Satellite A300 - won't connect to WPA secured network

Help please.... new Toshiba Satellite A300 - running XP professional with atheros AR9281 wireless network adapter (driver 7.6.0.200) won't connect to WAP secure networks, but seems to be fine with WEP and unsecured networks?
I can connect to my WAP secure network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is definitely with this adapter or driver. I have update bios and tried updating driver, but no luck. Current driver is (I think) most up to date?
Would be grateful for your help.
Thank you.

On the Toshiba website is a newer driver version available (7.6.1.149.1)
So I would try the new driver.
Check the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

Similar Messages

  • IPad 2 can only connect to unsecured Wireless network.  It won't connect to my secured network at home or at work

    Two days ago my ipad 2 with (wifi only) will not connect to my secured network even though it show's up as available with a strong signal.  It keeps rejecting my password.  I brought the Ipad to work and the same issue.  However I am able to connect to an unsecured wireless network with no issue.  Is this a network/router issue or an ipad issue?  If it's a network issue what is the fix? calling my internet provider to change router settings?

    - I've used the correct pw (it worked till 2 days ago)
    - I use road runner from Time warner, not sure of the mac address filtering
    -Security is WPA PSK.
    I called road runner to request they remove my pw and see if i can access my wireless if that works which i believe it will then it has to be a security issue.  I'm using a 802.11n wifi access point, if that means anything.

  • IPod touch won't work with WPA secured network

    I'm trying to put my touch on my home network which has WPA security. I have a problem in that one of the characters in my 50 characters WPA key is not available on my iPod! (The " ` " character. It's not an apostrophe like " ' ". It's the one on the tilde button.) I don't even know if I had that character that it would work. Is there anyway that I can change my WPA key, or have a simpler password? It seems like I shouldn't have to input like 50 characters if I want to access my network. Is there something I configure in my network settings? Any help is appreciated.

    I use WPA2 and have no problems connecting. I must clarify that I have a mixed network of Airport Extreme 802.11n (operating on 5GHz) & 802.11g (operating on 2.4GHz) routers. Only the 802.11g router's network shows on the Touch though.
    You should replace the character that's not on the iPod in your network password. It should work if it's operating on the standard (default?) 2.4GHz. I don't think that 802.11g or n matters. As for entering the password on the Touch every time you want to join your network, that won't be necessary. I just double -checked. The network name and settings are memorized by the Touch.

  • Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

    Why isn't my wifi connecting over a secure network? I typed the password in correctly, but it won't seem to connect.

    Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
    Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
    If that didn't help, try here >  Apple - Support - iPad - Wi-Fi Assistant
    And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

  • Won't connect to a wireless network that it sees

    My iPad (iOS 6.1.3) sees my wireless network extender but won't connect to it. Just started today. Any ideas or remedies? I've tried unlearning the network and relearning. I've also done a reset, etc. nothing works. As I said, it sees the network but when it tries to connect, the little wheels just spin. BTW, it DOES see and connect to the main wireless router network fine.
    Thanks for any ideas.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • ATV2 won't connect to my wireless network.

    My ATV2 won't connect to my wireless network, although the network shows up in the list of networks and I'm using the correct password.  A laptop approximately 1 foot away connects wirelessly to the network.  ATV has worked in the past - haven't tried it recently.  Tried reset - didn't help.  Any suggestions?

    If your wireless router is setup to use WPA or WPA2 security then you need to make sure you match this within your Apple TV device.
    You probably already know to match case sensitivity in your password.
    We posted Apple TV tips at the bottom of the page located at this link: http://www.allabouthomeelectronics.com/apple-tv-airplay.html

  • Cannot connect to the secure network but can to the guest network

    I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
    I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
    Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
    I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.

    Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
    In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked!

  • Time capsule first said the back up was delayed no it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address help!

    time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!

    Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??

  • Touch won't connect to my wireless network

    Sometimes my touch won't connect to my wireless network even though settings show it connected with good signal strength.  When I go to the main screen the signal strength icon (upper left) doesn't appear.  Any ideas?

    Try:
    - A reset. Nothing will be lost,
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Powering off and then back on the router.
    - Reset Nework settings: Settings>General>Reser>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

    My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

    you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
    next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
    once you remove all of these airport passwords, quit the keychain
    turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue!

  • Airport shows I am connected to a secure network, but Safari will not connect nor will any other internet software.

    I cannot connect via Safari to a live Internet connection.  System preferences show Airport is on and connected to a secure network.  I am able to connect using my iPad and other devices.

    Thanks. Turns out that I had to re list the router and update its password along with resetting the DHCP.  Once that was accomplished all seemed to work fine again.  Just can't figure out why the connection was disrupted.

  • HP Deskjet 3050 - Unable to connect to WPA secured wireless network

    Hello,
    My first post here so please excuse any faux pas on my part.  I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since.  I'd be really grateful if someone could possibly advise on how I can resolve this.
    I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue.  I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer.  If I disable the security, the printer connects fine.
    I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled.  The router is broadcasting on 802.11G/N mixed mode.
    I'm installing the software supplied on the setup CD on a Windows XP SP3 system.  I have confirmed that the network the PC and printer are connected to are the same.
    A question as well, if I may:  I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010.  The release notes indicate improved networking, but don't elaborate beyond this.  Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
    Finally, just a note that I'm partially sighted and am using a screen reader on all systems.  I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
    Thanks in advance for your help, which I really will appreciated.
    Have a pleasant day,
    All the best for now and take care,
    Hussein.
    It's not the fact it can't be done, it's the fact it hasn't been done, yet.
    This question was solved.
    View Solution.

