Satellite A300-211 - Can't start recovery disk creator

I just installed the ultraiso program, when I open the toshiba recovery disc creator this message appear
An unexpected error occurred.
please quit this application and restart it.
(error code:0D00F6-26-00000015)
with an only ok option when I press it, it appears again ,when I press ok for the second time, it disappears and the program runs. What can I do to stop that?
note: I had the same problem with the poweriso program
my lap is a A300-211

Hi mate,
Can you please tell us what happens if you uninstall ultraiso program? To be honest ths program isnt known to me, I never heard about this.
Then try it again please.
In worst case you have to start the HDD recovery option to reinstall Windows. Then you should be able to create the recovery media. For HDD recovery procedure I have founded this:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Similar Messages

Re: Satellite L500 - Error appears if I start recovery disk creator

Hi all, just tried to launch recovery media creator on the Toshiba board and the following ERROR CODE: 0d00f6-49-00000015 appears.
This goes after a few clicks on the mouse and the program starts.
Any ideas how to mend this?
Operating system is Windows 7 64bit my new shinny laptop.
any help would be great.

Do you use this tool for the first time?
This tool will work with factory settings only and nothing should be changed (preinstalled tools or partitions structure).
I am 100% sure it will work properly if you make recovery installations again. The principle how it works is the same on all new Toshiba notebooks and if this works on my brand new Satellite P500-127 and I don't see any reason why it should not works on your Satellite L500. At first start up I have installed Win7 64bit and later successfully created recovery DVDs.
As I wrote before, if possible install OS again using HDD recovery procedure as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
When installation is finished and you start OS for the first time start "Toshiba Recovery Disc Creator".

Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Hello,
I am sorry for bad English.
Satellite A300.
Conducted updating to Win7 on the program Toshiba Upgrade.
Does this program work;
TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
The program TRDCReminder did not find "Renewal of computer".
On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
If is not it these programm how to recover computer in the case of failure?
Does Tempro work in Win7?
Many thanks.
With kind regards.
Igor.

Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

Satellite A300-1G5: Recovery Disk Creator doesnt work anymore

I have created my recovery disk after buying new Toshiba A300-1G5 model laptop. That recovery disk is damaged now.
I have tried to make 2nd set of recovery disk, but the application is not working.
error message comming "---- orisetenv/setenv.ini file missing.
Please anybody help how to resume the application's (Recovery Disk Creator) functionality?
Another question--- does not Toshiba have a online help facility apart from this forum? Forum is from user, can't we (Toshiba Users) get online help from Toshiba technical team directly?
If yes please send me the route to reach.

I also have a problem with the L500 Toshiba disk creation software.
I initially installed the 32 bit version of Windows 7. I created recovery disks. I then restored the 64 bit version of windows 7 from the partition.
Somehow I managed to break the Toshiba disk creation software: it starts, opens, lets me choose what option I would like, then the screen disappears and it seems like another screen will appear, but it doesnt. It is like a process tries to fire and then just gives up and dies. The same thing occurs when starting the Disk recovery creator.
So I re-restored the 64 bit version of W7 to see if that would fix my Toshiba Disk Creator disappearing after the first screen. And yes, that did fix the problem - until I opened the DVD drive drawer whilst the software tried to access the drive. Stupid, but true. So then I was back to square one.
So now I know how to re-create the error - by opening the DVD drive drawer mid-process, but I am not sure whether I feel like taking 3 hours to restore and re-install all my software to have this happen again.
I tried to uninstall (worked) and re-install (worked) the disk creation software (tc00091600g.exe) which seemed to work successfully, but nothing changed - the same problem persists.
It is as if not everything was uninstalled or there is some kind of corruption of a program or process not ending/starting when it should.
If I knew a re-restore would solve the problem permanantly, I would re-do it, but it seems there is something wrong with the software that cannot detect an open drive and cancel the current operation without corrupting the system.
I can read DVDs and CDs on the drive and will now try to install other software to burn disks, but my gripe is that I can no longer create restore disks.
If anybody has any quick fixes or suggestions, that would be appreciated. I feel like it is only a minor issue and would only take a slight tweak to fix it, but I just dont know what that is.

