Satellite A205 will not boot after Pixela ImageMixer 3 install

Help!
I've had my Satellite (A205 S5804) for a year and a half, and it's been great...until last night. I purchased a Canon camcorder, and went to install the Pixela ImageMixer 3. After following the on-screen install instructions, it recommended I do a reboot. The pc shut down, restarted, and then went into this never-ending spiral of "system recovery diagnostics". I ran the utility, and it can't correct itself (I think something in the registry may have gotten damaged/overwritten during the install??). Safe mode won't work. Nothing works.
I can get to a DOS prompt, which takes me to "X:\~~~" and I don't know what the "X" drive is supposed to represent. I'm cursing myself now for not making a system recovery disk. I have files I'd like to try to get off of here before I do something drastic like a full-blown reformat of the HD.
Is there anything I can do to get past this system recovery loop? Am I going to have to reformat and start over?

Ok, I have looked everywhere, and am pretty certain I do not have a system recovery disk for my Toshiba. However, I did find a few other disks - can you tell me, will a system recovery disk for a slightly older Satellite work? We have another Toshiba Satellite (I think it's an M or N series) that was purchased a few months before this one. Or do I need to have a disk for my exact model? Also, how do I identify a local ASP? I purchased my machine at Best Buy, and they were quick to say they don't have recovery disks and I'd need to call Toshiba. Toshiba told me it'd be up to 10 biz days, and I'm hoping to not have to wait that long...
Thanks for any info again - I do sincerely appreciate all your help...

Similar Messages

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

IMAC 21.5 " allinone will not boot after OS re-installed

Had to erase HD and re-install Snow Leopard from installation disc. It completed OK but sys will not boot, tone sounds and Apple logo comes up and 'wheel' is spinning, but that's it. Waited for over half hour before shutting down. Thanks for any help anyone can provide.

Try a safe boot by holding the Shift key down between the startup tone and logo.
If succesful, go to System Preferences > Startup disk > select your HD and restart.

Satellite M45 - Will not boot after restore to new HDD

I installed a new PATA 250GB HDD into my pc. Configured BIOS to boot from CD/DVD. In started Toshiba recovery disk from cold boot, followed instruction to load a new system on the HDD. It performed a (quick) format on the HDD, spent 50 mins copying files from CD to new HDD. Followed instructions to remove CD and reboot pc. Did that. I get the Toshiba splash screen for 2-3 seconds, then I get a blank screen with a white block cursor in the upper LH corner of the screen. Seems like it cant find the boot block on the HDD?
Did the recovery procedure 3 times with same results. Checked BIOS to make sure it is set to boot from HDD after the install.
The recover CD is virgin. Never used since I bought the PC (3.5 years ago). Put new HDD into a USB enclosure and formatted with Windows, tried again with same result?! Put the old HDD in, PC boots and runs fine. Put Knoppix live CD and boot from that, works fine. Sees the new HDD.
So, any suggestions are appreciated. Is the Toshiba recovery CD defective? Anyway to test?
Thanks
-J

Thank you for your reply. I doubt it is the hd. I took it out of the laptop, put it into an external usb-pata enclosure, formatted it under windows, copied files to it...deleted files, etc. all was fine. I'll install DSLinux just as a test (maybe something wrong with boot block but I doubt it.)
Yea could be corrupted recovery disk. I am in the process of getting an XP disk (I am actually trying to get out of the situation of buying an xp disk but will see if I can borrow one)
If the recovery disk is hosed, know where I can get a replacement? Doubt that Toshiba will give me one. There got to be some images around that I can dnld for free (not really interested in paying for one....)
I'll still need to slipstream in the driver updates no matter which route I'll go.
This kind of **** really ********* me off....grrrr

G4 QS Will not boot after 9800 Pro Install

So I tried to install a 9800 Pro in my QS 733, and now it will no longer boot. I push the power button, the button lights up the drives strat to wind up and it stops and powers off. I tried replacing the card with my old ATI 64MB and it does the same thing, just as soon as the drives start up the machine shuts off.
I tried unplugging all devices even the monitor, I tried even unplugging both of the HDs but nothing worked.
-Chris

I just tried a new PRAM battery, I tried zapping the PRAM. Is there a specific way to zap it? I unplug everything, hit the button plug it all back and try to power up. I also tried with the machine unplugged. Any suggestions?

Mac will not boot after Snow Leopard install

I recently had a HD crash. Replaced the HD and installed Snow Leopard from a image file on an external HD. Install went great. I copied over data files and things seems just fine. My first reboot after the install and the Mini won't boot. I am stuck with the Apple Logo and a spinning wheel. I ran disk utility and the new HD checks out fine. When I boot with the external HD, it still sees my Mini HD. I tried restarting with Command/Option/P/R but that didn't do anything. Any advice?

I'm in a slightly similar spot- no crashes, but-- What I want to hopefully do is run my Tiger ppc apps (3) for CAD on my New- 5 weeks old) Lion Factory Installed machine. The ( November) First Aid Issue of Mac Life mentions a way
way to get external boots, UNLESS they are the Factory installed ( Lions). In the meantime----
Johnny

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Will not boot after updates

I have a macbook air. It is running Lion. After updates it will not boot. It starts installing updates and just stops all together. Any help would be very welcome.

Hey bfa67,
Thanks for the question. To isolate the issue, what happens when you start up in Safe Mode?:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
Thanks,
Matt M.

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Satellite M40x will not boot up after CPU upgrade test

I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
Anyone have any ideas on what is causing this??

Im not surprised.
As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
So possibly this is a reason for the no booting.
I think more details you will get from the service guys in your country

Satellite L100 will not boot up if wi-fi is enabled

Hi
Starting from the beginning, yesterday for first time my husband connected his Satellite Pro L100 PSLA4E to an LCD TV using a s-video cable. Everything seemed to work fine but thebackground on thedesktop had vanished, there was just a plain white background with all the usual desktop icon. He restarted the lappy thinking this would sort it out but did not disconnect from the TV first. The lappy did not start back up - just had a plain black screen, no warnings or anything.
A couple techie minded friends arrived at that point and suggested the lappy had 'lost' its display drivers and, after a lot of research decided the only option was to reinstall everything from scratch.
I do not have the original Toshiba restore disks or recovery disks so downloaded all the drivers from this site. Now the laptop will not boot-up if the wifi is turned on. This model has a Atheros network card - at least the lable on the bottom says contains Atheros AR5BMB5.
If I turn the wifi switch to off the lappy starts up every time, if however the switch is on it will not start up even in safe mode. If I turn the wifi on after windows XP has started up the lappy freezes and keyboard etc are non responsive and i have to force a shut-down by holding down the power button.
So far I have spent hours trawling this and other websites to try find any clues that might help.
Does anyone have any suggestions as Christmas is likely to be hell if hubby does not have his lappy to play with!!!
Many thanks in anticipation.
Tree

Hello Tree
After almost 10 years with Toshiba notebooks I must say that I have never heard about something like this. For me it sounds unbelievable.
The best solution for you is to install OS using original Toshiba recovery image. If you don't have one you can order it.
What you can try is to enter BIOS settings at startup. Set it to default settings and check if the problem persists.

Satellite A205 will not boot after Pixela ImageMixer 3 install

Similar Messages

Maybe you are looking for