Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Hello,
I am sorry for bad English.
Satellite A300.
Conducted updating to Win7 on the program Toshiba Upgrade.
Does this program work;
TRDC Reminder and Toshiba Recovery Disc Creator after updating to Wins7?
The program TRDCReminder did not find "Renewal of computer".
On the program Toshiba Recovery Disc Creator was created and that incomprehensible?
If is not it these programm how to recover computer in the case of failure?
Does Tempro work in Win7?
Many thanks.
With kind regards.
Igor.

Good evening.As*** - Enormous thank you for an answer.Before updating to W - s7, I created disks reanimator with Vista.Is there a question in that, how to create the disks of reanimator on W - s7? in default of the corresponding programs?I understood that in the case of accident:1.Restore to Vista 2.Repeatedly to set W - S7 ?Really are not there other paths?On Vista the system was reinstalled from a hard disk.There was possibility to create the disk of renewal.W - S 7 AS ? Tempro after a refixturing ?????:To run out term of guarantee, did 6 months pass ? Enormous Thank you for patience. With kind regards. Igor

Similar Messages

Cannot start Toshiba Recovery Disc Creator on my Satellite A300-15K

Hi! I'm from Poland so my English is a little poor.. (but I hope that is sufficient)
My problem:
I haven't Recovery disc (DVD) because I don't use earlier Toshiba Recobery Disc Creator (when all in my laptop was good).
Now I haven't do this disc because when I start Toshiba Recovery disc Creator I have a error:
" Program Launch RDC and create INI files for RDC Recovery partition _przesta? dzia?a? (ceased to operate)_
error details:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: TRORDCLauncher.exe
Wersja aplikacji: 1.0.0.1
Sygnatura czasowa aplikacji: 4682674e
Nazwa modu?u z b??dem: WIMGAPI.DLL
Wersja modu?u z b??dem: 6.0.6001.18000
Sygnatura czasowa modu?u z b??dem: 4791a7a6
Kod wyj?tku: c0000135
Przesuni?cie wyj?tku: 00009cac
Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
Identyfikator ustawie? regionalnych: 1045
Dodatkowe informacje 1: 9d13
Dodatkowe informacje 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Dodatkowe informacje 3: 9d13
Dodatkowe informacje 4: 1abee00edb3fc1158f9ad6f44f0f6be8
Przeczytaj nasze zasady zachowania poufno?ci informacji:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0415

Hi
Did you change anything on your notebook?
I mean if your HDD recovery partition has been changed or the data o thin partition has been deleted?
To be honest for me it looks like the OS issue. I think its not a single tool issue but I think the operating system has been muddled up
Maybe you should try to recover the notebook using the Toshiba HDD recovery option and after the new OS installation on the notebook you could try to create the recovery disk again.
In order to start the recovery you have to press the F8 immediately after the notebook has been powered up. Then you should choose the first option called Repair My Computer.
This would lead to a new window and there you could choose Toshiba HDD recovery.
But note; this recovery would format the whole HDD so maybe you should backup some data before you would start this procedure.

Satellite A300-211 - Can't start recovery disk creator

I just installed the ultraiso program, when I open the toshiba recovery disc creator this message appear
An unexpected error occurred.
please quit this application and restart it.
(error code:0D00F6-26-00000015)
with an only ok option when I press it, it appears again ,when I press ok for the second time, it disappears and the program runs. What can I do to stop that?
note: I had the same problem with the poweriso program
my lap is a A300-211

Hi mate,
Can you please tell us what happens if you uninstall ultraiso program? To be honest ths program isnt known to me, I never heard about this.
Then try it again please.
In worst case you have to start the HDD recovery option to reinstall Windows. Then you should be able to create the recovery media. For HDD recovery procedure I have founded this:
http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not run correctly

Hi,
I am trying to create a recovery disc for my Toshiba Satellite L500D PSLK0A-00U009.
When I run the Recovery Disc Creator it begins to open then it comes up with a box with an exclamation mark then it says 'Can not open target partition'. Then the Recovery Disc Creator will open. It then appears normal then when I insert a CD to being the process it looks as though it is going to work then it says Error and stops and ejects the CD the Error is code is: 0E01B5-26-510444D9
I have already uninstalled then program then reinstalled it using a download from the MyToshiba website and this did not fix the problem.
Any suggestions?

Hi
Did you try different disks from different manufactures?
How about the usage of USB flash memory stick? As far as I know you can create an bootable USB Recovery flash stick too.

NB200-10Z: Can't make recovery disk using TOSHIBA Recovery Disc Creator

Hi Folks,
I finally got round to buying a USB DVD drive in order to create recovery discs for my NB200-10Z. I got the following:
* Samsung SE-S084C, External USB 2.0 Slimline 8X DVD Writer, Black
I have twice tried to create a recovery disc and am now left with two trashed DVDs. The error codes in the error window are:
Error Code: 0E01B5-26-2A040803
Error code: 02016F-3C-00000000
The first time the burning was stopped, the second time the verify failed.
Can anyone shed light on this?

