Satellite A210 touchpad scrolling disabled after Windows Vista update

Last week I accepted a Microsoft Windows update. Sine that update I can not get the Satellite to recognise its touchpad and the only driver updates that work are for a standard PS2 mouse. I can no longer use the bottom and side scroll features of the Toshiba touchpad. What drive am I looking for to rstore the touchpad please?

You can find the Touchpad driver here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Firstly remove the driver from Control Panel -> Programs and Features
Then download and install the latest version.
If you have Logitech mouse drivers or other 3rdparty mouse/keybiard drivers installed, remove those as well.

Similar Messages

Satellite A205-S4607 doesn't start after windows vista update

Hello,
I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
The model is Satellite A205 -S4607

Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
Message was edited by: Nvillegas

T61 no sound after Windows (Vista) update (?)

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

U400 Touchpad not disabling after Windows 8 consumer preview installation

The u400 touchpad used to disable when i pressed the f6 key. However, once i installed the Windows 8 consumer preview, the touchpad stopped disabling. I installed the newest driver (the one released Feb 8) and still have no luck. They funny thing is, when i press f6, a sign appears on the lower right corner that shows a disabled touchpad (touchpad with a line across it). However, the touchpad still functions.
This is a pretty big issue for me since I find it nearly impossible to type comfortably without the touchpad being disabled. (For example, my cursor jumped 5 times when typing this post) I am sure I am not the only one with this problem. Please help! Worse comes to worst, i will reinstall windows 7, but if there is anyway to fix this problem, please let me know.

I didn't have exactly this issue but wanted to permanently disable but that was not going to be easy. Mine was hypersensitive and totally messed up any keyboard work. I called tech support and they installed new software to lessen the sensitivity but now when I push F6 key to disable, the icon you described keeps popping up every keystroke. These Lenovo guys are just useless and so sorry I bought this computer.

Yoga ThinkPad Touchpad Scrolling Issue after Windows 10 Upgrade

Yoga ThinkPad upgrade to Windows 10. My horizontal area at the bottom of the Touchpad scrolls the screen up and down, and the right vertical area of the Touchpad scrolls the screen left to right. The reverse direction choices only reverse up/down or left/right and not how the horizontal/vertical areas operate. Did anyone else experience this? Thanks.

Good day.
Could you clarify which model Yoga laptop you have, please?
Regards.

Cisco VPN Client after Windows Vista Update (KB941229)

I had the Cisco VPN client 5 installed on my laptop and configured by the IT department at work. It was working fine all day until I restarted and KB941229 was automatically installed. When it turned back on the Cisco VPN service (CVPND) would attempt to run then stop. If I started it manually it would run for about a minute then stop again. Without the service running the VPN client won't open, let alone let me connect.
I know this vista update is fairly recent so I'm not sure there will be a fix but maybe somebody can think of a workaround or some way to fix this situation.
Things I've tried:
1) Uninstalling the windows update
2) restarting
3) restarting (in denial that this was happening)
4) configuring a vista VPN connection to attempt to connect to the company VPN (this failed too)
Uninstalling the update caused me to be unable to ping for some reason. This meant the VPN client would run but be unable to connect to the server and yet I was entirely able to access the internet locally. I reinstalled the update assuming maybe the installation went badly but that caused the same problem with the VPN service stopping itself (or being stopped) after a minute.

Hello
my issue has been resolved.
there is a service called Base Filtering Services running in background for Vista and has to disabled to make IP Sec VPN Client working.
after doing so it works smoothly.
- Dhaval Tandel

Master Collection fails to start after Windows Vista update

Last night, Automatic Update patched my machine and restarted. This morning, I find that all my CS3 apps (from Master Collection) will not start. Every app presents me with the "Adobe ________ .exe has stopped working." Has anyone else experienced this? Thanks!
Vista Ultimate x64
Intel Core2 Duo 2.66GHz
8GB RAM
Angry
-Andrew

Hi all, just ran into the same issue after Service Pack 1 for Vista. Here's the solution:
If you are getting a message about the BRS pencil tool when launching Illustrator and you are using Windows Vista or XP, you may be missing an important font.
For Vista users you are missing the Segoe-UI font. For XP users
you are missing the Tahoma font. These fonts need to be installed on
your system in order for Illustrator, Flash, Photoshop and InDesign to
launch. Most of the other applications will give you a generic
"application has stopped working" error when trying to launch.
Also,another clue is located inside the Event Viewer. For vista users, click on your start button and in the search area type "event", the event viewer will show in the results area, click on it and then click on "windows logs", then click on "application". For XP users, click Start, then Run and type "eventvwr" and hit enter, then click on
"Application". By double-clicking on an error you will see the
description for the problem. If the faulting module shows AdobeOwl.dll, you are most likely missing the font. You can do a google search for the font and they are available for download.
So far I have not found a solution for a mac. The documents referencing these errors are kb402311 and 331889

