Satellite A300-1NO - Wakes up from standby mode

Hi all!
I have got a Satellite A300-1NO with Win XP pro.
The problem is, that the laptop wakes up from standby mode automatically after about 5 minutes.
I tried to unplug all cables (LAN, usb, etc) but the power plug, but it's the same result.
So what can cause this? What should I try?
thanks.

You should disable the Wake up on LAN function in BIOS and Windows.
Check the BIOS for this option!
You can disable this feature in Windows if you right click on the network card > properties > advanced > wake on LAN
I hope it works for you.

Similar Messages

Mac Mini late 2012 with Mavericks don't wake up from standby mode

My Mac minin used to run with OS X ML 24/7 without any problem. After Update to Mavericks the Mac won't recover from standby mode. I have to power off the mac.
I cleared nvram, pram, installed Mavericks second time.
What can I do? Return to Mountain Lion?

I gave Mavericks a second try. It failed. Made clean install ofe mavericks, setup user manually, reinstalled my most needed applications. The mac mini will not wake up from standby mode (blanc screen -> must reboot/hard reset; spinning beachball -> hard reset)
I reset nvram and pram.
Any advice? any chance to get informations by apple?
rgds

T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

Satellite L850-13R wakes up from standby with no reason

My L850 wakes up from standby every 10-20 minutes and after some time goes to standby again.
All power options are set as they should be (that means no wake on battery and even no wake up on power).
Problem is that this is my business notebook and I moves around with me so I could expect HD errors, not to mention battery life (I found it with dead battery this morning).
I have the latest firmware available (1.60)...
Anybody else facing this problem ?

In case anybody has similar problems one of the solutions could be:
IN registry look for
HKLM\System\CurrentControlSet\Control\CrashControl \DumpFilters
where you'll find a list of drivers that can possibly prevent standby (dumpfve.sys seems to always be there so don't touch it).
For other drivers remove the programs that installed them (I had MfeEpeHb.sys) or
do something not recommended and remove the lines with drivers you're suspecting prevent successful hibernation).
Eg. modify DumpFilters from
[DumpFilters]
MfeEpeHb.sys
dumpfve.sys
to:
[DumpFilters]
dumpfve.sys
That did the trick for me.
Hibernation tested and works without any problem

Satellite A300-1NO - How can I record sound?

Hello. I've got a Satellite A300-1NO machine, but I don't know how to set my sound card, because I want to record any sound that my sound card plays. For example listening an internet radio and record a track from it.
I can only set my microphone to record it, and can't see any more opportunity. Waveout or anything else....How could i solve this problem? I've got the 6.0.1.5599 sound driver.

Hello
If you want to record the sound that plays the sound card you need an additional program. So its not possible to record sound only with the sound driver.
There are many programs that can do this. I have good experience with No23 Recorder. Use Google to find it. Its freeware and easy to use.
Furthermore there are some programs that streams internet radio and record it too. But I dont use such a program but Google can help you to find one.
Greets

Mac Mini wakes up from standby automatically

Hi,
My Mac Mini wakes up from standby automatically. Waking up via network is disabled and I use an Airport Extreme, a USB mouse (not from Apple) and a wireless Apple keyboard. OS X version is 10.5.8.
I have the Mac Mini since about 10 months now. Almost 1 month after I bought it, I had the this problem but thought I am doing something wrong or my wife has forgotten to turn it off
After a while it was OK. About 3 months later it startet waking up by itself again. I called Apple Care (although the 3 months support was over). They tried to help, but there was no progress. It waked up again and again. After about 1 month it was OK again without me having done anything, no installations, no system updates.
One week ago, the Mac found some updates at Apple and installed them. Since then I have again the problem! I contacted again Apple Care and again they could not help. They just want me to pay for an extension of the Apple Care package, although they could not help me in this case!
Now I want to try it myself getting support by people in this forum. I hope there is someone with experience about this case.
I am not much experienced with OS X, but I will try to answer questions that could help me resolve this problem.
BTW, I searched for a similar topic and found one ("My MacMini always wakes up from standby") but in that case the wake up feature is activated by the user. In my case this feature is deactivated, as mentioned above.
Thanks
Cheers
Quartz84

