Satellite A30-921: How to remove and replace the memory?

hi, can anyone help me how to remove and replace the memory of sat A30-921. and also, please give a detailed instruction.
thank you in advance.

Hi
There is no much to explain. At the bottom side in the middle there is placed memory cover (fixed with two screws). Remove the cover and you will see 2 slots there. I dont know how much memory has you there but as Stefan said you can use max 2 GB of RAM (2x PC2700 1024MB - PA3313U-1M1G). How to remove memory modules you can see on http://www.hardwaresecrets.com/article/189/5
Bye

Similar Messages

How to remove and replace keyboard on HP Touchsmart Notebook 15-D020NR

I spilled a drink on my keyboard and now I cannot get the Caps Lock to turn off and a number of keys do not work. I need the instructions on how to remove and replace this no frame keyboard. Thank you.

On your Support page- look for Maintenance and Service Guide under Manuals. http://support.hp.com/us-en/product/HP-15-d000-TouchSmart-Notebook-PC-series/6627588/model/6761859/manuals

I want to change my apple id primary e-mail from a .msn address to a .gmail address. The problem is that currently my .gmail address is my cover address and I cannot figure out how to remove and replace my gmail recovery address.

I want to change my apple id primary e-mail from a .msn address to a .gmail address. The problem is that currently my .gmail address is my recovery address; I cannot figure out how to remove and replace my gmail recovery address with a new e-mail address. I want to do this because I no longer use my .msn address.

You should be able to change your rescue address by going to My Apple ID, signing in to manage your ID, then selecting the the Password and Security section, and answering the two security questions. If you have trouble with this, contact the Apple account security team for your country to verify your identity and ask for assistance: Apple ID: Contacting Apple for help with Apple ID account security. If your country isn't listed, contact iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

How to remove and change the color of Java cup and border

Hi to all,
How to remove and change the color of Java cup and border.
Thanks in advance
khiz_eng

This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

Got the UO52 error message. Tried the step by step method to remove and replace the print head

still get UO52 error message after removing and replacing print head

Hi palygirl,
If reseating the printhead in your Canon printer does not resolve the U052 error, it is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to assist your further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Satellite A30 keyboard suddenly stopped working - how to remove and replace?

Hi all, n00b to laptops and first post. Ok, I usually build and repair desktops, so much easier to gain aceess!!
My daughter switched on her A30 laptop last night and only 2 keys worked. Tried rebooting and getting into BIOS but couldnt. Tried getting it to boot into safe mode, only the up and down arrow working so could not select safe mode...doh. Am guessing this must be a harware problem.
Rebooted into Xp an opened up notepad....this time about 5 keys working. Reboot, 3 key etc etc.
How do I get to the ribbon cable to make sure it is seated properly. Is it common for a keyboard to fail in this way and is it easy to get a replacement?
At the mo, have all the small screws I can find out, removed battery, DVD rom and hard drive. Seems to be held towards the middle and rear. Dont want to force it and break something else!
TIA.

OK, so I had to laugh....flip the little cover on the top of the laptop and there are the 2 screws that hold the keyboard in place....lol
The ribbon cable was just about in its connector. Pushed it in and engaged the two locking tabs on the plastic retainer...job done!
Put it back together, fired up and Bingo! we have a keyboard again!
Oh well, may help someone else I guess.
Now she has no excuse for not doing her homework!

HOW TO REMOVE AND REPLACE OFFICEJET PRO 8500 A 910 PRINTHEAD

HP OFFICEJET 8500 A 910 PRINTHEAD ALIGNMENT FAILS. HOW DO I REMOVE & REPLACE THE PRINTHEAD. I HAVE READ THE USERS GUIDE WHICH SAYS LIFT UP THE TOP AND THEN LIFT OUT THE PRINTHEAD. UNFORTUNATELY YOU ARE NOT TOLD HOW TO DO THIS. I OBVIOUSLY DO NOT MEAN THE TOP COVER OVER THE GLASS... THE PICTURE SHOWS THE TOP COVER RAISED AND ACCESS TO THE PRINTHEAD. THERE IS NO ACCESS TO THE PRINTHEAD WITH THE TOP COVER RAISED!!!
This question was solved.
View Solution.

