Satellite A30: OS says invalid ID after installation

Well,
after attempting to reinstall my laptop with the recovery CDs, which kept on failing at 65% on some wav file for the interactive tour.
I found that I had a made backups of my C:/ root and noticed, that on I386 there was a WINNT32.exe setup file.
I booted with ubcd4win, and run it, but Windows is asking me to activate it. But it keeps on saying I have got an invalid id, I can't be bothered with the recovery CD's which have never successfully worked in the first place.
Should I just activate Windows by phone, as Microsoft suggests?

Hi
If the recovery CD doesnt work correctly so you can call the Toshiba service partner and there you will get a new one.
No clue why it hangs on 65% but maybe something wrong with the CD surface.

Similar Messages

SATELLITE A30 ERROR!!! AFTER INSTALL RECOVERY DISCS

INSTALLED BOTH DISC AS IN MANUAL... GET ERROR MESSAGE ...AT THE END OF DISC 2... CAN FIND NO WAY OF EXITING OR CARRYING ON WITH THE INSTALLATION..REMOVED DISCS SEVERAL TIMES AND BEGAN PROCEEDURE AGAIN WITH THE SAME RESULT; ERROR NO;437 MESSAGE.. ;CANNOT READ FROM FILE ...ALSO LOADS OF OTHER WRITING IS ON THE SCREEN... I THEN PRESS ESCAPE;; AND IT LOOKS LIKE IT NEEDS A FILE NUMBER ? NOW I REMOVE THE DISC ;I CAN ONLY BEGIN THE SAME PROCEEDURE AGAIN NOTHING ELSE WORKS ON PC.....
DISCS CAME WITH PC AND I HAVE USED THEM TWICE EASILY
LAPTOP CODE A30 (PSA30E)14MONTHS OLD WAS WORKING OK SOMETIMES SAID IT WOULD HAVE TO CLOSE BECAUSE GENERIC HOST HAD ENCOUNTERED A PROBLEM ... RECOVERY DISCS DONT SEEM SCRATCHED CAN ANYONE HELP ?????????

Hi 6sixs
You probably have some problem with your discs or Optical drive. The best you can do now is try to find out where the problem resides.
The simplest (I think) way to do this is to take the second CD (the one that always produces the error messages) and copy the complete contents to a temporary folder on another machine. Why this? If the CD is defective you will probably see that also on that machine. It will probably stop with an error message saying it can't read the contents of the disc.
In that case you have defective Recovery CD's and need new ones.
If the copy-process works out fine, then probably you have a defective CD-drive in your notebook.
Good luck
Tom
Message was edited by: Mannerhagen Tom

Satellite P300-156: Vista wont start after installation of Toshiba Tempo

Hi
I have a new Satellite P300-156 which I have been using for about a month with no problems. It has been great.
This morning I had a message come up to install Toshiba Tempo which I did and all was fine until I restarted the laptop and now Vista wont start.
I have followed all the diagnostic tools, tried system restore etc... but still nothing.
I currently live in Italy, so is hard to take it into a computer repair shop as I dont speak Italian and the operating system is in english.
From what I can see my only option now is to do the TOSHIBA HDD Recovery, but I would loose some data which I have done since my last backup. Is there any way to backup data to a usb storage device using command promts before I do this, or is there a simpler way out of this?
Any advice would be great.
Thanks
Keith

Hi
Thanks for getting back so soon, however, F8 does nothing when starting. I have an option of F2 or F12, but neither gives me options to access last known good configuration.
Is that the same as a system restore from the Vista system recovery options as I have tried this (gives you a list of last known configurations). But still no luck.
If I do the TOSHIBA HDD Recovery function do I need a disc for this?
thanks

Satellite A30 does not come back after hibernation.

If I don't touch the keys for 10 mins or so my laptop goes into hibernation. It will normally come back when I touch a key or the touch pad but sometimes nothing I do can get it back. I have to turn it off and then back on again. I was wondering if anyone had any ideas?
I looked at the power management and I can turn off all hibernation but I like it to hibernate when I close the lid so is there any way to make it so it ONLY hibernates when I close the lid and at no other time?

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

Using serial from product box, but serial number invalid after installation?

Ok, so. I have a copy of Photoshop 5, a physical copy, in the original box. I tried to install it on my computer, and actually did so successfully--it recognized the serial number from the box as correct and did a full install. However, when I actually opened Photoshop for the first time, a message came up saying that the serial number was invalid, and my options were to enter a new one or wait until next time, when I'd have to enter a new one for Photoshop to run.
I haven't closed it yet because I need it for work and don't want to risk it not running. Why would my definitely valid serial number not work? I double and triple checked what I typed in, and it initially accepted it, only rejecting it after installation.
I'm on Windows 7.

