Satellite A300 - Win 7 - newnext.me negine.dll missing

Every time I startup my laptop I get an error message:
+There was a problem starting+
+C:\Users\Toshiba\AppData\Roaming\newnext.me\negin e.dll+
+The specified module could not be found.+
Otherwise laptop seems to be fine.
I am using Windows 7 with AVG.
Thy in advance

Hi
The nengine.dll file belongs to "NewNext Helper Engine"
The software is called +nengine+ developed by NewNextDotMe
For me it looks like you installed this 3rd party software on your notebook and now there is some problem with this file.
I think you should simply uninstall this nengine application from the system to solve this annoying issue.
If you really need this software, you can install it once it has been removed.

Similar Messages

Satellite A300-1EG - after upgrade to Vista Premium missing some options

Floor of year back I have bought the laptop Toshiba SATELLITE A300-1EG (Short Model No PSAG4E) . Because of some problems it was necessary to reinstall Windows.
When bought in the laptop stood Windows Vista Home. Now to me have established Windows Vista Ultimate. A problem with some drivers, I can not adjust brightness and sharpness of the screen, and screen prompts do not work. Writes "or for screen prompt the updated video card is required, or the video card compatible with Direct3D" is required.
Help please!

Hello
This sound like that you have forgotten to install the display driver or did you install it?
I think you should visit the Toshiba European website and download the display driver:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
It should not be a problem to install it. Just follow the screen instructions. ;)
Greets

Satellite A300 - Win 7 installation issues

I purchased this Ultimate edition of windows 7 and now installing this o.s on my computer, i end up with this error "Windows setup could not configure windows to run on this computer's hardware", when it reaches the point "Completing installation" the monitor display, after 20-35 seconds, turns off for about 1.5 Seconds then back on before that thing comes up in very nice text hard to read for a while.....
Guys give me a solution but please don't tell me to remove my memory unit(RAM) because i've done that many times but the same error exists...
I have 2 laptops....the current one i am using is running Windows vista ultimate 64 and 86 vista home premium in dual boot.
It came pref-installed with Home premium but i prefer not deleting it unless replaced by the new 7 o.s. my other laptop is only a 1.86 Ghz compaq presario
I have 4Gb ram, 2.27Ghz P8400 PSAGCA - 03C010 Toshiba A300 System unit, this current one.
I did remove and replace so many times with that Ram thing, it still didn't work.
I have an updated Bios but that didn't help either.
There is one thing, the installer shows an additional box that shows amount of memory being processed during the installation.
But that doesn't show on this laptop that i am using ryt now before that error comes up in the end of the install..
the other laptop clearly shows % and amount of memory processed at the bottom of the installer....
I don't understand!
SATA mode is also set to compatibility for the advantage of the installer at every reboot, but this doesn't work with vista as it crashes all the time, so i always do the install from boot dvd when in compatibility mode set from bios edit...but nope, that didn't help either...
Windows 7 upgrade advisor only shows 3 issues. "Authen" that fingerprint program, i think that isn't a conflict...it just shouldn't work after the install is complete....
Anyways....guys any idea what this might be?

Hi
I agree with the user above and I recommend using the AHCI mode in BIOS. This allows a better performance and you can use the best HDD speed.
But therefore the Intel Storage Manager is necessary. You can only use AHCI mode after reinstalling the whole system. So you have to boot from Windows 7 disk and then load the Intel Storage Manager drivers. You can copy these drivers on an USB stick to load it during the setup.
By the way: This seems to be a common issue. Have you tried the forum search? If not you should do it!!
You will find similar threads about this issue where you can also find some interesting postings and tips.
Good luck! :)

Satellite A300 Win XP 64bit drivers requested

Hello people,
I am trying to figure out if Toshiba has drivers for win xp 64 bit.There are drivers for xp but there isn't a discrimination like in Vista where you can get 32 or 64 bit drivers from the drop-down list.
Thanx for your answer in advance :)

Hi
Win XP 64bit drivers do not exist on the Toshiba pages
I doubt you will find it on any of Toshiba page you will need to search on 3rd party pages but this will be a hard venture because the Win XP 64bit was not so popular like 32bit OS.
But since the 4GB RAM issue which is related to 32bit OS limitation many people try the Win XP 64bit. But most manufactures dont develop the Win XP 64bit drivers in this time Win 7 is the future and king. You know.

