Satellite A300 doesn't boot - black screen afer Toshiba splash screen

My laptop (Satellite A300) has recently a big problem after when i turn it on.
When I turn on my laptop, after big logo of Toshiba in red i should go to Windows but it just stop and i only see a black page and nothing happens after that, even if i wait for ages, that black page stays same.
I don't know what to do?

I tried this method before. it doesn't work. The problem is not with windows. Once i notice this issue, i installed the Windows vista again and i still face with this black page... but let me tell you something strange... this can fix temporarily when i press F2 button when i see the Red Toshiab logo and then i go to exit to save and chagen and then i restart, and windows runs....it's quite strange because i change nothing and i just save and exit.!!!!!!!! I REALLY NEED HELP WITH THIS BECAUSE I AM SORT OF SUSPICIOUS THAT SOME HARDWARE IN MY LAPTOP HAS SOME PROBLEM..... I DON'T WANT THIS TO GET WORSE :(

Similar Messages

  • Satellite A300 - After BIOS update black screen

    Hello all,
    I just applied the BIOS update on my Satellite A300. After the update successful, the system does a reboot. Now when I try to power it up I get no display, I can hear the hear running, the CD Drive reading the DVD, led blinking.
    The Toshiba ASP tolled me (phone call) the mainboard should be replaced after a unsuccessful bios update, but it's very expensive for me, :(
    Please can you tell me if they are any way to fix it without mainboard replacement? The bios is a Insyde and according to the website the bios has bios [Recovery Technology|http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP doesn't know that.
    Please can you tell me how to start the recovery procedure if it's possible (key combination?),
    Any help about fixing the laptop without mainboard replacement will be much appreciated.

    There are cases when the chip that containes the bios is removed from the motherboard and with a memory writing device (special to do this) it is posible to rewrite the bios(in my country, Romania it is not possible at the Toshiba Service, they change the motherboard wich cost 400-500 euro, but there are guys in electronics who do things like this...).
    This is the happy case to rewrite, when this is possible. But there are exceptions when you can't do anything and you have to change the motherboard.(bad bios update coud burn your entire motherboard or several components /parts).
    In what I've read " For example, on other manufactures PC compatible systems with Award BIOS and AMI BIOS there is dedicated small area, often about 8 kiB or so, called bootblock which starts first" , if your bios si from award or ami they have lets say a small progam which starts first, checks if bios is oki then is booting normal , if not it tries to recover it and boot.
    In your case this is not possible even if you have the specific computer with that kind of bios because the screen doesn't start.
    *Your case is simillar to mine* so you could hope that your video card is broken and not your motherboard.
    My advice to you is to go to the service and diagnostic the problem and see what is the solution.

  • Re: Satellite A300 doesn't boot

    Hi!
    I have a Toshiba A300 for a few years. I have upgraded it with a new RAM module last week. I tested it with memtetst 86, and everything was fine, but this week it started to act strangely.
    The notebook doesn't boot up properly, just spinning the ODD drive (the orange led is flashing), however the ODD is the last boot device in the bios.
    Has this problem a connection with the new ram, or is it just the ODDs fault?

    This means, that the machine doesn't boot. I have just black screen, no toshiba logo. I found a thread [here|http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=63497&tstart=15] and my problem seems similar to it.
    I'm going to try to remove the ram next time the problem occurs.

  • Satellite M60-128: at boot: black screen/delay/lockup

    Hello Guys,
    I've got a strange problem with a Satellite M60-128.
    When I start the notebook there are some problems:
    * sometimes the screen remains black (no Toshiba logo) and the notebook doens't start
    * sometimes the notebook starts normally (when it hanged before and I switched it off with the power button)
    * sometimes the Toshiba-logo is visible but stops there
    I also have sometimes a problem that the USB-ports doesn't work. When I reboot, It works fine. When the USB-ports fail, there is a warning in computer devices.
    I've done a BIOS-update (v1.60) but the problem remains.
    I noticed this: when the notebook doens't start and I "click" on the toutchpad's right button the Toshiba logo is visible and the notebook starts.
    Anyone familiar with this problem or does some knows a solution? Thanks in advantage.
    Andy

    > I noticed this: when the notebook doesnt start and I "click" on the touchpads right button the Toshiba logo is visible and the notebook starts
    Very strange issue usually the notebook should starts automatically without pressing the touchpad button. For me this makes no sense and it looks a little bit like a motherboard issue
    What do you think about this?
    Did you try to reinstall the OS with the delivered Toshiba recovery CD?
    Maybe you should do it to ensure that this is not a software issue
    Best regards

  • Satellite A300 - "Enter password" on startup screen

    Hello, I have a problem with my Satellite A300-14S PSAJ0E-00W00PSK.
    *Screen with input "Enter password" appears every time when I turn it on.* When I put wrong password 3 times, my laptop turns off. I had installed windows 7 with ubuntu for 2 years with no problems but I cannot boot any operating system now (even when I boot with inserted CD/DVD with windows/ubuntu).
    *When can I get correct password? Or it is another solution of this problem?*
    Thank You for any advice!

    I presume your notebook is locked with BIOS password.
    BIOS password cannot be set from alone but I dont understand your situation.
    Either you have blocked your notebook with BIOS password or someone have done it without your knowledge.
    Have you some explanation for this situation.
    Anyway, if BIOS password is not known to you, you must contact nearest Toshiba service and ask for help. They can remove it for you.

