Satellite A300 intermittently won't start

Hi,
can any of you help with A300 which sometimes (recently even more often) just wont start/boot?
I run my A300 without battery, when I press power button
1) Fun starts
2) "Sattelite" logo on lower left corner blinks
3) HDD diode blinks
4) display wont turn on even for a while
5) touchpad lightning stays off
6) It will continue like that for ever (no activity except fan)
After couple of hard reboots it may occasionally boot and then is working absolutely fine.
Any ideas?
Many thanks!

On this virtual way it is not possible to say for sure what the problem is. Since two weeks I have similar problem on my A300. It wont start at all. Power LED blinks two or three times and it is all what happen.
At the beginning it happened sporadically but now there is no other reaction. I think problem is board power supply electronic.
On your A300 it can be the same.

Similar Messages

  • Satellite A300 - Vista won't load, computer won't start

    Satellite A300
    Model Number: PSAGCA-02W010
    Vista will not load; have tried start up repair; system restore and starting in safe mode, none of these will work. I get the error "Error 0x80070570: The file or directory is corrupted and unreadable."
    I don't know what I have done with my recovery CD; or if I even got any with my purchase (from Harvey Norman).
    Please advise what can be done.

    Hey,
    > I don't know what I have done with my recovery CD; or if I even got any with my purchase (from Harvey Norman).
    Normally you dont get any recovery disk with the notebook because you have to create it yourself using Toshiba recovery disk but this is mentioned in user manual. Probably you have already done this and you can find the recovery disks again. ;)
    If not you have to follow the instructions posted by Andrej: You have to start HDD recovery feature to get rid of this. Enter the advanced boot menu of Windows where you can choose to start in Windows in safe mode, etc. and select Repair my computer. Vista will load some files and on new window you can choose the Toshiba HDD recovery feature.

  • Satellite A300-114 - Won't reinitate after screen shuts down

    Hello.
    I have a Toshiba Satellite A300-114 running with Windows Vista Home Premium.
    It was working fine until two weeks ago, now, after some time of inactivity, the screen shuts down and it won't turn on agian. The Hard drive light blips but the Screen stays black. This is becoming more often.
    Does anybody have any ideia what the problem is?
    Thanks :)

    Sorry, I'll try to write with a more correct english.
    My problem was, when I leave my laptop alone, the display shutts off, the hard drive light under the touchpad keeps bleeping, but what ever I do the system doesn't "come back". I have to hard boot the computer.
    Now, i've tried with different power settings, and the same happens, and I also found out that when i have the "Turn off the display" set for never, the computer also starts working after leaving it alone for a while.
    I'm also not able to shut down the computer, I get the blue screen and the message "Closing" and nothing happens
    Message was edited by: jjginga

  • Satellite A300-1LT won't boot up - blank screen & no HDD activity

    I had a problem, touch pad won't work.
    I found on internet solution to shut down computer, take out battery, wait a little bit, and start again.
    That is when my problems start.
    When I placed battery back on, i turned on the laptop.
    Blank screen (nothing happens), led indicators are on (except for hdd), cd drive tries to read but nothing happens, and the fan is on.
    I tried everything that I could find (wait for 30 min, take battery out, start without battery, etc...) but no luck.
    My lap top is Satellite A300-1lt, and I had it for 2 months.
    I don't want to take it to service, unless it is really necessary, because i really need it now, I can't wait for weeks until it is returned.
    Can please somebody help me out, Im desperate....
    Thanks in advantage...

    Connect your notebook (with battery) to the AC power supply and leave it an hour and try to start your notebook again. If notebook starts again leave it running until the battery will be full charged again.
    I hope it will work properly again. I have had similar problem with my Satellite A300-1LI and I have do this. Now notebook runs perfectly with and without AC adapter.

  • Satellite A300-15A does not start up after Alcohol program installation

    Hi...
    I bought Satellite A300-15A yesterday and after completing the Vista installation process, I tried to install "Alcohol" but my notebook shutdown and now I'm not able to start notebook.
    It is not starting in any mode.
    I forget to make recovery discs. I think Alcohol is not compatible with Vista. Error which i receive is below.
    Can anyone tell me the solution?
    Please help urgently
    "A problem has been detected and Windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

    Sounds like a familiar problem to me, as I had the same one with the Daemon tools. After installing those tools I couldn't start my Windows XP any more. I guess it somehow mixed up some drivers or registry entries, but not sure about that.
    Ok, you can try to deinstall the tool by first starting Vista in safe mode (press F8 before Windows boot up).
    You should be then able to enter Vista without problem.

