Satellite A300-1LT PSAGCE - Cant get resolution higher than 1280x800 on external monitor

I have toshiba Satellite A300-1LT PSAGCE, and I connected additional profeccional monitor LP3065, but I cant get resolution higher than 1280x800, and this only works over HDMI, via VGA output i get only black screen.
Any suggestions?

Hi
As far as I know the internal LCD supports this resolution:
800x600 16bit/32bit(Clean stretch)
1024x768 16bit/32bit(Clean stretch)
1280x800(W) 16bit/32bit
For _external_ monitor these resolutions are supported:
800x600 16bit/32bit colors(Depending on CRT)
1024x768 16bit/32bit colors(Depending on CRT)
1280x1024 16bit/32bit colors(Depending on CRT)
1440x900(W) 16bit/32bit colors(Depending on CRT)
1600x1200 16bit/32bit colors(Depending on CRT)
1680x1050 16bit/32bit colors(Depending on CRT)
1920x1200(W) 16bit/32bit colors(Depending on CRT)
1920x1440 16bit/32bit colors(Depending on CRT)
2048x1536 16bit/32bit colors(Depending on CRT)
Note: the vertical refresh rate is also limited to the each resolution:
800x600 85Hz (Depending on CRT)
1024x768 85Hz (Depending on CRT)
1280x1024 85Hz (Depending on CRT)
1440x900(W) 60Hz (Depending on CRT)
1600x1200 85Hz (Depending on CRT)
1680x1050 60Hz (Depending on CRT)
1920x1200(W) 60Hz (Depending on CRT)
1920x1440 75Hz(Depending on CRT)
2048x1536 60Hz(Depending on CRT)

Similar Messages

Satellite A300-1LT - Webcam driver for Windows 7

Hi,
I have a problem with my webcam driver just after installing Windows 7 on my Satellite A300-1LT, I had win XP before and it works fine. In downloads is offered just for xp, vista 32-bit and 64-bit driver (I tried all with same results). Webcam app starts with windows and gives me an error msg that I must reinstall or install new webcam driver. Webcam work in eg. skype buth with (very) poor quality.
I tried to find wich cam is integrated ( chicony? ) also but nothing.
Does enyone else had experienced this issue and know how to resolve it ? please help...

Hi glava11,
As far as I know you can also use the webcam driver for Satellite A500 because its equipped with Chicony webcam too.
So have a look for A500 downloads. There you can find Windows 7 driver for webcam that should work on your model too.
Check this!!!

Re: What WLan driver do I need for Satellite A300-1GN PSAGCE

Hallo people.....
I need help for my friend....
We have here a laptop Toshiba Satellite A300-1GN (PSAGCE) and in Toshiba driver page, for each card has two or three companies....
For example for wireless LAN, has Realtek, Atheros, Intel....which is the right??
Where can i see that???
I must also refer that when I am trying to download one of wireless LAN driver, I see a message, that I don't have the permission to view this page....
What can i do????
Now as a result, I have 4 yellows in device manager.
Three basic system things and wireless lan......
Please help!!!!!!! Thanks in advance.......

Hi
As Im not mistaken the Satellite A300-1GN supports the Wlan card Intel 802.11 a/g/n and you could find the WLan drive on the Toshiba WLan portal:
http://aps2.toshiba-tro.de/wlan/
Greets

Re: Win 7 64bit driver request for Satellite A300-247 PSAGCE

Hello everyone,
I have an Satellite A300-247 PSAGCE With the Vista operating system and I want to replace to Windows 7 64-bit I do not know which driver should prepare before formatting?
Video card Driver not found too?
Thank you all oren !!

> can not touch pad scroll up with the finger ?
Download the touchpad driver released for newer notebook series for example A660 or other
> I had a web camera Software can not find ?
The same like touchpad driver you can use the software from other notebook series where Win 7 64bit is fully supported.
> The lighting of the Touch buttons Always on And you can not turn off?
This option is placed in BIOS. Its called Illumination and you can enable and disable this in BIOS.