*Short version:*
Thank you to everybody who replied.
I decided to try out the USB DVD drive on another laptop to perform a HDD backup operation...and it failed as well. Grrrr. Same DVD media (I just hadn't got round to getting new media to try).
I think I shall discount the possiblility of the NB200 being at fault, and therefore shall consider this question answered on this forum.
*Long version:*
Well, I ended up using Virtual CD to "burn" an ISO file to HDD, and then copied that to another laptop to burn to DVD (not using the USB DVD drive, but the same DVD media type). Being the curious type I decided to perform a restore using the USB DVD drive. It got part way through installation then informs me that a CRC check had failed...argggg.
So, to cut a long story even shorter, I ended up slipstreaming the Intel storage drivers into a Win XP ISO (created from a Win XP CD I had from another previous laptop) and creating a bootable USB drive. Now I have a clean install with all the NB200 driver installed. Phew.
Actually, to think a bit more about it, I could have attempted to put the Toshiba recovery ISO onto the bootable USB drive, but I've done the clean install now anyway.
For whatever reason, I had such trouble getting the NB200 BIOS to recognise the USB DVD drive in order to change the boot order (it wasn't in the option list). This was with the DVD in the tray, and without the DVD in the tray. Some investigation required on my part, I think, to determine exactly what is going on.

Recovery Disc Not Working After Hard Drive Replacement

Machine Info:
HP Pavilion DV7-1245dx
Part #NB231UA#ABA
OS - Windows Vista - 64 bits
AMD Processor
Replaced crashed hard drive with 1TB WD internal blue notebook HD. System diagnostics says drive tests ok. I have both recovery discs (part 1 & 2). Recovery disc just runs in DVD/CD drive. I get to "System Recovery Options" screen, but none of restore or recovery manager options execute. I can see directories and files on recovery disc. But no autorun of recovery process and can't execute any of the files. Any assistance appreciated.

First thought- maybe your laptop doesn't support 1TB hdd.Second thought- this is probably an 'Advanced Format' hdd, tripping up Recovery Manager. (Is the hdd recognized in BIOS?)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
I was not able to move my mouse arrow at all.
I had to purchase a wireless mouse so I could use my laptop.
When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
I have a satellite l305d-s5881
thanks for your help

Hi mate
The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
You will need to visit the Toshiba US driver page in order to get all drivers.
To get the touchpad working, you will need to install the Touchpad driver.
Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
You need to install both; firstly VAP and then Flash Cards.
Here is the Toshiba US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Greets

Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Hi,
I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
Thanks for your help.

It is big problem now if the Toshiba tool cannot find the files.
How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
Check it out please.
What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

Toshiba NB200-10z - recovery disc creator.lnk isn't available

Hello, I have a problem with my netbook Toshiba NB200-10z, when I run Toshiba recovery disc creator I get the window with:
The unit or network connection to which the link refers "recovery disc creator.lnk isn't available.
Make sure that the disk is properly inserted or the network resource is available and try again
How can I fix it?

Since this is an English language forum you should post the message in English language.
I assume you are not able to start the Recovery disk creator software
Why?? Who knows.
Try to recover the notebook using HDD recovery option:
Press F8, choose Repair my Computer, and HDD recovery.
If this would not be available or possiblewell you will need to try to order a recovery disk from Toshiba or would try to install the system using another disk

Satellite C50-A-19T problem with TOSHIBA Recovery Media Creator

When i try to make Recovery dvd with TOSHIBA Recovery Media Creator the burning fails.
I have Satellite C50-A-19T with TSSTcorpCDDVDW_SU-208DB_T cd/dvd-rw unit.
During burning process i get an error that say that is impossible read the file D:\ZZImages\ZZImages\install29.swm (the .swm file in error change with different attempts).
I marked the option to verify dvd after burning.
I tried a few times: i try make a single dvd (requires 3 dvd for complete recovery).
i try 2 times with verbatim dvd+r the fist try failed, the second succeeded with the same kind of support.
i try make dvd numb. 2. for two time with dvd-r and dvd +r support and it failed again.
On windows error report i find this error:
and this alert:
+ODD Firmware Update to fix problems with the Toshiba Recovery CD creator+
I see this solution by upgrading firmware for different models of cd/dvd-rw units
http://aps2.toshiba-tro.de/kb0/TSB9C02RP0000R01.htm
but not about the model I have.
i have:
TOSHIBA Recovery Media Creator version: 3.1.02.55065006
windows 8.1 x64.
there is a solution?
is a known problem?
thanks
Elena

