Satellite A210-1AP - video card stopped working playing Call Of Duty 4

Hello,
I am having problems with my video card.
When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
Then it says Your video card stopped working, and problem solved.
My video card is ATI Mobility Radeon HD 2600.

> Then it says Your video card stopped working, and problem solved.
And? Is it working now?
Possibly the graphic driver hung and therefore you received this message.
Its also possible that the GPU temperature was too high and therefore the message appeared.
The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

Similar Messages

  • Satellite A - LAN card stopped working

    I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
    Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

    Hi!
    Which Satellite notebook do you have exactly?
    Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
    Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • Satellite A210-1AP - Transcend SD HC 16GB class6 not working

    My laptop can`t work with that card properly.
    Is there any solution?

    Hello
    I agree with Feliks. I have checked the user manual and there I can see that the Satellite A210 supports SDHC cards up to 4GB.
    So a 16GB card will not work.
    Look in your user manual. If you dont have it you can download it on the Toshiba website.
    http://eu.computers.toshiba-europe.com => Support & Downloads => Toshiba User Manual
    Greets

  • Satellite A210 1AP - The display is not turning on

    I had a problem about a mounth ago with my Toshiba Satellite A210-1AP, just once the display did not turn on. Computer was working, all lights were on. That light that shows reading from HDD was blinking, working as normal, but with display still turned off. So I turn it off, and next time I tried it was warking as usual, with display turned on, he asked if i want to start windows normaly, or in safe mode (like when it is restarted unnaturally). Then worked normaly for few days, then it happened again. At that time I couldn't go to the service (computer was on warranty, and how to prove that something happens sometimes if it do not happened there). So I continued to use it, and as time passes by the problem was more often. Then I decided to go to service.
    Guy in the service said that the problem is motherboard, so he changed motherboard, and it took about month for him to do it, and then when I called he said me that it isn't working still. And maybe he has to change all parts, display, graphical card is maybe problem, that he didn't saw problem like that...
    So my question is do you know what the problem could be? And the second question is can I demand from him, as it passed 30 days to give me new computer instead changeing all parts on it?
    Thanks,
    Nikola

    Thanks for answers.
    I have my notebook now back, but there is another question, you said that video card is on board on A210-1AP? Because tehnician said taht he ordered new one, after replacement of mother board...
    I also doubt that he lied me with some more things, so I would like to know some things. Is there any toshiba policy that the broken parts have to be send back to toshiba? Because in law there is one paragraphf that sais that he have to give me back also broken parts.
    And one more.
    Do changed parts have extended waranty? For example I bougth laptor before 1,5 year, so he changed motherboard. Do the motherboard have waranty 2 more years or just half year as other non changed parts.
    There is also paragraph about it in serbian law, but tehnician said that I don't have more waranty, and if it dies again (hopefuly not) that I can call inspection...

  • Video Share Stopped Working

    Was working yesterday and before.  Now, it's stopped. Crashes with a window saying it stopped working.  What is going on?  I bought this program because it had that function.

    beauscoppertop
    Unfortunately you have not given us enough information to help you.
    So, let us start with the details that will help us to help you.
    1. What version of Premiere Elements are you using and on what computer operating system is it running?
    2. If you say that "Video Share" stopped working, what specific export route and settings were you using when the crash occurred and at what stage of the export?
    3. How did you set up your project
    a. What are the properties of the source media...video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio? What is the duration of the Timeline content?
    b. What project preset did you or the project set to match the properties of the source media. If you do not know, please see Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if they appear to be grayed out?
    4. Basics
    a. Are you running the program Run As Administrator and from User Account with Administrative Privileges?
    b. Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
    c. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many video/graphic cards does your computer use, 1 or 2?
    c. What is the description for your computer and its resources?
    There is no one answer fits all for this type of question, and the answers are in the details that are lacking here.
    So, please review the requested information and post the information to help us help you. We will help you gather any information that you may have trouble finding.
    Thank you.
    ATR

  • Video popout stopped working

    Video popout stopped working...help!

    A video within a website which provides live footage. When clicked it doesn't open up and play. It has only stopped recently and still works on other platforms , PC etc.
    I've disabled pop up blocker but not luck.

  • How can  hear a sound in the u tube videos she stop working?

    How can return the sound in the u bube videos when stop working?

    rikardfromswe wrote:
    Also, later when working, how do I get the sounds on the extention card into the program?
    Thanks!
    You don't, none of the Roland sounds are ever transferred to Logic.
    MIDI has nothing to with sound, it's only a trigger that activates the sounds in the Roland.
    I have a couple of 1080's in a rack, their audio outputs run into a mixing desk, from there they can be routed to my audio card inputs.
    Logic-X Manual is here:
    http://help.apple.com/logicpro/mac/10/

  • Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz  The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:  Is there any way of fixing this? I've tried

    Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
    The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
    Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
    Question 2 (related):
    This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
    Thanks for reading this.
    el7

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

    I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

    I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

  • When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

    When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
    I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3.  I want to sych with iTunes but clearly must upgrade to >10.1
    When I do, my network card no longer works on my desktop.  Please HELP!
    My spec is;
    NETWORK CARD;

    polydorus wrote:
    This isn't my thing, but the following post on this seems to have helped some people:
    http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
    That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

  • 32g sd card stopped working ,is there an answer to correctig problem ?

    32g sd card stopped working , is there an answer to correcting problem ?

    take it out and put it back in
    reformat it
    have you tried it in a pc with card reader?
    buy a new card?

  • Sdhc cards stopped working with 10.9.1 update

    sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

    Have you checked for an update and/or asked the developer for help?

  • After Software Update 2007-004 airport card stopped working after wakeup

    Hi,
    I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
    Does anyone have a similar problem? Any work arounds?
    Thanks in advance.
    Also following is the logs from Software Update. Looks suspicious:
    Mac OS X Version 10.3.9 (Build 7W98)
    2007-04-28 18:56:03 -0400
    2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
    WirelessScan timeout waiting for first scan result
    WirelessScan timeout waiting for first scan result

    Deleting AppleAirPort2.kext solved the problem for some...
    http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
    While others had to rollback the AppleAirPort.kext to version...
    http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
    Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

  • 5233 Memory card stopped working!

    Hi,
    I've had this phone for almost a year, it's good but there have been few problems.
    I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
    56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
    Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
    3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
    Please help all my data is on memory card.
    Regards
    Solved!
    Go to Solution.

    Hi mtank,
    Thanks for your post.
    If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

    My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

    Is there an error message? What is the exact wording of that message?
    Remove the sim, clean the contacts, reseat the sim.
    Go to your wireless provider and get a new sim.
    Make an appointment at your local Apple store to have the iPhone evaluated.
         http://www.apple.com/retail/geniusbar/

Maybe you are looking for