  • Satellite L350-ST370​2 Getting Black Screen On Boot

    hey everyone,
    i have a Satellite L350-ST3702, Vista home premium Sp1, (had it for about 4months) and it wont boot anymore,
    so yesterday i got an black screen error on my laptop it said to restart it,
    so i did, then my laptop just wouldn't stat up any more, i have no idea why?
    so i put in the recovery disks that came with my laptop to just reinstall every thing like if i just got it out of the box,
    and as i follow the instructions that the Toshiba recovery wizard disk says, and
    as its "coping files" i get a blue screen error saying "a problem has been detected and windows has been shut down to prevent damages to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL"
    and say to restart or what ever and just keeps doing that.
    Tech Info: "STOP: 0x000000D1"( 0xCCE491E0, 0x00000002, 0x00000000, 0x8CE42FD7)
    Then i restart my system and a black screen come up saying "BOOTMGR missing"
    so now i have nothing that works, i have retried the disks but same error with blue screen. and some times
    it says out in second dick then i get another error "STOP: 0x000000DE"
    i have also tried doing the safe mood and docent come up, nothing works.
    im in need of help!
    =/

    Hernandez91 wrote:
    hey everyone,
    i have a Satellite L350-ST3702, Vista home premium Sp1, (had it for about 4months) and it wont boot anymore,
    so yesterday i got an black screen error on my laptop it said to restart it,
    so i did, then my laptop just wouldn't stat up any more, i have no idea why?
    so i put in the recovery disks that came with my laptop to just reinstall every thing like if i just got it out of the box,
    and as i follow the instructions that the Toshiba recovery wizard disk says, and
    as its "coping files" i get a blue screen error saying "a problem has been detected and windows has been shut down to prevent damages to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL"
    and say to restart or what ever and just keeps doing that.
    Tech Info: "STOP: 0x000000D1"( 0xCCE491E0, 0x00000002, 0x00000000, 0x8CE42FD7)
    Then i restart my system and a black screen come up saying "BOOTMGR missing"
    so now i have nothing that works, i have retried the disks but same error with blue screen. and some times
    it says out in second dick then i get another error "STOP: 0x000000DE"
    i have also tried doing the safe mood and docent come up, nothing works.
    im in need of help!
    =/
    If you cannot perform a recovery, then there likely is a hardware problem.  That's something that the warranty was meant to handle.  I'd suggest initiating a warranty repair by calling Toshiba Support at 800-457-7777..

