger versions which support different chipsets.
I dont know what chipset your notebook supports but you should check this and should check also the Intel Storage Manger description and should check what chipsets are supported.
Additionally you should take a look here into this Toshiba doc:
[How to integrate a SATA AHCI driver in a Windows XP Setup CD|http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]
Bye

Black SOD after Vista Updates on Satellite A205-S5804

I have a Satellite A205-S5804 laptop running Vista Home Premium. It ran fine until an automatic update (about a month ago). Then I got the Black Screen Of Death during bootup (somewhere after the Vista starts to load but prior to the user logon). Took it to the Geek Squad who says it isn't hardware related (as my extended warranty only covers hardware). They claimed it is a corrupted OS. I think they are correct about it not being hardware since I can get it to go to Safe Mode. Restore didn't work. I acquired a copy of Vista Home Premium and attempted to run repair but that didn't correct the problem. Next I reloaded it. Everything ran great like it is suppposed to. But the automatic update downloaded and installed the 92 or so Vista updates that it supposedly needs since the Vista disk was produced. Now the problem is back. I can get to Safe Mode, into the BIOS and just about everything else except I cannot get it to boot normally without black-screening before the login to user prompt. I have hooked an external monitor up and when the laptop blacks out the external monitor reports no signal. I suspect there is an issue with a Vista update (which one I do not know). I have already backed up the data I want to save and have that on another computer. Any suggestions other than to reload Vista and not ever acquire any updates? Is there a setting in the BIOS or a "fix" to the Vista update? I tried searching for hours on this issue and have not found a solution. Thanks for any help or suggestions from other Toshiba users.

Restore didn't work.
What does that mean?
It means that when I selected an earlier restore point (prior to when I suspect the Vista update downloaded and installed) the black screen issue remained. At none of my restore points could I get the issue to go away or resolve itself.
I tried the Toshiba restore to out of the box, or at least I wanted to, however, following the manual instructions the laptop did not give me that option. I held down the 0 (zero) button and powered it on but it did not go into the Hard Drive Recovery mode. I suspect my model is not one of the ones that came with this option.
So, after taking the laptop to the Geek Squad originally after the problem appeared and verifying that I don't have a hardware problem and also trying the recommended methods for returning to a stable and fully functional computer, I purchased a legit copy of Vista Home Premium so that I could reload the operating system. Yes, I am realizing how much more difficult Vista is than XP. I have reloaded Vista from scratch. I registered the copy. I have downloaded and installed SP1. I am currently doing SP2. I am basically creating a clean machine with just an OS loaded. Once I am sure that it will function properly (no more blacking out) I will reload my programs and transfer my data back.
Tedious process...but it seems like my best option. And now that it is in progress there really isn't any point in trying anything else other than uninstalling any update(s) after I reach a stable point that may be causing the screen to black out. If and when I reach that point again I will visit Microsoft to see what assistance I can get for any Windows Updates that I can identify as being troublesome.
I really appreciate everyone's input and suggestions. I was hopeful that it would be something as simple as an outdated driver or something along those lines. However, as much as I have searched, I have not found anyone who has had the exact same problem and there doesn't seem to be an easy cure. I will keep you posted on my success or failure with the method I have chosen. Thanks again.

Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me

Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

Satellite A205-S6808 - Vista hangs during install

Similar Messages

Maybe you are looking for