Satellite A300-Y00 black screen but fan starting

I bought a TOSHIBA satellite A300/Y00 in June 2008, i.e. 16 months ago. Model number PSAGOA-02Y. After ten months it suddenly did not boot. It sounds like the CPU and the fan is starting but the screen and the led below the screen were all black. I tried to connect it to an external monitor but that screen was black too. I gave it to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced it for free as it was still under warranty.
A few weeks ago the same thing happened again. I turned it off and for some random reason it started as usual a few hours later. I called Toshiba to say that I think the computer will crash soon again. They said they could take it in for service but if they could not find anything wrong with it they would charge me x dollars. I did not give it in for service. I even went to a local Toshiba support guy who said he could not find anything wrong with my computer and that there was nothing he could do.
Now the same thing is happening again. This time I can't get it to start again. Of course their fantastic 3 months warranty for the last motherboard has expired. I tried to take out the battery and start it only on power but it does not help.
I don't want to pay $500 for a new motherboard and then have it breaking down again. It is obvious it is a hardware problem and I think Toshiba should replace my computer without charges.
Anyone with similar problems? Any advice? Getting pretty annoyed....

Hello!
Have you already contacted the authorized service provider again? If not, do it please! You should speak with the technicians again and then you will see what they can do for you.
I can understand you that this is annoyed but such things can happen and I think the ASP will do the best to help you. To be honest I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and competent. Its always nice to talk with them a little bit.
Im not a technician but maybe they can repair it as a gesture of goodwill or you have only to pay the mainboard and not the exchange
Greets

Similar Messages

  • Satellite Pro L40: black screen but faint image in the background

    Satellite Pro L40-17H (PSL4BE-00T005EN)
    Hello,
    I would appreciate some help with the following problem:
    SYMPTOMS: Screen is black, but I can see that there is a faint image in the background.
    I get a good image in external monitor.
    I suspect, _among others_, that there may be a faulty *lid sensor/switch*, but I have been unable to locate it, although I have disassembled the unit.
    If somebody knows, please let me have the exact *location* where I should look for the switch.
    Thank you

    Thank you RandyRoberts
    You are probably right, it is likely that the inverter is faulty, or it might be a bad lamp.
    Nevertheless, I cannot exclude the possibility that there is a bad or stuck lid switch. That is why I insist to check that one out as well.
    I would still like to know where the lid switch is located on the L40.
    Thanks and regards.

  • Equium A300 - webcam shows black screen but no picture

    Equium A300, webcam shows black screen but no picture.
    Anyone have isea as to how to regain picture?

    Hi
    How did you check this?
    Did you start the webcam software and checked the picture or do you the internal cam in connection with Skype or similar software?
    Did you try to reinstall the webcam software?
    No? well then do this

  • After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

    After yesterday's update sent  a personal video  it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
    On my own windows operated laptop when l open the video the start button is crossed through
    Is there something l need to do? I can view the videos fine on my iPad ?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Satellite A305-S6898 - half black screen on the start-up

    I purchased this laptop back in the beginning of March and had to return it to store due to an issue at start-up when half the screen would turn black on the Windows log in screen. They ordered me a new one that I received about 3 weeks ago and I used it for about a week before I got the same issue of half black screen with the start-up.
    Now it has been running really slow and about an hour ago I had it freeze up on me and my entire screen turn into a bunch of colorful lines.
    I had to restart into safe-mode and run a virus scan just to make sure that wasn't my problem.
    I don't download anything on this computer other than the basic messengers and photo editing programs.
    I have an HP MP7170N desktop which i use to download everything that seems to run quicker than the laptop and I use photo programs, downloads torrents and store most of my music and photos on that one and it only has 1GB of memory compared to this ones 4GB.
    What is the deal?
    Anyone have any ideas as to what I can do.
    I can't really return it to the store because they only give a 14-day grace period for returns.

    > I got the same issue of half black screen with the start-up.
    > Now it has been running really slow and about an hour ago I had it freeze up on me and my entire screen turn into a bunch of colorful lines.
    Looks not good for me it sounds a little bit like graphic issue.
    Before you would contact a professional Toshiba authorized service provider it would be interesting to know if you would notice some improvements after recovery procedure and BIOS update.
    I believe you didnt get an recovery disk because you can create it using the preinstalled Toshiba software check your user manual how to create recovery disk
    So after new installation check the notebook usability and if similar issues still persists.
    If nothing will be changed its strongly recommended to contact an ASP

  • Satellite A300-Y00 - How to use a joystick for Games?