Satellite A300-1LT won't boot up - blank screen & no HDD activity

I had a problem, touch pad won't work.
I found on internet solution to shut down computer, take out battery, wait a little bit, and start again.
That is when my problems start.
When I placed battery back on, i turned on the laptop.
Blank screen (nothing happens), led indicators are on (except for hdd), cd drive tries to read but nothing happens, and the fan is on.
I tried everything that I could find (wait for 30 min, take battery out, start without battery, etc...) but no luck.
My lap top is Satellite A300-1lt, and I had it for 2 months.
I don't want to take it to service, unless it is really necessary, because i really need it now, I can't wait for weeks until it is returned.
Can please somebody help me out, Im desperate....
Thanks in advantage...

Connect your notebook (with battery) to the AC power supply and leave it an hour and try to start your notebook again. If notebook starts again leave it running until the battery will be full charged again.
I hope it will work properly again. I have had similar problem with my Satellite A300-1LI and I have do this. Now notebook runs perfectly with and without AC adapter.

I CANT GET 5.1 SOUND CONECTING A EXTERNAL DVD PLAYER TO SPDIF

I CANT GET 5. SOUND CONECTING A EXTERNAL DVD PLAYER TO SPDIF OF?MY?LIVE DRIVE SOUND BLASTER LIVE 5. PLATINUM, WHY NOT? IS THE SPDIF LIVE DRIVE IN STEREO ONLY?

?[b][url="http://www.soundblaster.com/products/product.asp?category=&subcategory=207&product=484& nav=0]Sound Blaster Li've 5. can't decode AC3/DTS via hardware only with software[/url][/b][b][/b]?[b]MOVIES[/b]
[b]Cinematic Surround Sound in Movies[/b]
[list][*]Enjoy captivating 5. multi-channel surround sound with CMSS. [color="#ff0000"]Works with any software DVD-Player that supports Dolby Digital or DTS decoding for cinema-like movie experience.<[/list]?[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=270]Digital Connections, SPDIF and Dolby Digital Info[/url]?[b]Digital Connections[/b]Digital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material)?through which the signal travels. [color="#ff0000"]The thing to remember about digital is that for ordinary, uncompressed?sound, it will only carry a stereo signal.
So, if you like to use CMSS with your music, or you try the speaker test function,?optical/coax is useless as you only hear the front left/right speakers.?Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded?audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder.?This is where your optical/coax connection is used. To?go down this route, you must first have a?set of speakers or a decoder that?supports Dolby Digital.
In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in?your?soundcard options. What this does is?tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your?digital speakers/receiver will do all the decoding to give you full surround sound.
Please note that this?is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster ?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.?If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature,? you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right?sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

What is the part number of MB of Satellite A300-1L0 PSAGCE

Hi
I've got Toshiba A300-1L0 Model NO.PSAGCE-03100UGR.
But there is a problem with graphic adapter ATI 3450 (M82 chipset). After installing proper drivers I got blue screen when Windows starts - and it is written that file ati2....dll gives the problem. The same situation happens both on Windows XP and VISTA.
What is the part number of mentioned notebook mainboard? I'm planning of selling every part of this notebook that is why I would like to know the part number.

Hi
Not sure exactly if the part number is the same but the PT10G_6050A2171501_MB_A03 motherboard is compatible with Satellite A300-1QD, A300-1GC and A300-1L0
But I dont know why the part number is so important you can describe the motherboard as a mobo for Satellite A300 PSAGCE series.
There are different Satellite A300-xxx which belongs to the PSAGCE family and this motherboard would be compatible with all these notebooks

Satellite Pro L40 - I cant get any software download

I have had to use the Toshiba Product recovery disc but now I cant get any software download, everytime I try all I get is Unknown Publisher!!!
Can anyone help or advise me what I can do to fix this problem, Thanx

Hi!
To be honest I dont know what you mean.
What software do you try to download and where do you download them? What OS do you have?
Can you post a screenshot or something else?
I dont know what internet browser do you use but I use always Firefox and never had problems with this browser.
Bye

Rome Total War won't let me play at resolutions higher than 1024x768

Laptop is a GE70 2PE Apache Pro
Every other game lets me play up to 1920x1080 but for some strange reason RTW won't go higher than 1024x768. And yes I forced the the game to use the Nvidia GPU in the Nvidia Controll panel. And yes I'm in "High Performance Mode." And yes I'm on AC power. And yes it's the Steam version. I've tried everything I can think of, to no avail. Please help.:(:(

Please take a look, bro.
http://steamcommunity.com/app/4760/discussions/search/?q=resolution
It's nothing related to the laptop but the game itself.

