Satellite A300-24z - VAP - buttons illumination doesn't work properly

Sorry about my English.
I have notebook Satellite A300-24z, Model number PSAG8E and Vista 32 bit.
I try to setup this driver and keys up the numbers are not having light.
I try to do this 3 times and still is not working.
Can somebody help me?

To be honest I don't know what do you mean with format the windows with the folder of drivres by mistake.
Can you use these buttons? Do they work?
Do you have problem with illumination only?
Open Toshiba Assist (shortcut is on desktop) and go to optimize. I think there you can find option to start Toshiba hardware settings. if I am remembering well there is tab called illumination or so. Check if this option is enabled or disabled there.
Check also BIOS settings. In advanced option you can also find settings for ON/OFF illumination.

Similar Messages

Satellite P500-127: microphone or sound doesn't work properly using skype

Hi Toshiba team,
Recently bought a new notebook.
However the microphone or sound driver (connexant pebble high definition ) doesn't work properly when using skype. Also read about this matter in various forums such as the skype forum.
People encountered similar problems such as:
We can usually talk for a bit longer than 20 seconds, however the call will drop at a random time between 1 and 15 minutes. The strange part is that sometimes the quality of the call is good, but more than often my friend can only hear *half of what I am saying* while I usually do not have a problem hearing what has been said. The video will work so my friend can see me talking but can simply not really hear what I am saying.
Before the drop the call will usually freeze for a couple of seconds and then skype sometimes crashes. We have tried talking together without the video, however the problem remains.
I also found a suggestion by the toshiba service, just to simply increase the volume under control panel etc, but it doesn't work either..
Can you please help me on this one?
Cannot use skype at all as it just to annoying for everyone I talk to.. Quality is just to poor!!
Many many thanks
+Message was edited: link has been removed - not allowed+

Hi
Every day I use Skype with the internal webcam, microphone and speakers but I didnt have any problems as yet.
In your case I would try updating the drivers. Therefore download the latest sound and webcam driver (microphone is a part of webcam). Both you can get here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If your friend cant hear you, check also the settings for internal microphone. I have activated microphone boost in Windows sound settings so I could improve the microphone quality.
By the way: Do you use the latest version of Skype? With older Skype version I had also some problems on Windows 7. As far as I know only newest version is fully Windows 7 compatible.

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Lightroom 5: start button in the presentation module doesn't work properly

Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
Regards Eugene

start button in the presentation mudule
Can you clarify?
There is no start button nor a presentation module.
Do you mean the Play button in the Slideshow module?
Which operating system?

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

The middle button on my iphone 4 doesn't work properly what can I do about it?

the middle button on my iphone 4 doesn't work properly what can I do about it?

Make an appointment with the genius and bring to the Apple Store.

Undo button indesign doesn't work

Hey guys,
I made a dossier in indesign (mac) for my design class and I worked over 24 hours on it.
Tomorrow, I have to hand it in, but then yesterday suddenly my SAVE, SAVE AS, and UNDO and REDO buttons didn't work anymore! So I let the laptop like it was and today I worked again on it,
but I accidentally deleated the wrong layer and now THE WHOLE DOSSIER IS DELEATED!
I can't undo it, because the button still doesn't work and I'm lucky that some hours ago, I exported the data as a PDF-file which thankfully worked, but there are still hours of hard work missing and now my project is not finished!
Can anyone help me? Please, I'm freaking out right now!!

No, you'll never get back any changes you made between the last save and the time the file was closed. If that was three hours work, that's unfortunate. My advice was simply a way for you to recover as much of your work as possible so you wouldn't need to start over from nothing.
Consider this as a good lesson in workflow habits. Save often, and I recommend doing a Save As with a new versioning name (I append a number) at each major change point where you are about to branchin a new direction. This gives you not only a set of backup files, but the ability to easily go back to a previous version and go in a new direction.
It's also good to develop the habit of hitting Cmd-Z (Ctrl-Z on Windows) for Undo immediately after you make a mistake, though it sounds like you actually tried to do this. File > Revert can be helpful too, if you've been saving right along.

S60 menu buttons lighting doesn't work

Hello all, On Lenovo S60, menu buttons lighting doesn't work. Is that normal and supposed to be like that, or it is some kind of bug?
Thanks!

S60 does not have backlit on the Recent, Home and Back button.
Thanks.

Iphone 5 update to IOS7.0.2: on/off button doesn't work properly

Since I updated my iphone5 to IOS 7.0.2 the on/off button doesn't work properly. When i try to restart it, it takes pictures from desktop and fails constantly

Hey rcaudillo,
Thanks for the question. I understand you are experiencing issues with your Sleep/Wake button. The following article outlines some troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Sleep/Wake button will not lock or unlock iPhone
1. To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
2. To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
3. If either of the above steps don't work, try turning iPhone off and then on again.
4. If the iPhone will not power off, reset it.
5. Try to lock or unlock the phone.
If you continue to have issues, we may need to isolate the issue further to determine if it is hardware related. The best way to do this would be to restore your iPhone as new:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

Could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!

could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!???

i made a "playlist" and did some aac-version, because i need the songs for different length of time. but some of this songs i need the same way (i teaching aqua gym lessons). and earlier i could made a copy and past and it worked. but now, nothing worked! everytime something is different.
sorry, actually i am not so good in english to explain my problems i prefere german.

I got problem with home button it doesn't work but the touch ID is working ( I have 5S)

I have the new iPhone 5S.
And the problem is the home button it doesn't work but the touch ID is working.
I don't think the button is broken.

Hey! I just read something about it on a post by iPhone 4S Stuck at boot showing [NAND] ? at the end of the second page..... It is a lot of work by it depends on you if you want to try.... at the end if not working as varjak paw quoted you may have to replace it...... but don't give up!!!!

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
Thank you,
Cabula, Brazil

There are two ways to run the recovery DVD, one is from Windows. Instead power ont he computer with the disk in the drive. And imediatly after powering on start pressing the F12 key. After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from. Try that and let us know if you got the boot menu, and if the disk worked.
This signature left intentionally blank.

Satellite A300-24z - VAP - buttons illumination doesn't work properly

Similar Messages

Maybe you are looking for