Satellite A300 Win 7 64bit - ATI Radeon HD 3650 black fullscreen in games

Hello
I've got a problem, everytime I try to turn a game (and if its default window mode is fullscreen) my monitor goes all black and my pc just blocks there, there is no way to get out unless to manually shutdown the laptop (pressing the power button for 5secs).
However if I put the mode to windowed move, it works fine =/
I've already updated my drivers, and now I'm going to try the windows xp mode that was reccomended in this forum.
Any other suggestions?
Thanks in advance

Just adding, after a while of playing the video card stopped responding (according to a windows warning).
It seems it's my video card that is on its dying breath.

PSE 7 won't install on Win 7...msvcp71.dll missing?

I just upgraded (Custom install) my XP laptop to Win 7 64bit and tried reinstalling PSE
7, but get a "program can't start because MSVCP71.dll is missing" . When I first got the error I called Dell and was able to replace the missing file from my SYST32 folder. I'm still getting the error , and of course Adobe won't support 7 on 7. Trying not to spend money I don't have on upgrading to PSE8. Any ideas?
Rob

Bingo! When I got help from Dell, the rep had me paste it (MSVCP71.dll only, not the MSVCR71.dll file) into System32, not SysWOW64. I told him I was using a 64 bit version of Windows 7, but I think he automatically things 32 bit. Anyway, I copied the file from System32 ofer to WOW64 and it worked. Thanks so much, Ankush! Hopefully the program will work well in Windows 7 ;-)

Satellite A300-1G2 can't install Win Xp - missing HDD

Hello,
I have just bought a new Satellite A300-1G2 without an operating system. Now I would like to install Win XP, however during instalation I receive a message that says that windows setup cannot find any hard drives installed on the system. What could be the problem?

I'm not sure whether what I'm going to write here is correct or not (oops) because I never did some of these stuff myself. To install XP I put my hard drive in compatibility mode just like you did and so far my XP works fine. BUT my install CD was a weird one so I cannot guarantee that this is the case for all others.
Apparently to put it back on the SATA AHCI mode you need to install a driver or software (sorry about being ambiguous but I decided to stick to using XP in the compatibility mode) called Matrix something. I'm sure there are hundreds of other threads on this issue so it's best for you to check them again and get some more correct information.
If you don't that and change your bios to SATA AHCI mode you'll get those horrible blue screens... That's as far as I know. Hope that helps

Re: Win 7 64bit driver request for Satellite A300-247 PSAGCE

Hello everyone,
I have an Satellite A300-247 PSAGCE With the Vista operating system and I want to replace to Windows 7 64-bit I do not know which driver should prepare before formatting?
Video card Driver not found too?
Thank you all oren !!

> can not touch pad scroll up with the finger ?
Download the touchpad driver released for newer notebook series for example A660 or other
> I had a web camera Software can not find ?
The same like touchpad driver you can use the software from other notebook series where Win 7 64bit is fully supported.
> The lighting of the Touch buttons Always on And you can not turn off?
This option is placed in BIOS. Its called Illumination and you can enable and disable this in BIOS.

Re: Satellite A300 - Enable AHCI mode without having to reinstall Win XP

1- Extract [http://www.mediafire.com/file/qjidwo20rnt/Toshiba A300 WindowsXP 32bit ICH9M.zip]
1- Copy the *iaStor.sys* File into the \Windows\System32\Drivers\
2- Run *ich9m.reg*
3- Reboot end enter *BIOS* and switch to *AHCI*-mode
4- Use the downloaded driver to install manually the driver when windows detected it.
[Windows system view|http://img24.imageshack.us/img24/8338/20090204185534bv0.png]
[HD Tune Before|http://img15.imageshack.us/img15/1043/hdtune1ul1.png]
[HD Tune After|http://img15.imageshack.us/img15/8168/hdtune2rw8.png]

I spent too much time (almost 2 days) at trying and reading forum, so I think that it would be useful to share my experiment, especially because it's a frequent problem. ( <a href="http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39771&tstart=0" target="_newWindow" class="jive-link-external">Satellite A300 - Need SATA driver for Windows XP</a> , <a href="http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=36343" target="_newWindow" class="jive-link-external">Win XP on Satellite A300 - SATA HDD slow - eats CPU</a> , <a href="http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=139169" target="_newWindow" class="jive-link-external">Satellite Pro A300 and WIN XP SATA problem </a> , <a href="http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=147048" target="_newWindow" class="jive-link-external">Xp won't install on Satellite A300 PSAGCA with the AHCI enabled</a> )<br />
<br />
Performance in compatibility is really poor (slowness at copying big files, windows takes so long to start up, CPU consumption), it’s 20 times better with SATA.<br />
<br />
(And sorry for my poor English :p )

Satellite A300 PSAGQE - Driver errors after uprgading to Win 7

I have "Toshiba Satellite A300 PSAGQE" 2 days ago I updated my Windows Vista to Windows 7.
Many Driver are ok and working without trouble but 3 drivers are makin trouble as I have noticed.
This are;
Toshiba Firmware Linkage Driver ACPI\TOS1901
Ricoh RL5C592 Memory Stick Bus Host Adapter
Ricoh RL5C843 SD/MMC Host Controller
my "FN" is not working and the LED lights are not going on!!!
I searched the whole internet for solutions and saw many people having the same trouble. There are problems but non solutions...
I hope I can fiend help for this problmes here.