Hello,
Please click http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02257580&tmp_task=solveCategory&cc=us&dlc=en&la... to access the steps that should resolve the issue .
Please refer to Solution two .
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Wish to desolde/resolder, remove and replace the two damaged usb2 ports

I've a Sat A30 Perfect in every way other than the 2 USB2 ports in the rear which are damaged (black Plastic seperaters between the connectors have popped out) not quite sure why this hapened as I was simply unplugging the connected usb plugs on both occasions.
The connectors were not particularly tight. so the fault is I have no insulation between the copper connectors which are still housed in slots and causes short circuiting, when I plug in any usb device.
I've purchased a relpacement (damaged) motherboard and usb2 connections are A-OK! Have good technician experience in carring out soldering/desoldering and have all neccessary tools . Problem is I haven't a clue which connections on underside of board are required to be desoldered from my damaged usb2 board in order to remove/swop and to carry out the neccessary replacement.
I'm sure I'll be advised to contact a registered Tosh dealer. I have tried this and they say they will only relace the entire motherboard and cost is horrendous. I'd rather carry out the repair myself as it's not rocket science.
Any techies out there who could advise with picture of the relevent pins to desolder in order to remove and repair fault would be greatly appreciated.
email : [email protected]
if you can help in any way or point me in right direction to get on with repair.
Hope someone can help. Many thanks,
Stewart

Hello
Please dont be mad on me but in my opinion it is not a very good idea to open the notebook alone if you have not much experience with it. The notebooks are designed on specific way and hardware exchange is not so easy like the hardware exchange at desktops.
Believe me that a little mistake in assembling/disassembling procedure can case a damage of hardware parts or even notebook casing. I know that there is no much help by service partner because they want to do this. It costs money but you must understand that if they give this kind of advice or information they can close the store very soon.
You can try to do this alone but on your own risk and be careful.

How to find and replace the main logic board on HP4600N Laser Printer.

Can anyone let me know how to replace the main logic board on my HP Laser 4600 N. My printer was freezing up and in calling customer service, they informed me that the main logic board is going bad. Now I have the part but no instructions on how to replace or where to find it on the printer.

A Google search may turn up a downloadable service manual for the Laserjet 4600.
You might also ask in the HP Enterprise Business Community Forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to remove and add the component to JFrame at runtime.

Hi
How to delete the JTabbedPane component from the Jframe at runtime and how to add the same component with different data at runtime.
But the remaining components should not distrub.
When i try to delete and add the component at runtime the remaing components are distrubed.
when i minimize and maximize the screen, the components are adjusted. but i need a help on this without minimize and maximize the screen.