Has anyone had any luck compressing videos with resolutions higher than 1080?

Everytime I try, it fails instantly. Is this not allowed in Compressor 4? It was possible in Compressor 3.

I have a 4K video that I'd like to compress using H.264 or X.264 and restrict the data rate.
Here are some details of the video (created in Motion) I am trying to compress:
DIMENSIONS: 4096 x 2048
FORMAT: H.264
FPS: 24
DATA SIZE: 53.2 MB
DATA RATE: 52.03 MB
and here are settings that I would like to compress it with using Compressor 4.0.4:
CODEC: H.264 or X.264 (both fail)
FRAME RATE: current
KEY FRAMES: Automatic
DATA RATE: Restricted to 7000 kbits/sec (setting it to automatic or any other data rate also fails)
QUALITY: Best
HEIGHT AND WIDTH: 100% of source
I have been able to get a successful compression with this 4K video file using ProRes 422, so that leads me to think this is a codec problem, not a Compressor application problem. Furthermore, I have had the same problem just using Quicktime 7 to export a video with these settings, I get the same failed results.
In Compressor it gives me the message Failed: Quicktime Error: -108
and in Quicktime 7 it gives me the message Failed: qKitErrorCatchAll (-6662)
So, if you had any suggestions about a better codec to use, one that allows me to restrict the data rate on higher than 1080 video files, it would be much appreciated.
Thanks
Evan

Option of changing video resolution higher than 360p just disappeared on youtube, when I use chrome everything is fine. why?

There is just no more resolutions either than 360p on that list when I use Firefox.

This happens in safe mode:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
Also try turn off the hardware acceleration:
*[https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration Upgrade your graphics drivers to use hardware acceleration and WebGL]
Also:
*[http://www.mozilla.org/en-US/plugincheck/ Check plugins]

How do I get 16x9 aspect ration on an external monitor?

I'm connected to a huge monitor but can only choose resolutions that are 4x3 - and the monitor is 16x9.
Is my VGA connection restricting it? Will the option become available if I use HDMI? I just haven't bought the connections yet, but would definitely do it if that would help my problem.
I came across the app Display Maestro, and was about to try it, but the reviews say the latest release don't really let the app do what it says anymore anyway.
Any ideas?

Like with your LG Flatron use DVI instead of VGA.
My new Quad Core iMac Not Getting Along...: Apple Support Communities

How do I get a video signal to an external monitor via the mini-display port on my Mac Book Air?

I can't get a video signal out through my mini-display port on my Mac Book Air (version 1). Thus I can't feed BBC iPlayer to an external monitor. There is some connectivity - the MAC wallpaper is broadcast, the mouse pointer is visible and sound is transferred. Is it likely to be a cable connection problem (though the cable works with a Windows operating laptop)?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

I was trying to extent monitor, I get black screen on laptop and external monitor :/

so I have this hdmi cable that plugs into the DVI on my external monitor.
I did get the screen to show up just on the external monitor and that's it. Now, when I boot up my lap top I get black screen on both monitors. Uh oh.
I've unpugged the monitor, batter, all that stuff.
I think it's possible I clicked on don't display external monitor or something, but not it's not displaying anywhere.
I have an idea pad of some sorts w/ windows 8. I don't think it's 8.1
thanks
-Hayes

so I got this resolved. the guy at the computer store hit f10 and then enter. he did this while the screen was black
shouldnt' it just detect that there's not an external monitor? but even when there was a monitor connected, both screens were black.
/thread

Satellite A300-1LT PSAGCE - Cant get resolution higher than 1280x800 on external monitor

Similar Messages

Maybe you are looking for