Satellite A300-19R won't boot.

Hi everyone.
My notebook A300-19R won't boot to any device drive .
When i press the power button it's start the POST then display Toshiba splash screen but when hi try to boot to the disk it's stay blocked and display a blacklight screen.
I enter in setup BIOS and verify that the boot sequence is ok and it's detect all device correctly then i try to boot to recovery boot CD but the same problem appeared, i try many bootable disk but i get every time the same problem a blacklight screen after the toshiba splash screen.
It there any user fix problem.
THANKS.
Khaled
Message was edited by: uzoumaki

Hi
I found this thread and I would like to summery you issue;
- You are not able to start the Windows OS; neither using the normal nor safe mode.
- you are not able to boot from any bootable disks like recovery disk or other windows disk
- you cannot recovery the notebook using the HDD image
- You can see nothing on the screen, its black.
- connecting external monitor does not help
Unfortunately buddy, but it looks like a hardware malfunction something is wrong maybe the motherboard who knows
I think the A300 should be covered by warranty therefore I would strongly recommend contacting the ASP in your country and to ask for the help!!!

Similar Messages

  • Satellite A300-1LT won't boot up - blank screen & no HDD activity

    I had a problem, touch pad won't work.
    I found on internet solution to shut down computer, take out battery, wait a little bit, and start again.
    That is when my problems start.
    When I placed battery back on, i turned on the laptop.
    Blank screen (nothing happens), led indicators are on (except for hdd), cd drive tries to read but nothing happens, and the fan is on.
    I tried everything that I could find (wait for 30 min, take battery out, start without battery, etc...) but no luck.
    My lap top is Satellite A300-1lt, and I had it for 2 months.
    I don't want to take it to service, unless it is really necessary, because i really need it now, I can't wait for weeks until it is returned.
    Can please somebody help me out, Im desperate....
    Thanks in advantage...

    Connect your notebook (with battery) to the AC power supply and leave it an hour and try to start your notebook again. If notebook starts again leave it running until the battery will be full charged again.
    I hope it will work properly again. I have had similar problem with my Satellite A300-1LI and I have do this. Now notebook runs perfectly with and without AC adapter.

  • Satellite A300-1BZ Won't Boot!!!

    My laptop won't boot anymore.  The Toshiba sign pops up for a few seconds then the screen goes blank.  I have tried F8 but nothing happens.  Any ideas??? 
    Thanks

    Hi
    I found this thread and I would like to summery you issue;
    - You are not able to start the Windows OS; neither using the normal nor safe mode.
    - you are not able to boot from any bootable disks like recovery disk or other windows disk
    - you cannot recovery the notebook using the HDD image
    - You can see nothing on the screen, its black.
    - connecting external monitor does not help
    Unfortunately buddy, but it looks like a hardware malfunction something is wrong maybe the motherboard who knows
    I think the A300 should be covered by warranty therefore I would strongly recommend contacting the ASP in your country and to ask for the help!!!

  • Satellite A205-S5804 won't boot.

    My computer Satellite A205-S5804 won't boot.
    It won't run on safe mode, and it won't run the system restore.
    It remains black with a cursor, if anything at all.
    How do I get my computer back on?

    Hi
    Youve got a cursor which is flashing in the upper left corner?
    In such case you should check of the HDD has been recognized by BIOS!
    If the HDD is listed in BIOS then I would recommend checking the HDD using the drives fitness test:
    http://www.hitachigst.com/hdd/support/download.htm
    To run the drives fitness test you must download the appropriate creator or image and create a self-booting media.
    Check it!

  • Satellite L40 18P won't boot anymore

    Hello folks,
    my Satellite L40 18P won't boot anymore. All I get is the Power LED to go green. The DVD ROM drive blinks and I can open and close it - but that's it. Nothing else happens.
    Any idea in the forum what I can do to get the notebook boot again ? Or please ask questions for additional details.
    many thanks, Johi 13

    Hi,
    wow, that was fast.
    No, I can't see anything - the screen stays black. I do not hear the HDD start, neither do I hear the fan.
    This behavior appeard for the first time yesterday evening.
    Last activity was (if I remember correctly) closing the lid and sending the notebook to standby.
    So far, I haven't tested it with an external monitor.
    thanks, Johi13

  • Satellite A300-114 - Won't reinitate after screen shuts down

    Hello.
    I have a Toshiba Satellite A300-114 running with Windows Vista Home Premium.
    It was working fine until two weeks ago, now, after some time of inactivity, the screen shuts down and it won't turn on agian. The Hard drive light blips but the Screen stays black. This is becoming more often.
    Does anybody have any ideia what the problem is?
    Thanks :)

    Sorry, I'll try to write with a more correct english.
    My problem was, when I leave my laptop alone, the display shutts off, the hard drive light under the touchpad keeps bleeping, but what ever I do the system doesn't "come back". I have to hard boot the computer.
    Now, i've tried with different power settings, and the same happens, and I also found out that when i have the "Turn off the display" set for never, the computer also starts working after leaving it alone for a while.
    I'm also not able to shut down the computer, I get the blue screen and the message "Closing" and nothing happens
    Message was edited by: jjginga