Hi
I am sending my code snippet, please look into this......i am doing the same even though i am not able to..................can u suggest anything seeing this code snippet.
here one function called createtabpane (It creates the JTabbedpanes with the table information at runtime).
private void getTimeSheetObj(String weekDate){
//Object[][] rowObj=null;
try {
System.out.println("Inside the gettimesheet method try block");
if(projTables!=null){
for(int i=projTables.length-1; i>=0; i--){
JTable jt = projTables;
jTabbedPane_Main.remove(jt);
System.out.println("Removing Table:"+i);
jPanel_Tabbedpane.remove(jTabbedPane_Main);
jTabbedPane_Main = new JTabbedPane();
jTabbedPane_Main.revalidate();
jPanel_Tabbedpane.revalidate();
getContentPane().validate();
getContentPane().repaint();
jTabbedPane_Main.addChangeListener(new ChangeListener(){
public void stateChanged(ChangeEvent ce){
getTabbedPaneListenerValues();
// this.setState(JFrame.ICONIFIED);
// this.setExtendedState(JFrame.MAXIMIZED_BOTH);
res = GetTimesheetResponseDocument.Factory.parse(new File("C:\\Narayana.xml"));
response = res.getGetTimesheetResponse();
proDets=response.getProjectDetailsArray();
numOfPro = proDets.length;
String taskDayValues[] = new String[8];
System.out.println(numOfPro);
proArr=new Object[numOfPro];
Object[][] taskValues=null;
for(int p = 0;p<numOfPro;p++){
System.out.println("Inside1");
taskDet = proDets[p].getTaskDetailsArray();
taskValues = new Object[taskDet.length][8];
for(int t=0;t<taskDet.length;t++){
System.out.println("Inside2");
taskValues[t][0] = (taskDet[t].getTaskName());
taskValues[t][1] = (taskDet[t].getDay1HH()+":"+taskDet[t].getDay1MM()).toString();
taskValues[t][2] = (taskDet[t].getDay2HH()+":"+taskDet[t].getDay2MM()).toString();
taskValues[t][3] = (taskDet[t].getDay3HH()+":"+taskDet[t].getDay3MM()).toString();
taskValues[t][4] = (taskDet[t].getDay4HH()+":"+taskDet[t].getDay4MM()).toString();
taskValues[t][5] = (taskDet[t].getDay5HH()+":"+taskDet[t].getDay5MM()).toString();
taskValues[t][6] = (taskDet[t].getDay6HH()+":"+taskDet[t].getDay6MM()).toString();
taskValues[t][7] = (taskDet[t].getDay7HH()+":"+taskDet[t].getDay7MM()).toString();
System.out.println("After taskvalues");
proArr[p]=taskValues;
createTabPanes(jTabbedPane_Main, proArr);
System.out.println("outside");
jPanel_Tabbedpane.add(jTabbedPane_Main);
jTabbedPane_Main.getAccessibleContext().setAccessibleName("Proj");
getContentPane().add(jPanel_Tabbedpane);
pack();
}catch(XmlException xe) {
System.out.println("Inside the XmlException block");
System.out.println(""+xe.getMessage());
} catch(IOException ioe) {
System.out.println("Inside the IOException block");
System.out.println(""+ioe.getMessage());
/* JOptionPane.showMessageDialog(null,
"Values Displayed in the below tables",
"Alert!",JOptionPane.ERROR_MESSAGE); */
System.out.println("Initial JFrame Bounds:"+this.getBounds());

How to remove and assign the subclsss in Migration.

Hi All,
I am migrating the form 6i appliaction form 6i to 10g with database as 9i.
I am trying to migrate the form 6i files to 10g.
I have get the referenced emb file (subclass file) from the database and made the Object library from this file. I have put the olb file in the registery path of the forms.After this I have open the form in the migration tool and migrate the form. I have done the changes according to the LOG file. But when I am opening the form it is not getting the subclass files so that it is asking the database connection.
Can any body please advice me how to remove the subclss information at the time of migration from database to file so that after migration it will take the subclss refrence from the olb file.
Can any body just advice how to migrate the forms 6i to 10g in steps OR any document, URL (Specially removing the referencce and taking the new reference from OLB)
Thanks in advance.
SUN
Edited by: User SUN@ on May 13, 2010 4:31 PM