Hi,
sorry for the delay, but I was on a business trip.
@Bsteely: Sometimes it wakes up immediately because of loosing connection to the keaboard when I send it to sleep. I suppose at the beginning of the sleep mode it into sleep mode, the keaboard connection is closed, then the keyboard "thinks" there is a problem and sends a message to the mini and the mini just wakes up again showing that the connection to the keyboard was lost but established again! This even happened as I had unselected the checkbox "Allow Bluetooth devices to wake up this computer" in Preferences -> Bluetooth -> Advanced.
But there are also times when the mini does not wake up so quickly. It just wakes up after hours. I had a look at Console.app as you suggested. Very weird to me indeed Well there I found something like "Wake reason = OHC2" or "Wake reason = OHC1". Unfortunately I cannot find older logs there.
@Boece: Hi and thanks for helping!
Well, I will try the update as soon as I can. By now I have no external harddisk to first save my data before doing the big update. But I am going to buy one soon.
Well turning off the monitor is OK, but the harddisk can wake up anytime while the mini is turned on as the OS might need to do something from time to time. And I don't want my computer to consume electricity even if it is such a small one like the mini. I'm a kind of green dude (but not from Mars ). And the sleep mode is interesting for me as I have very often many different Internet sites and some applications running, so I don't need to close them before turning off and open all of them again when turning on the mini.
Regarding other IR devices: The only IR device now is the keyboard. I even took out the batteries and the mini still woke up over the night!
Thanks again for your support guys. Please let me know if you have any further information of ideas.
Cheers
Quartz84

Mac Pro will not wake up from sleep mode

Hi,
In my Energy Saver I have my system set to go to sleep after 15 minutes of not being used. Unfortuantely, when I try to wake the system up from sleep mode, it freezes on the screen saver and I have to hard restart the computer to get it to turn on again. I see that this is an issue with MacBook Pros, but I'm not seeing much in the Mac Pro Towers. I did see a thread about Parallels VM causing causing OSX to not wake up from hibernation mode, but I am not always running my VM Ware when the system decides to not wake up. Any help/advice is appreciated.
Thank you,
Julia
OS X Version 10.6.7
2x 2.93 GHz 6-Core Intel Xeon

.... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
most people also move most of their user folder to another hard drive.
sounds like a more normal Mail + OS issue if just that.
hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Won't wake up from sleep mode

I have only had my iMac for a couple weeks and four times now it won't wake up from sleep mode. I have to use the on/off button for a response.

Since you have a new machine, I would call Apple immediately and have them deal with the problem.

Short flickering when the notebook wakes up from sleep mode MacBook Pro Late 2013

Hello everyone!
I have a question concerning the display of my new MacBook Pro with retina display (late 2013).
Sometimes when opening the lid when the notebook wakes up from sleep mode, the display is flickering for like two seconds. Then everything is normal again.
This specially occurs when the lid has been closed for a longer time. It makes no difference if the power adapter is plugged in or not.
Have you experienced a similar flickering with your MacBook Pro?
Thank you in advance!

