Satellite A300 - Display doesn't work correclty

Hi
I have a problem with my laptop Toshiba Satellite A300.
I'm get frizzing color screen that after it I cannot log to the window I have send it back to the agent they told me everything is ok and fixed but I steel getting it,
and this is the picture for what I get:
http://www.postimage.org/image.php?v=aV2jkB5r

Hi alawi
I understand your point of view and your reaction. Its always pity if something will go wrong with a new product
But we can only discuss here in forum about the solutions or further handling and fact is that there is only one solution.
You have to contact always the ASP in your country if the hardware issue has been developed on your machine this is a fact and the ASP is your contact person.
Im sure the guys will help you maybe an additional part must be replaced which was not fixed at first time.
Bye mate and good luck

Similar Messages

  • Webcam on Satellite A300-1MX doesn't work properly

    After my windows Vista system crashed on Dec 16 2011, I had the recovery done.
    After that, I didn't find any webcam driver on the whole laptop. On the support page of Toshiba I finally found version 1.7, but that doesn't work at all!
    It always shows up: Webcam driver open fail, please restart camera or computer. As it is a built in camera I tried it with the restart of the computer, but that didn't help at all. So I tried it with the option to repair the driver with Install Shield Wizard. The program has done something, but without any success.
    So I uninstalled it and reinstalled it and it didn't help at all!
    Has somebody an idea?

    Hi
    Found a Toshiba knowledge base article which describes this error and provides a solution to this issue.
    +Why does the error message display: "Webcam driver open fail. Restart camera or computer."?+
    +http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+
    But its related to Portege M600, and Satellite U300 only.
    However, you should also try to perform a BIOS update. After that set the BIOS to default settings and save the changes. Then try to reinstall the webcam software once again.
    You should also check the device manager. Here in device manager the webcam should be recognized as a USB device if this is not the case then this means that the webcam has not been recognized by OS and this means that there could be an hardware issue
    As far as I know the webcam is connected to the USB controller on the motherboard. If the cable connection is lose, then the webcam would not be recognized in device manager; neither as USB device nor an unknown device.

  • IMac - Display doesn´t work after restart

    My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
    If I turn it off and wait 3 or 4 hours  and then turn it back on the display works OK.
    This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
    BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

    To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

  • Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

    Hi,
    After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
    Does anyone have similar experience. Anyway to fix it?
    Thanks,
    Henrik

    Have done some further investigating (to no avail).  The TV is displaying in my system Info as follows:
    Intel HD Graphics 3000:
      Chipset Model: Intel HD Graphics 3000
      Type: GPU
      Bus: Built-In
      VRAM (Total): 384 MB
      Vendor: Intel (0x8086)
      Device ID: 0x0116
      Revision ID: 0x0009
      Displays:
    Color LCD:
      Display Type: LCD
      Resolution: 1440 x 900
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
      Connection Type: DisplayPort
    TOSHIBA-TV:
      Resolution: 1920 x 1080 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Television: Yes
    But nothing on the screen.
    Does anyone know if Apple have banned certain screens????

  • Apple Store said my display doesn't work but offered no solutions.

    Just got back from the Apple Store. They confirmed my iPad is fine but the display doesn't work. It's black. Their only option was to pay $300 for a new iPad. Mine is only 88 days out of warranty and I took it in the store once already for the display issue that led to its ultimate demise. To talk to anyone else is $20. I refuse to pay more for a product that has shown itself to be unreliable. What's the next step? I truly feel wronged. iPad is in perfect physical condition.

    I took it in in May of last year. The screen has black bars flash, the screen goes black for a moment, and then it comes back on. It can be days between the issue. When I took it in, it didn't do it. I had to wait forever even with an appointment. I didn't want to take it back in even though it has been having the issue all along. There was no way of knowing when it would happen. It finally flashed and never came back on.

  • New motherboard in GT680 - display doesn't work!

    Hi!
    I had to replace motherboard in my GT680. I've put ms16f21 version 1.2 in, the only difference between new and old motherboard is the version. 1.1 is used in GT680, and 1.2 is used in GT683. I've read somewhere there's no difference between these motherboards, so my GT680 should work with version 1.2.
    And it turns out my display doesn't work now . Does anybody know what might be wrong? I've checked connections and battery on motherboard, and everything seems to be placed where it should be.
    I thought it may be because of my graphic card. I've got 460M (standard for GT680), and GT683 usually have 560M. Do you think I might have to upgrade gpu too?
    Ps. Please don't tell me it's best to ask MSI support, I wouldn't write on forum it that solved the problem .
    Thanks in advance:)

    Quote from: SialeQ on 11-June-13, 04:51:09
    Defective motherboard is quite likely, I just wanted to rule out any other possibility before I contact a seller I'll do one more test tomorrow, I'll put the old motherboard back. If it works, new board is probably damaged and I'll have to contact seller. If old board doesn't work either, then I messed up something when putting laptop together (or another component magically decided to die)
    I'm not sure if MSI would replace it, I bought it second hand on ebay, and both warranty seals (on case & on graphic card) are broken :/
    The seals being broken won't void the warranty, as long as there is no internal user caused damage they will cover it. I just don't know what the coverage is for second hand.