    How can I connect my Satellite A300/y00 with joystick so I can play games without keyboard because its very hard to use?
    Which one should i get, ps2 alike joystick or xbox joystick since xbox for microsoft and im using microsoft software such vista...??
    But my laptop has something called game controller in control panel, does it mean i still install the software in order to use the joystick??
    Thanx

    Hi Mickey
    I see youve got many questions and most questions can be answered by device (joystick) manufacturer
    The point is that most gamepads or joysticks can be connected to USB port (like USB mouse). In most cases its not necessary to install any drivers because its a plug-and-play device (simply connect and use)
    But different manufacturers provides own drivers together with the own products
    In such cases such drivers should be installed too

  • Imac 20" intel Leopard black screen, does not start up

    Imac 20" intel Leopard black screen, does not start up,
    yestarday i put my imac aluminium in sleep, when i wake up this morning the computer did not start up from sleep and also did not start up from the power button back, i try several times and nothing, i hear the sound of the start up but i remain with a black screen. What can be the cause? The video , maybe? I did not install any hardware lately on it.
    note: i have a wireless keyboard & mouse
    Message was edited by: mindsoul

    Not running Leopard (Panther), but I have a similar problem on my 24" iMac. Computer was working fine last night (I shut it down) and when I went to boot up this morning the computer is stuck on a black screen.
    The boot up sound is initiated but nothing after that. The power light stays at full brightness, if I touch the power button the light blinks and then after a while it goes out. A full reset does nothing. I've tried reseting my PRAM, which works because I hear the start up sound twice, but no change to the black screen.
    I don't have access to another Mac, would inserting the Startup Disc I received with the computer do anything?

  • My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

    I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
    (core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
    it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
    I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle  another problem that I tell him.
    I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?

    baltwo wrote:
    Can't recall which I used to do the dynamic repartitioning.
    I'm betting that it was originally Partitioned with Snow Leopard.
    As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition.

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

  • Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    Try:
    - Another cable
    - Another USB port
    - Reboot the computer
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • Why do I get a black screen when I start my macbook pro?

    why do I get a black screen when I start my MacBook pro?

    Hello szimmerli2 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.

  • Sending videos from iphone 4s to pc. Why do I get black screen but have sound

    Sending videos from iphone 4s to pc.  Why do I get black screen but have sound?

    Ok I checked and unchecked the playback via camera yesterday and I got black screen both times.
    I could delete the imovie prefs when I go over there today.
    I'll try another FW cable but it worked perfectly for importing but what the heck I've got one I'll try it.
    Yes camera was set to play and not record.
    Plenty of free space -- 131 GB.
    I'm pretty sure it's in NTSC DV format, but it's someone else's computer so it could have been changed by someone screwin' around not knowing what they're doing making changes.
    PowerMac FW800 (G4), iBook 1.42 G4 SuperDrive   Mac OS X (10.4.10)  

  • Black screen and "IOBluetoothHCIContrller::start Idle Timer Stopped"

    When I turn on my macbook pro, 2007, intel, mac osx 10.4.1, all I see is a Black screen and "IOBluetoothHCIContrller::start Idle Timer Stopped".  I have tried resetting PRAM, SMC, turning on with R-command, S-Command, V- control, and I can not get passed this screen.  DOes anyone have any idea of how to fix this?

    I also reset the System Management Controller:
    http://docs.info.apple.com/article.html?artnum=303446
    ...and tried booting diagnostics (D Key), both also to no avail.

  • IPhone 6 black screen but works

    After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
    Any Suggestions?
    Many thanks
    iPhone 6 running the latest iOS

    IIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty. 

Maybe you are looking for

  • I cannot configure pop account in mail, says it is offline.  What to do?

    I cannot configure pop account in mail, says it is offline.  What to do?

  • Error while translating message to native format: ORABPEL-11017

    please help me out in resolving the problem , please post me reply ASAP. <bindingFault xmlns="http://schemas.oracle.com/bpel/extension"> -<part name="code"> <code>null </code> </part> -<part name="summary"> <summary> file:/C:/product/10.1.3.1/OracleA

  • How to compare closeness of pixels?

    i'd like to create a photomosaic generator. the difficult part is to determine the best matching picture (from a database of pictures) to replace a tiled section of the original picture. given tile, pic0, pic1 (all bufferedimage objects of the same d

  • Backup drive keeps rotating after shutting down the iMac

    Hi, since I installed Leopard, my backup drive (LaCie USB) stays in operational mode after I shut down the iMac (intel 20"). When I choose to shut down the mac, the drive starts to rotate but doesn't stop... Under Tiger this wasn't an issue. I think

  • Iphoto 9.4.2 crashes on photo import

    Process:         iPhoto [1559] Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:      com.apple.iPhoto Version:         9.4.2 (9.4.2) Build Info:      iPhotoProject-710042000000000~1 Code Type:       X86 (Native) Parent Proc