  • After pacman -Syu upgrade xfce boots black screen cursor

    Hello,
    I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
    [ 18.673]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 18.673] X Protocol Version 11, Revision 0
    [ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 18.674] Build Date: 14 March 2015 06:45:50PM
    [ 18.674]
    [ 18.674] Current version of pixman: 0.32.6
    [ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
    [ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 19.553] (==) No Layout section. Using the first Screen section.
    [ 19.553] (**) |-->Screen "Default Screen" (0)
    [ 19.553] (**) | |-->Monitor "<default monitor>"
    [ 19.586] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 19.586] (==) Automatically adding devices
    [ 19.586] (==) Automatically enabling devices
    [ 19.586] (==) Automatically adding GPU devices
    [ 20.294] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 20.294] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 20.354] (II) Loader magic: 0x815d80
    [ 20.354] (II) Module ABI versions:
    [ 20.354] X.Org ANSI C Emulation: 0.4
    [ 20.354] X.Org Video Driver: 19.0
    [ 20.354] X.Org XInput driver : 21.0
    [ 20.354] X.Org Server Extension : 9.0
    [ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
    [ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 20.422] (II) "glx" will be loaded by default.
    [ 20.423] (II) LoadModule: "vnc"
    [ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 22.029] compiled for 1.17.1, module version = 1.0.0
    [ 22.029] Module class: X.Org Server Extension
    [ 22.029] ABI class: X.Org Server Extension, version 9.0
    [ 22.029] (II) LoadModule: "glx"
    [ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.054] (II) Module glx: vendor="X.Org Foundation"
    [ 24.208] compiled for 1.17.1, module version = 1.0.0
    [ 24.208] ABI class: X.Org Server Extension, version 9.0
    [ 24.208] (==) AIGLX enabled
    [ 24.208] (==) Matched ati as autoconfigured driver 0
    [ 24.208] (==) Matched ati as autoconfigured driver 1
    [ 24.208] (==) Matched modesetting as autoconfigured driver 2
    [ 24.208] (==) Matched fbdev as autoconfigured driver 3
    [ 24.208] (==) Matched vesa as autoconfigured driver 4
    [ 24.208] (==) Assigned the driver to the xf86ConfigLayout
    [ 24.208] (II) LoadModule: "ati"
    [ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 24.332] (II) Module ati: vendor="X.Org Foundation"
    [ 24.332] compiled for 1.17.0, module version = 7.5.0
    [ 24.332] Module class: X.Org Video Driver
    [ 24.332] ABI class: X.Org Video Driver, version 19.0
    [ 24.332] (II) LoadModule: "radeon"
    [ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 24.765] (II) Module radeon: vendor="X.Org Foundation"
    [ 24.765] compiled for 1.17.0, module version = 7.5.0
    [ 24.765] Module class: X.Org Video Driver
    [ 24.765] ABI class: X.Org Video Driver, version 19.0
    [ 24.765] (II) LoadModule: "modesetting"
    [ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
    [ 24.878] compiled for 1.17.1, module version = 1.17.1
    [ 24.878] Module class: X.Org Video Driver
    [ 24.878] ABI class: X.Org Video Driver, version 19.0
    [ 24.878] (II) LoadModule: "fbdev"
    [ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
    [ 25.005] compiled for 1.17.0, module version = 0.4.4
    [ 25.005] Module class: X.Org Video Driver
    [ 25.005] ABI class: X.Org Video Driver, version 19.0
    [ 25.005] (II) LoadModule: "vesa"
    [ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 25.099] (II) Module vesa: vendor="X.Org Foundation"
    [ 25.099] compiled for 1.17.0, module version = 2.3.2
    [ 25.099] Module class: X.Org Video Driver
    [ 25.099] ABI class: X.Org Video Driver, version 19.0
    [ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 25.111] (II) FBDEV: driver for framebuffer: fbdev
    [ 25.111] (II) VESA: driver for VESA chipsets: vesa
    [ 25.111] (++) using VT number 7
    [ 25.184] (II) [KMS] Kernel modesetting enabled.
    [ 25.184] (WW) Falling back to old probe method for modesetting
    [ 25.184] (WW) Falling back to old probe method for fbdev
    [ 25.184] (II) Loading sub module "fbdevhw"
    [ 25.184] (II) LoadModule: "fbdevhw"
    [ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 25.280] compiled for 1.17.1, module version = 0.0.2
    [ 25.280] ABI class: X.Org Video Driver, version 19.0
    [ 25.280] (WW) Falling back to old probe method for vesa
    [ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 25.280] (==) RADEON(0): Default visual is TrueColor
    [ 25.280] (==) RADEON(0): RGB weight 888
    [ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 25.280] (II) Loading sub module "dri2"
    [ 25.280] (II) LoadModule: "dri2"
    [ 25.280] (II) Module "dri2" already built-in
    [ 25.280] (II) Loading sub module "exa"
    [ 25.280] (II) LoadModule: "exa"
    [ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 25.406] (II) Module exa: vendor="X.Org Foundation"
    [ 25.406] compiled for 1.17.1, module version = 2.6.0
    [ 25.406] ABI class: X.Org Video Driver, version 19.0
    [ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
    [ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
    [ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 25.510] (II) RADEON(0): EDID for output VGA-0
    [ 25.541] (II) RADEON(0): EDID for output HDMI-0
    [ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 25.541] (II) RADEON(0): Year: 2012 Week: 0
    [ 25.541] (II) RADEON(0): EDID Version: 1.3
    [ 25.541] (II) RADEON(0): Digital Display Input
    [ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 25.541] (II) RADEON(0): Gamma: 2.20
    [ 25.541] (II) RADEON(0): DPMS capabilities: Off
    [ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 25.541] (II) RADEON(0): First detailed timing is preferred mode
    [ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 25.541] (II) RADEON(0): Supported established timings:
    [ 25.541] (II) RADEON(0): 720x400@70Hz
    [ 25.541] (II) RADEON(0): 640x480@60Hz
    [ 25.541] (II) RADEON(0): 640x480@67Hz
    [ 25.541] (II) RADEON(0): 640x480@72Hz
    [ 25.541] (II) RADEON(0): 640x480@75Hz
    [ 25.541] (II) RADEON(0): 800x600@56Hz
    [ 25.541] (II) RADEON(0): 800x600@60Hz
    [ 25.541] (II) RADEON(0): 800x600@72Hz
    [ 25.541] (II) RADEON(0): 800x600@75Hz
    [ 25.541] (II) RADEON(0): 832x624@75Hz
    [ 25.542] (II) RADEON(0): 1024x768@60Hz
    [ 25.542] (II) RADEON(0): 1024x768@70Hz
    [ 25.542] (II) RADEON(0): 1024x768@75Hz
    [ 25.542] (II) RADEON(0): 1280x1024@75Hz
    [ 25.542] (II) RADEON(0): 1152x864@75Hz
    [ 25.542] (II) RADEON(0): Manufacturer's mask: 0
    [ 25.542] (II) RADEON(0): Supported standard timings:
    [ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 25.542] (II) RADEON(0): Supported detailed timing:
    [ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 25.542] (II) RADEON(0): EDID (in hex):
    [ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 25.542] (II) RADEON(0): Output VGA-0 disconnected
    [ 25.542] (II) RADEON(0): Output HDMI-0 connected
    [ 25.542] (II) RADEON(0): Using exact sizes for initial modes
    [ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 25.542] (==) RADEON(0): DPI set to (96, 96)
    [ 25.542] (II) Loading sub module "fb"
    [ 25.542] (II) LoadModule: "fb"
    [ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 25.769] (II) Module fb: vendor="X.Org Foundation"
    [ 25.769] compiled for 1.17.1, module version = 1.0.0
    [ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 25.769] (II) Loading sub module "ramdac"
    [ 25.769] (II) LoadModule: "ramdac"
    [ 25.769] (II) Module "ramdac" already built-in
    [ 25.769] (II) UnloadModule: "modesetting"
    [ 25.769] (II) Unloading modesetting
    [ 25.769] (II) UnloadModule: "fbdev"
    [ 25.769] (II) Unloading fbdev
    [ 25.769] (II) UnloadSubModule: "fbdevhw"
    [ 25.769] (II) Unloading fbdevhw
    [ 25.769] (II) UnloadModule: "vesa"
    [ 25.769] (II) Unloading vesa
    [ 25.769] (--) Depth 24 pixmap format is 32 bpp
    [ 25.818] (II) RADEON(0): [DRI2] Setup complete
    [ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 25.818] (II) RADEON(0): Front buffer size: 5652K
    [ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 25.853] (==) RADEON(0): Backing store enabled
    [ 25.853] (II) RADEON(0): Direct rendering enabled
    [ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 25.853] (II) EXA(0): Driver registered support for the following operations:
    [ 25.853] (II) Solid
    [ 25.853] (II) Copy
    [ 25.853] (II) Composite (RENDER acceleration)
    [ 25.853] (II) UploadToScreen
    [ 25.853] (II) DownloadFromScreen
    [ 25.853] (II) RADEON(0): Acceleration enabled
    [ 25.853] (==) RADEON(0): DPMS enabled
    [ 25.853] (==) RADEON(0): Silken mouse enabled
    [ 25.920] (II) RADEON(0): Set up textured video
    [ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
    [ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 26.100] (--) RandR disabled
    [ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
    [ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 32.357] (II) AIGLX: Loaded and initialized r600
    [ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.161] (II) LoadModule: "evdev"
    [ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 35.498] (II) Module evdev: vendor="X.Org Foundation"
    [ 35.498] compiled for 1.16.2, module version = 2.9.1
    [ 35.499] Module class: X.Org XInput Driver
    [ 35.499] ABI class: X.Org XInput driver, version 21.0
    [ 35.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.499] (**) Power Button: always reports core events
    [ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.499] (--) evdev: Power Button: Found keys
    [ 35.499] (II) evdev: Power Button: Configuring as keyboard
    [ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 35.499] (**) Option "xkb_rules" "evdev"
    [ 35.499] (**) Option "xkb_model" "pc104"
    [ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 35.975] (II) Using input driver 'evdev' for 'Power Button'
    [ 35.975] (**) Power Button: always reports core events
    [ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 35.975] (--) evdev: Power Button: Found keys
    [ 35.975] (II) evdev: Power Button: Configuring as keyboard
    [ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 35.975] (**) Option "xkb_rules" "evdev"
    [ 35.975] (**) Option "xkb_model" "pc104"
    [ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 35.979] (II) No input driver specified, ignoring this device.
    [ 35.979] (II) This device may have been added with another device file.
    [ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.980] (**) Generic USB Keyboard: always reports core events
    [ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.980] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 35.980] (**) Option "xkb_rules" "evdev"
    [ 35.980] (**) Option "xkb_model" "pc104"
    [ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.981] (**) Generic USB Keyboard: always reports core events
    [ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 35.981] (--) evdev: Generic USB Keyboard: Found keys
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 35.981] (**) Option "xkb_rules" "evdev"
    [ 35.981] (**) Option "xkb_model" "pc104"
    [ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 35.982] (**) Generic USB Keyboard: always reports core events
    [ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 36.060] (II) UnloadModule: "evdev"
    [ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 36.060] (**) HP Webcam HD-2200: always reports core events
    [ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
    [ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
    [ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 36.061] (**) Option "xkb_rules" "evdev"
    [ 36.061] (**) Option "xkb_model" "pc104"
    [ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 36.062] (II) No input driver specified, ignoring this device.
    [ 36.062] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 36.063] (II) No input driver specified, ignoring this device.
    [ 36.063] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 36.064] (II) No input driver specified, ignoring this device.
    [ 36.064] (II) This device may have been added with another device file.
    [ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
    [ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
    [ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
    [ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
    [ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
    Last edited by mavo (2015-03-17 13:08:53)

    alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
    Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
    ~.local/share/xorg/Xorg.1.log
    [ 84.848]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 84.848] X Protocol Version 11, Revision 0
    [ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
    [ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    [ 84.848] Build Date: 14 March 2015 06:45:50PM
    [ 84.849]
    [ 84.849] Current version of pixman: 0.32.6
    [ 84.849] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
    [ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 84.851] (==) No Layout section. Using the first Screen section.
    [ 84.851] (**) |-->Screen "Default Screen" (0)
    [ 84.851] (**) | |-->Monitor "<default monitor>"
    [ 84.851] (==) No monitor specified for screen "Default Screen".
    Using a default monitor configuration.
    [ 84.851] (==) Automatically adding devices
    [ 84.851] (==) Automatically enabling devices
    [ 84.851] (==) Automatically adding GPU devices
    [ 84.851] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 84.851] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 84.851] (II) Loader magic: 0x815d80
    [ 84.851] (II) Module ABI versions:
    [ 84.851] X.Org ANSI C Emulation: 0.4
    [ 84.851] X.Org Video Driver: 19.0
    [ 84.851] X.Org XInput driver : 21.0
    [ 84.851] X.Org Server Extension : 9.0
    [ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
    [ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 84.859] (II) "glx" will be loaded by default.
    [ 84.859] (II) LoadModule: "vnc"
    [ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
    [ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
    [ 84.868] compiled for 1.17.1, module version = 1.0.0
    [ 84.868] Module class: X.Org Server Extension
    [ 84.868] ABI class: X.Org Server Extension, version 9.0
    [ 84.868] (II) LoadModule: "glx"
    [ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 84.870] (II) Module glx: vendor="X.Org Foundation"
    [ 84.870] compiled for 1.17.1, module version = 1.0.0
    [ 84.870] ABI class: X.Org Server Extension, version 9.0
    [ 84.870] (==) AIGLX enabled
    [ 84.870] (==) Matched ati as autoconfigured driver 0
    [ 84.870] (==) Matched ati as autoconfigured driver 1
    [ 84.870] (==) Matched modesetting as autoconfigured driver 2
    [ 84.870] (==) Matched fbdev as autoconfigured driver 3
    [ 84.870] (==) Matched vesa as autoconfigured driver 4
    [ 84.870] (==) Assigned the driver to the xf86ConfigLayout
    [ 84.870] (II) LoadModule: "ati"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 84.871] (II) Module ati: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "radeon"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 84.871] (II) Module radeon: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 7.5.0
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "modesetting"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.1, module version = 1.17.1
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "fbdev"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 0.4.4
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) LoadModule: "vesa"
    [ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 84.871] (II) Module vesa: vendor="X.Org Foundation"
    [ 84.871] compiled for 1.17.0, module version = 2.3.2
    [ 84.871] Module class: X.Org Video Driver
    [ 84.871] ABI class: X.Org Video Driver, version 19.0
    [ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
    HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
    BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
    BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
    KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
    MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
    KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
    HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
    [ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 84.876] (II) FBDEV: driver for framebuffer: fbdev
    [ 84.876] (II) VESA: driver for VESA chipsets: vesa
    [ 84.876] (++) using VT number 3
    [ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
    [ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
    [ 84.876] (II) [KMS] Kernel modesetting enabled.
    [ 84.876] (WW) Falling back to old probe method for modesetting
    [ 84.876] (WW) Falling back to old probe method for fbdev
    [ 84.876] (II) Loading sub module "fbdevhw"
    [ 84.876] (II) LoadModule: "fbdevhw"
    [ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 84.876] compiled for 1.17.1, module version = 0.0.2
    [ 84.876] ABI class: X.Org Video Driver, version 19.0
    [ 84.876] (WW) Falling back to old probe method for vesa
    [ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    [ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    [ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 84.876] (==) RADEON(0): Default visual is TrueColor
    [ 84.876] (==) RADEON(0): RGB weight 888
    [ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
    [ 84.876] (II) Loading sub module "dri2"
    [ 84.876] (II) LoadModule: "dri2"
    [ 84.876] (II) Module "dri2" already built-in
    [ 84.876] (II) Loading sub module "exa"
    [ 84.876] (II) LoadModule: "exa"
    [ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 84.877] (II) Module exa: vendor="X.Org Foundation"
    [ 84.877] compiled for 1.17.1, module version = 2.6.0
    [ 84.877] ABI class: X.Org Video Driver, version 19.0
    [ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
    [ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
    [ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
    [ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
    [ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
    [ 84.990] (II) RADEON(0): EDID for output VGA-0
    [ 85.021] (II) RADEON(0): EDID for output HDMI-0
    [ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
    [ 85.021] (II) RADEON(0): Year: 2012 Week: 0
    [ 85.021] (II) RADEON(0): EDID Version: 1.3
    [ 85.021] (II) RADEON(0): Digital Display Input
    [ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
    [ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
    [ 85.021] (II) RADEON(0): Gamma: 2.20
    [ 85.021] (II) RADEON(0): DPMS capabilities: Off
    [ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 85.021] (II) RADEON(0): First detailed timing is preferred mode
    [ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
    [ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
    [ 85.021] (II) RADEON(0): Supported established timings:
    [ 85.021] (II) RADEON(0): 720x400@70Hz
    [ 85.021] (II) RADEON(0): 640x480@60Hz
    [ 85.021] (II) RADEON(0): 640x480@67Hz
    [ 85.021] (II) RADEON(0): 640x480@72Hz
    [ 85.021] (II) RADEON(0): 640x480@75Hz
    [ 85.021] (II) RADEON(0): 800x600@56Hz
    [ 85.021] (II) RADEON(0): 800x600@60Hz
    [ 85.021] (II) RADEON(0): 800x600@72Hz
    [ 85.021] (II) RADEON(0): 800x600@75Hz
    [ 85.021] (II) RADEON(0): 832x624@75Hz
    [ 85.021] (II) RADEON(0): 1024x768@60Hz
    [ 85.021] (II) RADEON(0): 1024x768@70Hz
    [ 85.021] (II) RADEON(0): 1024x768@75Hz
    [ 85.021] (II) RADEON(0): 1280x1024@75Hz
    [ 85.021] (II) RADEON(0): 1152x864@75Hz
    [ 85.021] (II) RADEON(0): Manufacturer's mask: 0
    [ 85.021] (II) RADEON(0): Supported standard timings:
    [ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
    [ 85.021] (II) RADEON(0): Supported detailed timing:
    [ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
    [ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
    [ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
    [ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
    [ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
    [ 85.021] (II) RADEON(0): EDID (in hex):
    [ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
    [ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
    [ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
    [ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
    [ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
    [ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
    [ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
    [ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
    [ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
    [ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 85.022] (II) RADEON(0): Output VGA-0 disconnected
    [ 85.022] (II) RADEON(0): Output HDMI-0 connected
    [ 85.022] (II) RADEON(0): Using exact sizes for initial modes
    [ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
    [ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
    [ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 85.022] (==) RADEON(0): DPI set to (96, 96)
    [ 85.022] (II) Loading sub module "fb"
    [ 85.022] (II) LoadModule: "fb"
    [ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 85.022] (II) Module fb: vendor="X.Org Foundation"
    [ 85.022] compiled for 1.17.1, module version = 1.0.0
    [ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 85.022] (II) Loading sub module "ramdac"
    [ 85.022] (II) LoadModule: "ramdac"
    [ 85.022] (II) Module "ramdac" already built-in
    [ 85.022] (II) UnloadModule: "modesetting"
    [ 85.022] (II) Unloading modesetting
    [ 85.022] (II) UnloadModule: "fbdev"
    [ 85.022] (II) Unloading fbdev
    [ 85.022] (II) UnloadSubModule: "fbdevhw"
    [ 85.022] (II) Unloading fbdevhw
    [ 85.022] (II) UnloadModule: "vesa"
    [ 85.022] (II) Unloading vesa
    [ 85.022] (--) Depth 24 pixmap format is 32 bpp
    [ 85.023] (II) RADEON(0): [DRI2] Setup complete
    [ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
    [ 85.023] (II) RADEON(0): Front buffer size: 5652K
    [ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
    [ 85.023] (==) RADEON(0): Backing store enabled
    [ 85.023] (II) RADEON(0): Direct rendering enabled
    [ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 85.023] (II) EXA(0): Driver registered support for the following operations:
    [ 85.023] (II) Solid
    [ 85.023] (II) Copy
    [ 85.023] (II) Composite (RENDER acceleration)
    [ 85.023] (II) UploadToScreen
    [ 85.023] (II) DownloadFromScreen
    [ 85.023] (II) RADEON(0): Acceleration enabled
    [ 85.023] (==) RADEON(0): DPMS enabled
    [ 85.023] (==) RADEON(0): Silken mouse enabled
    [ 85.023] (II) RADEON(0): Set up textured video
    [ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
    [ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
    [ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
    [ 85.023] (--) RandR disabled
    [ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
    [ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 85.048] (II) AIGLX: Loaded and initialized r600
    [ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
    [ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.088] (II) LoadModule: "evdev"
    [ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 85.089] (II) Module evdev: vendor="X.Org Foundation"
    [ 85.089] compiled for 1.16.2, module version = 2.9.1
    [ 85.089] Module class: X.Org XInput Driver
    [ 85.089] ABI class: X.Org XInput driver, version 21.0
    [ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
    [ 85.090] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.090] (**) Power Button: always reports core events
    [ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.090] (--) evdev: Power Button: Found keys
    [ 85.090] (II) evdev: Power Button: Configuring as keyboard
    [ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