Welcome to the forum.
Did you purchase this copy of Ps 5 (Assume CS5, but please correct me, if it is the very old Ps version 5) from Adobe, or a 3rd party?
If from Adobe, log into Adobe.com with your Adobe ID and go to My Products. Verify the S/N there.
If from a 3rd party, it could well be that the S/N provided has been "used up."
Good luck,
Hunt

Trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

CS2 Installs successfully on Windows 7 but says invalid Serial Number

Hi all,
I just bought a new Dell with Windows 7. When I installed the CS2 Premium software, it accepted my serial number and it also activated the software successfully at the end of installation. When I check my online Adobe account, it shows the activation. It's only when I actually go to use the apps that I get the message that it thinks I have no or an invalid serial number. I'm wondering if Windows 7 is storing the info in a different place or format. Anyone have any suggestions? Adobe no longer supports CS2 and definitely not for Windows 7.
Thanks for your help,
Scott

I had same problem. Adobe support (tech support and customer service) are no help. Try this. Deactivate and uninstall the program on your new Windows 7 pc. Then create a new folder on hard drive called " Program Files CS2" or any other name. Do not use the "Program Files" or "Program Files (x86) " folder and do not create a folder with () brackets in the folder name.
After installation, program should come up and not even ask you to "Personalize" it with your name and serial number.

Acrobat 8 - switch hw and os from win xp to win 8.1 - installation says 'invalid serial number' - although I am very sure, it is :o)

Hi folks,
I am switching from my former pc (win XP) to a new one (Win 8.1).
As I wanted to move my acrobat 8 installation to the new computer, I did the following right now:
- I deactivated the license (from within acrobat 8) on the old computer
- I uninstalled acrobat 8 on the old computer and restarted it
- I downloaded acrobat 8 from the adobe website on the new computer
- I startet the installation, which asks for the serial number
- I logged in to my acrobat-account and found my serialnumber there
- I checked this serial number with my paper-copies and invoice (bought ion 2007): it's allright
- I typed in the serialnumber / I copied it in from the account / I copied it from the email I recieved in 2007 / I checked it twice and more:
The installation-tool says 'invalid serial number' - although I am very sure, it's the right one.
I cant go further.
What is going wrong or am I doing wrong?
thanx for your help

Hi crunchycrisp,
First of all i wont suggest you to install Acrobat 8 on windows 8. This version of application has never been tested on Windows 8.
You may upgrade to the latest version of Acrobat.
~ Ajlan Huda

Whenever i open itunes after installation it says error 7 itunes was not installed correctly

whenever i open itunes after installation it says error 7 itunes was not installed correctly

For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components may allow you to install Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Just bought a new iphone 4s 16gb my sim worked correctly after puting and old profile on the phone so I could get all the info now it says invalid sim what can I do o fix this?

just bought a new iphone 4s 16gb my sim worked correctly after puting and old profile on the phone so I could get all the info now it says invalid sim what can I do o fix this?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

TS4148 i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please he

i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me

That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards.

Satellite A30-921 shuts down after 10 mins

I own a Satellite A30-921 but it shuts down after 10 mins.
I've tried to alter the toshiba power management settings but they wont work any ideas ?

Does the notebook shut down automatically without showing any error messages?
This could be caused by an overheating issue!
How old is your notebook and did you clean the cooling ventilators in the past?
If not I would recommend doing this.
To clean the ventilators you could use the compressed air spray which can be purchased in most computer stores.
The problem is that the dust and debris inside the notebook prevents the cooling modules from properly working and therefore the temperature increases to the higher level. This leads to the automatically shuts downs.
In my opinion the fans cleaning could helps to solve this issue.
Bye

Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the act

Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the activtion server will be back online and will it solve my problem with no service and invalid sim error

I was quite surprised by that. And I've been off for a little because I've been giving final exams at the college where I work. Now with break I will be spending a little more time on here until I have to start getting ready for the Spring semester. I have experienced a couple of interesting posters in the past week though. I wa afraid one was going to reach through the CAT 5 and grab me around the neck.

Hi, I upgraded to OX X Mountain Lion, and now I can't upload any pictures from iphoto/desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?

Hi, I recently upgraded to OX X Mountain Lion, and now I cannot upload any of my pictures from iphoto or even my desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?

Not having a media card in your BlackBerry may affect your ability to transfer media files onto it. There is a file size limit of 2.86MB when transferring files into device memory. http://bbry.lv/9XNuy0
Have you verified that the applications you are trying to install are supported by your current wireless provider? Unlocked devices from one provider may not have full functionality on another network.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Error message occurs after downloading. it says invalid drive:e:/ what am I doing wrong?

Error message occurs when trying to download itunes. It says invalid driver: e:/. What am I doing wrong?

Hi there,
You may find the article below helpful.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Satellite A30: OS says invalid ID after installation

Similar Messages

Maybe you are looking for