    HI,
    firstly, apologies for the delay getting back to you.  Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
    Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved.  It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
    To resolve the problem, I did the following:
    1. Disable all security options for the network, so it's just an open network.
    2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
    3. Locate the printer's IP address.  I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
    4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
    5. Under the advanced options, configure the settings for the network, including security protocol and passphrase.  Remember to enter the SSID of the network exactly as configured on the router.
    6. Apply the settings and log out of the printer's control panel.
    7. Log back into the router's control panel and re-apply the security options.  Be sure that they match those match those entered for the printer.
    Hopefully this will be of use to others in the same position.
    Thanks again for your time.
    Best,
    H.
    It's not the fact it can't be done, it's the fact it hasn't been done, yet.

  • Satellite A300-1OM wirless connection changed from connected to limited

    I am having issues with continual use of the internet via my wireless home network, which appears to be an intermittent problem.
    On many occasions while using my wireless internet connection the connection has changed from 'connected' to 'limited connectivity', which then leads to difficulty opening the 'Network and Sharing Centre' and also 'Connect To a Wireless Network' dialog boxes, and when attempting to diagnose the problem using windows it only suggests moving closer to or restarting my wireless router, which I know to be work fine as I can operate another toshiba laptop and browse the internet using the same router in the same location.
    It seems the only method to repair this problem is to restart the computer, reopen the Network and Sharing Centre, click on the red 'X' between the graphic of my computer and the image of the earth (internet) allowing windows to diagnose the problem, and then choose 'turn on wireless connectivity', and after doing this the network begins operating as normal...until it repeats the malfunction a few hours later :(

    I've updated the WiFi Driver and BIOS, how can I find out what Wireless standard my notebook is using? As you can imagine with an intermittent issue, I won't know if the problem is fixed until (if) it fails again.
    I'm using Vista Home Premium
    With regards to restarting the router, why might this make any difference when it is evident from using two toshiba notebooks side by side that the router is still providing internet access to my other notebook once this notebook has downgraded to 'limited connectivity'?
    Thanks

  • HP Officejet 6500A Printer will not connect to WPA wireless network.

    An HP Network Configuartion Report from my printer states that the printer's Authentication Type is WPA-PSK. My router is WPA2 or WPA and won't connect to the printer. What is the solution to this problem?

    Hi DWILKEN welcome to the Forum,
    I understand that you are trying to get your printer connected to your router. I will try my best to help you do this. In this document for Installing the Printer Software on a Wired (Ethernet) or Wireless Network (Using an Access Point) are the steps needed to install the printer on the router. In order to connect them you will need to connect the printer to the wireless network before trying to install it on your computer.
    Here is a document on How to Find the WEP or WPA Key or Password for Your Network as you will need this to connect your printer to your router.
    I hope this information helps, let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • IChat won't connect on school internet network...

    hey, not sure which version if iChat i have but for some reason it won't connect on my school wireless networks.
    my AIM does but ichat doesn't. What is the problem for this?
    PS: off topic, AIM always shows all my buddies offline and online instead of just online in one list....anyone know how i can clean that up? thanks but ichat issue plz help me with thanks!

    Hi,
    Most Servers and Domestic routing device have a range of ports up to port 1024 open as default.
    Port 80 is used By Web Browsers
    Port 443 is used by Web Browsers on Secure Sites like the Apple Discussion Login page and Banks, PayPal etc.
    Mail Also sues port 443 and 110, and a whole range of other below 1024 depending on whether they are POP or IMAP and th service that runs them.
    As I suggested Port 443 It would have expected it to be open and allowed you to at Least Log on with iChat.
    You could try looking at your Mail Setting and use a port listed there if you can get mail from the server involved. (port 25 may only be open to your ISP's Mail Server from home and often data is not passed on to other Mail servers on that port so it will be blocked at the ISP even if you get mail)
    After that chat to the IT guys and see what they say about IM apps in general (They may be blocking the IPs for the servers to "protect" Bandwitdh or for "Security" purposes.
    11:02 PM Wednesday; May 27, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for

  • KT3 Ultra 2 Keyboard lock-ups

    I have a problem I haven't seen the answer to.  Just built a PC with MSI KT3 Ultra 2, 2000XP processor, GeForce4 Ti 4200 64 MB vid card, 256MB, Windows ME.  System has been stable for about 2 weeks now, but yesterday and today it has locked up the ke

  • Populating Drop-down List in Interactive Forms for Java

    Hi,all I need to populate a drop-down list in Interactive Form. I tried to do it by using Dynamic Properties of the drop-down list,but didn't give nothing.At the same time I have successfully populated a simple drop-down list(on webdynpro view),which

  • Beware of Zoomify and Flash CS3!

    Does anyone else have problems getting Zoomifyer for Flash to work in Flash CS3 on Mac OSX? Everytime I launch the Component Inspector in the Zoomify Viewer Component I get an alert saying: "Reference Error ZoomifyFileAPI is not defined". This is one

  • Need help for using at new command

    Hi   experts can u please help me .i want to execute the following : customer name       item no   gaurav                      1 gopi                          2 santosh                      1 raju                            2 gaurav                  

  • Problem with pages launching after update on Nov 23, 2013

    I haven't used pages until now.  I have update to Maverick (10.9); have update for pages from Nov. 23, 2013.  I tried to open it up but it will not open.  Has anyone had this problem. I have Keynote and it is not working, but have numbers and it is w