  • Satellite L30 PSL33E won't start at all - LED flashes six times

    Hello,
    My poor mother is quite distraught! Her Satellite L30 PSL33E has just died.
    It completely shut down and now won't start at all.
    Orange light flashes six times when the power button is pressed.
    No hard drive, fan, screen or any other noise / activity.
    She has tried it without the battery.
    Some sort of hardware failure I imagine.
    Any ideas what this blink code means?
    Thanks in advance,
    D.

    I dont know what the code means but you can read it; short means 0 and long means 1
    Anyway, the error code means that an hardware fault was detected on the motherboard and only the motherboard replacement could help you?
    Why?
    because is really hard to repair a notebooks motherboard.
    Its mostly not possible if you dont have enough knowledge, experience and special tools.
    I think either you will contact the ASP in your country and will ask for a fix or you will have to buy a new notebook ;(

  • Satellite P300-13M won't start at all

    Hello everybody,
    my Satellite P300 - 13M with product number PSPC4E won't start at all!
    When I put down my screen, it automatically goes in hibernation mode. But the last time I did this was just too much apparently.. I've ejected my battery and put the adapter in to see if it would start. Negative. I've put the battery back and ejected the adapter. Negative. I've connected both the battery and adapter. Negative, no result at all.
    Does this mean the end of my laptop?
    Please help me as fast you guys can because this is my only working laptop.
    Many thanks
    Ps if you want specifications, then i cannot give you them. I don't know the specs by heart.

    On this virtual way it is not easy to say what is wrong there but if there is no reaction at all Im afraid mainboard is death.
    In my opinion repair is probably not the solution. New motherboard costs a lot of money. Either you can find used one, maybe refurbished and exchange it or sell notebook on eBay and buy new one.

  • Satellite L40-139 won't start

    ?02-19-2014 06:41 PM - edited ?02-19-2014 06:45 PM
    Hello, i have a problem with SATELLITE L40-139
    the thing is when i press power button, hard drive diode starts to flash, diode on cd-rom is lighted and the screen is black. I noticed that electornics in the CD-ROM makes a sound tick in the same way the hdd diode flashes (when it flashes i hear a tick form cd-rom, yes i unfolded whole notebook).
    I can only say that i connected HDD to my PC and it's working., well fan isn;t working too but i think it will start, after some time (like always it did)
    Now lets say about notebook crash circumstances: That was a year ago, it fell from 1 inch (such height ;]) i saw that ribbon cable that was connecting touchpad to the mohterboard was broken, and my computer diidn't start, i thought theres a problem, but i forgot about it and left the notebook for over 9 months (with disassebled hdd, cd-rom and battery) then i decided to try to switch it on.
    And viola! it works it boots etc.
    So after a month of being happy i got drunk that i couldn't sit on chair and i decided to lie with my laptop on bed, i just lied down and put notebook on my stomach and it crashed (freezed screen) i decided to reboot it, but it won't start.
    Heres a video with what i get during powering it up: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not luckily my phone fell into mud and lags when i record videos)
    Some people suggested that i should connect external display to see if theres any image, but the result is still the same. (Screen does not even power on)
    Maybe someone could help me fix it without sending it to customer service.
    Cheers.

    Hi
    >So after a month of being happy i got drunk that i couldn't sit on chair and i decided to lie with my laptop on bed, i just lied down and put notebook on my stomach and it crashed (freezed screen) i decided to reboot it, but it won't start.
    I think the notebook overheated or something like that
    Maybe its just an RAM problem and therefore it would be useful to test the unit in connection with new, tested RAM modules but this is only an idea
    As Dr.Lamp already said, in worst case it might be a motherboard problem and this would mean that notebook fix would be a costly affair.