    [ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 85.090] (**) Option "xkb_rules" "evdev"
    [ 85.090] (**) Option "xkb_model" "pc104"
    [ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
    [ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
    [ 85.124] (II) Using input driver 'evdev' for 'Power Button'
    [ 85.124] (**) Power Button: always reports core events
    [ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 85.124] (--) evdev: Power Button: Found keys
    [ 85.124] (II) evdev: Power Button: Configuring as keyboard
    [ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
    [ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 85.124] (**) Option "xkb_rules" "evdev"
    [ 85.124] (**) Option "xkb_model" "pc104"
    [ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
    [ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
    [ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
    [ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
    [ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
    [ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
    [ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
    [ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
    [ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
    [ 85.126] (II) No input driver specified, ignoring this device.
    [ 85.126] (II) This device may have been added with another device file.
    [ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
    [ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.126] (**) Generic USB Keyboard: always reports core events
    [ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
    [ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.126] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
    [ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
    [ 85.126] (**) Option "xkb_rules" "evdev"
    [ 85.126] (**) Option "xkb_model" "pc104"
    [ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
    [ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.127] (**) Generic USB Keyboard: always reports core events
    [ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
    [ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
    [ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
    [ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
    [ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
    [ 85.127] (--) evdev: Generic USB Keyboard: Found keys
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
    [ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
    [ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
    [ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
    [ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
    [ 85.127] (**) Option "xkb_rules" "evdev"
    [ 85.127] (**) Option "xkb_model" "pc104"
    [ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
    [ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
    [ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
    [ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
    [ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
    [ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
    [ 85.128] (**) Generic USB Keyboard: always reports core events
    [ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
    [ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
    [ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
    [ 85.220] (II) UnloadModule: "evdev"
    [ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
    [ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
    [ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
    [ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
    [ 85.221] (**) HP Webcam HD-2200: always reports core events
    [ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
    [ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
    [ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
    [ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
    [ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
    [ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
    [ 85.222] (**) Option "xkb_rules" "evdev"
    [ 85.222] (**) Option "xkb_model" "pc104"
    [ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
    [ 85.223] (II) No input driver specified, ignoring this device.
    [ 85.223] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
    [ 85.224] (II) No input driver specified, ignoring this device.
    [ 85.224] (II) This device may have been added with another device file.
    [ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    [ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
    [ 85.225] (II) No input driver specified, ignoring this device.
    [ 85.225] (II) This device may have been added with another device file.
    journalctl -b
    Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
    Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
    Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
    Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
    Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
    Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
    Mar 18 10:05:02 arch-server kernel: 3 disabled
    Mar 18 10:05:02 arch-server kernel: 4 disabled
    Mar 18 10:05:02 arch-server kernel: 5 disabled
    Mar 18 10:05:02 arch-server kernel: 6 disabled
    Mar 18 10:05:02 arch-server kernel: 7 disabled
    Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
    Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
    Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
    Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
    Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
    Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
    Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
    Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
    Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
    Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
    Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
    Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
    Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
    Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
    Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
    Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
    Mar 18 10:05:03 arch-server kernel: Zone ranges:
    Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
    Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
    Mar 18 10:05:03 arch-server kernel: Early memory node ranges
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
    Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
    Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
    Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
    Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
    Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
    Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
    Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
    Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
    Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
    Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
    Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
    Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
    Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
    Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
    Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
    Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
    Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
    Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
    Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
    Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
    Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Mar 18 10:05:03 arch-server kernel: Checking aperture...
    Mar 18 10:05:03 arch-server kernel: No AGP bridge found
    Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
    Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
    Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
    Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
    Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
    Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
    Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
    Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
    Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
    Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
    Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
    Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
    Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
    Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
    Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
    Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
    Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
    Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
    Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
    Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
    Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
    Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
    Mar 18 10:05:03 arch-server kernel: Security Framework initialized
    Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
    Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
    Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
    Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
    Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
    Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
    Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
    Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
    Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
    Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
    Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
    Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
    Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
    Mar 18 10:05:03 arch-server kernel: ... version: 0
    Mar 18 10:05:03 arch-server kernel: ... bit width: 48
    Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
    Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
    Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
    Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
    Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
    Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
    Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
    Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
    Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
    Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
    Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
    Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
    Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
    Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
    Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
    Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
    Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
    Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
    Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
    Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
    Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
    Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
    Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
    Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
    Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
    Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP

  • Will not boot - Black screen A2 code on bottom right.

    mobo:Z97S SLI KRAIT EDITION
    Samsung SSD - Windows and games are installed here
    WD HDD - Everything else is put on this one.
    Windows 7
    I installed an ISO mounting program called Gizmo Central onto my HDD
    After installation it said that it needed to restart. After it restarted I got a black screen with an A2 code. The screen will go completely black, and then it will back to the screen with the A2 code in the bottom right. It won't boot up BIOS, unless I do 1 of 2 things:
    1. power off the pc, unplug the sata cable from the HDD, power pc back on, bios and windows will boot up. I can then turn the pc off, plug the sata cable back into the HDD, and it boots up fine into windows, but if I reboot again, it goes back to that black screen with the A2.
    2. I have put in a disc into the dvd drive, and I do not get that screen. (I've been doing this as a workaround since it's much easier)
    I have tried a number of things to resolve this, but none of them have restored my computer to it's perfect working order that it was previous to installing this program.
    When I tried to uninstall that program it wasn't even on my installed programs list, so I deleted the folder it was in. This didn't resolve the issue.
    I have wiped everything off of my HDD drive. This did not resolve the issue.
    I have triple checked that my SSD is the first in the boot order. I even disabled the HDD from the HD boot order entirely. No change...
    I updated my motherboard drivers. No change.
    It's almost like for whatever reason my BIOS isn't listening to the boot order and doing my DVD drive, HDD, and then the SSD ever since I installed that Gizmo ISO mounting program.
    I set the BIOS to factory default settings. That did not fix this issue.
    I have use a windows system restore point from 2 days ago when it was working flawlessly. No change.
    I'm thinking about reinstalling Windows, but logically it doesn't make sense to do that since the error happens even if I power off/on from BIOS with the HDD plugged in, so it I'm willing to venture that it's not Windows at fault here.
    Also the computer used to boot up in like 8 seconds. It's still fast to boot up, but ever since this started to happen, it takes like 15-30 seconds for my usb mouse, and usb keyboard to register after windows starts up. It use to be immediate. My computer is so messed up right now, and I don't even know how it got like this or how to fix it. I'm pretty savvy and can follow directions well, so any help would be greatly appreciated.

