Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

Hello and good day,
I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the sound and graphics driver for me).
My questions are - where can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The driver site in the Toshiba support page does not include those drivers and software)
Thank you very much
Roi Ben Simon

Hi
I have Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfect.
At first I must say that I don't know where you have searched drivers and Toshiba tools and utilities because all stuff is downloadable on Toshiba support & download page under http://eu.computers.toshiba-europe.com
It is logic that mic will not work if you didn't installed proper driver. Install drivers alone and not using Microsoft update. What you need are real and tested drivers and not some free drivers from internet.
Go to Toshiba download page and install all stuff following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Everything works well but missing some drivers
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - work properly.
-Synaptics driver

Similar Messages

  • Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

    Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)  --not able to use the Beats Speakers. Any software updates I need to install?
    This question was solved.
    View Solution.

    Hi Jim,
    You're welcome
    Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
    Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
    There is an alternative IDT Audio driver you may wish to try on the following link.
    http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
    Let me know if you get the same error with this version.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Mic problem after installing win7 through bootcamp

    i am having a problem of mic in my macbook after installing win7 through bootcamp if any one have solution please mail me

    yes, no luck there either.
    Now I cannot boot at all.
    I never had a problem wih the Mac OSX side only that  crappy microsoft software. Unfortunately
    there are a lot of woftware that I need for my work that only exist under micorsoft.

  • Sound Problems after installing Win7

    Hi all,
    Updated to windows 7 two days ago, had to work out a few bugs, nothing major, but anyways some minor annoyance persists. I don't get the popup windows when I adjust volume/treble/bass and the mute button doesn't turn orange like it used to when I muted the laptop and I dont get the clicking noises indicating the level changes. Also I noticed that the speakers sound a bit different...kind of a horrid sound. I tried adjusting the equilizer but that didn't help.  Minor inconveniences, I know, but I'd like to get my laptop working properly again. Anybody have any idea what course of action I should take?

    Hi bovahi,
    Welcome to the HP Community! I will be happy to assist you with your sound troubles. Here is the IDT High Definition Audio Codec for your model for Windows Vista. Try installing that and let me know how it goes.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Why is SSD so slow on Satellite A300 PSAG8E

    Guys hi,
    Please help me on the following question. I would like an admin to help me plz, or a very experienced user, if this is possible.
    2 weeks ago I bought an Satellite A300 PSAG8E. A couple of months ago before the purchase of this laptop, I had also bought an SSD OCZ 64 GB v2 core series drive. I tried several times to install the SSD on the laptop, but the response during windows installation and after during the use, the response of the drive is very, very slow. It is even slower than it is with its original 250 GB disk. I benchmarked the SSD with SISOFT SANDRA and confirmed my impression.
    The SSD was rated 5400 rpm, strangely the same speed as the original 250 GB HD that comes with the machine.
    I used different windows CD's (one with SP3, and one older version with SP2, both original windows) but nothing changed. I then installed my SSD on my desktop machine and the installation and use in windows environment, is blazingly fast. I put it back on the laptop and again it is very, very slow.
    What is going on? Do you have any suggestions? Is there any bug with using SSD's on my model?
    Is there any firmware upgrade?
    I suspect this has something to do with Laptop's transfer rate. Can you help me please?
    What can I do?
    Kind Regards,
    Dionisis Falireas

    Dear Niko_1
    thank you for your time, let me answer plz.
    1) The SSD was rated by Sandra benchmarkng. I believe that what Sandra means is that according to its read and write measurements, the SDD is as fast as an 5400 drive. Which is not the case, because when i install it on my desktop is very very fast.
    2) Imagine that while i had the ssd installed, i tried to copy 600mb (megabytes). The time it took was 16 minutes! Something is wrong.
    3) Regarding what you said, about sata drivers. Which raid compatible driver should i install? I have browsed for days the internet, and i didnt see any forum saying that i should install raid drivers for the ssd. Probably you have a point, but shouldn't this be a common problem and everywhere on the internet, if this was teh case for an SSD to work?
    4) Another point you may have is about the sata driver. You say that sp3 does not include sata drivers. Where can i find these sata drivers, to test it? because my original hard drive for toshiba, is SATA and as far as i know, winodws do recognize sata drivers. Can you clarify plz?

  • Satellite A300-PSAG8E - HDD indicator is blinking even when i do nothing

    these are my problems
    1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Upgraded BIOS to version 2.20
    OS: Windows 7 Ultimate
    Laptop: Toshiba Satellite A300-PSAG8E
    Anyone know the solutions?
    Need help please! Thank you

    > 1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    Even if you dont touch the notebook, the HDD is running and different applications access the data. The applications and processes which are running in the background would cause this blinking. Note; this is not a problem!
    > 2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Disable the stand by modem and disable the settings which disable the screen while notebook is not in use. This can be done in Windows 7 power management.

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Printing problems after installing the Epson Printer Driver 2.16

    Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

    Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

  • Problem after installing 10.4.8

    Hello,
    I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
    So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
    The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
    Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
    Thanks...

    How did you update? Mac OS X 10.4.8 Update (delta)?
    http://docs.info.apple.com/article.html?artnum=304200
    After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 
    2.0 MacBook • 100GB HD • 2GB RAM   Mac OS X (10.4.7)   60G Photo iPod • AppleCare

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HT1338 Can't access my mac os side after installing win7

    I just installed windows 7 on my new mac using boot camp. I followed all the steps but after installing win7 there is no way I can access my mac os partition. I tried to reboot with the Alt/option key pressed but I am presented with a window asking me to provide a password. When I enter my password, it won't let me in. It just delete the password. I have re-tried several times but it won't work. My question are:
    1. Is there any way I can install windows support software (for the driver) from bootcamp since I cannot access my mac side.
    2. I tried to download and install bootcamp but it doesn't work since it says I do not need to install any bootcamp update.
    3. Is there any ways I can go past the mac password screen? I really don't understand why it doesn't accept my password. I am the only administrator and user of my computer

    #3. Try things in this Reset Password faq.
    DALE

  • DVD drive problem after installing 10.5.6

    I have MacBook Pro 15",
    Model Identifier-MacBookPro 2,2,
    Intel Core 2 Duo 2.16 Ghz
    Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
    But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
    Before I install this update, everyting was ok!
    Please Help!!
    P.S Sorry, for my english

    Hi Drug;
    Have you tried resetting PRAM by holding down control, option, P and R during reboot?
    Allan

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

  • Toshiba Satellite A300-20T shuts down after 5 seconds!!

    my laptop satellite A300-20T shuts down after 5 seconds of booting , i dont know why ?? and i searched for support in the website and didn't find it in the model list, also i don't know why ???!!
    i want to know why it shuts down , and how can i communicate with support

    Yours would not appear to be a US model. We need the Part Number for your laptop, like PSAG8U-05K02C. You can find this on the Toshiba label on the bottom of your laptop. As well, what country was it originally purchased in. In addition, what is your operating system version, like Windows Vista 32bit?
    Mike

Maybe you are looking for