Hi Yol_Gezer,
To be honest for me it doesnt sound like problems because you need only new drivers for your notebook they are listed on the Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
You need the card reader and Bluetooth driver I think.
Regarding the FN and illumination You should install Toshiba Value Added Package. ;)

Satellite A300 - inbuilt Chicony webcam won't work with Win Live Messenger

Hello
I just bought a *Satellite A300-1MC* (runs on Vista Home Premium), and downloaded Windows Live Mail And Live Messenger.
The inbuilt webcam won't work with Live Messenger ; and when selecting Tool, Audi + Vieo Setup in Messenger I get thye following message : "We are unable to run Audi Video setup".
The webcam works fine with the Camera Assisant Software.
I have tried : 1) killing the C.A. Software and starting Messenger ; 2) dowanloading a webcam driver from Toshiba website ; 3) Updating Windows Vista
None of the above work.
Any suggestion gladly received.....
Thomas

Hi,
Many thanks for the advice.
I have downloaded and installed ManyCam 2.3, then rebooted.
The ManyCam software works fine, and picks up signal from the inbuild webcam.
But Windows Live Messenger still doesn't pick up the camera. I can not start a Video call or go to" Video Audio setup".
I have Windows Live Messenger version 14.0.8064 (installed on Tuesday).
Funny enough, yahoo messenger works fine : it gets a signal from the webcam.
Conclusion : i think it is Windows Live Messenger that doesn't work properly for some reason.
I have ordered a new external webcam, in the meantime.
Thomas

Re: Satellite A300-22F - Win 7 Camera assistant software

hey,
i post my question one more time to make sure that i get answers.
My problem is that i just installed Windows 7 on my notebook Toshiba Satellite A 300-22F and my Web cam doesnt work anymore and my camera assistant software is missing.
I looked on the homepage of toshiba but there is no download for my series number .
I dont know what to do anymore,please help me!!!
(sorry,if my english is not the best, im from germany:))
Help!!

> i post my question one more time to make sure that i get answers.
Double posts are not allowed ;)
> My problem is that i just installed Windows 7 on my notebook Toshiba Satellite A300-22F and my Web cam doesnt work anymore and my camera assistant software is missing
You have to install the Chicony webcam software. The A300-22F seems to belongs to PSAGCE series but you can try to install the webcam software which was released for other A300 series.
For example this:
+Webcam driver Windows Vista 32 Bit v6.2.238.1217+
http://support1.toshiba-tro.de/tedd-files2/0/webcam-20080428125023.zip

Satellite A300-1GN - Media buttons don't work with Win 7

Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?

Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets

Re: How to install Win XP on a Satellite A300-15D

Can anyone help me with the procedures on how to permanently delete Vista Home Premium and replace it with Windows XP Professional?
Once WinXP Pro is installed, will the drivers for my laptop Satellite A300-15D still work because of the new operating system?

Hi
If you want to replace the Vista with your Windows XP OS then just simply boot from the Windows XP CD and follow the installation instruction on the screen.
After the XP OS installation you will have to visit the Toshiba European driver page and will need to download the compatible XP drivers!
(maybe you could do this before formatting the HDD and Vista)
Your notebook seems to belong to the *PSAJ4E* series.
Please choose this number before you would start the driver download.
By the way; The notebook support the SATA controller therefore you will need to include the SATA driver during the XP setup procedure.
The Storage Manager which is available on the Toshiba driver page contains such SATA driver.
If you dont know how to include such SATA driver please use the forum search option for searching.
There are a lot of similar threads regarding the SATA driver installation.
Bye

Satellite A300-20P: FN keys don't work with Win 7

FN keys don`t work on win7 satellite A300 20P

Hi
I had the same problem on my Satellite A300 after Windows 7 installation. So I downloaded and installed Toshiba Value Added Package. It was pretty easy, just few clicks and one restart. What happened after restart? Yes, the FN keys works!!! :)
Here you can get it:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Satellite A300 - Win 7 - newnext.me negine.dll missing

Similar Messages

Maybe you are looking for