> I don't have a free usb drive to test the usb mode.
I would recommend you to purchase an separate USB memory stick and to create the such recovery USB flash memory media.
Please check also this different procedure described in this Toshiba HowTO
[How to create a USB recovery media flash drive from recovery ISO images- or discs (DVDs)|http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm]
Feedback is greatly appreaciated

Satellite A300D-126 Recovery Disc Creator

Hello,
can anyone tell me from where i can download the recovery disc creator for my toshiba. I have format the laptop and i am running windows xp sp2.
Thank you

I think you have erased the recovery image by formating the laptop. Right?!
But you can order a backup media here

DVD recovery disc creator error

Hiya,
I have a toshiba L300 series laptop running vista, which basically just crashes as soon as I load it up as soon as I try to do anything in normal mode (it runs perfectly in safe mode). I'd like to reboot my system obviously!
Basically when I try to run the recovery disc creator, just over half way through creating the first disc I get the error message:
'Failed to read the following file.
F:\06491XSP.swm
(error code:020150-20-00000000)'
Any help would be much appreciated,
thanks,
Olie

Hi!
Firmware updates you can get on the Toshiba website but for your Satellite A300 with Mat****a drive I didnt find one.
Have you tried DVDs from different manufactures? I use always Verbatim disks and never had problems with it.
Check this!
Bye

Toshiba Recovery Media Creator Error Code 020150-20-00000000 (Satallite L755-S5308)

We just received 2 - Toshiba Satallite L755-S5308 Laptops over the thanksgiving holiday from Best Buy and the first thing we normally do after powering up the laptops is to create our recovery disc sets to DVD's. However, both laptops are giving the same error message on both machines at the same point in the creation of the Recovery DVD Disc 4 when using the Toshiba Recovery Media Creator. Please See Eror Message Below:
Failed To Read The Following File.
D:\ZZImages\ZZImages\Preinst18.swm
(Error Code: 020150-20-00000000)
If you are getting this error message then you will not be able to restore your laptop factory software and operating system (Windows 7 Home Premium 64-bit)

You could create an image of the entire HDD onto another drive, but this can be a headache for a lot of users and would require specialized hardware and a HDD enclosure. As such, it's not a feasible solution.
Oh,come now. You can buy 'specialized hardware' -- an HDD enclosure -- from a widely known online computer store for $12.99 with free shipping, and a spare plain old Seagate 500 GB hard drive (nothing very special about it, except that it costs more since the flooding in Thailand) running at 7200 rpm from a different widely known online computer store for $99.99 (shipping extra). Seagate gives away its branded version of Acronis True image for free. It is not that hard to use. I believe the L755 has a 500 GB 5400 rpm hard disc drive, so this Seagate may make the laptop run faster under some conditions. Creating an image of the laptop HDD onto this 2nd HDD mounted in the enclosure may take hours, but consider the only other alternative, below:
Anyone who thinks that solution is not feasible can just wait until their one and only hard disc drive fails or develops a software problem. Without usable recovery discs, the machine must be dropped off or mailed to a service center. Compare the waiting and the expense to have someone else solve that kind of problem with the effort and expense of preventing it. If you don't mind being without your computer for a few days or weeks, go for the simple way.
By the way, even the best home-burned optical discs are prone to develop unexpected failures after they are created. I've never had a factory pressed optical disc properly stored develop a late failure. If these work out of the box, they work a couple of years later. The technologies behind a home-burned disc and a factory-pressed disc are different.
Getting back to my original point, should your 1st HDD fail, and should you have a 2nd HDD with the cloned image of the 1st HDD, your recovery takes as long as it takes to remove HDD #1, installed HDD #2, and reboot your laptop, involving about 5 minutes of your time and perhaps a small screwdriver. You can test whether or not your cloned backup works the same way, by installing HDD #2 and seeing if it works. If you only have a single HDD, there is no good way to test your recovery media, since they overwrite your original HDD.

Re: Recovery disc creator cannot be launched

Hi,
I'm having problem with my recovery disc creator, an error occured "No HDD recovery area!\nThe recovery disc can not be launched." when i'm trying to create a back-up disc.
Need help. What do i need to do?
Many thanks.
kenji
Solved!
Go to Solution.

if you have formatted the disc then you have completely removed the hdd partitions. im sure you have figured this out but im going to say it anyway. this is the exact reason your toshiba user's guide tells you to make recovery media first before anything else is done on the laptop. with that out of the way you can order recovery media from toshiba for $25 by calling 1(800)457-7777 or ordering online here csd.toshiba.com/cgi-bin/tais/support/jsp/serviceUnitVerification.jsp?orderType=SFF
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Satellite A300: Does TRDC Reminder & Toshiba Recovery Disc Creator work after Win 7 upgrade?

Similar Messages

Maybe you are looking for