    Quote from: JLio01 on 29-April-15, 06:56:47
    What intel USB driver version do you use? There's one more thing to try, try plug the kb/ms to USB 3.0 ports except the ones under the LAN port, and check if it happens again.
    I'm glad you recommended checking Intel drivers. I typed appwiz.cpl to go to the installed programs list in windows. Found "intel USB 3.0 extensible host controller". I tried uninstalling this. It made my mouse and keyboard not work for about 1 minutes. Windows downloaded some drivers for my devices, and asked to reboot. I rebooted. Mouse/keyboard responded right away! Just incase it was a fluke I rebooted another 2 times, and each time the mouse and keyboard are immediately responsive. I'm SO glad that my PC is back to it's original working order. Thank you to you all for taking time out of your day to help me. I really appreciate it!

  • G5 won't boot - black screen

    my g5 2x1,8ghz (late 2004, pci) running on 10.5.4 recently freezed during work. after forced shutdown with power button, the g5 refused to boot. if i press the power button, i get the chime sound, the fans are spinning up and the power led is on, but i get a black screen. the fans are ramping up and i have to force shutdown again. every 1 of 15 times trying to startup the machine will boot. i have to crt monitors connected via vga to a radeon9600xt agp and a radeon 7000 pci card. both monitors show a black screen. if the system boots, it can boot from internal hd, apple hardware test cd, or leopard installer dvd. after running for 15-20min. the system freezes again and i have to force shutdown. while running, the fans operate in normal speed and temp sensors show no overheating!
    what i have done so far for troobleshooting:
    - reset pmu on logicboard
    - changed pram battery
    - reseated hd, pci and agp cards, ram modules, changed position and amount of ram modules
    - the crt monitors and cables are fine
    - from time to time i can boot in open firmware or target mode
    - apple hardware test shows no error messages
    - if system boots in os x, both processors and ram modules show up correct in system profiler
    - even if i disconnect the internal hd's, i get a black screen ... and sometimes the grey screen with missing startup folder
    any ideas?
    kind regards
    ole

    Hi. My G5 quad started with the same problem yesterday. The keyboard doesn't work either can't reset the pram or boot from the leopard DVD. I tried everything I could think of removed and reseated everything, tried with just the factory ram, tried just the OWC ram, reset the PMU. Called support today. Tried everything he said. No luck. He set up an appointment for me at the store tomorrow. Fortunately I have 10 months left on my AppleCare. I'll let you know what I find out. Mine started with the screen going to diagonalred lines and the sound started looping. My kid was playing Rainbow 6. When he rebboted, got chime but black screen then the fans went into turbo mode.

  • GS70 - Does not boot - black screen with solid white dash

    Sorry for the long post - I've been beating my head against this problem all day, filed a report ticket and really need help from anyone who has ideas.
    Yesterday evening after finally relenting and allowing the patch Tuesday updates to install on my GS70 Stealth I tried to power on my computer and it remained stuck at the MSI logo. I waited 3 hours with no success before powering it off and attempting to access the bios by hitting the delete button. The screen turned black except for one non-blinking white dash near the center of the screen. This screen also remains indefinitely and requires a hardware power off to work. I've tried all of the function key presses and recovery shortcuts to no avail.
    Eventually I tried to boot into linux via a live USB. I still could not access the bios but, to my surprise, so long as this USB is in my system, Windows happily boots. After this I tried to revert to a system restore point before the updates but that did not resolve the problem. I also tried to update the BIOS but there is no way to install BIOS updates that I know of that doesn't require accessing the old BIOS first (which I cannot do because the black screen with a white dash is still all that shows up). I tried forcing the UEFI bios to load through windows recovery settings with no luck either.
    I've sent in an RMA/Support request and hopefully MSI will repair or replace my device but I sent it in for an RMA literally less than two months ago and to be having to do it again so soon is starting to turn me off of the product. For me to insure and ship my device to MSI costs a little over $100 each time which is rapidly turning this $1600 product into an $1800 one and turning me from an MSI brand loyalist to a 'one-star-review everywhere' evangelist. Is it possible that something MSI did during the last RMA screwed up my motherboard (they replaced the disfunctional steel series keyboard with a new marginally more functional steel series keyboard)? Does MSI ever cover the shipping costs for an RMA if the RMA is a result of damage that they caused to the device? Is there anything I should do to try to avoid burning more money trying to get a luxury-priced product I've already paid for to function?

    i had similar problem myself on my first GS70 it has some sort of bios problem that it random hangs itself :/ causes OS not to boot and bios refuses to load but i managed to get my recovery USB to boot but not bios yet so i sent laptop off for repair they replaced the motherboard so i got it back then i had an faulty gpu :/ so i took it back and got money back so i bought new one some where else since than i havent had problem so this sort of problem sounds like bios firmware isnt booting propertly :/ so have you tried removing msata and HDD from laptop and then power laptop on? to see if bios gets forced on if so power it off put msata back on and so then power laptop back on and bios shall work again