  • Satellite A105-S4164 - won't start only blank screen

    Hi all,
    I have a Toshiba Satellite A105-S4164 laptop that won't start.
    I thought that perhaps there is a problem with the battery. I took the battery out and then hooked up the laptop to the electrical outlet, made no difference. The blue lights in front the laptop, come on, but I don't hear any noise from the mother board or the fan. The laptop is purchased in July of 2006 and it is out of warranty.
    All I see is the blank screen.
    My guess is that the mother board must be replaced. I also had kept up with Symantic Anti virus and also windows XP upgrades prior to April 1, 2009.
    Thank you for your feedback.
    Seyed

    Can you see a picture on an external monitor?
    Well I think in this case the notebook should be checked by notebook technician. You should contact an ASP and ask for help. This would be the best way because the technician can make sure what parts are faulty.
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider

  • Satellite Pro 460 won't start with new hard drive in

    I recently got a Satellite Pro 460 but it had no hard drive in.
    It starts great with no drive in but as soon as I put a brand new hard drive in it won't start.
    I thought that it might be to new a hard drive so I took my old working drive out my old Toshiba Satellite and still it won't start.
    Any one got any ideas why this is and what can i do about it

    It sounds like 80GB is too large for that model, I really doubt the BIOS and Chipset can support more than 8GB HDD. 8GB may not even work.
    Here is some information regarding different HDD modes and limitations: http://www.adminxp.com/hardware/index.php?aid=129
    504MB - limitation where the system is limited by the compatibility with the values of the BIOS system and the ATA interface by help of using the CHS mode. This limitation is valid for older computers 286/386/486. (1024 cyl 16 heads x 63sectors/track x 512 = 528,482,304bytes - 504 MB). In many cases special programs will help (Disk Ontrack Manager - Seagate, Disk Wizard - WD). Some operating systems can have problems with this software support and can have higher requirements on your knowledge of the OS and used programs.
    2GB - Limitation of the maximal value of the FAT16 file system partition for DOS and Windows 9x. Some older computers cannot address more than 4095 cylinders (4,095 x 16 x 63x 512 - 2,113,413,120 bytes)
    4GB Limitation of Windows NT - Partition with the FAT16 system cannot be higher than 4GB - Fdisk cannot be used for creating, but the Disk manager is used (Disk management in Windows 2000)
    8GB - Limitation of the BIOS system. For the support of larger capacities you need extended functions of the BIOS system. Limitations valid for the x86 computers and some motherboards with Pentium and Pentium II processors. Some other operating systems must know how to use the extended BIOS functions (Extended Interrupt 13). We can use Windows NT 4.0 as an example where you need an updated disk driver or the Service Pack. (OS - DOS 6.xx and lower, Windows 3.x and lower and some other older OS do not have the support of the Ext. Int13).
    8 GB - Limitation of the FDISK program in the DOS 6.22 OS.
    ?? GB - Possible problem with disks larger than 67GB under Windows 9x... See article WD800
    32GB - (65535 x 16 x 63 x 512 - 33,822,351,360 bytes) other limitation of the BIOS system.
    68GB - Possible problem with disks larger than 67GB under Windows 9x... See article WD800
    137GB - Limit for the ATA specifications (28-bit addressing for particular sectors - 268435455 sectors - 137,438,952,960 bytes)
    2,2 TBytes - 32-bit addressing used by new operating systems (in Windows 98 by help of the FAT32 file system).
    144 PetaBytes - a limit for new ATA specification using 48-bit addressing, in peparation. Maxtor, Microsoft, VIA, Compaq and other companies under name Big Drives participate the development. The standard should be implemented and authorized by the ANSI NCITS T13 Technical Committee organization (www.t13.org) in the prepared ATA/ATAPI-6 standard (see www.maxtor.com/bigdrive)

  • Satellite A300-19R won't boot.

    Hi everyone.
    My notebook A300-19R won't boot to any device drive .
    When i press the power button it's start the POST then display Toshiba splash screen but when hi try to boot to the disk it's stay blocked and display a blacklight screen.
    I enter in setup BIOS and verify that the boot sequence is ok and it's detect all device correctly then i try to boot to recovery boot CD but the same problem appeared, i try many bootable disk but i get every time the same problem a blacklight screen after the toshiba splash screen.
    It there any user fix problem.
    THANKS.
    Khaled
    Message was edited by: uzoumaki

    Hi
    I found this thread and I would like to summery you issue;
    - You are not able to start the Windows OS; neither using the normal nor safe mode.
    - you are not able to boot from any bootable disks like recovery disk or other windows disk
    - you cannot recovery the notebook using the HDD image
    - You can see nothing on the screen, its black.
    - connecting external monitor does not help
    Unfortunately buddy, but it looks like a hardware malfunction something is wrong maybe the motherboard who knows
    I think the A300 should be covered by warranty therefore I would strongly recommend contacting the ASP in your country and to ask for the help!!!