Hi,
Not eactly the same but there was a set of Forms that reference another Form for subclasses rather than the OLB. I've managed to sort that out using JDAPI and here is a sample bit of code. Basically , going through property classes and removing then and then adding the property classes object group from the OLB. It seemed to do the trick didn't upset the properties of the items using the class. It may be of help to you.
There was no migration in this : just a fix on a Forms 10g module. I'd yes you could do the same, migrate to 10g and then use JDAPI to fix the form.
HTH
Steve
      for (JdapiIterator mods = Jdapi.getModules(); mods.hasNext(); ) {
         FormModule mod = (FormModule)(JdapiModule)mods.next();
         u.logger.info(mod.getAbsolutePath() + " " + mod.getTitle());
         for (JdapiIterator classes = mod.getPropertyClasses(); classes.hasNext(); ) {
            PropertyClass cls = (PropertyClass)classes.next();
            classes.remove();
         ObjectLibrary objLib = ObjectLibrary.open(p.getProperty(systemName + "pll.directory")+"/myapp.olb");
         for (JdapiIterator oTabs = objLib.getObjectLibraryTabs(); oTabs.hasNext(); ) {
            ObjectLibraryTab oTab = (ObjectLibraryTab)oTabs.next();
            if (oTab.getLabel().equals("Object Groups (Sub-Class these)")) {
               for (JdapiIterator tabObj = oTab.getTabObjects(); tabObj.hasNext(); ) {
                  ObjectGroup objGrp = (ObjectGroup)tabObj.next();
                  if (objGrp.getName().equals("APP_PROPERTY_CLASSES")) {
                     ObjectGroup newObj = new ObjectGroup(mod, "APP_PROPERTY_CLASSES", objGrp);
                     u.logger.info(mod.getName() + " APP.OLB added in");
         objLib.destroy();

I have a power mac and the hard drive is about to die, i have a new hard drive to install, i know how to remove and put the old in the second space and load the new one, then what...when do reinstall the OS and transfer data from old drive

I have a power mac, the hard drive is struggling, I have a new hard drive ready to install, after I pull the old one and put the new one it's place and place the old one in the next slot ready to transfer data....how do I start this next step. Do I down load OS, and go to utililities...please just a step by step after hard drives in position.

Hi Susan, you must have a Mac Pro, Powermacs cannot run 10.6.x
Anyway, once you Install the new drive, you likely must Format it...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
Then Install the OS & on first boot of the new install, after a step or two, avail yourself of Migration Assistant & Migrate everything.

How to find and replace the text present in the url

I have a column of type NCLOB with some text having url's in between as shown below:
========================================================================
This text is for testign purpose.This text is for testign purpose.
<A PL/SQL <U PL/SQL </U> </A>
Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> <U oracle metalink> </U> </A>
This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
========================================================================
Requirement:
========
Requirement is to implement the find and replace functionality.
I just need to check whether the search text is present in the url or not?
Suppose if search for orcale.com, since its part of the url so the search should be successful otherwise search should be unsuccessful.
Here I can give you the hint like, always the url lies between the anchor tags *(<A </A>).*
Tahnks in Advance.

I had I think a similiar question the other day thay I Frank and Michaels answered for me.
not sure if I totally have what you want but.
WITH t
        AS (SELECT '<A PL/SQL <U PL/SQL Thsi text is also for testign purpose.This text is for testign purpose.
<A http://forums.oracle.com> This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.This text is for testign purpose.
                      txt
              FROM DUAL)
SELECT REGEXP_SUBSTR (REGEXP_REPLACE (txt, '(.*<A)|(</A>.*)'), 'oracle.com')
FROM tthe first part the regexp replace part gets the text between a start and end point you mentioned that would be <A and </A>
the regexp substr just looks for the phrase oracle.com in the text between those two points.
Edited by: pollywog on Oct 6, 2010 8:26 AM

How to find and replacing the path (url) given for data binding from type 'datasocket'

Hi everyone,
I'm sorry to pose this question as my own knowledge is still very limited.
I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
Many thanks,
Niels

Dear Niels,
Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
- I got a reference to the front panel
- with this reference we can get an array of references to the controls on this front panel
- one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
- if found, stop we will use the reference to write a new URL to the control.
Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
Best regards,
Martijn S
Applications Engineer
NI Netherlands
Attachments:
findURLexample.vi ‏12 KB

A25-s207 starts if I remove and back the memory but stops in a few minutes... Help!!!

move re

if I remove and put back the memory, it starts but slows down & stops after a few minutes... Help!!!

Satellite A30-921: How to remove and replace the memory?

Similar Messages

Maybe you are looking for