  • Imac g4 won't boot; black screen

    Hi,
    I have a question about a friend's imac g4 (1.25 gz). When I press the power button I can hear the startup chime, but the screen stays black. At first I thought it was the display, so I started up in target disk mode; however, the hard drive would only show up in disk utility on the host computer. When I tried to verify and repair the disk I got an error. Here is a screen shot of what it said.
    http://img812.imageshack.us/i/diskerror.png/
    Was this error because disk utility said the hard drive wasn't mounted?
    The imac's CD drive doesn't work, so I tried to use an external CD drive to boot from the install disk, but it didn't come up with the boot options when I held down the option key--just a black screen. If the hard drive was bad, would it cause a black screen?
    Thanks in advance,
    Peter

    Keep in mind that you have to repair a drive with a Disk Utility version that is the same OS as the one you are trying to repair. Example, 10.5's Disk Repair on a 10.5 system. Otherwise you will get erroneous errors. If you did that, read on.
    pythonkid94 wrote:
    Was this error because disk utility said the hard drive wasn't mounted?
    No, it said Disk Utility's Disk Repair couldn't fix it. It may be so damaged that it will not mount.
    If Disk Utility can't fix it, you'll need a more robust utility to repair it.
    I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy.
    It also has File System repair now and hard drive S.M.A.R.T. diagnostics.
    Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way. But sometimes a badly damaged system can be deemed unrepairable by the installed version, but if booted and repaired from the DW disk it may be repairable. This has happened to me.
    I use DW once a month to try and catch errors in my system from getting too far out of hand. It has repaired every little and big issue I have ever had with my three Macs.
    If your friend has a good backup, hopefully a clone of your system before you had issues, an Erase and Install may also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
    Good Luck! DALE

  • Satellite A300-1MV slow boot up and slow running

    I have recently bought an Satellite A300-1MV it runs vista,
    I have the trial Mcafee running and the other pre-installed software that came on the laptop. My problem is that on boot up the computer seems to take a ridiculous amount of time to boot up, once past the vista orb it says please wait which lasts about a minute untill the password request appears.
    I had a look in the problemreports in control panel and found that the toshiba tempro program was hanging on boot up so disabled it but didn't seem to have any effect, I also find that when for example you double click on a photo thumbnail to view it, it takes about 30 seconds to appear on the full screen allthough the window is shown on the start menu bar at the bottom allmost straight away.
    I have defragged the hard drive, scandisk, memory checked, virus checked etc.. I compared it to a friends laptop dell that has less memory but same spec processor and vista and that appears to work 10 times faster.. any ideas?, I do wonder if its a toshiba program causing the problem.
    I do though have a problem with acrobat reader opening of its own accord and telling me it can't read the file ( don't know what file)
    I have uninstalled this and reinstalled but still have the same issue!...HELP!!!
    Cheers

    Hello
    Very nice thread about slow start up you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
    To be honest I don't like McAfee and I have installed other antivirus application that needs much more resources. Please read this interesting thread and let me know what do you think about it.

  • Laptop won't boot; Black screen w/moveable cursor

    Satellite A305-S6905
    Current Situation:  Laptop won’t boot-up; black screen with moveable mouse cursor, HHD indicator actively flashing.
    I was attempting to upgrade from Vista to Win7-32bit-Ultimate.  Kept receiving error messages regarding non-compatible files.  Next the computer would not recognize the Multi-Drive (did not appear on the My Computer screen.  Now all I get is the black screen.  How can I restore?

    BTW, to reboot this PC (Windows 7), all you need to do is pres ctr+alt+delete at the black screen, and it will do just that. But if you disconnected all usb drives, then you cannot use this shortcut. You need to just shut it down with the power button.

  • Imac will not boot. black screen, no sounds.. but has power.

    Hi guys, yesterday my mac would not boot. The screen is black, and the power light on the bottom right hand corner is on. My warranty expired 30 days ago (figures). I stupidly put in a CD to see if the player had power and it did (now I can't get it out). I can hear the fan on, and the DVD drive spinning. I have no chimes or sounds. I removed the memory and started the machine... same thing except the power light started flashing. I put the memory back in and powered it up.. same as before solid light, black screen, and no sounds. I unplugged the unit for a day which did not help. ANY help would be appreciated!
    Imac - Intel   Mac OS X (10.4.9)  

    First, boot and hold down mouse key to get CD out. then,
    Try this.
    Turn on Mac and hold down command-S (Apple S), it will boot into single user mode (white on black). Let it finish.
    When it is done type the following.
    fsck -fy
    then hit return. It will check the disk and make repairs. It can take several minutes. If it finds errors it will fix and say OK. If so, type fsck -fy and run it again. This time if it doesn't find any errors type
    reboot
    Hopefully it will boot into OS X.

  • Satellite A300 won't boot from any device

    I've got an A300 that won't seem to boot from any device.
    When I start it I see the splash screen and can enter the BIOS or Boot select.
    I've tried setting boot priority to HDD & CD, and also chosen to boot from both with the Product Recovery CD in the drive.
    However as soon as it gets past the splash screen I am just presented with a plain black screen.
    I hear a bit of CD activity and the light flashes a couple of times but then nothing.
    Normally I would expect a prompt to press a key to boot from CD.
    I have tried pressing the key anyway but this just seems to result in a default beep.
    Could it be the graphics card on the system board?

    Hi
    > Could it be the graphics card on the system board?
    I think this is no matter if the issue would be related to mobo or GPU in both cases the motherboard needs to be replaced. But if you area able to access the BIOS then the mobo could be ok.
    But generally speaking it sounds like serious hardware problem and I think its time for an notebook technician.
    Anyway, did you try to boot from different CDs? I mean Linux Live CD or Windows PartBE?
    Please check this both disks can be downloaded for free

Maybe you are looking for