Recovery disk Creator & data partition won't work - Satellite L300

My niece asked me to re-install her Toshiba Satellite L300 laptop, because the windows installation is rather buggy. She didn't have a recovery disk. Using Toshiba's Recovery Disk Creator I tried creating a recovery disk.
However, the program wouldn't start. Checking the directory of the program, it would seem that the program simply isn't there. Afterwards, I checked the data partition of the laptop.
There was a map with HDD recovery. However when using Windows' advanced boot (F8 before Windows startup) there was no choice of repairing the notebook. They only choices were the standard windows options (Save mode, normal start, etc.).
In short, it seems impossible to re-install the notebook with the current information at hand.
What would be the next course of action? Is it possible to order a recovery CD from Toshiba?
Another niece has the same notebook, would it be possible to use that notebook to create a recovery disk?
I'll appreciate and look forward to your reactions.

Hi
It looks like something has been changed on the HDD
However, fact is youve no Recovery disk and you cannot use HDD recovery option.
This means you need to order a new Recovery disk from Toshiba.
You can do this here:
https://backupmedia.toshiba.eu/landing.aspx
PS: one tip if you would use a search option of this forum, you would find the right answer too ;)

Satellite A300-211 - illumination button stopped working

Hi
How are you people ?
I have an annoying problem with my Toshiba Satellite A300-211.
I had windows vista home premium 32 bits installed on it but then i removed it and started using windows 7 ultimate 64 bits and a result of that one of the touch media buttons that is used to turn the led light on and off changed its function and started turn the sound on and off.
When i installed the value added package because the function key was not working the button stopped working. It does not turn the led light on or off or turn the sound on or off any more.
It is blinking but not working .
Can any one help ?

Hi
You can try to install the VAP using the Advanced Option.
During the installation in Advanced Option, you can unchecked the Toshiba Multimedia Button support and could try to install the VAP without this further option.
I read somewhere in this forum that this could help
However, usually the common VAP installation should fix this if it does not fix then I assume that the registry is corrupt as already mentioned by Tonny
So what to say using CCleaner might help, if not. Try to use Toshiba recovery

Satellite L - How to create a recovery disk?

Hey,
I deinstalled the Programm "Recovery Disc Creator" accidentally. But the Folder with the Win Vista Recovery Disc Informations are still in my Computer. Now i want you to help me in creating a Recovery Disc. My System is very unstable. So i want to re install it. I hope you can help me.

Sorry but why did you uninstall the recovery disk creator?
However, now you can’t create the recovery disk because you have uninstalled the program for creating the disk.
The only way I know is you use the HDD recovery option to reinstall your notebook. You can use this if you go to the advanced boot menu (F8 before Windows is booting), choose repair my computer and then select the Toshiba HDD recovery function.
Normally you get this message if you start your notebook at the first time:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+

Recovery Disk Creator Can't find HDD Recovery Area

I have bought new laptop Satellite M305-S4910
The seller said that I must be Recover my windows and my applications as soon as I bought it.
So I do what he said
Acctually, I have success to recover in 2 DVD disks of 3 disks needed. But In 1 last disk I didn't recover yet because I interupt and left it because I must done something else.
But when I try to recover again, some problem happen. The Recovery Disk Creator cant find HDD, recovery area.
How can I solve this probrem??
And
And how can I make a new HDDpartition without loosing Wind Vista 64 bit Original on my laptop??
Please help me..
THANKS

Contact Toshiba as shown in this post. Tell them that the Recovery Disk Creator was unable to create the last disk. They should provide you with replacement disks at no charge in this case.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Can my start up disk be an external - forever

This one may seem like a duffus question but I wanted to be sure!
Can my start up disk where I have OS X installed be an external drive? Not as a back up but my permenant start up drive.
I ask as my Cube only has a 20GB internal (bless it) which is straining under the weight of OS X plus all associated filage.
So was thinking could have my 60GB external HD as my Start Up drive and use the Cubes 20GB internal as just storage - can I do this?
Thanks
Rob

Thanks guys.
Right have forgotten about my 60 GB external as it is old an slow, but I also have a Lacie Big disk 250gb external which is connected via FireWire 400:
- Rotational Speed (rpm): 7200
- Interface Transfer Rate: FireWire 400 up to 400Mbits/s (50MB/s)
- Average Seek Time (Write): <10 ms
- Buffer: 8MB minimum
The internal drive on my cube is as follows:
- Rotational Speed (rpm): 5400
- Interface Transfer Rate: 66 mega-bites per second.
- Average Seek Time (Write): <9.0 ms
- Buffer: 2MB
So...I am thinking that my external is better than my internal and should improve things?
Thanks also for the advice about the upgrade - I would love to and "I would if I could but I cant" - just dont have the cash so am trying to make things better with what I already have.
Rob

Satelite Pro L300 - Can I use recovery disk to get Vista back?

