Satellite A210 1AP - The display is not turning on

I had a problem about a mounth ago with my Toshiba Satellite A210-1AP, just once the display did not turn on. Computer was working, all lights were on. That light that shows reading from HDD was blinking, working as normal, but with display still turned off. So I turn it off, and next time I tried it was warking as usual, with display turned on, he asked if i want to start windows normaly, or in safe mode (like when it is restarted unnaturally). Then worked normaly for few days, then it happened again. At that time I couldn't go to the service (computer was on warranty, and how to prove that something happens sometimes if it do not happened there). So I continued to use it, and as time passes by the problem was more often. Then I decided to go to service.
Guy in the service said that the problem is motherboard, so he changed motherboard, and it took about month for him to do it, and then when I called he said me that it isn't working still. And maybe he has to change all parts, display, graphical card is maybe problem, that he didn't saw problem like that...
So my question is do you know what the problem could be? And the second question is can I demand from him, as it passed 30 days to give me new computer instead changeing all parts on it?
Thanks,
Nikola

Thanks for answers.
I have my notebook now back, but there is another question, you said that video card is on board on A210-1AP? Because tehnician said taht he ordered new one, after replacement of mother board...
I also doubt that he lied me with some more things, so I would like to know some things. Is there any toshiba policy that the broken parts have to be send back to toshiba? Because in law there is one paragraphf that sais that he have to give me back also broken parts.
And one more.
Do changed parts have extended waranty? For example I bougth laptor before 1,5 year, so he changed motherboard. Do the motherboard have waranty 2 more years or just half year as other non changed parts.
There is also paragraph about it in serbian law, but tehnician said that I don't have more waranty, and if it dies again (hopefuly not) that I can call inspection...

Similar Messages

  • My iPhone fell in the water and the display will not turn on, I can hear SIRI

    My iPhone 5 fell in the water
    I put it in rice and now I can hear SIRI but the display will not turn on

    You'll have pay the Out-Of-Warranty-Service fee, to get it replaced, the water damaged the phone too much.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
    copied from Service Answer Center - iPhone

  • When I close my Mac Book when its on a- The display won't turn back on whe-

    When I close my Mac Book while it is on and leave it on while closed for long periods of time and then I open it, the display will not turn back on- why?

    Does it turn on when you do something like hit a key or click the mouse? Or do you need to restart? If the former, forget about it, except try clearing the pram/nvram. (commandoption+pr on startup till it bongs a few times). If the latter and if the step above didn't work, you've got a problem that might be solved by doing an archive & install.
    Message was edited by: Jonathan Kurtzman

  • Display does not turn on even though computer is running

    Hello All,
    I have a 2008 non-unibody MacBook Pro. When I boot the computer, sometimes the display does not turn on. I've tried using the flashlight technique, and there isn't even anything on the LCD. I know the computer is on because it makes the chime and if I enter my password I can adjust the volume and play music. Occasionally, resetting the SMC will fix the issue temporarily, but it doesn't always work. What should I do?

    Tried  resetting PRAM?
    Some  of the display settings are stored in PRAM.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

    Hi there dworthen,
    It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Screen does not rotate
    http://support.apple.com/kb/TS3805
    -Griff W.

  • Slimline s3321p display does not turn on after sleep (Win 7)

    Upgraded from Vista 32 bit system to Win 7 32 bit because of lots of Vista issues. Win 7 resolved most problems but then recently, after a couple of months, display would not turn on following sleep or hibernation. Couldn't fix so did clean install of win 7 64 bit (custom instead of update) to resolve the problem. But same thing in Win 7 64. Installed the multiple MS updates. MS''s Nvidia display driver install always failed and a couple others I downloaded elsewhere failed as well. Did finally get a recent driver from nvidia's website that installed (9.18.13.697), but it didn't solve the problem. Ran the same as the older driver.
    Also tried the following:
    -all kinds of power setting changes
    -different monitor (flatscreen TV is the normal one I use because this is my dvr/media machine)
    -different RGB cable
    -ran win 7 install disk to fix any OS problems
    -inactivating hibernate
    -checking voltage output of all power supply leads following instructions (all within normal tolerance)
    -reconnecting all motherboard leads
    -swapping around the two 2GB memory modules
    -various system checks
    -tried to install various Vista 64 bit fixes/updates from HP website, but they don't install ("don't meet minimum requirements")
    -and more things I can't remember
    HP doesn't seem to have any Win 7 support for this computer, so now I'm at a loss. At the moment I'm leaving the machine on all the time, but don't want to do this forever. I suppose it could be a faulty motherboard, but short of replacement, anything else to try?