  • Satellite L500-1DT won't start

    Hi
    My Satellite L500-1DT laptop won't start it goes into the start-up repair procedure automatically viewing the diagnostic and repair details it says it cannot determine what the problem is.
    If I select the advanced options I am asked to select a key board but then I get a message that says you must logon on to gain access to the repair functions and all I can do then is reboot.
    If I press F8 and try safe mode I just get the same repair features. I don't know what to do to proceed as all the options take me to the same place. Any help would be appreciated
    Thanks

    When you press F8 at start up can you see option Repair my computer?
    Have you created recovery DVD?

  • Satellite P100-286 won't start anymore

    Hi,
    I have a P100-286 which I don't use very often but today I tried to switch it on and all I get is a flash from the lights near the speakers and the power light comes on for a few seconds then nothing.
    The battery light is lit up red but it also won't start if I take the battery out a connect it to the mains?
    Is it likely the laptop is dead or could it just be the battery?
    I have only had it a few months and don't use it very often so the battery has not been under much load

    Hmm sounds not good!
    Try this firstly;
    Remove the battery and disconnect the AC adaptor for about 20min.
    After this short period, connect the battery and the AC adaptor again and try to start the notebook.
    If this simply procedure does not help, you will have to contact the ASP in your country for a notebook check.
    Your feedback is greatly appreciated.

  • Satellite Pro 2100 won't start at all - LED start flashing

    My SP2100 has started having power problems, and now won't start at all. The AC adapter green LED is on, as are the relevant lights on the laptop body (although the 'battery charging' light always stays orange these days). When I attempt switch on, boot up starts (and has in fact been successful on occasion until this morning), however the battery indicator and the adapter lights start flashing, and everything shuts down again.
    On the rare occasions when I get past this stage, the lights keep flashing, and the system soon shuts down again with a 'low battery' screen message. Until this morning, it would sometimes settle down, the computer stayed on, and the lights showed a steady state as normal.
    I initially thought that the problem was obviously the battery or the AC adapter, but now I'm beginning to think that it lies with laptop's internal power adapter (although I suspect that the battery is probably shot following all this part charging and discharging).
    Any ideas?

    Hi,
    I think you are right. Flashing LEDs are a sign that some hardware is faulty.
    I can't say what's exactly the problem, this should be checked by a technicain.
    On the other side I'm not sure if it is worth to repair such an old machine.
    Bye

  • Satellite P300D-110 won't start-up normally

    My P300-100D won't start-up normally.
    It hangs after showing the announcement that Windows is being started.
    First I have to start-up in Safe-mode, and if I'm lucky it will start normal after choosing 'restart".
    The strange thing is that this problem only appears after the laptop has been shut-down for some time.
    If I start up short after a shutdown, there seems to be no problem. I'm using Windows Vista Home Premium with SP1.
    Anyone any idea?
    Tnx in advance!

    A couple of things to think about or try in order to burrow further into the problem:
    1/
    If you hibernate or go to standby rather than shut down, what happens?
    2/
    What is "a long time"? We could be waiting "a long time" for your reply to #1 above. I was wondering whether your CMOS battery was not holding its charge or something. That's a long shot.

Maybe you are looking for

  • Acrobat XI no longer works after installing Project 2013

    Hello All, This one is really odd and I can't find any documentation anywhere.  I have a client that has Office 2010 and Acrobat XI Standard.  I just installed Project 2013 on the machine and now right clicking on any Office file will not show the op

  • Need help loading an external SWF

    I'm not very proficient in Flash, so any help will be greatly appreciated. I'm trying to load an external SWF with the following code: T1_Bttn_BloodCar.onRelease = function() { t1_images_mc.loadMovie("images/T1_Gallery/BloodCar_SWF/T1_BloodCar.swf");

  • Rotate didn't stay rotated once loaded to Youtube. Please help!

    I'm so frustrated, I can't believe it. I took a video of my grandbaby trying to line dance and I turned my camera so it was taking a portrait clip. When I realized I couldn't rotate it with quicktime, I paid for the $30 upgrade to pro because it said

  • Cannot install Raid Drivers from USB stick on Tecra S series

    I tried to install RAID Toshiba drivers (F6 stuff u know) using a USB pendrive and BIOS USB FDD emulation, though detected XP installation told me file sytem was unknown. Any help?

  • Freely Programmed help in Pop Up Window

    Hi,   Is it possible to display the data of freely programmed help in the pop up window. Thanks Raghavendra