  • Satellite Pro A10 won't boot up - Where to get the disks

    I have a Satellite Pro A10 which currently won't boot up Windows (XP) as it says
    The following file is corrupt or damaged:
    C:\Windows\System32\Config\System
    The Tools & Utilities CD-Rom which came with my laptop has unfortunately been scratched and won't boot.
    I have the two System Recovery Disks, which are fine.
    My questions:
    1. Is it possible to purchase a replacement Tools & Utilities CD-Rom?
    2. If so, where from?
    3. Is there a way of restoring my laptop without having to completely reinstall everything and lose all my files?
    Thanks
    Message was edited by: Stuart_2007

    Regarding the point;
    a) Usually it should be possible to order the Tools & Utilities CD-Rom but I ask why?
    b) You can purchase the CD from the ASP in your country
    c) The older recovery CD supports an expert mode. You can use this mode to choose the partition where the OS should be installed. In such case only this partition will be formatted.
    But listen dude. You dont need to order the Tools & Utilities CD because on this CD you will find only the Toshiba drivers which can be downloaded from the Toshiba page too.

  • Satellite L850-161 won't boot from recovery disk

    When I got the laptop in 2012 I created 4 recovery disks but since then i've had my HDD replaced in my SATELLITE L850-161 but it has the recovery partition with nothing in it and the laptop won't boot from disk either so I can't format it but really need to, any suggestions??

    If you have 4 recovery discs be sure you start installation with disc number 1. After HDD exchange you should be able to use created recovery discs for recovery image installation.
    Does some other bootable disc starts properly?
    To be honest I dont understand how new HDDD can contain recovery partition that will be created if recovery image installation works.
    Problem is that in such situation you dont have many options. In worst case you can order original recovery disc for your machine.

  • Satellite A300 - Vista won't load, computer won't start

    Satellite A300
    Model Number: PSAGCA-02W010
    Vista will not load; have tried start up repair; system restore and starting in safe mode, none of these will work. I get the error "Error 0x80070570: The file or directory is corrupted and unreadable."
    I don't know what I have done with my recovery CD; or if I even got any with my purchase (from Harvey Norman).
    Please advise what can be done.

    Hey,
    > I don't know what I have done with my recovery CD; or if I even got any with my purchase (from Harvey Norman).
    Normally you dont get any recovery disk with the notebook because you have to create it yourself using Toshiba recovery disk but this is mentioned in user manual. Probably you have already done this and you can find the recovery disks again. ;)
    If not you have to follow the instructions posted by Andrej: You have to start HDD recovery feature to get rid of this. Enter the advanced boot menu of Windows where you can choose to start in Windows in safe mode, etc. and select Repair my computer. Vista will load some files and on new window you can choose the Toshiba HDD recovery feature.

  • Satellite Pro A10 won't boot (HDD seems to be missing)

    Hello, I hope someone can give me some advice on this problem: I have a 2 year old Satellite Pro A10. Recently it won't boot at all and I notice that if i look at the directories in the C: drive using the command prompt it says 'file not found'. Can't start Windows at all, not even in Safe Mode.
    Using the recovery disks doesn't help either I get messages like No such fixed Disk and 'Extraction Failed'.
    does this mean I have:
    1 A damaged hard disk
    2. Faulty connections to the HDD? - if so how do I rectify this?
    the system didn't crash before this happened, it failed to load up when I started it.
    Would appreciate any help.
    Thanks,
    Scl

    Jeffery and Ivan25 are correct in HDD malfunction. Try and remove and reattach the HDD and see if BIOS sees the HDD. If not you are going to need to order a replacement HDD. If BIOS does not even see the HDD then you wont even be able to install any Operating system, because there is logically nowhere to store the data being copied.
    Take it to an Authorized service provider near you to have it checked out. Could also very well be the HDD Controller on the Motherboard has went bad and can not detect any HDD connected to the motherboard even if it is new and unused.

  • Satellite P775-S7375 Won't boot up

    Hello,
    I have a fairly new (about 4 months old) Satellite P775-S7375 that suddenly won't boot.  When I press the power button, the lights light up and I can hear a fan run for about 3 seconds, then it shuts down.
    I have tried pulling the battery, and power cable out, pressing the power button for 60 seconds, putting the power cable back in - same result.
    I tired the above,  but with putting in a fully charged battery instead of the power cable - same result.  This laptop is not even getting to the intal spalsh screen or BIOS screen.  It's literally turning itself off after about 3 seconds.
    Any idea on what I should try or is this a dead laptop needing to be sent back to Toshiba for service?
    Thanks!

    It was the motherboard.  I shipped it back to Toshiba and they fixed it.  Unfortunately for me, their quality control is awful and they forgot to reattach the DVD drive to the case.  A tiny screw is missing. So now when I eject a CD/DVD the whole drive slides out of the bay.
    After spending the better part of an hour on the phone with the support staff (which involved me being transferred to a number that was no longer working, then being transferred to a repair depot phone that said their hours were M-F 8am-8pm EST and oh, they're closed right now even though it is 11am on Monday???), I have to ship the laptop back across the country so someone can put in a $.01 screw and ship it back across the country.
    I've learned my lesson about Toshiba.