    Hi,
    A couple of suggestions:
    Check you have the latest BIOS update - 5.18 - search for sp40834.exe - often these updates improve these functions
    If you are game, try just one RAM stick installed as a test, try slot 0 and 1
    Lastly, try a different video cable - It's a long shot, but it could be key to the issue
    Hope that these suggestions assist
    regards davida
    "Although I am an HP employee, I am speaking for myself and not for HP"

  • My iphone 4s update to ios 7.0.2,the wifi can not turn on.why??

    My iphone 4s update to ios 7.0.2,the wifi can not turn on.i try 3 Method alal fails
    1. turn off callular date .
    2. turn off iphone ,Plugged into the computer with cable, auto turn on.
    3. update new ios 7.0.2
    last method had been display GPRS TO 3G  'LOL'
    I clicked the wifi button  stop there.can not work.then ios auto restart 3 times ,oh my god.
    how to change to the old version.  ???ios6.1.3

    Settings>Mail,Contacts&Calendars, in the mail section, add the hotmail account if no longer there.

  • Display will not turn off

    I synced my iphone with itunes last night and now the screen will not turn off automatically when at the home screen. It will turn off when at the lock screen. I have tried both a soft and hard reset without result. ANy suggestions?

    go to your settings ---- > general ------ > auto-lock , and chose to auto lock it in X minutes. right now, in auto lock menu on your device it probably says NEVER because your display doesnt lock itself and stays on basicly forever XD hope i helped Cheers sorry for my bad english

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • When I turn my iPod the screen does not turn with it  :(

    When I turn my iPod the screen does not turn with it  >:(

    Try here:
    iOS: Not responding or does not turn on

  • I have an iPhone 4 and recently updated the software.  Since then, the screen will not turn off after the 1 minute autolock.  How do i fix this?

    I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock.  How do I fix this?

    Settings>General>Auto Lock

  • I turn off the phone will not turn to dear, I need the photos...

    I turn off the phone will not turn to dear, I need the photos emergencies because there I have very important information. That I can do to recover photos. I understand that you had downloaded the iCloud but when I Icloud not appear on photos.

    Through iTunes, plug it in and you should be able to do a iCloud restore

  • I have a small lock showing on my screen and when I turn the phone sideways the screen will not turn. How do I unlock the scree ?

    I have a small lock showing on the top of my screen on my iphone 4 and when I turn the phone sideways the screen will not turn with it. How do I unlock this

    http://www.iphonefaq.org/archives/97974
    Also available with the iPhone user guide.

Maybe you are looking for

  • On Hold for 8.8

    On behalf of a number of customer, I would like to request the ON HOLD functionality for BP's and items to be reinstated in SAP 8.8. Often organisations would like to place a BP on hold manually, which still allows for the BP to appear in searches an

  • Xml photo gallery loop

    Hi, I have photo galleries loading via an xml file. Right now, it stops at the last photo. I would like it to "loop" back to the first photo instead of stopping and vice versa for the previous button. Here is my code for next and previous buttons. Th

  • Cisco 3750 with integrated WLC, wpa2 ent, 802.1x and ms IAS.

    So first post, I usually figure most of this stuff out. I have this all working with latest firmware etc, but I have more of a MS IAS issue than anything. The Peap cert used is one generated for my IAS controller, but I have two things... I'd like it

  • Oracle shared server default connection

    We are currently trying to use shared server on an Oracle 11.1.0.7 standard edition database. We don't have any problem regarding parameters or performance yet. We can connect either with dedicated or shared connection. Our problem or issue is with t

  • NO SID VALUE ERROR in detail steps..

    Hi gurus pls xplain how to solve NO SID VALUE ERROR in detail steps.. Thanks, Akshay a.