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • Satellite A300 - microphone is not working

    Hello!!
    i install windows 7 - 64bit to my Satellite A300 and the microphone doesn't work, but the webcam works.
    I downloaded and install the webcam drivers from the toshiba's site but the mic still doesn't work.
    Do you have any ideas??
    Thanks!

    Hi
    You should go to control panel -> sound > recording tab
    Here you should check if the internal mic is chosen as default device.
    If its not visible click right and ensure that options like: show hidden and disabled devices are marked.
    Furthermore I recommend you to record an short video using the Toshiba webcam tool.
    Check if the internal mic would work using such software

  • The display doesn't work when phone is locked

    My z3 is abt 6 months old
    Recently I locked my phone and tried unlocking it but the screen never turned on though I can see the screen lighting up a bluish colour but the display doesn't appear.
    I have to swith off the phone for around half an hour and restart for it to work.
    Any idea why

    Try repairing your phone with Sony PC Companion
    Sony PC Companion.
    http://support.sonymobile.com/us/tools/pc-companion/

  • My iMac Display doesn't work!

    I hear the sound when he starts but the display stays dark! why?
    Please Help me!!!

    First, detach any peripheral devices except keyboard/mouse. Then reset the SMC:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    If that doesn't change anything, follow the steps in this Apple note: http://support.apple.com/kb/TS2570 . When you get to the section on using Disk Utility to repair the disk, use Lion recovery mode by booting with command and R held down. Assuming of course by then you can view something on the screen. If the screen still doesn't work, take it in for service.

  • IMac 17" Intel CD: display doesn't work

    ciao,
    today when I switched my iMac on the display remained dim, just like if it was off, while everything else worked OK.
    so the display was black like it was off, but then I noticed that if I looked very carefully I could see the login box and I managed to log-in.
    to cut the story short: the iMac is working OK but the screen is so dim it looks like it is off.
    what can I do? Apple support chat told me to try to reboot the iMac pressing Command-Option-P-R, and that this doesn't work it is an HW problem: any other suggestion/reccomendation?
    thank you very much
    andrea
    ca.pattacini[at]gmail.com
    iMac 17" Intel Mac OS X (10.4.6) Display not working...
    iMac 17" Intel   Mac OS X (10.4.6)   Display not working...

    Try the F14 & F15 buttons. Those control the brightness of the screen. That should be able to solve that problem. I had that thing before until I messed with the keyboard and "discovered" it.

  • My macbook pro suddenly turn off and now when I turn it on the display doesn't work but it is on!

    Hello everyone,
    My macbook pro 15" suddenly turned off. Now i tried several time to switch it on and seems it is working but the display doesn't function or there are many wired pictures coming up sometimes.
    can anyone please help me with this issue?
    Thanks

    Welcome to the Apple Support Communities
    Your Mac can't find any bootable partition.
    1. Insert the Mac OS X DVD that came with the Mac and press C key while your Mac is starting.
    2. Select Utilities > Disk Utility, choose Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
    Also, open  > Startup Disk, select Macintosh HD and restart. Maybe your Mac has forgotten the startup partition

  • Why Detect Displays doesn't work anymore?

    I use my PB to watch movies using my TV and the S-Video to RCA cable, but since the last upgrade 10.4.6 the Detect Displays option (in display menu bar AND preference pane) doesn't work.
    The TV shows a dimmed image of what's suppose to show and sometimes it appears vertically distorted.
    I disconnected the S-Video cable and restarted the PB but it still shows that "something" is connected to the s-video port.
    Which files should I delete to "reset" video preferences?
    UPDATE: PRAM reset didn't work...
    Thanks in advance

    Well, the cable can't be the problem, because the computer is "stuck" with a two monitor configuration, even without the cable plugged in, that's why im guessing there's some kind of switch (i hope) that i can reset so the mother board stops thinking i have another display plugged.... the second problem is that if i plug the s-video to rca cable (that came with the laptop) i can't get a clear tv signal from it... it's distorted.... i'll probably open up the computer and check the s-video port... wish me luck.

  • Satellite M70: Battery doesn't work anymore

    The battery of my brand new satellite M70 doesn't work anymore. I didn't use the portable for about a week and when I tried to start it (from battery), it didn't do anything. The battery was still loaded (63%) I have to connect the AC adapter to the power supply to make it work.
    Meanwhile the battery LED is always orange. The battery doesn't load, battery power remains 63%. I tried to remove the battery for a while and put it back in, but this didn't change anything...
    How can I solve this problem?

    Hi
    Possibly the battery has a malfunction. It would be very interesting to know if this issue happens after battery replacing.
    According to your posting the warranty should be valid the battery replacement should be done for free.
    I recommend contacting the Toshiba service partner in your country and ask the guys for the help.

  • Satellite A300 - keyboard does not work sometimes

    Hi,
    the boot my Toshiba Satellite A300 Notebook the keyboard does not work sometimes?
    After a reboot everything is ok!
    Does anyone know why the keyboard does not work sometimes?
    greetings

    Hello
    Do you notice the same behavior with external keyboard? So you can check if the problem is related to internal keyboard/mainboard or something else.
    But its not easy to say something about these sometimes issues But if the keyboard would be really defective I dont see a big problem. Exchange is not so complicated and keyboards are not expensive. ;)

Maybe you are looking for