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Outlook 2007 not opening after Windows Vista Update 25-Aug-09 [Qosmio G50]

I thought that posting my experience just now might be helpful to others.
Yesterday (25-Aug-2009) my Outlook 2007 was working perfectly. I had downloaded & installed Outlook Connector 12.1 because I'd received an e-mail from Microsoft to say that the DAV protocol used for HTTP mail would be withdrawn on 1-Sep-09. I also noticed that MS had restored the POP3 service that they closed down a couple of years ago.
So I set up the POP3 account and started working with that. All OK.
Last night when I closed down, Windows Update came in and completed on reboot this morning. Outlook 2007 wouldn't start, coming up with the message: +Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened.+.
Nothing I did in that environment would enable Outlook 2007 to load, I created a new profile and that did no good.
So I went back to the System Restore Point made at the time of installing the Outlook Connector and everything sprang to life.
I had also tried the restore point that undid the Windows Update, but that didn't cure the problem either.
So, I'll see what happens when I reboot next time in case it had nothing to do with Windows Update.
Cheers

There are many tools at the Inet, but no one of them weren't interested me, when I seeking for the solution of my trouble. Only my friend by chance offered me an one long-standing application. It enjoyed me for seconds, I presented my friend a gift and to my mind it would help in such problem also - pst email recovery.

I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

Windows Vista update has disabled full screen minimize feature when watching videos

After recent Vista update I can no longer connect to hyperlinks in emails and fullscreen video function disables functionality and I can no longer stop or minimize videos until a system reboot. Hoe do I restore to before the update?

It was an Explorer update not Vista. Any help appreciated

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Black screen after windows auto update

New laptop in use for 3 weeks. After Windows auto update restart I get to splash screen and am able to enter Windows password to log onto desktop. After successfully entering password I am not able to view my desktop; I get the black screen with cursor function; cursor disappears when moved within an inch of left or right of screen (seems to go behind something). I believe I am at the desktop but just not able to view it, because I receive app popups on the black screen (need to update McAfee, etc).
In safe mode I restored to pre auto update date; manually installed all Windows updates; worked fine until NEXT auto update, same problem.
Graphics Card: Stock Intel HD Graphics
Monitor: Generic PnP
Why would it be fine with the manual update and not after auto update?
I do not have an external monitor to attach this laptop for diagnosis. I have run windows partition checks and hard drive partition checks with no issues to resolve.
I did get an error message once when running a diagnosis (can't remember which) : Windows Update Error 0x80070490
No real luck finding anyway for me (the average Joe) to resolve this issue.
If this is a harddrive issue I don't want to keep pussyfooting around while my warranty window shrinks.
I have downloaded driver updates from HP, but cannot get the Synaptics Touchpad driver to download. I don't think this is my issue though.
I am going to manually update all my drivers then manually update Windows. We will see what happens on the next auto update.
Please advise if this is an issue I need to just give up on and return this laptop for replacement. It seems like this is not a completely unheard of issue, but I'm shocked at what we are asked to do to attempt to resolve it. Out of my depth.

Hi @Justanothermom
Welcome to the HP Support Forums!
I understand that you are having troubles with a black screen after an update. I am happy to help you with this.
Firstly, there is nothing wrong with modifiying your update settings. I was going to suggest it myself as I read through your post, and then saw you ask the question. Sometimes updates can have unintended results by the creator. With all the different combinations of hardware, and the fact that updates come from different sources, it is one of those things that is hard to completely control.
Please see the following for how to make adjustments to your update settings.
Turn automatic updating on or off - windows.microsoft.com
Or if you know which update seems to be causing the issue you can take a look at this page:
win 8.1 August 12 updates - black screen after 2nd reboot - answers.microsoft.com
Let me know if this helps at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

Hello
Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
Any idea?

hmm... this is strange ?:|
The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
However, the case seems to be clear dont install it if the driver is not designed for your OS.
Regards

InDesign CS6 crashes at startup after windows 7 update

InDesign crashes at startup after windows 7 update: Faulting module path: C:\Windows\system32\MSVCR100.dll (Microsoft Visual C runtime and update KB2538243 and KB2565063)
Reinstalling did not help
Also Adobe Encore CS6 seems to be affected

I looked at the recovery files in:
C:\Users\MyName\AppData\Local\Adobe\InDesign\Version 8.0\en_US\Caches\InDesign
I deleted all the files and Indesign started up fine. feeling good I closed Indesign and restarted.
Indesign Crashed again.
Deleted all files again and reloaded.
I went to "Edit:Preferences:File Handling:Document Recovery Data" to:
G:\Adobe\Indesign\Cache\Recovery
Interestingly, the Indesign application recovery files still reside in the user directory above. But the document recovery data moves to the G drive above.
There is no clear reason why Indesign quit loading today. It worked fine since initial installation last year. But separating the document recovery data from the application recovery data seems to fix the problem for now.

Satellite A210 touchpad scrolling disabled after Windows Vista update

Similar Messages

Maybe you are looking for