Hello!
I have the same problem with my late 2012 MacBook Pro Retina. The constant flickering after being awoken from sleep was a minor annoyance for me so I contacted Apple Support.
I shall explain what I have done thus far, and I recommend you follow the same steps as I did to tick off possible causes:
Firstly, I reset my PRAM (http://support.apple.com/kb/ph14222) and SMC (ttp://support.apple.com/kb/ht3964).
The issue still remained so I checked if the flickering occurred in a new user (if it does not then it points to your account having a setting which is causing the flickering - possibly third party). For me the flickering continued so I tested it in Safe Boot (which worked fine!).
I then ran (just to be certain) the Apple Hardware Test (http://support.apple.com/kb/ht1509). All seemed to be OK. So I reinstalled OS X and still the issue remained.
It was then I had an Apple Support person 'screen share' with me and we went through certain folders. My GPU folder had an unusual amount of files so we trashed them and began a restart however this led to a bigger problem; my notebook wouldn't boot (not even in Safe Boot!), so be very weary at this stage, I'm not sure if this was a rare case or we deleted something we shouldn't have. I then had to go into recovery mode to get back to square one.
Back to the initial problem I reinstalled a 'clean' OS X version from recovery mode; this was to determine whether if the data is corrupted on my account or if it's something else; most likely hardware by now even if there was nothing that came up in the hardware test (it won't account for everything). I checked from both a backup of my data and then from a fresh user after reinstalling OS X and still the flickering continued.
It was then a Senior Apple Support person set up an appointment to have my MacBook looked at and possibly repaired (it could be a minor wire causing the problem).
That is the point I am at now, so for my case it seems like a minor hardware problem. If your case is as similar as mine I recommend making an appointment with them to run more sophisticated hardware tests that your own MacBook would not run.
I will comment again when my issue is completely resolved for those who come across this Discussion in the future.
Hope this helps!

X1C won't wake up from sleep mode using keyboard

Hi...so finally got my X1C today. One thing I am noticing is that the machine won't wake up from sleep mode when I press any key on the keyboard -- it only wake up by pressing the power key. This is a bit unexpected to me. Is it by design, and is there any way to change this?
Thanks for your help.
Solved!
Go to Solution.

Does it awaken from stand-by if you press the Fn key? That's been the ThinkPad standard for as long as I can remember.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Don´t wake up from sleep mode

Since few day, my Mac Mini didn´t wake up from sleep mode.
When i click on Mouse or Keyboard, the Mini stay´s at Sleep.
I must shut down the Mini by using the power on/off button.
Also after a few time, the Bluetooth Settings in the Bar Menu getting slower,
it needs a time to pop up the settings windows.
i use 10.8.4.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Wont wake up from standby

I've had this problem for sometime now, where it simply wont wake up from standby when it have slept for more than ≈3 hours, and I have to do a force shutdown.
Programs opened when going in standby: Google Chrome, iTunes, Skype, Dropbox, Hamachi, Google Notifier and iChat
I believe this happend after I installed World of Warcraft patch 4.3 (havn't installed anything else in the past months)

bump

NEW COMPUTER USING WINDOWS 7 WILL NOT WAKE UP FROM SLEEP MODE. I HAVE TO MANUALLY TURN IT OFF AND BACK ON.

New laptop with Windows 7 does not wake up from SLEEP MODE. I have moved the computer, moved the cursor, pushed every key on the keyboard, moved the space bar but nothing wakes it up. I always have to manually turn the computer off and then
turn it on again. I have searched the FORUM but don't see anyone having my problem. I have searched under SLEEP MODE in GETTING STARTED WITH WINDOWS 7 but I don't find where they address the different modes. Any suggestions?

Hi, I would suggest you to check allow this device to wake the computer have a tick mark.
Here are the steps:
1. Click Start, type Device manager in the search box.
2. Go to Device manager.
3. Click on keyboard, it will display your keyboard, right click and go to properties.
4. Select Power management.
5. Check Allow this device to wake the computer.
Follow the same procedure for mouse, restart the computer and check if it works properly.
I also suggest you to update your display drivers, you can logon to the manufacturers website and download the latest drivers and install.
For more information:
http://support.microsoft.com/kb/266283
Also I suggest you to run the Power troubleshooter to adjust your computer's power settings, and check if it works properly.
Here are the steps:
1. Open the Power troubleshooter by clicking the Start button, and then clicking Control Panel.
2. In the search box, type troubleshooter, and then click Troubleshooting.
3. Under System and Security, click Improve power usage.
If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, logon to:
http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter
http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
If the issue persists, please collect the Power Efficiency Report for further analysis.
Guided Help: Get a detailed Power Efficiency Diagnostics Report for your computer in
Windows 7
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Satellite A300-1NO - Wakes up from standby mode

Similar Messages

Maybe you are looking for