  • Satellite C870D-12F won't boot Win8

    Hi
    My Satellite won't boot (windows 8) anymore, and I'm also not able to reset to factory settings.
    The harddisk is still ok if I put it in another PC I can see all the partitions.
    Does anyone sees something wrong in the partition type or properties?
    Thanks in advance for any help.
    Kindest regards
    +Message was edited: part of the message has been removed+

    Hi All
    No help was afforded ,so I fixed it myself!! And WITHOUT the recovery medium.
    I installed windows 8.1 again from a downloaded iso (I didn't had a key for this version).
    Now I had an unregisterd windows running but "Recovery back to Factory setting" was still not available.
    But I was able to get the recovery partition to be recognized again with this procedure
    I downloaded Visual BCD: In here I check alt the path's in the BCD store and especially if the GUID of the "Windows Recovery Environment" is the same as the one used for "recoverysequence" in your "OS loader". You can also get here the WinReBCD id (GUID), you will need this in ReAgent.xml
    A GUID looks like this: {ecca5163-d630-9447-a175-fc367f40a9e5}
    Second thing: check in c:\windows\system32\recovery\Reagent.xml that
    WinReBCD, ImageLocation, PBRImageLocation, DownlevelWinreLocation and OSInstallationLocation are pointing to the right "path, GUID and Offset".
    +In my case ImageLocation, PBRImageLocation and DownlevelWinreLocation point to partition 1 (first on).+
    +OSInstallationLocation points to partition 6 (last one)+
    +example:+
    +<ImageLocation path="\Recovery\WindowsRE" id="0" *offset="1048576"* guid="{ecca5163-d630-9447-a175-fc367f40a9e5}"/>+

  • Satellite C655-S5128 won't boot up

    Satellite C655-S5128 shut down due to low battery before we could get charger plugged in.  Now it won't boot up.  It's stuck on the Toshiba logo page that also says to press F2 or F12 for setup/boot options.  There's also a faint beeping sound we've never heard before. After a while of pushing buttons an error message popped up stating no bootable device can be found.  Any suggestions are appreciated.

    Satellite C655-S5128
    Let's try a proper system reset, and see if this helps bring your laptop back.  Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, when you see the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows again.
    Let us know what happens. Good luck.
    Mike

  • Satellite L20-260 won't boot up, everytime it freezes with no reasons

    Hi all,
    I've got a sad problem with my satellite, after 3-4 days I've installed a new OS (i've tried with XP SP2 and Kubuntu) system won't boot up, everytime it freezes with no reasons, the only way is to perferom a new OS installation. Could it be an hardware problem maybe related to RAM or HDD?
    10x, Daniele.

    Hi
    This is not easy to say if the problem is software or hardware related.
    You should install the OS from the Toshiba recovery CD and test the functionality again
    If the notebook will start freezes again immediately after recovery CD installation then it could be a hardware problem.
    You could try to use the MemTest 3.5 tool.
    It checks the memory for malfunction.

  • Satellite A40-231 won't boot after wrong firmware update

    Hi,
    i own a toshiba satellite a40-231.it won't boot anymore because i have flashed it's dvd-rw drive(sdr-6112) with the wrong firmware and i also made a big mistake making a non-bootable active dos partition,trying to flash the correct firmware.So, my question is: can i boot from usb flash disk?i believe it's the only option i have left, if not network boot.
    Thanks in advance!

    Hi
    As far as I know its not possible to boot from any other devices as from USB FDD / HDD / CD-ROM / LAN
    You could boot from network but if you want to install the OS via LAN you will need an RIS server. But its not very easy to do it without any additional experience. So I think this option is nothing for you.
    It seems the drive is dead or malfunctions and therefore the best idea is to replace the device drive. I know, its hard to hear that but I dont see any other solution

Maybe you are looking for

  • How do i use my apple remote on my macbook pro

    how do i use my apple remote on my macbook pro?

  • Why won't it let me download apps?

    I just got my iphone 5s last night, and I proceeded to download all the apps I wanted until I came across one that said I needed to update, so I updated my phone and in the morning I downloaded that app and one more, after which when I tried to downl

  • Error when trying to connect to memory card on Officejet Pro 8600 in WLAN

    Hi All, Since I upgraded my MacBook Pro and iMac to Mavericks I can no longer access my memory card that is inserted to my HP Officjet Pro 8600. Connection is WLAN infrastructure. However I also tried the Wireless Direct connection (no router) but st

  • DNB integration with FSCM SAP Credit management

    Hi, Any body worked on or integrated  DNB  with FSCM SAP Credit management ? if it is please share some information /document on integration. Thx DD

  • Invoking "this" from within a function

    Assume we are in this situation: mc.onRollover=function() trace(this); function dosmthing() trace(this); The first trace(this) would render the path of the movieclip, mc. The second one, however, would render "undefined". Is there a way of retrieving