On my computer i am dual booting Windows 7 and Windows Vista.
Could i get rid of Vista then later could i use the recoevery disc to recover vista?
P.S i know it wipes the whole hdd

Hi
If you have created successfully the Recovery disk using the Toshiba Recovery disk creator then youve got the Recovery disk which contains the Toshiba image.
The image is a package which contains the OS (Vista), drivers and all the stuff which was preinstalled on the notebook.
This means that if you would use the recovery disk then you would get everything like at the first day of purchase
Simply said: Yes, you can get Vista back using the Recovery disk ;)

Can Envy K203TX recovery disks be used to recover an Envy K204TX?

Hi, The first thing i did when i got my Envy K203TX notebook, was create a set of recovery disks.Then I discovered that the notebook has several issues.HP sent me an on-site tech, and the tech said these issues were caused by several faulty hardware (display panel, motherboard, and the case has a bad battery lock). He helped me return the notebook as DOA. The problem is, HP store couldn't get me another K203TX, I paid like $150 more and upgraded to an Envy K204 TX. I now have the 204TX and this notebook has no issues at all, it's as good as it can get.My recovery disk set from the Envy K203TX is still with me. Question> Can I use these disks to recover my K204TX in case disaster strikes? Or shall I throw away these disks and create a fresh set of recovery disks for this computer?

The 203 has 15.6" diagonal FHD anti-glare WLED-backlit (1920 x 1080) http://support.hp.com/us-en/document/c04529223 The 204 has 15.6" diagonal FHD WLED-backlit touch screen (1920 x 1080) http://support.hp.com/us-en/document/c04529254 I would save the old disks but make a new set from the new laptop as it has touch screen. REO

Can't make recovery disk for pavillion

Can't crete recovery disk or flashdrive for HP pavillion 15 n0 28 US 243. Computer recognizes media but
recovery manager does not. Sits and spins wheels. New laptop Purchase yesterday. please help.
Windows 8

Thank you for replying. Hope you get your problem resolved! We just called hp helpline and are (hopefully) getting ours resolved with using a disk for back up....the strange thing we found was this statement regarding the flashdrive How to: my (laptop is windows 8)
copied from site:
Follow these steps to save a recovery image to a USB flash drive.
Before you startUse blank, high-quality USB flash drive no greater than 32GB and one that is (NOT) branded as Windows 8 compatible.
When I bought the computer yesterday, the salesman showed me the specific flashdrive to use......
and on the back of the package it says compatible with OS including windows 8.... maybe that was the problem.
I was Trying to use a windows 8 compatible flashdrive with a windows 8 OS ....I'm not techy so I'm clueless.

HDD recovery issues and recovery disk creator issues

Hello there,
I have been trying for the life of me to use the HDD on my Satellite A205-S5804 lap top.It came preinstalled with vista
To no avail once selected it just starts the pc and never goes to the options. I have also tried to download the software needed to create my own and restore my pc to factory. Am I only left to purchase the recovery disks needed to restore my pc to factory condition.
I have also tried running as admin to make these changes and it keeps telling me to enter admin password that I never created.
Is there a download available to restore the HDD function or to complete the download so I can use the Hard drive recovery disk creator..
Help please.
Mary

Ohh, Im sorry miss..I do apologize..
So, you're saying that you were able to do the recovery without the discs before??
Did you do the recovery or did you do a system restore??
If you really did the recovery and it is not allowing you to continue, try doing this one..
Turn OFF the laptop, unplug the charger then remove the battery.
Put them back together..
Turn ON the laptop, just as you press the power button, start tapping F2 keeps on tapping it until you see the BIOS set up utility screen. Hit F9 to load the BIOS to its default then choose yes. Hit F10 to save and exit then choose yes.
Wait for the laptop to boot then try doing the recovery again if it will not boot up.
If the recovery will not work, possible problem with the HDD since the recovery partition is saved on the HDD.

Downloading the recovery disk creator

Laptop hard drive died, well the first two partitions are corrupted, tons of bad sectors. I was able to backup the recovery partition which I wanted to copy to the replacement drive. How can I create recovery disks now with just the recovery partition? Is there a place to download the disk creator?

Satellite C655-S5049
Recovery disks will restore the hard disk to its original out-of-the-box contents shown in the spec above.
For the whole story, see the section Recovering the Internal Storage Drive, which begins on p. 59 of the User's Guide.
Satellite C640/C650 Series User’s Guide
-Jerry

Satellite A300-211 - Can't start recovery disk creator

Similar Messages

Maybe you are looking for